From: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
To: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
Kevin Hilman <khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Bartosz Golaszewski
<bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Adam Ford <aford173-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
Subject: [PATCH v6 36/41] ARM: dm646x: Remove legacy clock init
Date: Sat, 20 Jan 2018 11:14:15 -0600 [thread overview]
Message-ID: <1516468460-4908-37-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1516468460-4908-1-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
This removes the unused legacy clock init code from
arch/arm/mach-davinci/dm646x.c.
Signed-off-by: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
---
v6 changes:
- none
arch/arm/mach-davinci/dm646x.c | 329 +----------------------------------------
1 file changed, 1 insertion(+), 328 deletions(-)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index ee07e41..98b076f 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -33,11 +33,6 @@
#include "davinci.h"
#include "mux.h"
-#ifndef CONFIG_COMMON_CLK
-#include "clock.h"
-#include "psc.h"
-#endif
-
#define DAVINCI_VPIF_BASE (0x01C12000)
#define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
@@ -52,319 +47,6 @@
#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000
#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000
-#ifndef CONFIG_COMMON_CLK
-static struct pll_data pll1_data = {
- .num = 1,
- .phys_base = DAVINCI_PLL1_BASE,
-};
-
-static struct pll_data pll2_data = {
- .num = 2,
- .phys_base = DAVINCI_PLL2_BASE,
-};
-
-static struct clk ref_clk = {
- .name = "ref_clk",
- /* rate is initialized in dm646x_init_time() */
-};
-
-static struct clk aux_clkin = {
- .name = "aux_clkin",
- /* rate is initialized in dm646x_init_time() */
-};
-
-static struct clk pll1_clk = {
- .name = "pll1",
- .parent = &ref_clk,
- .pll_data = &pll1_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
- .name = "pll1_sysclk1",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
- .name = "pll1_sysclk2",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
- .name = "pll1_sysclk3",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
- .name = "pll1_sysclk6",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk8 = {
- .name = "pll1_sysclk8",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV8,
-};
-
-static struct clk pll1_sysclk9 = {
- .name = "pll1_sysclk9",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV9,
-};
-
-static struct clk pll1_sysclkbp = {
- .name = "pll1_sysclkbp",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
- .div_reg = BPDIV,
-};
-
-static struct clk pll1_aux_clk = {
- .name = "pll1_aux_clk",
- .parent = &pll1_clk,
- .flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll2_clk = {
- .name = "pll2_clk",
- .parent = &ref_clk,
- .pll_data = &pll2_data,
- .flags = CLK_PLL,
-};
-
-static struct clk pll2_sysclk1 = {
- .name = "pll2_sysclk1",
- .parent = &pll2_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV1,
-};
-
-static struct clk dsp_clk = {
- .name = "dsp",
- .parent = &pll1_sysclk1,
- .lpsc = DM646X_LPSC_C64X_CPU,
- .usecount = 1, /* REVISIT how to disable? */
-};
-
-static struct clk arm_clk = {
- .name = "arm",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_ARM,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_cc_clk = {
- .name = "edma_cc",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPCC,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc0_clk = {
- .name = "edma_tc0",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC0,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc1_clk = {
- .name = "edma_tc1",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC1,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc2_clk = {
- .name = "edma_tc2",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC2,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc3_clk = {
- .name = "edma_tc3",
- .parent = &pll1_sysclk2,
- .lpsc = DM646X_LPSC_TPTC3,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk uart0_clk = {
- .name = "uart0",
- .parent = &aux_clkin,
- .lpsc = DM646X_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
- .name = "uart1",
- .parent = &aux_clkin,
- .lpsc = DM646X_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
- .name = "uart2",
- .parent = &aux_clkin,
- .lpsc = DM646X_LPSC_UART2,
-};
-
-static struct clk i2c_clk = {
- .name = "I2CCLK",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_I2C,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_GPIO,
