[PATCH v1 0/2] eeprom: at24: convert magic numbers to structs.

[PATCH v1 0/2] eeprom: at24: convert magic numbers to structs.

[Sven Van Asbroeck]

v1
	first shot

Sven Van Asbroeck (2):
  eeprom: at24: convert magic numbers to structs.
  eeprom: at24: remove temporary fix for at24mac402 size.

 drivers/misc/eeprom/at24.c | 229 ++++++++++++++++++++-------------------------
 1 file changed, 100 insertions(+), 129 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Sven Van Asbroeck]

Fundamental properties such as capacity and page size differ
among at24-type chips. But these chips do not have an id register,
so this can't be discovered at runtime.

Traditionally, at24-type eeprom properties were determined in two ways:
- by passing a 'struct at24_platform_data' via platform_data, or
- by naming the chip type in the devicetree, which passes a
	'magic number' to probe(), which is then converted to
	a 'struct at24_platform_data'.

Recently a bug was discovered because the magic number rounds down
all chip sizes to the lowest power of two. This was addressed by
a work-around, with the wish that magic numbers should over time
be converted to structs.

This patch replaces the magic numbers by 'struct at24_platform_data',
which eliminates the need for magic number -> platform_data conversion.

Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
---
 drivers/misc/eeprom/at24.c | 219 +++++++++++++++++++++------------------------
 1 file changed, 100 insertions(+), 119 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 625b001..d990c5d 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -105,16 +105,6 @@ struct at24_data {
 module_param(write_timeout, uint, 0);
 MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
 
-#define AT24_SIZE_BYTELEN 5
-#define AT24_SIZE_FLAGS 8
-
-#define AT24_BITMASK(x) (BIT(x) - 1)
-
-/* create non-zero magic value for given eeprom parameters */
-#define AT24_DEVICE_MAGIC(_len, _flags) 		\
-	((1 << AT24_SIZE_FLAGS | (_flags)) 		\
-	    << AT24_SIZE_BYTELEN | ilog2(_len))
-
 /*
  * Both reads and writes fail if the previous write didn't complete yet. This
  * macro loops a few times waiting at least long enough for one entire page
@@ -131,113 +121,111 @@ struct at24_data {
 	     op_time ? time_before(op_time, tout) : true;		\
 	     usleep_range(1000, 1500), op_time = jiffies)
 
