From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maciej Purski Subject: [PATCH v2] ARM: dts: exynos: Add soc node to exynos5440 Date: Tue, 06 Feb 2018 12:31:50 +0100 Message-ID: <1517916710-13970-1-git-send-email-m.purski@samsung.com> References: Return-path: Sender: linux-samsung-soc-owner@vger.kernel.org To: Krzysztof Kozlowski Cc: Kukjin Kim , devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, m.szyprowski@samsung.com, b.zolnierkie@samsung.com, Maciej Purski List-Id: devicetree@vger.kernel.org The exynos5440 device tree is the only one left, which does not use "soc" node. Add a "soc" node to exynos5440.dtsi in order to make it compatible with other exynos DTS. Signed-off-by: Maciej Purski --- Changes in v2: - move the "thermal-zones" node outside the "soc" node --- arch/arm/boot/dts/exynos5440.dtsi | 514 +++++++++++++++++++------------------- 1 file changed, 261 insertions(+), 253 deletions(-) diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index fce9e26..f3abecc4 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -26,24 +26,6 @@ tmuctrl2 = &tmuctrl_2; }; - clock: clock-controller@160000 { - compatible = "samsung,exynos5440-clock"; - reg = <0x160000 0x1000>; - #clock-cells = <1>; - }; - - gic: interrupt-controller@2e0000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x2E1000 0x1000>, - <0x2E2000 0x2000>, - <0x2E4000 0x2000>, - <0x2E6000 0x2000>; - interrupts = ; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -70,182 +52,290 @@ }; }; - arm-pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; - interrupts = , - , - , - ; - }; + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = , - , - , - ; - clock-frequency = <50000000>; - }; + clock: clock-controller@160000 { + compatible = "samsung,exynos5440-clock"; + reg = <0x160000 0x1000>; + #clock-cells = <1>; + }; - cpufreq@160000 { - compatible = "samsung,exynos5440-cpufreq"; - reg = <0x160000 0x1000>; - interrupts = ; - operating-points = < - /* KHz uV */ - 1500000 1100000 - 1400000 1075000 - 1300000 1050000 - 1200000 1025000 - 1100000 1000000 - 1000000 975000 - 900000 950000 - 800000 925000 - >; - }; + gic: interrupt-controller@2e0000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2E1000 0x1000>, + <0x2E2000 0x2000>, + <0x2E4000 0x2000>, + <0x2E6000 0x2000>; + interrupts = ; + }; - serial_0: serial@b0000 { - compatible = "samsung,exynos4210-uart"; - reg = <0xB0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; - clock-names = "uart", "clk_uart_baud0"; - }; - serial_1: serial@c0000 { - compatible = "samsung,exynos4210-uart"; - reg = <0xC0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; - clock-names = "uart", "clk_uart_baud0"; - }; + arm-pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = , + , + , + ; + }; - spi_0: spi@d0000 { - compatible = "samsung,exynos5440-spi"; - reg = <0xD0000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - samsung,spi-src-clk = <0>; - num-cs = <1>; - clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>; - clock-names = "spi", "spi_busclk0"; - }; + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <50000000>; + }; - pin_ctrl: pinctrl@e0000 { - compatible = "samsung,exynos5440-pinctrl"; - reg = <0xE0000 0x1000>; - interrupts = , - , - , - , - , - , - , - ; - interrupt-controller; - #interrupt-cells = <2>; - #gpio-cells = <2>; + cpufreq@160000 { + compatible = "samsung,exynos5440-cpufreq"; + reg = <0x160000 0x1000>; + interrupts = ; + operating-points = < + /* KHz uV */ + 1500000 1100000 + 1400000 1075000 + 1300000 1050000 + 1200000 1025000 + 1100000 1000000 + 1000000 975000 + 900000 950000 + 800000 925000 + >; + }; - fan: fan { - samsung,exynos5440-pin-function = <1>; + serial_0: serial@b0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xB0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; + clock-names = "uart", "clk_uart_baud0"; }; - hdd_led0: hdd_led0 { - samsung,exynos5440-pin-function = <2>; + serial_1: serial@c0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xC0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; + clock-names = "uart", "clk_uart_baud0"; }; - hdd_led1: hdd_led1 { - samsung,exynos5440-pin-function = <3>; + spi_0: spi@d0000 { + compatible = "samsung,exynos5440-spi"; + reg = <0xD0000 0x100>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; + clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>; + clock-names = "spi", "spi_busclk0"; }; - uart1: uart1 { - samsung,exynos5440-pin-function = <4>; + pin_ctrl: pinctrl@e0000 { + compatible = "samsung,exynos5440-pinctrl"; + reg = <0xE0000 0x1000>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + + fan: fan { + samsung,exynos5440-pin-function = <1>; + }; + + hdd_led0: hdd_led0 { + samsung,exynos5440-pin-function = <2>; + }; + + hdd_led1: hdd_led1 { + samsung,exynos5440-pin-function = <3>; + }; + + uart1: uart1 { + samsung,exynos5440-pin-function = <4>; + }; }; - }; - i2c@f0000 { - compatible = "samsung,exynos5440-i2c"; - reg = <0xF0000 0x1000>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_B_125>; - clock-names = "i2c"; - }; + i2c@f0000 { + compatible = "samsung,exynos5440-i2c"; + reg = <0xF0000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_B_125>; + clock-names = "i2c"; + }; - i2c@100000 { - compatible = "samsung,exynos5440-i2c"; - reg = <0x100000 0x1000>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_B_125>; - clock-names = "i2c"; - }; + i2c@100000 { + compatible = "samsung,exynos5440-i2c"; + reg = <0x100000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_B_125>; + clock-names = "i2c"; + }; - watchdog@110000 { - compatible = "samsung,s3c6410-wdt"; - reg = <0x110000 0x1000>; - interrupts = ; - clocks = <&clock CLK_B_125>; - clock-names = "watchdog"; - }; + watchdog@110000 { + compatible = "samsung,s3c6410-wdt"; + reg = <0x110000 0x1000>; + interrupts = ; + clocks = <&clock CLK_B_125>; + clock-names = "watchdog"; + }; - gmac: ethernet@230000 { - compatible = "snps,dwmac-3.70a", "snps,dwmac"; - reg = <0x00230000 0x8000>; - interrupt-parent = <&gic>; - interrupts = ; - interrupt-names = "macirq"; - phy-mode = "sgmii"; - clocks = <&clock CLK_GMAC0>; - clock-names = "stmmaceth"; - }; + gmac: ethernet@230000 { + compatible = "snps,dwmac-3.70a", "snps,dwmac"; + reg = <0x00230000 0x8000>; + interrupt-parent = <&gic>; + interrupts = ; + interrupt-names = "macirq"; + phy-mode = "sgmii"; + clocks = <&clock CLK_GMAC0>; + clock-names = "stmmaceth"; + }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + }; - rtc@130000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x130000 0x1000>; - interrupts = , - ; - clocks = <&clock CLK_B_125>; - clock-names = "rtc"; - }; + rtc@130000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x130000 0x1000>; + interrupts = , + ; + clocks = <&clock CLK_B_125>; + clock-names = "rtc"; + }; - tmuctrl_0: tmuctrl@160118 { - compatible = "samsung,exynos5440-tmu"; - reg = <0x160118 0x230>, <0x160368 0x10>; - interrupts = ; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" - }; + tmuctrl_0: tmuctrl@160118 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160118 0x230>, <0x160368 0x10>; + interrupts = ; + clocks = <&clock CLK_B_125>; + clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; - tmuctrl_1: tmuctrl@16011c { - compatible = "samsung,exynos5440-tmu"; - reg = <0x16011C 0x230>, <0x160368 0x10>; - interrupts = ; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" - }; + tmuctrl_1: tmuctrl@16011c { + compatible = "samsung,exynos5440-tmu"; + reg = <0x16011C 0x230>, <0x160368 0x10>; + interrupts = ; + clocks = <&clock CLK_B_125>; + clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; + + tmuctrl_2: tmuctrl@160120 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160120 0x230>, <0x160368 0x10>; + interrupts = ; + clocks = <&clock CLK_B_125>; + clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; - tmuctrl_2: tmuctrl@160120 { - compatible = "samsung,exynos5440-tmu"; - reg = <0x160120 0x230>, <0x160368 0x10>; - interrupts = ; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" + sata@210000 { + compatible = "snps,exynos5440-ahci"; + reg = <0x210000 0x10000>; + interrupts = ; + clocks = <&clock CLK_SATA>; + clock-names = "sata"; + }; + + ohci@220000 { + compatible = "samsung,exynos5440-ohci"; + reg = <0x220000 0x1000>; + interrupts = ; + clocks = <&clock CLK_USB>; + clock-names = "usbhost"; + }; + + ehci@221000 { + compatible = "samsung,exynos5440-ehci"; + reg = <0x221000 0x1000>; + interrupts = ; + clocks = <&clock CLK_USB>; + clock-names = "usbhost"; + }; + + pcie_phy0: pcie-phy@270000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x270000 0x1000>, <0x271000 0x40>; + }; + + pcie_phy1: pcie-phy@272000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x272000 0x1000>, <0x271040 0x40>; + }; + + pcie_0: pcie@290000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x290000 0x1000>, <0x40000000 0x1000>; + reg-names = "elbi", "config"; + interrupts = , + , + ; + clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy0>; + ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 53>; + num-lanes = <4>; + status = "disabled"; + }; + + pcie_1: pcie@2a0000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x2a0000 0x1000>, <0x60000000 0x1000>; + reg-names = "elbi", "config"; + interrupts = , + , + ; + clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy1>; + ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 56>; + num-lanes = <4>; + status = "disabled"; + }; }; thermal-zones { @@ -262,86 +352,4 @@ #include "exynos5440-trip-points.dtsi" }; }; - - sata@210000 { - compatible = "snps,exynos5440-ahci"; - reg = <0x210000 0x10000>; - interrupts = ; - clocks = <&clock CLK_SATA>; - clock-names = "sata"; - }; - - ohci@220000 { - compatible = "samsung,exynos5440-ohci"; - reg = <0x220000 0x1000>; - interrupts = ; - clocks = <&clock CLK_USB>; - clock-names = "usbhost"; - }; - - ehci@221000 { - compatible = "samsung,exynos5440-ehci"; - reg = <0x221000 0x1000>; - interrupts = ; - clocks = <&clock CLK_USB>; - clock-names = "usbhost"; - }; - - pcie_phy0: pcie-phy@270000 { - #phy-cells = <0>; - compatible = "samsung,exynos5440-pcie-phy"; - reg = <0x270000 0x1000>, <0x271000 0x40>; - }; - - pcie_phy1: pcie-phy@272000 { - #phy-cells = <0>; - compatible = "samsung,exynos5440-pcie-phy"; - reg = <0x272000 0x1000>, <0x271040 0x40>; - }; - - pcie_0: pcie@290000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x290000 0x1000>, <0x40000000 0x1000>; - reg-names = "elbi", "config"; - interrupts = , - , - ; - clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - phys = <&pcie_phy0>; - ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 53>; - num-lanes = <4>; - status = "disabled"; - }; - - pcie_1: pcie@2a0000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x2a0000 0x1000>, <0x60000000 0x1000>; - reg-names = "elbi", "config"; - interrupts = , - , - ; - clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - phys = <&pcie_phy1>; - ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 56>; - num-lanes = <4>; - status = "disabled"; - }; }; -- 2.7.4