devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: laurent.pinchart@ideasonboard.com, magnus.damm@gmail.com,
	geert@glider.be, hverkuil@xs4all.nl, mchehab@kernel.org,
	festevam@gmail.com, sakari.ailus@iki.fi, robh+dt@kernel.org,
	mark.rutland@arm.com, pombredanne@nexb.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
	linux-sh@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v7 06/11] media: i2c: ov772x: Remove soc_camera dependencies
Date: Fri, 26 Jan 2018 14:48:40 +0100	[thread overview]
Message-ID: <1516974528-11120-9-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1516974528-11120-1-git-send-email-jacopo+renesas@jmondi.org>

Remove soc_camera framework dependencies from ov772x sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Change image format colorspace from JPEG to SRGB as the two use the
  same colorspace information but JPEG makes assumptions on color
  components quantization that do not apply to the sensor
- Remove sizes crop from get_selection as driver can't scale
- Add kernel doc to driver interface header file
- Adjust build system

This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/Kconfig  |  11 +++
 drivers/media/i2c/Makefile |   1 +
 drivers/media/i2c/ov772x.c | 169 ++++++++++++++++++++++++++++++---------------
 include/media/i2c/ov772x.h |   6 +-
 4 files changed, 130 insertions(+), 57 deletions(-)

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 9f18cd2..e71e968 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -645,6 +645,17 @@ config VIDEO_OV5670
 	  To compile this driver as a module, choose M here: the
 	  module will be called ov5670.
 
+config VIDEO_OV772X
+	tristate "OmniVision OV772x sensor support"
+	depends on I2C && VIDEO_V4L2
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the OmniVision
+	  OV772x camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov772x.
+
 config VIDEO_OV7640
 	tristate "OmniVision OV7640 sensor support"
 	depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index c0f94cd..b0489a1 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
 obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
 obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
 obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
+obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
 obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
 obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
 obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 8063835..912b1b9 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -1,6 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ov772x Camera Driver
  *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
  * Copyright (C) 2008 Renesas Solutions Corp.
  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
  *
@@ -9,27 +12,25 @@
  * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
  * Copyright (C) 2008 Magnus Damm
  * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/i2c.h>
 #include <linux/slab.h>
-#include <linux/delay.h>
 #include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
 
 #include <media/i2c/ov772x.h>
-#include <media/soc_camera.h>
-#include <media/v4l2-clk.h>
+
 #include <media/v4l2-ctrls.h>
-#include <media/v4l2-subdev.h>
+#include <media/v4l2-device.h>
 #include <media/v4l2-image-sizes.h>
+#include <media/v4l2-subdev.h>
 
 /*
  * register offset
@@ -393,8 +394,10 @@ struct ov772x_win_size {
 struct ov772x_priv {
 	struct v4l2_subdev                subdev;
 	struct v4l2_ctrl_handler	  hdl;
-	struct v4l2_clk			 *clk;
+	struct clk			 *clk;
 	struct ov772x_camera_info        *info;
+	struct gpio_desc		 *pwdn_gpio;
+	struct gpio_desc		 *rstb_gpio;
 	const struct ov772x_color_format *cfmt;
 	const struct ov772x_win_size     *win;
 	unsigned short                    flag_vflip:1;
@@ -409,7 +412,7 @@ struct ov772x_priv {
 static const struct ov772x_color_format ov772x_cfmts[] = {
 	{
 		.code		= MEDIA_BUS_FMT_YUYV8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.dsp3		= 0x0,
 		.dsp4		= DSP_OFMT_YUV,
 		.com3		= SWAP_YUV,
@@ -417,7 +420,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
 	},
 	{
 		.code		= MEDIA_BUS_FMT_YVYU8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.dsp3		= UV_ON,
 		.dsp4		= DSP_OFMT_YUV,
 		.com3		= SWAP_YUV,
@@ -425,7 +428,7 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
 	},
 	{
 		.code		= MEDIA_BUS_FMT_UYVY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
+		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.dsp3		= 0x0,
 		.dsp4		= DSP_OFMT_YUV,
 		.com3		= 0x0,
@@ -550,7 +553,7 @@ static int ov772x_reset(struct i2c_client *client)
 }
 
 /*
- * soc_camera_ops function
+ * subdev ops
  */
 
 static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
@@ -650,13 +653,65 @@ static int ov772x_s_register(struct v4l2_subdev *sd,
 }
 #endif
 