-};
-
-static struct clk mcasp0_clk = {
- .name = "mcasp0",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_McASP0,
-};
-
-static struct clk mcasp1_clk = {
- .name = "mcasp1",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_McASP1,
-};
-
-static struct clk aemif_clk = {
- .name = "aemif",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_AEMIF,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk emac_clk = {
- .name = "emac",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_EMAC,
-};
-
-static struct clk pwm0_clk = {
- .name = "pwm0",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_PWM0,
- .usecount = 1, /* REVIST: disabling hangs system */
-};
-
-static struct clk pwm1_clk = {
- .name = "pwm1",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_PWM1,
- .usecount = 1, /* REVIST: disabling hangs system */
-};
-
-static struct clk timer0_clk = {
- .name = "timer0",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
- .name = "timer1",
- .parent = &pll1_sysclk3,
- .lpsc = DM646X_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
- .name = "timer2",
- .parent = &pll1_sysclk3,
- .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
-};
-
-
-static struct clk ide_clk = {
- .name = "ide",
- .parent = &pll1_sysclk4,
- .lpsc = DAVINCI_LPSC_ATA,
-};
-
-static struct clk vpif0_clk = {
- .name = "vpif0",
- .parent = &ref_clk,
- .lpsc = DM646X_LPSC_VPSSMSTR,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk vpif1_clk = {
- .name = "vpif1",
- .parent = &ref_clk,
- .lpsc = DM646X_LPSC_VPSSSLV,
- .flags = ALWAYS_ENABLED,
-};
-
-static struct clk_lookup dm646x_clks[] = {
- CLK(NULL, "ref", &ref_clk),
- CLK(NULL, "aux", &aux_clkin),
- CLK(NULL, "pll1", &pll1_clk),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
- CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
- CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
- CLK(NULL, "pll1_aux", &pll1_aux_clk),
- CLK(NULL, "pll2", &pll2_clk),
- CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
- CLK(NULL, "dsp", &dsp_clk),
- CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "edma_cc", &edma_cc_clk),
- CLK(NULL, "edma_tc0", &edma_tc0_clk),
- CLK(NULL, "edma_tc1", &edma_tc1_clk),
- CLK(NULL, "edma_tc2", &edma_tc2_clk),
- CLK(NULL, "edma_tc3", &edma_tc3_clk),
- CLK("serial8250.0", NULL, &uart0_clk),
- CLK("serial8250.1", NULL, &uart1_clk),
- CLK("serial8250.2", NULL, &uart2_clk),
- CLK("i2c_davinci.1", NULL, &i2c_clk),
- CLK(NULL, "gpio", &gpio_clk),
- CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
- CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
- CLK(NULL, "aemif", &aemif_clk),
- CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
- CLK(NULL, "pwm0", &pwm0_clk),
- CLK(NULL, "pwm1", &pwm1_clk),
- CLK(NULL, "timer0", &timer0_clk),
- CLK(NULL, "timer1", &timer1_clk),
- CLK("davinci-wdt", NULL, &timer2_clk),
- CLK("palm_bk3710", NULL, &ide_clk),
- CLK(NULL, "vpif0", &vpif0_clk),
- CLK(NULL, "vpif1", &vpif1_clk),
- CLK(NULL, NULL, NULL),
-};
-#endif
-
static struct emac_platform_data dm646x_emac_pdata = {
.ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
@@ -803,8 +485,6 @@ static struct davinci_id dm646x_ids[] = {
},
};
-static u32 dm646x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
/*
* T0_BOT: Timer 0, bottom: clockevent source for hrtimers
* T0_TOP: Timer 0, top : clocksource for generic timekeeping
@@ -889,8 +569,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = {
.jtag_id_reg = 0x01c40028,
.ids = dm646x_ids,
.ids_num = ARRAY_SIZE(dm646x_ids),
- .psc_bases = dm646x_psc_bases,
- .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
.pinmux_pins = dm646x_pins,
.pinmux_pins_num = ARRAY_SIZE(dm646x_pins),
@@ -961,7 +639,6 @@ void __init dm646x_init(void)
void __init dm646x_init_time(unsigned long ref_clk_rate,
unsigned long aux_clkin_rate)
{
-#ifdef CONFIG_COMMON_CLK
void __iomem *pll1, *pll2, *psc;
struct clk *clk;
@@ -979,11 +656,7 @@ void __init dm646x_init_time(unsigned long ref_clk_rate,
/* no LPSC, always enabled; c.f. spruep9a */
clk = clk_register_fixed_factor(NULL, "timer2", "pll1_sysclk3", 0, 1, 1);
clk_register_clkdev(clk, NULL, "davinci-wdt");
-#else
- ref_clk.rate = ref_clk_rate;
- aux_clkin.rate = aux_clkin_rate;
- davinci_clk_init(dm646x_clks);
-#endif
+
davinci_timer_init();
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-01-20 17:14 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-20 17:13 [PATCH v6 00/41] ARM: davinci: convert to common clock framework David Lechner
2018-01-20 17:13 ` [PATCH v6 03/41] clk: davinci: Add platform information for TI DA830 PLL David Lechner
