From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srinivas Kandagatla Subject: [PATCH v2 2/2] ARM: dts: sd_600eval: Fix eMMC lockup issue Date: Fri, 10 Jun 2016 19:19:55 +0100 Message-ID: <1465582795-30266-2-git-send-email-srinivas.kandagatla@linaro.org> References: <1465582795-30266-1-git-send-email-srinivas.kandagatla@linaro.org> Return-path: In-Reply-To: <1465582795-30266-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andy Gross Cc: Rob Herring , David Brown , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Parth Pancholi List-Id: devicetree@vger.kernel.org From: Parth Pancholi This board locks up if we stress test the eMMC, as the regulator s4 is unable to supply enough current for all the peripherials attached to it. As this supply is wired up to most of the peripherials including DDR, it resulted in such lockup. This patch fixes this issue by setting s4 regulator correctly with Auto power mode. Reported-by: Srinivas Kandagatla [Srinivas Kandagatla: rewrote the change log] Tested-by: Girish Sharma Signed-off-by: Parth Pancholi --- arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index 7df0108..39ae2bc 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -1,6 +1,7 @@ #include "qcom-apq8064-v2.0.dtsi" #include "qcom-apq8064-arrow-sd-600eval-pins.dtsi" #include +#include / { model = "Arrow Electronics, APQ8064 SD_600eval"; @@ -82,7 +83,8 @@ s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; + qcom,switch-mode-frequency = <1600000>; + qcom,force-mode = ; bias-pull-down; regulator-always-on; }; -- 2.8.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html