From mboxrd@z Thu Jan 1 00:00:00 1970 From: michael.kao Subject: [PATCH v2 1/8] arm64: dts: mt8183: add thermal zone node Date: Fri, 10 May 2019 21:26:59 +0800 Message-ID: <1557494826-6044-2-git-send-email-michael.kao@mediatek.com> References: <1557494826-6044-1-git-send-email-michael.kao@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1557494826-6044-1-git-send-email-michael.kao@mediatek.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Zhang Rui , Eduardo Valentin , Daniel Lezcano , Rob Herring , Mark Rutland , Matthias Brugger , hsinyi@chromium.org Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, "michael.kao" , linux-mediatek@lists.infradead.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Add thermal zone node to Mediatek MT8183 dts file. Signed-off-by: Michael Kao --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 926df75..52ad47e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -334,6 +334,88 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt8183-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>, + <&infracfg CLK_INFRA_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + mediatek,hw-reset-temp = <117000>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + }; + + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&thermal 0>; + sustainable-power = <1500>; + }; + + /* The tzts1 ~ tzts6 don't need to polling */ + /* The tzts1 ~ tzts6 don't need to thermal throttle */ + + tzts1: tzts1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 1>; + sustainable-power = <0>; + trips {}; + cooling-maps {}; + }; + + tzts2: tzts2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 2>; + sustainable-power = <0>; + trips {}; + cooling-maps {}; + }; + + tzts3: tzts3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 3>; + sustainable-power = <0>; + trips {}; + cooling-maps {}; + }; + + tzts4: tzts4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 4>; + sustainable-power = <0>; + trips {}; + cooling-maps {}; + }; + + tzts5: tzts5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 5>; + sustainable-power = <0>; + trips {}; + cooling-maps {}; + }; + + tztsABB: tztsABB { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 6>; + sustainable-power = <0>; + trips {}; + cooling-maps {}; + }; + }; + audiosys: syscon@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; @@ -368,6 +450,9 @@ compatible = "mediatek,mt8183-efuse", "mediatek,efuse"; reg = <0 0x11f10000 0 0x1000>; + thermal_calibration: calib@180 { + reg = <0x180 0xc>; + }; }; mfgcfg: syscon@13000000 { -- 2.6.4