From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mason Yang Subject: [PATCH v16 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings Date: Wed, 31 Jul 2019 10:14:18 +0800 Message-ID: <1564539258-16313-3-git-send-email-masonccyang@mxic.com.tw> References: <1564539258-16313-1-git-send-email-masonccyang@mxic.com.tw> Return-path: In-Reply-To: <1564539258-16313-1-git-send-email-masonccyang@mxic.com.tw> Sender: linux-kernel-owner@vger.kernel.org To: broonie@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Geert Uytterhoeven , devicetree@vger.kernel.org Cc: juliensu@mxic.com.tw, Simon Horman , lee.jones@linaro.org, sergei.shtylyov@cogentembedded.com, Mason Yang , marek.vasut@gmail.com, miquel.raynal@bootlin.com List-Id: devicetree@vger.kernel.org Document the bindings used by the Renesas R-Car Gen3 RPC-IF controller. Signed-off-by: Mason Yang Reviewed-by: Rob Herring --- .../devicetree/bindings/spi/spi-renesas-rpc.txt | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt new file mode 100644 index 0000000..d4344c9 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt @@ -0,0 +1,45 @@ +Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings +--------------------------------------------------------- + +Required properties: +- compatible: should be an SoC-specific compatible value, followed by + "renesas,rcar-gen3-rpc" as a fallback. + supported SoC-specific values are: + "renesas,r8a77980-rpc" (R-Car V3H) + "renesas,r8a77995-rpc" (R-Car D3) +- reg: should contain three register areas: + first for the base address of RPC-IF registers, + second for the direct mapping read mode and + third for the write buffer area. +- reg-names: should contain "regs", "dirmap" and "wbuf" +- clocks: should contain the clock phandle/specifier pair for the module clock. +- clock-names: should contain "rpc" +- power-domains: should contain the power domain phandle/secifier pair. +- resets: should contain the reset controller phandle/specifier pair. +- #address-cells: should be 1 +- #size-cells: should be 0 +- flash: should be represented by a subnode of the RPC-IF node, + its "compatible" property contains "jedec,spi-nor" if SPI is used. + +Example: + + rpc: spi@ee200000 { + compatible = "renesas,r8a77995-rpc", "renesas,rcar-gen3-rpc"; + reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; -- 1.9.1