2018-02-01 8:10 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 04/41] clk: davinci: Add platform information for TI DA850 PLL David Lechner
2018-02-01 8:58 ` Sekhar Nori
[not found] ` <834cb7ce-9406-a806-3ec1-a59766bd8a9d-l0cyMroinI0@public.gmane.org>
2018-02-01 19:04 ` David Lechner
[not found] ` <6f0146e4-72bc-7bc2-2135-44950949cd77-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-02 8:23 ` Sekhar Nori
2018-02-01 19:22 ` David Lechner
[not found] ` <7d7e0522-30d5-6232-853e-7ab32fadfe48-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-02 8:37 ` Sekhar Nori
[not found] ` <ceec9849-e3fb-0e9b-4000-aab3ca2f5a43-l0cyMroinI0@public.gmane.org>
2018-02-02 17:45 ` David Lechner
2018-01-20 17:13 ` [PATCH v6 05/41] clk: davinci: Add platform information for TI DM355 PLL David Lechner
[not found] ` <1516468460-4908-6-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-01 9:17 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 06/41] clk: davinci: Add platform information for TI DM365 PLL David Lechner
2018-02-01 9:28 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 07/41] clk: davinci: Add platform information for TI DM644x PLL David Lechner
2018-01-20 17:13 ` [PATCH v6 08/41] clk: davinci: Add platform information for TI DM646x PLL David Lechner
2018-01-20 17:13 ` [PATCH v6 09/41] dt-bindings: clock: New bindings for TI Davinci PSC David Lechner
2018-01-22 15:05 ` Rob Herring
2018-01-20 17:13 ` [PATCH v6 10/41] clk: davinci: New driver for davinci PSC clocks David Lechner
2018-02-01 9:55 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 11/41] clk: davinci: Add platform information for TI DA830 PSC David Lechner
2018-02-01 11:34 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 12/41] clk: davinci: Add platform information for TI DA850 PSC David Lechner
2018-02-01 11:42 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 13/41] clk: davinci: Add platform information for TI DM355 PSC David Lechner
2018-02-01 11:50 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 14/41] clk: davinci: Add platform information for TI DM365 PSC David Lechner
2018-02-01 11:55 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 15/41] clk: davinci: Add platform information for TI DM644x PSC David Lechner
2018-02-01 12:13 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 16/41] clk: davinci: Add platform information for TI DM646x PSC David Lechner
2018-02-01 12:17 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 17/41] dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks David Lechner
2018-01-29 19:59 ` Rob Herring
2018-02-02 6:20 ` Sekhar Nori
2018-02-02 17:50 ` David Lechner
2018-02-05 9:42 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 18/41] clk: davinci: New driver for TI " David Lechner
[not found] ` <1516468460-4908-19-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-02 13:19 ` Sekhar Nori
[not found] ` <c2138795-edcd-bb7d-094d-47dc049c33df-l0cyMroinI0@public.gmane.org>
2018-02-02 13:53 ` Sekhar Nori
2018-02-02 17:56 ` David Lechner
2018-01-20 17:13 ` [PATCH v6 20/41] ARM: da830: add new clock init using common clock framework David Lechner
[not found] ` <1516468460-4908-21-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-22 17:15 ` David Lechner
2018-02-02 14:12 ` Sekhar Nori
2018-02-02 18:03 ` David Lechner
2018-02-05 11:06 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 23/41] ARM: dm365: " David Lechner
2018-02-02 14:37 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 25/41] ARM: dm646x: " David Lechner
2018-02-02 14:55 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 26/41] ARM: da8xx: add new USB PHY " David Lechner
[not found] ` <1516468460-4908-27-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-22 17:17 ` David Lechner
2018-01-20 17:14 ` [PATCH v6 27/41] ARM: da8xx: add new sata_refclk " David Lechner
2018-02-02 14:59 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 29/41] ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-02-02 15:04 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 30/41] ARM: davinci: switch to common clock framework David Lechner
2018-02-07 13:20 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 31/41] ARM: da830: Remove legacy clock init David Lechner
2018-02-07 13:28 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 33/41] ARM: dm355: " David Lechner
2018-02-07 13:42 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 34/41] ARM: dm365: " David Lechner
2018-02-07 13:44 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 35/41] ARM: dm644x: " David Lechner
