From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hyun Kwon Subject: [PATCH v4 2/5] dt-bindings: display: xlnx: Add ZynqMP DP subsystem bindings Date: Thu, 25 Jan 2018 17:33:59 -0800 Message-ID: <1516930442-10285-2-git-send-email-hyun.kwon@xilinx.com> References: <1516930442-10285-1-git-send-email-hyun.kwon@xilinx.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1516930442-10285-1-git-send-email-hyun.kwon-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Michal Simek , Rob Herring , Daniel Vetter , Laurent Pinchart , Hyun Kwon List-Id: devicetree@vger.kernel.org This add a dt binding for ZynqMP DP subsystem. Signed-off-by: Hyun Kwon --- v4 - Specify phy related descriptions - Specify dma related descriptions - Remove ports - Remove child nodes for layers - Update the example accordingly v2 - Group multiple ports under 'ports' - Replace linux specific terms with generic hardware descriptions --- --- .../bindings/display/xlnx/xlnx,zynqmp-dpsub.txt | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt new file mode 100644 index 0000000..f4a2e6d --- /dev/null +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt @@ -0,0 +1,67 @@ +Xilinx ZynqMP DisplayPort subsystem +----------------------------------- + +Required properties: + +- compatible: Must be "xlnx,zynqmp-dpsub-1.7". + +- reg: Physical base address and length of the registers set for the device. +- reg-names: Must be "dp", "blend", "av_buf", and "aud" to map logical register + partitions. + +- interrupts: Interrupt number. +- interrupts-parent: phandle for interrupt controller. + +- clocks: phandles for axi, audio, non-live video, and live video clocks. + axi clock is required. Audio clock is optional. If not present, audio will + be disabled. One of non-live or live video clock should be present. +- clock-names: The identification strings are required. "aclk" for axi clock. + "dp_aud_clk" for audio clock. "dp_vtc_pixel_clk_in" for non-live video clock. + "dp_live_video_in_clk" for live video clock (clock from programmable logic). + +- phys: phandles for phy specifier. The number of lanes is configurable + between 1 and 2. The number of phandles should be 1 or 2. +- phy-names: The identifier strings. "dp-phy" followed by index, 0 or 1. + For single lane, only "dp-phy0" is required. For dual lane, both "dp-phy0" + and "dp-phy1" are required where "dp-phy0" is the primary lane. + +- power-domains: phandle for the corresponding power domain + +- dmas: phandles for DMA channels as defined in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names: The identifier strings are required. "gfx0" for graphics layer + dma channel. "vid" followed by index (0 - 2) for video layer dma channels. + +Optional child node + +- The driver populates any child device node in this node. This can be used, + for example, to populate the sound device from the DisplayPort subsystem + driver. + +Example: + zynqmp-display-subsystem@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + reg = <0x0 0xfd4a0000 0x0 0x1000>, + <0x0 0xfd4aa000 0x0 0x1000>, + <0x0 0xfd4ab000 0x0 0x1000>, + <0x0 0xfd4ac000 0x0 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + + clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk"; + clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>; + + phys = <&lane1>, <&lane0>; + phy-names = "dp-phy0", "dp-phy1"; + + power-domains = <&pd_dp>; + + dma-names = "vid0", "vid1", "vid2", "gfx0"; + dmas = <&xlnx_dpdma 0>, + <&xlnx_dpdma 1>, + <&xlnx_dpdma 2>, + <&xlnx_dpdma 3>; + }; +}; + -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html