+#define DECLARE_AT24_PLATDATA(_name, _len, _flags) \
+	static const struct at24_platform_data platdata_##_name = { \
+		.byte_len = _len, .flags = _flags, \
+	}
+
+#define AT24_I2C_DEVICE_ID(_name) \
+	{ #_name, (kernel_ulong_t)&platdata_##_name }
+
+#define AT24_ACPI_DEVICE_ID(_name) \
+	{ #_name, (kernel_ulong_t)&platdata_##_name }
+
+#define AT24_OF_DEVICE_ID(_mfg, _name) \
+	{ .compatible = #_mfg "," #_name, .data = &platdata_##_name }
+
+/* needs 8 addresses as A0-A2 are ignored */
+DECLARE_AT24_PLATDATA(24c00, 128 / 8, AT24_FLAG_TAKE8ADDR);
+/* old variants can't be handled with this generic entry! */
+DECLARE_AT24_PLATDATA(24c01, 1024 / 8, 0);
+DECLARE_AT24_PLATDATA(24cs01, 16, AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+DECLARE_AT24_PLATDATA(24c02, 2048 / 8,	0);
+DECLARE_AT24_PLATDATA(24cs02, 16, AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+DECLARE_AT24_PLATDATA(24mac402, 48 / 8,
+	AT24_FLAG_MAC | AT24_FLAG_READONLY);
+DECLARE_AT24_PLATDATA(24mac602, 64 / 8,
+	AT24_FLAG_MAC | AT24_FLAG_READONLY);
+/* spd is a 24c02 in memory DIMMs */
+DECLARE_AT24_PLATDATA(spd, 2048 / 8,
+	AT24_FLAG_READONLY | AT24_FLAG_IRUGO);
+DECLARE_AT24_PLATDATA(24c04, 4096 / 8,	0);
+DECLARE_AT24_PLATDATA(24cs04, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+/* 24rf08 quirk is handled at i2c-core */
+DECLARE_AT24_PLATDATA(24c08, 8192 / 8,	0);
+DECLARE_AT24_PLATDATA(24cs08, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+DECLARE_AT24_PLATDATA(24c16, 16384 / 8, 0);
+DECLARE_AT24_PLATDATA(24cs16, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+DECLARE_AT24_PLATDATA(24c32, 32768 / 8,	AT24_FLAG_ADDR16);
+DECLARE_AT24_PLATDATA(24cs32, 16,
+	AT24_FLAG_ADDR16 |
+	AT24_FLAG_SERIAL |
+	AT24_FLAG_READONLY);
+DECLARE_AT24_PLATDATA(24c64, 65536 / 8,	AT24_FLAG_ADDR16);
+DECLARE_AT24_PLATDATA(24cs64, 16,
+	AT24_FLAG_ADDR16 |
+	AT24_FLAG_SERIAL |
+	AT24_FLAG_READONLY);
+DECLARE_AT24_PLATDATA(24c128, 131072 / 8,	AT24_FLAG_ADDR16);
+DECLARE_AT24_PLATDATA(24c256, 262144 / 8,	AT24_FLAG_ADDR16);
+DECLARE_AT24_PLATDATA(24c512, 524288 / 8,	AT24_FLAG_ADDR16);
+DECLARE_AT24_PLATDATA(24c1024, 1048576 / 8,	AT24_FLAG_ADDR16);
+
 static const struct i2c_device_id at24_ids[] = {
-	/* needs 8 addresses as A0-A2 are ignored */
-	{ "24c00",	AT24_DEVICE_MAGIC(128 / 8,	AT24_FLAG_TAKE8ADDR) },
-	/* old variants can't be handled with this generic entry! */
-	{ "24c01",	AT24_DEVICE_MAGIC(1024 / 8,	0) },
-	{ "24cs01",	AT24_DEVICE_MAGIC(16,
-				AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
-	{ "24c02",	AT24_DEVICE_MAGIC(2048 / 8,	0) },
-	{ "24cs02",	AT24_DEVICE_MAGIC(16,
-				AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
-	{ "24mac402",	AT24_DEVICE_MAGIC(48 / 8,
-				AT24_FLAG_MAC | AT24_FLAG_READONLY) },
-	{ "24mac602",	AT24_DEVICE_MAGIC(64 / 8,
-				AT24_FLAG_MAC | AT24_FLAG_READONLY) },
-	/* spd is a 24c02 in memory DIMMs */
-	{ "spd",	AT24_DEVICE_MAGIC(2048 / 8,
-				AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
-	{ "24c04",	AT24_DEVICE_MAGIC(4096 / 8,	0) },
-	{ "24cs04",	AT24_DEVICE_MAGIC(16,
-				AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
-	/* 24rf08 quirk is handled at i2c-core */
-	{ "24c08",	AT24_DEVICE_MAGIC(8192 / 8,	0) },
-	{ "24cs08",	AT24_DEVICE_MAGIC(16,
-				AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
-	{ "24c16",	AT24_DEVICE_MAGIC(16384 / 8,	0) },
-	{ "24cs16",	AT24_DEVICE_MAGIC(16,
-				AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
-	{ "24c32",	AT24_DEVICE_MAGIC(32768 / 8,	AT24_FLAG_ADDR16) },
-	{ "24cs32",	AT24_DEVICE_MAGIC(16,
-				AT24_FLAG_ADDR16 |
-				AT24_FLAG_SERIAL |
-				AT24_FLAG_READONLY) },
-	{ "24c64",	AT24_DEVICE_MAGIC(65536 / 8,	AT24_FLAG_ADDR16) },
-	{ "24cs64",	AT24_DEVICE_MAGIC(16,
-				AT24_FLAG_ADDR16 |
-				AT24_FLAG_SERIAL |
-				AT24_FLAG_READONLY) },
-	{ "24c128",	AT24_DEVICE_MAGIC(131072 / 8,	AT24_FLAG_ADDR16) },
-	{ "24c256",	AT24_DEVICE_MAGIC(262144 / 8,	AT24_FLAG_ADDR16) },
-	{ "24c512",	AT24_DEVICE_MAGIC(524288 / 8,	AT24_FLAG_ADDR16) },
-	{ "24c1024",	AT24_DEVICE_MAGIC(1048576 / 8,	AT24_FLAG_ADDR16) },
+	AT24_I2C_DEVICE_ID(24c00),
+	AT24_I2C_DEVICE_ID(24c01),
+	AT24_I2C_DEVICE_ID(24cs01),
+	AT24_I2C_DEVICE_ID(24c02),
+	AT24_I2C_DEVICE_ID(24cs02),
+	AT24_I2C_DEVICE_ID(24mac402),
+	AT24_I2C_DEVICE_ID(24mac602),
+	AT24_I2C_DEVICE_ID(spd),
+	AT24_I2C_DEVICE_ID(24c04),
+	AT24_I2C_DEVICE_ID(24cs04),
+	AT24_I2C_DEVICE_ID(24c08),
+	AT24_I2C_DEVICE_ID(24cs08),
+	AT24_I2C_DEVICE_ID(24c16),
+	AT24_I2C_DEVICE_ID(24cs16),
+	AT24_I2C_DEVICE_ID(24c32),
+	AT24_I2C_DEVICE_ID(24cs32),
+	AT24_I2C_DEVICE_ID(24c64),
+	AT24_I2C_DEVICE_ID(24cs64),
+	AT24_I2C_DEVICE_ID(24c128),
+	AT24_I2C_DEVICE_ID(24c256),
+	AT24_I2C_DEVICE_ID(24c512),
+	AT24_I2C_DEVICE_ID(24c1024),
 	{ "at24", 0 },
 	{ /* END OF LIST */ }
 };
 MODULE_DEVICE_TABLE(i2c, at24_ids);
 