[not found] ` <1516468460-4908-36-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-07 13:46 ` Sekhar Nori
[not found] ` <1516468460-4908-1-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-20 17:13 ` [PATCH v6 01/41] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks David Lechner
2018-01-29 19:53 ` Rob Herring
2018-01-29 21:14 ` David Lechner
2018-01-30 14:50 ` Rob Herring
2018-01-30 18:46 ` David Lechner
2018-01-31 4:58 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 02/41] clk: davinci: New driver for davinci " David Lechner
[not found] ` <1516468460-4908-3-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-01 8:01 ` Sekhar Nori
2018-02-01 12:22 ` Sekhar Nori
2018-02-01 18:57 ` David Lechner
[not found] ` <3ed91881-8753-a541-31aa-c835329141b3-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-02 8:12 ` Sekhar Nori
2018-01-20 17:13 ` [PATCH v6 19/41] clk: davinci: New driver for TI DA8XX USB PHY clocks David Lechner
2018-02-02 13:59 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 21/41] ARM: da850: add new clock init using common clock framework David Lechner
2018-02-02 14:20 ` Sekhar Nori
2018-02-02 18:05 ` David Lechner
2018-01-20 17:14 ` [PATCH v6 22/41] ARM: dm355: " David Lechner
2018-02-02 14:36 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 24/41] ARM: dm644x: " David Lechner
2018-02-02 14:39 ` Sekhar Nori
2018-02-02 18:06 ` David Lechner
[not found] ` <d8325090-e369-5a1a-b34a-8174123b01ff-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-05 6:01 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 28/41] ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-02-02 15:03 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 32/41] ARM: da850: Remove legacy clock init David Lechner
2018-02-07 13:35 ` Sekhar Nori
2018-01-20 17:14 ` David Lechner [this message]
2018-02-07 15:06 ` [PATCH v6 36/41] ARM: dm646x: " Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 38/41] ARM: davinci: remove legacy clocks David Lechner
[not found] ` <1516468460-4908-39-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-07 15:24 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 39/41] ARM: davinci: add device tree support to timer David Lechner
2018-01-20 17:14 ` [PATCH v6 37/41] ARM: da8xx: Remove legacy clock init David Lechner
2018-02-07 15:16 ` Sekhar Nori
2018-01-20 17:14 ` [PATCH v6 40/41] ARM: da8xx-dt: switch to device tree clocks David Lechner
2018-01-24 3:26 ` David Lechner
[not found] ` <335d92c8-1af2-da64-e366-95d7513ad69d-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-02-05 14:04 ` Bartosz Golaszewski
2018-02-05 15:33 ` Bartosz Golaszewski
2018-01-20 17:14 ` [PATCH v6 41/41] ARM: dts: da850: Add clocks David Lechner
2018-01-22 17:14 ` David Lechner
[not found] ` <1516468460-4908-42-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-24 4:08 ` David Lechner
2018-02-09 12:46 ` Sekhar Nori
2018-01-21 21:19 ` [PATCH v6 00/41] ARM: davinci: convert to common clock framework Adam Ford
2018-01-22 11:14 ` Bartosz Golaszewski
[not found] ` <CAMRc=MexJTMiD=URw1bv-qfGaTntZRXgfsSb_beYGkvO+LrpgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-22 17:30 ` David Lechner
[not found] ` <d819e18f-7d74-d8c4-8056-bfc545f4d4e9-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-23 14:54 ` Bartosz Golaszewski
2018-01-23 16:03 ` David Lechner
2018-01-23 16:06 ` David Lechner
2018-01-23 17:03 ` Adam Ford
2018-01-23 18:10 ` Bartosz Golaszewski
2018-01-23 18:26 ` David Lechner
2018-01-23 18:34 ` Bartosz Golaszewski
2018-01-23 19:24 ` David Lechner
2018-01-23 19:53 ` Bartosz Golaszewski
[not found] ` <CAMRc=Me8HefZJYTkprqL2vpq_nLym4r6p-du7hoKwVk8kSCR8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-23 20:01 ` David Lechner
2018-01-23 20:05 ` David Lechner
[not found] ` <f28601f6-d6f1-9a55-f3cf-62543412bd36-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-23 20:23 ` David Lechner
[not found] ` <fc54ab26-72be-1377-2ccb-72d34360c5eb-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2018-01-24 8:03 ` Bartosz Golaszewski
2018-01-25 12:53 ` Sekhar Nori
2018-01-25 13:34 ` Bartosz Golaszewski
2018-01-25 16:18 ` David Lechner
2018-01-25 17:05 ` Sekhar Nori
2018-01-23 17:04 ` Bartosz Golaszewski
2018-01-22 13:29 ` Bartosz Golaszewski
2018-01-22 17:11 ` David Lechner
2018-01-23 14:56 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516468460-4908-37-git-send-email-david@lechnology.com \
--to=david-nq/r/kbu++upp/zk7jdf2g@public.gmane.org \
--cc=aford173-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).