+static int ov772x_power_on(struct ov772x_priv *priv)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+	int ret;
+
+	if (priv->clk) {
+		ret = clk_prepare_enable(priv->clk);
+		if (ret)
+			return ret;
+	}
+
+	if (priv->pwdn_gpio) {
+		gpiod_set_value(priv->pwdn_gpio, 1);
+		usleep_range(500, 1000);
+	}
+
+	/*
+	 * FIXME: The reset signal is connected to a shared GPIO on some
+	 * platforms (namely the SuperH Migo-R). Until a framework becomes
+	 * available to handle this cleanly, request the GPIO temporarily
+	 * to avoid conflicts.
+	 */
+	priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(priv->rstb_gpio)) {
+		dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
+		return PTR_ERR(priv->rstb_gpio);
+	}
+
+	if (priv->rstb_gpio) {
+		gpiod_set_value(priv->rstb_gpio, 1);
+		usleep_range(500, 1000);
+		gpiod_set_value(priv->rstb_gpio, 0);
+		usleep_range(500, 1000);
+
+		gpiod_put(priv->rstb_gpio);
+	}
+
+	return 0;
+}
+
+static int ov772x_power_off(struct ov772x_priv *priv)
+{
+	clk_disable_unprepare(priv->clk);
+
+	if (priv->pwdn_gpio) {
+		gpiod_set_value(priv->pwdn_gpio, 0);
+		usleep_range(500, 1000);
+	}
+
+	return 0;
+}
+
 static int ov772x_s_power(struct v4l2_subdev *sd, int on)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
 	struct ov772x_priv *priv = to_ov772x(sd);
 
-	return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+	return on ? ov772x_power_on(priv) :
+		    ov772x_power_off(priv);
 }
 
 static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
@@ -855,6 +910,8 @@ static int ov772x_get_selection(struct v4l2_subdev *sd,
 		struct v4l2_subdev_pad_config *cfg,
 		struct v4l2_subdev_selection *sel)
 {
+	struct ov772x_priv *priv = to_ov772x(sd);
+
 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
 		return -EINVAL;
 
@@ -863,12 +920,9 @@ static int ov772x_get_selection(struct v4l2_subdev *sd,
 	switch (sel->target) {
 	case V4L2_SEL_TGT_CROP_BOUNDS:
 	case V4L2_SEL_TGT_CROP_DEFAULT:
-		sel->r.width = OV772X_MAX_WIDTH;
-		sel->r.height = OV772X_MAX_HEIGHT;
-		return 0;
 	case V4L2_SEL_TGT_CROP:
-		sel->r.width = VGA_WIDTH;
-		sel->r.height = VGA_HEIGHT;
+		sel->r.width = priv->win->rect.width;
+		sel->r.height = priv->win->rect.height;
 		return 0;
 	default:
 		return -EINVAL;
@@ -997,24 +1051,8 @@ static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
-				struct v4l2_mbus_config *cfg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
-	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
-		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
-		V4L2_MBUS_DATA_ACTIVE_HIGH;
-	cfg->type = V4L2_MBUS_PARALLEL;
-	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
-	return 0;
-}
-
 static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
 	.s_stream	= ov772x_s_stream,
-	.g_mbus_config	= ov772x_g_mbus_config,
 };
 
 static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
@@ -1038,12 +1076,11 @@ static int ov772x_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 {
 	struct ov772x_priv	*priv;
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
+	struct i2c_adapter	*adapter = client->adapter;
 	int			ret;
 
-	if (!ssdd || !ssdd->drv_priv) {
-		dev_err(&client->dev, "OV772X: missing platform data!\n");
+	if (!client->dev.platform_data) {
+		dev_err(&client->dev, "Missing ov772x platform data\n");
 		return -EINVAL;
 	}
 
@@ -1059,7 +1096,7 @@ static int ov772x_probe(struct i2c_client *client,
 	if (!priv)
 		return -ENOMEM;
 
-	priv->info = ssdd->drv_priv;
+	priv->info = client->dev.platform_data;
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
 	v4l2_ctrl_handler_init(&priv->hdl, 3);
@@ -1073,22 +1110,42 @@ static int ov772x_probe(struct i2c_client *client,
 	if (priv->hdl.error)
 		return priv->hdl.error;
 
-	priv->clk = v4l2_clk_get(&client->dev, "mclk");
+	priv->clk = clk_get(&client->dev, "xclk");
 	if (IS_ERR(priv->clk)) {
+		dev_err(&client->dev, "Unable to get xclk clock\n");
 		ret = PTR_ERR(priv->clk);
-		goto eclkget;
+		goto error_ctrl_free;
 	}
 