 static const struct of_device_id at24_of_match[] = {
-	{
-		.compatible = "atmel,24c00",
-		.data = (void *)AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR)
-	},
-	{
-		.compatible = "atmel,24c01",
-		.data = (void *)AT24_DEVICE_MAGIC(1024 / 8, 0)
-	},
-	{
-		.compatible = "atmel,24c02",
-		.data = (void *)AT24_DEVICE_MAGIC(2048 / 8, 0)
-	},
-	{
-		.compatible = "atmel,spd",
-		.data = (void *)AT24_DEVICE_MAGIC(2048 / 8,
-				AT24_FLAG_READONLY | AT24_FLAG_IRUGO)
-	},
-	{
-		.compatible = "atmel,24c04",
-		.data = (void *)AT24_DEVICE_MAGIC(4096 / 8, 0)
-	},
-	{
-		.compatible = "atmel,24c08",
-		.data = (void *)AT24_DEVICE_MAGIC(8192 / 8, 0)
-	},
-	{
-		.compatible = "atmel,24c16",
-		.data = (void *)AT24_DEVICE_MAGIC(16384 / 8, 0)
-	},
-	{
-		.compatible = "atmel,24c32",
-		.data = (void *)AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16)
-	},
-	{
-		.compatible = "atmel,24c64",
-		.data = (void *)AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16)
-	},
-	{
-		.compatible = "atmel,24c128",
-		.data = (void *)AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16)
-	},
-	{
-		.compatible = "atmel,24c256",
-		.data = (void *)AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16)
-	},
-	{
-		.compatible = "atmel,24c512",
-		.data = (void *)AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16)
-	},
-	{
-		.compatible = "atmel,24c1024",
-		.data = (void *)AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16)
-	},
-	{ },
+	AT24_OF_DEVICE_ID(atmel, 24c00),
+	AT24_OF_DEVICE_ID(atmel, 24c01),
+	AT24_OF_DEVICE_ID(atmel, 24c02),
+	AT24_OF_DEVICE_ID(atmel, spd),
+	AT24_OF_DEVICE_ID(atmel, 24c04),
+	AT24_OF_DEVICE_ID(atmel, 24c08),
+	AT24_OF_DEVICE_ID(atmel, 24c16),
+	AT24_OF_DEVICE_ID(atmel, 24c32),
+	AT24_OF_DEVICE_ID(atmel, 24c64),
+	AT24_OF_DEVICE_ID(atmel, 24c128),
+	AT24_OF_DEVICE_ID(atmel, 24c256),
+	AT24_OF_DEVICE_ID(atmel, 24c512),
+	AT24_OF_DEVICE_ID(atmel, 24c1024),
+	{ /* END OF LIST */ },
 };
 MODULE_DEVICE_TABLE(of, at24_of_match);
 
+/* identical to 24c08 ? */
+DECLARE_AT24_PLATDATA(INT3499, 8192 / 8, 0);
+
 static const struct acpi_device_id at24_acpi_ids[] = {
-	{ "INT3499", AT24_DEVICE_MAGIC(8192 / 8, 0) },
-	{ }
+	AT24_ACPI_DEVICE_ID(INT3499),
+	{ /* END OF LIST */ }
 };
 MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
 
@@ -511,7 +499,7 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
 static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct at24_platform_data chip;
-	kernel_ulong_t magic = 0;
+	const struct at24_platform_data *pd = NULL;
 	bool writable;
 	struct at24_data *at24;
 	int err;
@@ -529,28 +517,21 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 */
 		if (client->dev.of_node &&
 		    of_match_device(at24_of_match, &client->dev)) {
-			magic = (kernel_ulong_t)
-				of_device_get_match_data(&client->dev);
+			pd = of_device_get_match_data(&client->dev);
 		} else if (id) {
-			magic = id->driver_data;
+			pd = (void *)id->driver_data;
 		} else {
 			const struct acpi_device_id *aid;
 
 			aid = acpi_match_device(at24_acpi_ids, &client->dev);
 			if (aid)
-				magic = aid->driver_data;
+				pd = (void *)aid->driver_data;
 		}
-		if (!magic)
+		if (!pd)
 			return -ENODEV;
 
