From: Ludovic Barre <ludovic.Barre@st.com>
To: Russell King <linux@armlinux.org.uk>,
Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>
Cc: devicetree@vger.kernel.org,
Alexandre Torgue <alexandre.torgue@st.com>,
linux-kernel@vger.kernel.org,
Ludovic Barre <ludovic.barre@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] ARM: stm32: add initial STM32MPU support
Date: Fri, 8 Dec 2017 15:11:11 +0100 [thread overview]
Message-ID: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com> (raw)
From: Ludovic Barre <ludovic.barre@st.com>
This patch series extends the existing STM32 microcontrollers (MCUs)
family to microprocessors (MPUs). The MPU platform (based on
Arm Cortex-A) is a continuation of the MCU one (based on Arm
Cortex-M) in that it shares a wide number of hardware blocks.
Ludovic Barre (6):
ARM: stm32: prepare stm32 family to welcome armv7 architecture
ARM: stm32: add initial support for STM32MP157
pinctrl: stm32: Add STM32MP157 MPU support
ARM: configs: multi_v7: add stm32 support
ARM: dts: stm32: add stm32mp157c initial support
ARM: dts: stm32: add initial support of stm32mp157c eval board
Documentation/arm/stm32/overview.txt | 21 +-
Documentation/arm/stm32/stm32mp157-overview.txt | 12 +
Documentation/devicetree/bindings/arm/stm32.txt | 1 +
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +
arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++
arch/arm/configs/multi_v7_defconfig | 2 +
arch/arm/mach-stm32/Kconfig | 48 +-
arch/arm/mach-stm32/Makefile | 3 +-
arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
arch/arm/mach-stm32/board-mpu-dt.c | 16 +
drivers/pinctrl/stm32/Kconfig | 6 +
drivers/pinctrl/stm32/Makefile | 1 +
drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
17 files changed, 2656 insertions(+), 21 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
--
2.7.4
next reply other threads:[~2017-12-08 14:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 14:11 Ludovic Barre [this message]
[not found] ` <1512742277-28205-1-git-send-email-ludovic.Barre-qxv4g6HH51o@public.gmane.org>
2017-12-08 14:11 ` [PATCH 1/6] ARM: stm32: prepare stm32 family to welcome armv7 architecture Ludovic Barre
2017-12-11 10:25 ` Linus Walleij
[not found] ` <CACRpkdaKZk5N9F=_nYSzKWyXgW4xQ9Ltft7-UNM+a-nOpqq2xg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-11 13:40 ` Arnd Bergmann
2017-12-11 14:22 ` Ludovic BARRE
2017-12-12 11:03 ` afzal mohammed
2017-12-12 13:32 ` Ludovic BARRE
2017-12-08 14:11 ` [PATCH 2/6] ARM: stm32: add initial support for STM32MP157 Ludovic Barre
2017-12-12 23:24 ` Rob Herring
2017-12-13 9:02 ` Ludovic BARRE
2017-12-08 14:11 ` [PATCH 4/6] ARM: configs: multi_v7: add stm32 support Ludovic Barre
2017-12-08 14:11 ` [PATCH 6/6] ARM: dts: stm32: add initial support of stm32mp157c eval board Ludovic Barre
2017-12-08 14:41 ` [PATCH 0/6] ARM: stm32: add initial STM32MPU support Neil Armstrong
2017-12-08 14:11 ` [PATCH 3/6] pinctrl: stm32: Add STM32MP157 MPU support Ludovic Barre
[not found] ` <1512742277-28205-4-git-send-email-ludovic.Barre-qxv4g6HH51o@public.gmane.org>
2017-12-12 23:25 ` Rob Herring
2017-12-08 14:11 ` [PATCH 5/6] ARM: dts: stm32: add stm32mp157c initial support Ludovic Barre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512742277-28205-1-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).