-	ret = ov772x_video_probe(priv);
-	if (ret < 0) {
-		v4l2_clk_put(priv->clk);
-eclkget:
-		v4l2_ctrl_handler_free(&priv->hdl);
-	} else {
-		priv->cfmt = &ov772x_cfmts[0];
-		priv->win = &ov772x_win_sizes[0];
+	priv->pwdn_gpio = gpiod_get_optional(&client->dev, "pwdn",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(priv->pwdn_gpio)) {
+		dev_info(&client->dev, "Unable to get GPIO \"pwdn\"");
+		ret = PTR_ERR(priv->pwdn_gpio);
+		goto error_clk_put;
 	}
 
+	ret = ov772x_video_probe(priv);
+	if (ret < 0)
+		goto error_gpio_put;
+
+	priv->cfmt = &ov772x_cfmts[0];
+	priv->win = &ov772x_win_sizes[0];
+
+	ret = v4l2_async_register_subdev(&priv->subdev);
+	if (ret)
+		goto error_gpio_put;
+
+	return 0;
+
+error_gpio_put:
+	if (priv->pwdn_gpio)
+		gpiod_put(priv->pwdn_gpio);
+error_clk_put:
+	clk_put(priv->clk);
+error_ctrl_free:
+	v4l2_ctrl_handler_free(&priv->hdl);
+
 	return ret;
 }
 
@@ -1096,7 +1153,9 @@ static int ov772x_remove(struct i2c_client *client)
 {
 	struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
 
-	v4l2_clk_put(priv->clk);
+	clk_put(priv->clk);
+	if (priv->pwdn_gpio)
+		gpiod_put(priv->pwdn_gpio);
 	v4l2_device_unregister_subdev(&priv->subdev);
 	v4l2_ctrl_handler_free(&priv->hdl);
 	return 0;
@@ -1119,6 +1178,6 @@ static struct i2c_driver ov772x_i2c_driver = {
 
 module_i2c_driver(ov772x_i2c_driver);
 
-MODULE_DESCRIPTION("SoC Camera driver for ov772x");
+MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor");
 MODULE_AUTHOR("Kuninori Morimoto");
 MODULE_LICENSE("GPL v2");
diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
index 00dbb7c..27d087b 100644
--- a/include/media/i2c/ov772x.h
+++ b/include/media/i2c/ov772x.h
@@ -48,8 +48,10 @@ struct ov772x_edge_ctrl {
 	.threshold = (t & OV772X_EDGE_THRESHOLD_MASK),	\
 }
 
-/*
- * ov772x camera info
+/**
+ * ov772x_camera_info -	ov772x driver interface structure
+ * @flags:		Sensor configuration flags
+ * @edgectrl:		Sensor edge control
  */
 struct ov772x_camera_info {
 	unsigned long		flags;
-- 
2.7.4

  parent reply	other threads:[~2018-01-26 13:48 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-26 13:48 [PATCH v7 00/11] Renesas Capture Engine Unit (CEU) V4L2 driver Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 01/11] dt-bindings: media: Add Renesas CEU bindings Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 02/11] include: media: Add Renesas CEU driver interface Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 03/11] media: platform: Add Renesas CEU driver Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 3/9] v4l: " Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 04/11] ARM: dts: r7s72100: Add Capture Engine Unit (CEU) Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 05/11] media: i2c: Copy ov772x soc_camera sensor driver Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 5/9] v4l: " Jacopo Mondi
2018-01-26 13:48 ` Jacopo Mondi [this message]
2018-01-26 13:48 ` [PATCH v7 07/11] media: i2c: ov772x: Support frame interval handling Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 7/9] v4l: i2c: Copy tw9910 soc_camera sensor driver Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 08/11] media: " Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 8/9] media: i2c: tw9910: Remove soc_camera dependencies Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 9/9] arch: sh: migor: Use new renesas-ceu camera driver Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 09/11] media: i2c: tw9910: Remove soc_camera dependencies Jacopo Mondi
2018-01-26 13:48 ` [PATCH v7 10/11] arch: sh: migor: Use new renesas-ceu camera driver Jacopo Mondi
2018-01-26 13:54 ` [PATCH v7 00/11] Renesas Capture Engine Unit (CEU) V4L2 driver jacopo mondi
2018-01-26 13:56   ` Geert Uytterhoeven
2018-01-26 13:55 Jacopo Mondi
2018-01-26 13:55 ` [PATCH v7 06/11] media: i2c: ov772x: Remove soc_camera dependencies Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1516974528-11120-9-git-send-email-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=geert@glider.be \
    --cc=hverkuil@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=pombredanne@nexb.com \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).