-		chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
-		magic >>= AT24_SIZE_BYTELEN;
-		chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
-
+		chip = *pd;
 		at24_get_pdata(&client->dev, &chip);
-
-		chip.setup = NULL;
-		chip.context = NULL;
 	}
 
 	if (!is_power_of_2(chip.byte_len))
-- 
1.9.1

[PATCH v1 2/2] eeprom: at24: remove temporary fix for at24mac402 size.

[Sven Van Asbroeck]

The chip size passed via devicetree, i2c, or acpi device ids is
now no longer limited to a power of two. So the temporary
fix can be removed.

Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
---
 drivers/misc/eeprom/at24.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index d990c5d..1845b62 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -545,16 +545,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		dev_warn(&client->dev,
 			"page_size looks suspicious (no power of 2)!\n");
 
-	/*
-	 * REVISIT: the size of the EUI-48 byte array is 6 in at24mac402, while
-	 * the call to ilog2() in AT24_DEVICE_MAGIC() rounds it down to 4.
-	 *
-	 * Eventually we'll get rid of the magic values altoghether in favor of
-	 * real structs, but for now just manually set the right size.
-	 */
-	if (chip.flags & AT24_FLAG_MAC && chip.byte_len == 4)
-		chip.byte_len = 6;
-
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C) &&
 	    !i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_WRITE_I2C_BLOCK))
-- 
1.9.1

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Bartosz Golaszewski]

2017-12-06 17:04 GMT+01:00 Sven Van Asbroeck <svendev-fuHqz3Nb1YI@public.gmane.org>:
> Fundamental properties such as capacity and page size differ
> among at24-type chips. But these chips do not have an id register,
> so this can't be discovered at runtime.
>
> Traditionally, at24-type eeprom properties were determined in two ways:
> - by passing a 'struct at24_platform_data' via platform_data, or
> - by naming the chip type in the devicetree, which passes a
>         'magic number' to probe(), which is then converted to
>         a 'struct at24_platform_data'.
>
> Recently a bug was discovered because the magic number rounds down
> all chip sizes to the lowest power of two. This was addressed by
> a work-around, with the wish that magic numbers should over time
> be converted to structs.
>
> This patch replaces the magic numbers by 'struct at24_platform_data',
> which eliminates the need for magic number -> platform_data conversion.
>
> Signed-off-by: Sven Van Asbroeck <svendev-fuHqz3Nb1YI@public.gmane.org>
> ---

Hi Sven,

I think this series will be a good first step in improving the device
tree support. Comments below.

>  drivers/misc/eeprom/at24.c | 219 +++++++++++++++++++++------------------------
>  1 file changed, 100 insertions(+), 119 deletions(-)
>
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index 625b001..d990c5d 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -105,16 +105,6 @@ struct at24_data {
>  module_param(write_timeout, uint, 0);
>  MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
>
> -#define AT24_SIZE_BYTELEN 5
> -#define AT24_SIZE_FLAGS 8
> -
> -#define AT24_BITMASK(x) (BIT(x) - 1)
> -
> -/* create non-zero magic value for given eeprom parameters */
> -#define AT24_DEVICE_MAGIC(_len, _flags)                \
> -       ((1 << AT24_SIZE_FLAGS | (_flags))              \
> -           << AT24_SIZE_BYTELEN | ilog2(_len))
> -
>  /*
>   * Both reads and writes fail if the previous write didn't complete yet. This
>   * macro loops a few times waiting at least long enough for one entire page
> @@ -131,113 +121,111 @@ struct at24_data {
>              op_time ? time_before(op_time, tout) : true;               \
>              usleep_range(1000, 1500), op_time = jiffies)
>
> +#define DECLARE_AT24_PLATDATA(_name, _len, _flags) \
> +       static const struct at24_platform_data platdata_##_name = { \
> +               .byte_len = _len, .flags = _flags, \
> +       }
> +

Using platform data here will increase the code size significantly.
Let's create a separate structure with only the necessary fields.
Also: please have the AT24/at24 prefix for symbols in the driver. I'd
go for simple AT24_CHIP_DATA() here. Also: platdata_##_name should
become at24_data_##_name.

