From: Hugues Fruchet <hugues.fruchet-qxv4g6HH51o@public.gmane.org>
To: Steve Longerbeam
<slongerbeam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Sakari Ailus <sakari.ailus-X3B1VOXEql0@public.gmane.org>,
Hans Verkuil <hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>,
Mauro Carvalho Chehab
<mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Hugues Fruchet <hugues.fruchet-qxv4g6HH51o@public.gmane.org>,
Benjamin Gaignard
<benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v5 0/5] Add OV5640 parallel interface and RGB565/YUYV support
Date: Wed, 3 Jan 2018 10:57:27 +0100 [thread overview]
Message-ID: <1514973452-10464-1-git-send-email-hugues.fruchet@st.com> (raw)
Enhance OV5640 CSI driver to support also DVP parallel interface.
Add RGB565 (LE & BE) and YUV422 YUYV format in addition to existing
YUV422 UYVY format.
Some other improvements on chip identifier check and removal
of warnings in powering phase around gpio handling.
===========
= history =
===========
version 5:
- Refine bindings as per Sakari suggestion:
https://www.mail-archive.com/linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg124048.html
version 4:
- Refine bindings as per Sakari suggestion:
https://www.mail-archive.com/linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg123609.html
- Parallel port control lines polarity can now be configured through
devicetree
version 3:
- Move chip identifier check at probe according to Fabio Estevam comment:
https://www.mail-archive.com/linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg122575.html
- Use 16 bits register read for this check as per Steve Longerbeam comment:
https://www.mail-archive.com/linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg122692.html
- Update bindings to document parallel mode support as per Fabio Estevam comment:
https://www.mail-archive.com/linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg122576.html
- Enable the whole 10 bits parallel output and document 8/10 bits support
in ov5640_set_stream_dvp() to answer to Steve Longerbeam comment:
https://www.mail-archive.com/linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg122693.html
version 2:
- Fix comments from Sakari Ailus:
https://www.mail-archive.com/linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg122259.html
- Revisit ov5640_set_stream_dvp() to only configure DVP at streamon
- Revisit ov5640_set_stream_dvp() implementation with fewer register settings
version 1:
- Initial submission
Hugues Fruchet (5):
media: ov5640: switch to gpiod_set_value_cansleep()
media: ov5640: check chip id
media: dt-bindings: ov5640: refine CSI-2 and add parallel interface
media: ov5640: add support of DVP parallel interface
media: ov5640: add support of RGB565 and YUYV formats
.../devicetree/bindings/media/i2c/ov5640.txt | 46 ++-
drivers/media/i2c/ov5640.c | 325 ++++++++++++++++++---
2 files changed, 324 insertions(+), 47 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2018-01-03 9:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-03 9:57 Hugues Fruchet [this message]
[not found] ` <1514973452-10464-1-git-send-email-hugues.fruchet-qxv4g6HH51o@public.gmane.org>
2018-01-03 9:57 ` [PATCH v5 1/5] media: ov5640: switch to gpiod_set_value_cansleep() Hugues Fruchet
2018-01-03 9:57 ` [PATCH v5 2/5] media: ov5640: check chip id Hugues Fruchet
2018-01-03 9:57 ` [PATCH v5 3/5] media: dt-bindings: ov5640: refine CSI-2 and add parallel interface Hugues Fruchet
2018-01-05 18:41 ` Rob Herring
2018-01-03 9:57 ` [PATCH v5 4/5] media: ov5640: add support of DVP " Hugues Fruchet
[not found] ` <1514973452-10464-5-git-send-email-hugues.fruchet-qxv4g6HH51o@public.gmane.org>
2018-02-01 17:53 ` Fabrizio Castro
2018-02-02 18:50 ` Maxime Ripard
2018-02-05 11:42 ` Fabrizio Castro
[not found] ` <TY1PR06MB08954787E362BF24C7FD41DBC0FE0-/PRLmSCtZ16EeHdvShrxA20DtJ1/0DrXvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2018-02-05 13:56 ` Maxime Ripard
2018-01-08 15:38 ` [PATCH v5 0/5] Add OV5640 parallel interface and RGB565/YUYV support Maxime Ripard
2018-01-08 17:13 ` Hugues FRUCHET
2018-01-09 18:49 ` Maxime Ripard
[not found] ` <3010811e-ed37-4489-6a9f-6cc835f41575-qxv4g6HH51o@public.gmane.org>
2018-01-10 15:37 ` Maxime Ripard
2018-01-10 15:51 ` Hugues FRUCHET
[not found] ` <2089de18-1f7f-6d6e-7aee-9dc424bca335-qxv4g6HH51o@public.gmane.org>
2018-01-10 22:25 ` Sakari Ailus
2018-01-11 8:12 ` Hugues FRUCHET
[not found] ` <6661b493-5f2a-b201-390d-e3452e6873a0-qxv4g6HH51o@public.gmane.org>
2018-01-11 8:19 ` Sakari Ailus
[not found] ` <20180111081912.curkvpguof6ul555-S+BSfZ9RZZmRSg0ZkenSGLdO1Tsj/99ntUK59QYPAWc@public.gmane.org>
2018-01-11 8:25 ` Hugues FRUCHET
2018-01-11 9:18 ` Sakari Ailus
2018-01-11 12:37 ` Maxime Ripard
2018-01-11 1:15 ` Yong
[not found] ` <20180111091508.a0c9f630c6b4ef80178694fb-+3dxTMOEIRNWk0Htik3J/w@public.gmane.org>
2018-01-11 12:40 ` Maxime Ripard
[not found] ` <20180111124018.azdzjeitjsyenmra-ZC1Zs529Oq4@public.gmane.org>
2018-01-12 2:18 ` Yong
[not found] ` <20180112101839.cc13571a099d64eea2ac6e3a-+3dxTMOEIRNWk0Htik3J/w@public.gmane.org>
2018-01-12 9:04 ` Maxime Ripard
2018-01-03 9:57 ` [PATCH v5 5/5] media: ov5640: add support of RGB565 and YUYV formats Hugues Fruchet
2018-01-08 20:54 ` [PATCH v5 0/5] Add OV5640 parallel interface and RGB565/YUYV support Fabrizio Castro
[not found] ` <TY1PR06MB0895C74B45AF75CEB9F7AA4BC0130-/PRLmSCtZ16EeHdvShrxA20DtJ1/0DrXvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2018-01-09 8:48 ` Hugues FRUCHET
[not found] ` <a02789f0-d41c-7dfb-406c-fe29ccc0dc9e-qxv4g6HH51o@public.gmane.org>
2018-01-09 11:50 ` Fabrizio Castro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1514973452-10464-1-git-send-email-hugues.fruchet@st.com \
--to=hugues.fruchet-qxv4g6hh51o@public.gmane.org \
--cc=benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sakari.ailus-X3B1VOXEql0@public.gmane.org \
--cc=slongerbeam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).