From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dinh Nguyen Subject: [PATCHv3 2/3] arm64: dts: stratix10: use clock bindings for the Stratix10 platform Date: Mon, 5 Feb 2018 10:22:46 -0600 Message-ID: <1517847767-16053-2-git-send-email-dinguyen@kernel.org> References: <1517847767-16053-1-git-send-email-dinguyen@kernel.org> Return-path: In-Reply-To: <1517847767-16053-1-git-send-email-dinguyen@kernel.org> Sender: linux-clk-owner@vger.kernel.org To: linux-clk@vger.kernel.org Cc: dinguyen@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, robh+dt@kernel.org, mark.rutland@arm.com, mturquette@baylibre.com, sboyd@codeaurora.org List-Id: devicetree@vger.kernel.org Use the clock bindings for the Stratix10 SoC. This includes changing the old binding of "intc,clk-s10-mgr" to "intel,stratix10-clkmgr". The reason that this can be done is that there are currently no clock driver for Stratix10, thus there are no consumers of the old binding. So changing the binding will not break any legacy code. Signed-off-by: Dinh Nguyen --- v3: - use the correct vendor prefix - explain the binding change v2: - use a single clock binding for the clock controller --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 50 +++++++++++++++++++++- .../boot/dts/altera/socfpga_stratix10_socdk.dts | 10 +++++ 2 files changed, 58 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index c89d0c30..b472352 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -17,6 +17,7 @@ /dts-v1/; #include #include +#include / { compatible = "altr,socfpga-stratix10"; @@ -92,9 +93,35 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; - clkmgr@ffd1000 { - compatible = "altr,clk-mgr"; + clkmgr: clock-controller@ffd10000 { + compatible = "intel,stratix10-clkmgr"; reg = <0xffd10000 0x1000>; + #clock-cells = <1>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb_intosc_ls_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s_free_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + }; }; gmac0: ethernet@ff800000 { @@ -105,6 +132,8 @@ mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + clocks = <&clkmgr STRATIX10_EMAC0_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -116,6 +145,8 @@ mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + clocks = <&clkmgr STRATIX10_EMAC1_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -127,6 +158,8 @@ mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC2_RESET>; reset-names = "stmmaceth"; + clocks = <&clkmgr STRATIX10_EMAC2_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -229,6 +262,9 @@ fifo-depth = <0x400>; resets = <&rst SDMMC_RESET>; reset-names = "reset"; + clocks = <&clkmgr STRATIX10_L4_MP_CLK>, + <&clkmgr STRATIX10_SDMMC_CLK>; + clock-names = "biu", "ciu"; status = "disabled"; }; @@ -288,24 +324,32 @@ compatible = "snps,dw-apb-timer"; interrupts = <0 113 4>; reg = <0xffc03000 0x100>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; + clock-names = "timer"; }; timer1: timer1@ffc03100 { compatible = "snps,dw-apb-timer"; interrupts = <0 114 4>; reg = <0xffc03100 0x100>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 115 4>; reg = <0xffd00000 0x100>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; + clock-names = "timer"; }; timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 116 4>; reg = <0xffd00100 0x100>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -315,6 +359,7 @@ reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART0_RESET>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; status = "disabled"; }; @@ -325,6 +370,7 @@ reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART1_RESET>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 0007564..4d2d471 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -50,6 +50,16 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; + + soc { + clkmgr@ffd10000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + }; }; &gpio1 { -- 2.7.4