> +#define AT24_I2C_DEVICE_ID(_name) \
> +       { #_name, (kernel_ulong_t)&platdata_##_name }
> +
> +#define AT24_ACPI_DEVICE_ID(_name) \
> +       { #_name, (kernel_ulong_t)&platdata_##_name }
> +
> +#define AT24_OF_DEVICE_ID(_mfg, _name) \
> +       { .compatible = #_mfg "," #_name, .data = &platdata_##_name }

I don't like hiding the way the compatible is created here from the
user. It doesn't save any code neither. Please make the macro accept
the whole compatible string.

> +
> +/* needs 8 addresses as A0-A2 are ignored */
> +DECLARE_AT24_PLATDATA(24c00, 128 / 8, AT24_FLAG_TAKE8ADDR);
> +/* old variants can't be handled with this generic entry! */
> +DECLARE_AT24_PLATDATA(24c01, 1024 / 8, 0);
> +DECLARE_AT24_PLATDATA(24cs01, 16, AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
> +DECLARE_AT24_PLATDATA(24c02, 2048 / 8, 0);
> +DECLARE_AT24_PLATDATA(24cs02, 16, AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
> +DECLARE_AT24_PLATDATA(24mac402, 48 / 8,
> +       AT24_FLAG_MAC | AT24_FLAG_READONLY);
> +DECLARE_AT24_PLATDATA(24mac602, 64 / 8,
> +       AT24_FLAG_MAC | AT24_FLAG_READONLY);
> +/* spd is a 24c02 in memory DIMMs */
> +DECLARE_AT24_PLATDATA(spd, 2048 / 8,
> +       AT24_FLAG_READONLY | AT24_FLAG_IRUGO);
> +DECLARE_AT24_PLATDATA(24c04, 4096 / 8, 0);
> +DECLARE_AT24_PLATDATA(24cs04, 16,
> +       AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
> +/* 24rf08 quirk is handled at i2c-core */
> +DECLARE_AT24_PLATDATA(24c08, 8192 / 8, 0);
> +DECLARE_AT24_PLATDATA(24cs08, 16,
> +       AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
> +DECLARE_AT24_PLATDATA(24c16, 16384 / 8, 0);
> +DECLARE_AT24_PLATDATA(24cs16, 16,
> +       AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
> +DECLARE_AT24_PLATDATA(24c32, 32768 / 8,        AT24_FLAG_ADDR16);
> +DECLARE_AT24_PLATDATA(24cs32, 16,
> +       AT24_FLAG_ADDR16 |
> +       AT24_FLAG_SERIAL |
> +       AT24_FLAG_READONLY);
> +DECLARE_AT24_PLATDATA(24c64, 65536 / 8,        AT24_FLAG_ADDR16);
> +DECLARE_AT24_PLATDATA(24cs64, 16,
> +       AT24_FLAG_ADDR16 |
> +       AT24_FLAG_SERIAL |
> +       AT24_FLAG_READONLY);
> +DECLARE_AT24_PLATDATA(24c128, 131072 / 8,      AT24_FLAG_ADDR16);
> +DECLARE_AT24_PLATDATA(24c256, 262144 / 8,      AT24_FLAG_ADDR16);
> +DECLARE_AT24_PLATDATA(24c512, 524288 / 8,      AT24_FLAG_ADDR16);
> +DECLARE_AT24_PLATDATA(24c1024, 1048576 / 8,    AT24_FLAG_ADDR16);
> +
>  static const struct i2c_device_id at24_ids[] = {
> -       /* needs 8 addresses as A0-A2 are ignored */
> -       { "24c00",      AT24_DEVICE_MAGIC(128 / 8,      AT24_FLAG_TAKE8ADDR) },
> -       /* old variants can't be handled with this generic entry! */
> -       { "24c01",      AT24_DEVICE_MAGIC(1024 / 8,     0) },
> -       { "24cs01",     AT24_DEVICE_MAGIC(16,
> -                               AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> -       { "24c02",      AT24_DEVICE_MAGIC(2048 / 8,     0) },
> -       { "24cs02",     AT24_DEVICE_MAGIC(16,
> -                               AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> -       { "24mac402",   AT24_DEVICE_MAGIC(48 / 8,
> -                               AT24_FLAG_MAC | AT24_FLAG_READONLY) },
> -       { "24mac602",   AT24_DEVICE_MAGIC(64 / 8,
> -                               AT24_FLAG_MAC | AT24_FLAG_READONLY) },
> -       /* spd is a 24c02 in memory DIMMs */
> -       { "spd",        AT24_DEVICE_MAGIC(2048 / 8,
> -                               AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
> -       { "24c04",      AT24_DEVICE_MAGIC(4096 / 8,     0) },
> -       { "24cs04",     AT24_DEVICE_MAGIC(16,
> -                               AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> -       /* 24rf08 quirk is handled at i2c-core */
> -       { "24c08",      AT24_DEVICE_MAGIC(8192 / 8,     0) },
> -       { "24cs08",     AT24_DEVICE_MAGIC(16,
> -                               AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> -       { "24c16",      AT24_DEVICE_MAGIC(16384 / 8,    0) },
> -       { "24cs16",     AT24_DEVICE_MAGIC(16,
> -                               AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> -       { "24c32",      AT24_DEVICE_MAGIC(32768 / 8,    AT24_FLAG_ADDR16) },
> -       { "24cs32",     AT24_DEVICE_MAGIC(16,
> -                               AT24_FLAG_ADDR16 |
> -                               AT24_FLAG_SERIAL |
