From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank Wang Subject: [PATCH v5 0/2] Add a new Rockchip usb2 phy driver Date: Mon, 13 Jun 2016 10:10:08 +0800 Message-ID: <1465783810-18756-1-git-send-email-frank.wang@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org, dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org, linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org, groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org, jwerner-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org, kishon-l0cyMroinI0@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org Cc: huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, xzy.xu-TNX95d0MmH7DzftRWevZcw@public.gmane.org, frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org List-Id: devicetree@vger.kernel.org The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. These series patches add phy-rockchip-inno-usb2.c and the corresponding documentation. Changes in v5: - Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks. Changes in v4: - Used 'phy-supply' instead of 'vbus_*-supply'. Changes in v3: - Supplemented some hardware-description into the devicetree bindings. - Resolved the mapping defect between fixed value in driver and the property in devicetree. - Code cleanup. Changes in v2: - Specified more hardware-description into the devicetree bindings. - Optimized some process of driver. Frank Wang (2): Documentation: bindings: add DT documentation for Rockchip USB2PHY phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy .../bindings/phy/phy-rockchip-inno-usb2.txt | 64 ++ drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-rockchip-inno-usb2.c | 645 ++++++++++++++++++++ 4 files changed, 717 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c -- 1.7.9.5