From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ilia Lin Subject: [PATCH 06/10] clk: qcom: cpu-8996: Add support to switch below 600Mhz Date: Tue, 12 Dec 2017 14:31:33 +0200 Message-ID: <1513081897-31612-7-git-send-email-ilialin@codeaurora.org> References: <1513081897-31612-1-git-send-email-ilialin@codeaurora.org> Return-path: In-Reply-To: <1513081897-31612-1-git-send-email-ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, qualcomm-lt-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, celster-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, tfinkel-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org List-Id: devicetree@vger.kernel.org From: Rajendra Nayak The CPU clock controllers primary PLL operates on a single VCO range, between 600Mhz and 3Ghz. However the CPUs do support OPPs with frequencies between 300Mhz and 600Mhz. In order to support running the CPUs at those frequencies we end up having to lock the PLL at twice the rate and drive the CPU clk via the PLL/2 output and SMUX. So for frequencies above 600Mhz we follow the following path Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk and for frequencies between 300Mhz and 600Mhz we follow Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk Signed-off-by: Rajendra Nayak Signed-off-by: Ilia Lin --- drivers/clk/qcom/clk-cpu-8996.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c index 9bb25be..79db4e8 100644 --- a/drivers/clk/qcom/clk-cpu-8996.c +++ b/drivers/clk/qcom/clk-cpu-8996.c @@ -28,6 +28,7 @@ #define PLL_INDEX 1 #define ACD_INDEX 2 #define ALT_INDEX 3 +#define DIV_2_THRESHOLD 600000000 /* PLLs */ @@ -121,6 +122,7 @@ struct clk_cpu_8996_mux { u32 width; struct notifier_block nb; struct clk_hw *pll; + struct clk_hw *pll_div_2; struct clk_regmap clkr; }; @@ -171,6 +173,13 @@ static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index) if (!cpuclk->pll) return -EINVAL; + if (cpuclk->pll_div_2 && req->rate < DIV_2_THRESHOLD) { + if (req->rate < (DIV_2_THRESHOLD / 2)) + return -EINVAL; + + parent = cpuclk->pll_div_2; + } + req->best_parent_rate = clk_hw_round_rate(parent, req->rate); req->best_parent_hw = parent; @@ -182,13 +191,19 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, { int ret; struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_nb(nb); + struct clk_notifier_data *cnd = data; switch (event) { case PRE_RATE_CHANGE: ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, ALT_INDEX); break; case POST_RATE_CHANGE: - ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, PLL_INDEX); + if (cnd->new_rate < DIV_2_THRESHOLD) + ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, + DIV_2_INDEX); + else + ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, + PLL_INDEX); break; default: ret = 0; @@ -241,6 +256,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, .shift = 0, .width = 2, .pll = &pwrcl_pll.clkr.hw, + .pll_div_2 = &pwrcl_smux.clkr.hw, .nb.notifier_call = cpu_clk_notifier_cb, .clkr.hw.init = &(struct clk_init_data) { .name = "pwrcl_pmux", @@ -261,6 +277,7 @@ int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, .shift = 0, .width = 2, .pll = &perfcl_pll.clkr.hw, + .pll_div_2 = &perfcl_smux.clkr.hw, .nb.notifier_call = cpu_clk_notifier_cb, .clkr.hw.init = &(struct clk_init_data) { .name = "perfcl_pmux", -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html