> -                               AT24_FLAG_READONLY) },
> -       { "24c64",      AT24_DEVICE_MAGIC(65536 / 8,    AT24_FLAG_ADDR16) },
> -       { "24cs64",     AT24_DEVICE_MAGIC(16,
> -                               AT24_FLAG_ADDR16 |
> -                               AT24_FLAG_SERIAL |
> -                               AT24_FLAG_READONLY) },
> -       { "24c128",     AT24_DEVICE_MAGIC(131072 / 8,   AT24_FLAG_ADDR16) },
> -       { "24c256",     AT24_DEVICE_MAGIC(262144 / 8,   AT24_FLAG_ADDR16) },
> -       { "24c512",     AT24_DEVICE_MAGIC(524288 / 8,   AT24_FLAG_ADDR16) },
> -       { "24c1024",    AT24_DEVICE_MAGIC(1048576 / 8,  AT24_FLAG_ADDR16) },
> +       AT24_I2C_DEVICE_ID(24c00),
> +       AT24_I2C_DEVICE_ID(24c01),
> +       AT24_I2C_DEVICE_ID(24cs01),
> +       AT24_I2C_DEVICE_ID(24c02),
> +       AT24_I2C_DEVICE_ID(24cs02),
> +       AT24_I2C_DEVICE_ID(24mac402),
> +       AT24_I2C_DEVICE_ID(24mac602),
> +       AT24_I2C_DEVICE_ID(spd),
> +       AT24_I2C_DEVICE_ID(24c04),
> +       AT24_I2C_DEVICE_ID(24cs04),
> +       AT24_I2C_DEVICE_ID(24c08),
> +       AT24_I2C_DEVICE_ID(24cs08),
> +       AT24_I2C_DEVICE_ID(24c16),
> +       AT24_I2C_DEVICE_ID(24cs16),
> +       AT24_I2C_DEVICE_ID(24c32),
> +       AT24_I2C_DEVICE_ID(24cs32),
> +       AT24_I2C_DEVICE_ID(24c64),
> +       AT24_I2C_DEVICE_ID(24cs64),
> +       AT24_I2C_DEVICE_ID(24c128),
> +       AT24_I2C_DEVICE_ID(24c256),
> +       AT24_I2C_DEVICE_ID(24c512),
> +       AT24_I2C_DEVICE_ID(24c1024),
>         { "at24", 0 },
>         { /* END OF LIST */ }
>  };
>  MODULE_DEVICE_TABLE(i2c, at24_ids);
>
>  static const struct of_device_id at24_of_match[] = {
> -       {
> -               .compatible = "atmel,24c00",
> -               .data = (void *)AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR)
> -       },
> -       {
> -               .compatible = "atmel,24c01",
> -               .data = (void *)AT24_DEVICE_MAGIC(1024 / 8, 0)
> -       },
> -       {
> -               .compatible = "atmel,24c02",
> -               .data = (void *)AT24_DEVICE_MAGIC(2048 / 8, 0)
> -       },
> -       {
> -               .compatible = "atmel,spd",
> -               .data = (void *)AT24_DEVICE_MAGIC(2048 / 8,
> -                               AT24_FLAG_READONLY | AT24_FLAG_IRUGO)
> -       },
> -       {
> -               .compatible = "atmel,24c04",
> -               .data = (void *)AT24_DEVICE_MAGIC(4096 / 8, 0)
> -       },
> -       {
> -               .compatible = "atmel,24c08",
> -               .data = (void *)AT24_DEVICE_MAGIC(8192 / 8, 0)
> -       },
> -       {
> -               .compatible = "atmel,24c16",
> -               .data = (void *)AT24_DEVICE_MAGIC(16384 / 8, 0)
> -       },
> -       {
> -               .compatible = "atmel,24c32",
> -               .data = (void *)AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16)
> -       },
> -       {
> -               .compatible = "atmel,24c64",
> -               .data = (void *)AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16)
> -       },
> -       {
> -               .compatible = "atmel,24c128",
> -               .data = (void *)AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16)
> -       },
> -       {
> -               .compatible = "atmel,24c256",
> -               .data = (void *)AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16)
> -       },
> -       {
> -               .compatible = "atmel,24c512",
> -               .data = (void *)AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16)
> -       },
> -       {
> -               .compatible = "atmel,24c1024",
> -               .data = (void *)AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16)
> -       },
> -       { },
> +       AT24_OF_DEVICE_ID(atmel, 24c00),
> +       AT24_OF_DEVICE_ID(atmel, 24c01),
> +       AT24_OF_DEVICE_ID(atmel, 24c02),
> +       AT24_OF_DEVICE_ID(atmel, spd),
> +       AT24_OF_DEVICE_ID(atmel, 24c04),
> +       AT24_OF_DEVICE_ID(atmel, 24c08),
> +       AT24_OF_DEVICE_ID(atmel, 24c16),
> +       AT24_OF_DEVICE_ID(atmel, 24c32),
> +       AT24_OF_DEVICE_ID(atmel, 24c64),
> +       AT24_OF_DEVICE_ID(atmel, 24c128),
> +       AT24_OF_DEVICE_ID(atmel, 24c256),
> +       AT24_OF_DEVICE_ID(atmel, 24c512),
> +       AT24_OF_DEVICE_ID(atmel, 24c1024),
> +       { /* END OF LIST */ },
>  };
>  MODULE_DEVICE_TABLE(of, at24_of_match);
>
> +/* identical to 24c08 ? */
> +DECLARE_AT24_PLATDATA(INT3499, 8192 / 8, 0);

