From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v2 17/17] sh: landisk CPLD interrupt controller driver
Date: Sun, 12 Jun 2016 16:44:14 +0900 [thread overview]
Message-ID: <1465717454-7606-1-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1465714475-24111-18-git-send-email-ysato@users.sourceforge.jp>
Sorry. I send old patches.
Please ignore previous files.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../interrupt-controller/iodata-landisk.txt | 28 +++++++++
drivers/irqchip/irq-io-landisk.c | 72 ++++++++++++++++++++++
2 files changed, 100 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
create mode 100644 drivers/irqchip/irq-io-landisk.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
new file mode 100644
index 0000000..d398538
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
@@ -0,0 +1,28 @@
+DT bindings for the I/O DATA HDL-U interrupt controller
+
+Required properties:
+
+ - compatible: has to be "iodata,landisk-intc".
+
+ - reg: Base address and length of interrupt controller register.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+
+ - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined
+ in interrupts.txt in this directory.
+
+ - interrupt-map: Interrupt mapping on parent controller.
+
+Example
+-------
+
+ cpldintc: cpld@b0000000 {
+ compatible = "iodata,landisk-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xb0000000 8>;
+ interrupt-map=<0 &shintc 0 0>, <1 &shintc 1 0>,
+ <2 &shintc 2 0>, <3 &shintc 3 0>,
+ <4 &shintc 4 0>, <5 &shintc 5 0>,
+ <6 &shintc 6 0>, <7 &shintc 7 0>;
+ };
diff --git a/drivers/irqchip/irq-io-landisk.c b/drivers/irqchip/irq-io-landisk.c
new file mode 100644
index 0000000..7db20d6
--- /dev/null
+++ b/drivers/irqchip/irq-io-landisk.c
@@ -0,0 +1,72 @@
+/*
+ * IO-DATA LANDISK CPLD IRQ driver
+ *
+ * Copyright 2016 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+static void landisk_mask_irq(struct irq_data *data)
+{
+ u8 mask = __raw_readb(data->chip_data + 5);
+
+ mask &= !(1 << (data->irq - 5));
+ __raw_writeb(mask, data->chip_data + 5);
+}
+
+static void landisk_unmask_irq(struct irq_data *data)
+{
+ u8 mask = __raw_readb(data->chip_data + 5);
+
+ mask |= (1 << (data->irq - 5));
+ __raw_writeb(mask, data->chip_data + 5);
+}
+
+static struct irq_chip cpld_irq_chip = {
+ .name = "LANDISK-CPLD",
+ .irq_unmask = landisk_unmask_irq,
+ .irq_mask = landisk_mask_irq,
+};
+
+static int cpld_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &cpld_irq_chip,
+ handle_simple_irq);
+ irq_set_chip_data(virq, d->host_data);
+
+ return 0;
+}
+
+static struct irq_domain_ops irq_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = cpld_map,
+};
+
+static int __init landisk_intc_of_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *pdomain;
+ int num_irqpin;
+ void *baseaddr;
+
+ baseaddr = of_iomap(intc, 0);
+ pdomain = irq_find_host(parent);
+ of_get_property(intc, "interrupt-map", &num_irqpin);
+ num_irqpin /= sizeof(u32) * 3;
+ domain = irq_domain_create_hierarchy(pdomain, 0, num_irqpin,
+ of_node_to_fwnode(intc),
+ &irq_ops, baseaddr);
+ if (!domain)
+ panic("%s: unable to create IRQ domain\n", intc->full_name);
+ irq_domain_associate_many(domain, 0, 0, 8);
+ return 0;
+}
+
+IRQCHIP_DECLARE(cpld_intc, "iodata,landisk-intc", landisk_intc_of_init);
--
2.7.0
next prev parent reply other threads:[~2016-06-12 7:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1465714475-24111-1-git-send-email-ysato@users.sourceforge.jp>
2016-06-12 6:54 ` [PATCH v2 12/17] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
2016-06-13 8:04 ` Geert Uytterhoeven
2016-06-13 8:38 ` Arnd Bergmann
2016-06-13 15:23 ` Yoshinori Sato
2016-06-12 6:54 ` [PATCH v2 14/17] sh: SH3/4 Generic IRQCHIP driever Yoshinori Sato
2016-06-12 7:43 ` Yoshinori Sato
2016-06-14 22:14 ` Rob Herring
2016-06-12 6:54 ` [PATCH v2 16/17] sh: I/O DATA HDL-U (a.k.a. landisk) Device Tree Yoshinori Sato
2016-06-13 8:13 ` Geert Uytterhoeven
2016-06-13 14:23 ` Yoshinori Sato
[not found] ` <1465714475-24111-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-06-12 6:54 ` [PATCH v2 17/17] sh: landisk CPLD interrupt controller driver Yoshinori Sato
2016-06-12 7:44 ` Yoshinori Sato [this message]
2016-06-14 22:24 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465717454-7606-1-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).