From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Wahren Subject: [PATCH 1/3] dt-bindings: bcm2836-l1-intc: add interrupt polarity support Date: Mon, 11 Dec 2017 21:39:10 +0100 Message-ID: <1513024752-11246-2-git-send-email-stefan.wahren@i2se.com> References: <1513024752-11246-1-git-send-email-stefan.wahren@i2se.com> Return-path: In-Reply-To: <1513024752-11246-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Thomas Gleixner , Jason Cooper , Marc Zyngier , Eric Anholt , Florian Fainelli , Scott Branden , Rob Herring , Mark Rutland Cc: Russell King , phil-FnsA7b+Nu9XbIbC87yuRow@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Stefan Wahren List-Id: devicetree@vger.kernel.org This increases the interrupt cells for the 1st level interrupt controller binding in order to describe the polarity like on the other ARM platforms. Signed-off-by: Stefan Wahren --- .../devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt index f320dcd..8ced169 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt @@ -12,7 +12,7 @@ Required properties: registers - interrupt-controller: Identifies the node as an interrupt controller - #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value shall be 1 + interrupt source. The value shall be 2 Please refer to interrupts.txt in this directory for details of the common Interrupt Controllers bindings used by client devices. @@ -32,6 +32,6 @@ local_intc: local_intc { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupt-parent = <&local_intc>; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html