From: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
To: Milo Kim <milo.kim-l0cyMroinI0@public.gmane.org>,
Jingoo Han <jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Stephen Barber <smbarber-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Jean-Christophe Plagniol-Villard
<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
Brian Norris
<briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2] backlight: lp855x: Add enable regulator
Date: Fri, 10 Jun 2016 12:39:57 -0700 [thread overview]
Message-ID: <1465587597-131467-1-git-send-email-briannorris@chromium.org> (raw)
The LP8556 datasheet describes an EN/VDDIO input, which serves "both as
a chip enable and as a power supply reference for PWM, SDA, and SCL
inputs." The LP8556 that I'm testing doesn't respond properly if I try
to talk I2C to it too quickly after enabling VDDIO, and the LP8555
datasheet mentions a t_RESPONSE delay of up to 1 millisecond.
Support this EN/VDDIO by adding a regulator property to the binding;
enabling this regulator at probe time; and sleeping for 1 to 2ms, if the
EN/VDDIO regulator was provided.
Signed-off-by: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
v2: s/TS8555/LP8555/ in comment (typo)
.../devicetree/bindings/leds/backlight/lp855x.txt | 2 ++
drivers/video/backlight/lp855x_bl.c | 29 ++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
index 0a3ecbc3a1b9..88f56641fc28 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
@@ -13,6 +13,7 @@ Optional properties:
- rom-addr: Register address of ROM area to be updated (u8)
- rom-val: Register value to be updated (u8)
- power-supply: Regulator which controls the 3V rail
+ - enable-supply: Regulator which controls the EN/VDDIO input
Example:
@@ -57,6 +58,7 @@ Example:
backlight@2c {
compatible = "ti,lp8557";
reg = <0x2c>;
+ enable-supply = <&backlight_vddio>;
power-supply = <&backlight_vdd>;
dev-ctrl = /bits/ 8 <0x41>;
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index e5b14f52628f..939f057836e1 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/backlight.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_data/lp855x.h>
@@ -74,6 +75,7 @@ struct lp855x {
struct lp855x_platform_data *pdata;
struct pwm_device *pwm;
struct regulator *supply; /* regulator for VDD input */
+ struct regulator *enable; /* regulator for EN/VDDIO input */
};
static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
@@ -433,6 +435,19 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
lp->supply = NULL;
}
+ lp->enable = devm_regulator_get_optional(lp->dev, "enable");
+ if (IS_ERR(lp->enable)) {
+ ret = PTR_ERR(lp->enable);
+ if (ret == -ENODEV) {
+ lp->enable = NULL;
+ } else {
+ if (ret != -EPROBE_DEFER)
+ dev_err(lp->dev, "error getting enable regulator: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
if (lp->supply) {
ret = regulator_enable(lp->supply);
if (ret < 0) {
@@ -441,6 +456,20 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
}
}
+ if (lp->enable) {
+ ret = regulator_enable(lp->enable);
+ if (ret < 0) {
+ dev_err(lp->dev, "failed to enable vddio: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * LP8555 datasheet says t_RESPONSE (time between VDDIO and
+ * I2C) is 1ms.
+ */
+ usleep_range(1000, 2000);
+ }
+
i2c_set_clientdata(cl, lp);
ret = lp855x_configure(lp);
--
2.8.0.rc3.226.g39d4020
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-06-10 19:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 19:39 Brian Norris [this message]
[not found] ` <1465587597-131467-1-git-send-email-briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-06-10 23:52 ` [PATCH v2] backlight: lp855x: Add enable regulator Stephen Barber
2016-06-13 1:05 ` Kim, Milo
2016-06-14 20:09 ` Rob Herring
2016-06-15 8:34 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465587597-131467-1-git-send-email-briannorris@chromium.org \
--to=briannorris-f7+t8e8rja9g9huczpvpmw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=milo.kim-l0cyMroinI0@public.gmane.org \
--cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
--cc=smbarber-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).