From: Anson Huang <Anson.Huang@nxp.com>
To: shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
mturquette@baylibre.com, sboyd@kernel.org, stefan@agner.ch,
adriana.reus@nxp.com, rui.silva@linaro.org
Cc: Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org
Subject: [PATCH 1/2] clk: imx7d: correct enet clock CCGR register offset
Date: Thu, 17 May 2018 16:40:21 +0800 [thread overview]
Message-ID: <1526546422-7431-1-git-send-email-Anson.Huang@nxp.com> (raw)
Correct enet clock CCGR register offset.
CCGR6: IMX7D_ENET_AXI_ROOT_CLK (enet1 and enet2 bus clocks)
CCGR112: IMX7D_ENET1_TIME_ROOT_CLK, IMX7D_ENET1_IPG_ROOT_CLK
CCGR113: IMX7D_ENET2_TIME_ROOT_CLK, IMX7D_ENET2_IPG_ROOT_CLK
IMX7D_ENET_PHY_REF_ROOT_DIV supplies clock for PHY,
no gate after this clock, its parent clock root has gate.
IMX7D_ENET1_REF_ROOT_DIV/IMX7D_ENET2_REF_ROOT_DIV supplies clocks
for enet IPG_CLK_RMII, no gate after the clock, its parent
clock root has gate.
IMX7D_PLL_ENET_MAIN_125M_CLK (anatop pll) supplies clock for
enet RGMII tx_clk.
Based on Andy Duan's patch from the NXP kernel tree.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/clk/imx/clk-imx7d.c | 11 ++++++-----
include/dt-bindings/clock/imx7d-clock.h | 4 +++-
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 975a20d..485ab49 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -26,6 +26,8 @@ static u32 share_count_sai1;
static u32 share_count_sai2;
static u32 share_count_sai3;
static u32 share_count_nand;
+static u32 share_count_enet1;
+static u32 share_count_enet2;
static const struct clk_div_table test_div_table[] = {
{ .val = 3, .div = 1, },
@@ -805,6 +807,10 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_MIPI_DSI_ROOT_CLK] = imx_clk_gate4("mipi_dsi_root_clk", "mipi_dsi_post_div", base + 0x4650, 0);
clks[IMX7D_MIPI_CSI_ROOT_CLK] = imx_clk_gate4("mipi_csi_root_clk", "mipi_csi_post_div", base + 0x4640, 0);
clks[IMX7D_MIPI_DPHY_ROOT_CLK] = imx_clk_gate4("mipi_dphy_root_clk", "mipi_dphy_post_div", base + 0x4660, 0);
+ clks[IMX7D_ENET1_IPG_ROOT_CLK] = imx_clk_gate2_shared2("enet1_ipg_root_clk", "enet_axi_post_div", base + 0x4700, 0, &share_count_enet1);
+ clks[IMX7D_ENET1_TIME_ROOT_CLK] = imx_clk_gate2_shared2("enet1_time_root_clk", "enet1_time_post_div", base + 0x4700, 0, &share_count_enet1);
+ clks[IMX7D_ENET2_IPG_ROOT_CLK] = imx_clk_gate2_shared2("enet2_ipg_root_clk", "enet_axi_post_div", base + 0x4710, 0, &share_count_enet2);
+ clks[IMX7D_ENET2_TIME_ROOT_CLK] = imx_clk_gate2_shared2("enet2_time_root_clk", "enet2_time_post_div", base + 0x4710, 0, &share_count_enet2);
clks[IMX7D_SAI1_ROOT_CLK] = imx_clk_gate2_shared2("sai1_root_clk", "sai1_post_div", base + 0x48c0, 0, &share_count_sai1);
clks[IMX7D_SAI1_IPG_CLK] = imx_clk_gate2_shared2("sai1_ipg_clk", "ipg_root_clk", base + 0x48c0, 0, &share_count_sai1);
clks[IMX7D_SAI2_ROOT_CLK] = imx_clk_gate2_shared2("sai2_root_clk", "sai2_post_div", base + 0x48d0, 0, &share_count_sai2);
@@ -812,11 +818,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_SAI3_ROOT_CLK] = imx_clk_gate2_shared2("sai3_root_clk", "sai3_post_div", base + 0x48e0, 0, &share_count_sai3);
clks[IMX7D_SAI3_IPG_CLK] = imx_clk_gate2_shared2("sai3_ipg_clk", "ipg_root_clk", base + 0x48e0, 0, &share_count_sai3);
clks[IMX7D_SPDIF_ROOT_CLK] = imx_clk_gate4("spdif_root_clk", "spdif_post_div", base + 0x44d0, 0);
- clks[IMX7D_ENET1_REF_ROOT_CLK] = imx_clk_gate4("enet1_ref_root_clk", "enet1_ref_post_div", base + 0x44e0, 0);
- clks[IMX7D_ENET1_TIME_ROOT_CLK] = imx_clk_gate4("enet1_time_root_clk", "enet1_time_post_div", base + 0x44f0, 0);
- clks[IMX7D_ENET2_REF_ROOT_CLK] = imx_clk_gate4("enet2_ref_root_clk", "enet2_ref_post_div", base + 0x4500, 0);
- clks[IMX7D_ENET2_TIME_ROOT_CLK] = imx_clk_gate4("enet2_time_root_clk", "enet2_time_post_div", base + 0x4510, 0);
- clks[IMX7D_ENET_PHY_REF_ROOT_CLK] = imx_clk_gate4("enet_phy_ref_root_clk", "enet_phy_ref_post_div", base + 0x4520, 0);
clks[IMX7D_EIM_ROOT_CLK] = imx_clk_gate4("eim_root_clk", "eim_post_div", base + 0x4160, 0);
clks[IMX7D_NAND_RAWNAND_CLK] = imx_clk_gate2_shared2("nand_rawnand_clk", "nand_root_clk", base + 0x4140, 0, &share_count_nand);
clks[IMX7D_NAND_USDHC_BUS_RAWNAND_CLK] = imx_clk_gate2_shared2("nand_usdhc_rawnand_clk", "nand_usdhc_root_clk", base + 0x4140, 0, &share_count_nand);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index b2325d3e2..fef0647 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -455,5 +455,7 @@
#define IMX7D_SNVS_CLK 442
#define IMX7D_CAAM_CLK 443
#define IMX7D_KPP_ROOT_CLK 444
-#define IMX7D_CLK_END 445
+#define IMX7D_ENET1_IPG_ROOT_CLK 445
+#define IMX7D_ENET2_IPG_ROOT_CLK 446
+#define IMX7D_CLK_END 447
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
2.7.4
next reply other threads:[~2018-05-17 8:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 8:40 Anson Huang [this message]
2018-05-17 8:40 ` [PATCH 2/2] ARM: dts: imx7: correct enet clock settings Anson Huang
2018-05-17 11:22 ` [PATCH 1/2] clk: imx7d: correct enet clock CCGR register offset Stefan Agner
2018-05-18 1:06 ` Anson Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526546422-7431-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=adriana.reus@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=rui.silva@linaro.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).