Keep all these defines grouped together above.

> +
>  static const struct acpi_device_id at24_acpi_ids[] = {
> -       { "INT3499", AT24_DEVICE_MAGIC(8192 / 8, 0) },
> -       { }
> +       AT24_ACPI_DEVICE_ID(INT3499),
> +       { /* END OF LIST */ }
>  };
>  MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
>
> @@ -511,7 +499,7 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
>  static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  {
>         struct at24_platform_data chip;
> -       kernel_ulong_t magic = 0;
> +       const struct at24_platform_data *pd = NULL;
>         bool writable;
>         struct at24_data *at24;
>         int err;
> @@ -529,28 +517,21 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
>                  */
>                 if (client->dev.of_node &&
>                     of_match_device(at24_of_match, &client->dev)) {
> -                       magic = (kernel_ulong_t)
> -                               of_device_get_match_data(&client->dev);
> +                       pd = of_device_get_match_data(&client->dev);
>                 } else if (id) {
> -                       magic = id->driver_data;
> +                       pd = (void *)id->driver_data;
>                 } else {
>                         const struct acpi_device_id *aid;
>
>                         aid = acpi_match_device(at24_acpi_ids, &client->dev);
>                         if (aid)
> -                               magic = aid->driver_data;
> +                               pd = (void *)aid->driver_data;
>                 }
> -               if (!magic)
> +               if (!pd)
>                         return -ENODEV;
>
> -               chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
> -               magic >>= AT24_SIZE_BYTELEN;
> -               chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
> -
> +               chip = *pd;
>                 at24_get_pdata(&client->dev, &chip);
> -
> -               chip.setup = NULL;
> -               chip.context = NULL;
>         }
>
>         if (!is_power_of_2(chip.byte_len))
> --
> 1.9.1
>

Thanks,
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Sven Van Asbroeck]

Hi Bartosz, thanks for the encouragement !

Bartosz wrote:
> Also: please have the AT24/at24 prefix for symbols in the driver.

These specific symbols are declared static, i.e. they're visible only
inside at24.c.
Do you think they should still have an at24 prefix ?

