From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Wahren Subject: [PATCH V4 02/10] ARM: dts: bcm283x: Remove simple-bus from fixed clocks Date: Sun, 6 Oct 2019 17:28:20 +0200 Message-ID: <1570375708-26965-3-git-send-email-wahrenst@gmx.net> References: <1570375708-26965-1-git-send-email-wahrenst@gmx.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1570375708-26965-1-git-send-email-wahrenst@gmx.net> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Marcel Holtmann , Johan Hedberg , Rob Herring , Mark Rutland , Eric Anholt , Florian Fainelli , Ray Jui , Scott Branden Cc: devicetree@vger.kernel.org, Catalin Marinas , linux-bluetooth@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, Stefan Wahren , Will Deacon , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org The fixed clocks doesn't form some kind of bus. So let's remove it. This fixes the follow DT schema warnings: clocks: clock@3:reg:0: [3] is too short clocks: clock@4:reg:0: [4] is too short clocks: $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: 'ranges' is a required property clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Stefan Wahren --- arch/arm/boot/dts/bcm283x.dtsi | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 2d191fc..f16899d 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -650,22 +650,16 @@ }; clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - /* The oscillator is the root of the clock tree. */ - clk_osc: clock@3 { + clk_osc: clk-osc { compatible = "fixed-clock"; - reg = <3>; #clock-cells = <0>; clock-output-names = "osc"; clock-frequency = <19200000>; }; - clk_usb: clock@4 { + clk_usb: clk-usb { compatible = "fixed-clock"; - reg = <4>; #clock-cells = <0>; clock-output-names = "otg"; clock-frequency = <480000000>; -- 2.7.4