+#define DECLARE_AT24_PLATDATA(_name, _len, _flags) \
+       static const struct at24_platform_data platdata_##_name = { \
+               .byte_len = _len, .flags = _flags, \
+       }

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Sven Van Asbroeck]

Bartosz wrote:
>> +#define AT24_OF_DEVICE_ID(_mfg, _name) \
>> +       { .compatible = #_mfg "," #_name, .data = &platdata_##_name }
>
> I don't like hiding the way the compatible is created here from the
> user. It doesn't save any code neither. Please make the macro accept
> the whole compatible string.
>

If the macro accepts the whole compatible string "mfg,chip-name" (e.g.
"atmel,24c01")
then how can I extract chip-name from that string? I need to attach
chip-name to the
platdata_ static structures. (e.g. "atmel,24c01" -> .data = platdata_24c01)

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Bartosz Golaszewski]

2017-12-08 15:10 GMT+01:00 Sven Van Asbroeck <thesven73-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
> Hi Bartosz, thanks for the encouragement !
>
> Bartosz wrote:
>> Also: please have the AT24/at24 prefix for symbols in the driver.
>
> These specific symbols are declared static, i.e. they're visible only
> inside at24.c.
> Do you think they should still have an at24 prefix ?
>
> +#define DECLARE_AT24_PLATDATA(_name, _len, _flags) \
> +       static const struct at24_platform_data platdata_##_name = { \
> +               .byte_len = _len, .flags = _flags, \
> +       }

Yes, it's a common pattern in the kernel and it adds to readability.

Thanks,
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Bartosz Golaszewski]

2017-12-08 15:17 GMT+01:00 Sven Van Asbroeck <thesven73-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
> Bartosz wrote:
>>> +#define AT24_OF_DEVICE_ID(_mfg, _name) \
>>> +       { .compatible = #_mfg "," #_name, .data = &platdata_##_name }
>>
>> I don't like hiding the way the compatible is created here from the
>> user. It doesn't save any code neither. Please make the macro accept
>> the whole compatible string.
>>
>
> If the macro accepts the whole compatible string "mfg,chip-name" (e.g.
> "atmel,24c01")
> then how can I extract chip-name from that string? I need to attach
> chip-name to the
> platdata_ static structures. (e.g. "atmel,24c01" -> .data = platdata_24c01)

Just make it accept two parameters: the string and the data object
name. For example:

AT24_OF_DEVICE_ID("atmel,24c01", 24c01);

Thanks,
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Sven Van Asbroeck]

Bartosz wrote:
> Just make it accept two parameters: the string and the data object
> name. For example:
>
> AT24_OF_DEVICE_ID("atmel,24c01", 24c01);
>

I don't want to do too much bikeshedding,
but one last comment.

Is it a good idea to have duplicated information?
Do you think the risk of a typo mismatch is acceptable? E.g.
AT24_OF_DEVICE_ID("atmel,24c01", 24c02);

At least the original syntax is not susceptible to this problem,
but of course as you say, it hides the of_ compatible string:
AT24_OF_DEVICE_ID(atmel, 24c01);
/* hides 'atmel,24c01' */

Pros and cons. Pick one.

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Bartosz Golaszewski]

2017-12-08 16:25 GMT+01:00 Sven Van Asbroeck <thesven73-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
> Bartosz wrote:
>>
>> Just make it accept two parameters: the string and the data object
>> name. For example:
>>
>>
> AT24_OF_DEVICE_ID("atmel,24c01", 24c01);
>>
>
> I don't want to do too much bikeshedding,
> but one last comment.
>
> Is it a good idea to have duplicated information?
> Do you think the risk of a typo mismatch is acceptable? E.g.
> AT24_OF_DEVICE_ID("atmel,24c01", 24c0
> 2
> );
> At least the original syntax is not susceptible to this problem,
> but of course as you say, it hides the of_ compatible string:
> AT24_OF_DEVICE_ID(atmel, 24c01);
> /* hides 'atmel,24c01' */
>
> Pros and cons. Pick one.

Nah, there aren't like two thousand compatible chips so that a mistake
would go unnoticed.

Bartosz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Peter Rosin]

On 2017-12-08 16:28, Sven Van Asbroeck wrote:
> Bartosz wrote:
>> Just make it accept two parameters: the string and the data object
>> name. For example:
>>
>> AT24_OF_DEVICE_ID("atmel,24c01", 24c01);
>>
> 
> I don't want to do too much bikeshedding,
> but one last comment.
> 
> Is it a good idea to have duplicated information?
> Do you think the risk of a typo mismatch is acceptable? E.g.
> AT24_OF_DEVICE_ID("atmel,24c01", 24c02);
> 
> At least the original syntax is not susceptible to this problem,
> but of course as you say, it hides the of_ compatible string:
> AT24_OF_DEVICE_ID(atmel, 24c01);
> /* hides 'atmel,24c01' */

It's nice to be able to grep for compatible strings.

$.02

/peda

Re: [PATCH v1 1/2] eeprom: at24: convert magic numbers to structs.

[Sven Van Asbroeck]

peda wrote:
> It's nice to be able to grep for compatible strings.
>
> $.02
>

Indeed. Bartosz and Peter, I think you're right.
Expect a v2 soon.