From: Kalle Valo <kvalo@codeaurora.org>
To: linux-wireless@vger.kernel.org
Cc: ath11k@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v3 18/49] ath11k: add dp_rx.h
Date: Fri, 15 Nov 2019 11:28:42 +0200 [thread overview]
Message-ID: <1573810153-29623-19-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1573810153-29623-1-git-send-email-kvalo@codeaurora.org>
(patches split for easier review, see the cover letter for more)
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/dp_rx.h | 84 +++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.h b/drivers/net/wireless/ath/ath11k/dp_rx.h
new file mode 100644
index 000000000000..026820fda568
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ */
+#ifndef ATH11K_DP_RX_H
+#define ATH11K_DP_RX_H
+
+#include "core.h"
+#include "rx_desc.h"
+#include "debug.h"
+
+#define DP_RX_MPDU_ERR_FCS BIT(0)
+#define DP_RX_MPDU_ERR_DECRYPT BIT(1)
+#define DP_RX_MPDU_ERR_TKIP_MIC BIT(2)
+#define DP_RX_MPDU_ERR_AMSDU_ERR BIT(3)
+#define DP_RX_MPDU_ERR_OVERFLOW BIT(4)
+#define DP_RX_MPDU_ERR_MSDU_LEN BIT(5)
+#define DP_RX_MPDU_ERR_MPDU_LEN BIT(6)
+#define DP_RX_MPDU_ERR_UNENCRYPTED_FRAME BIT(7)
+
+enum dp_rx_decap_type {
+ DP_RX_DECAP_TYPE_RAW,
+ DP_RX_DECAP_TYPE_NATIVE_WIFI,
+ DP_RX_DECAP_TYPE_ETHERNET2_DIX,
+ DP_RX_DECAP_TYPE_8023,
+};
+
+struct ath11k_dp_amsdu_subframe_hdr {
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ __be16 len;
+} __packed;
+
+struct ath11k_dp_rfc1042_hdr {
+ u8 llc_dsap;
+ u8 llc_ssap;
+ u8 llc_ctrl;
+ u8 snap_oui[3];
+ __be16 snap_type;
+} __packed;
+
+int ath11k_dp_rx_ampdu_start(struct ath11k *ar,
+ struct ieee80211_ampdu_params *params);
+int ath11k_dp_rx_ampdu_stop(struct ath11k *ar,
+ struct ieee80211_ampdu_params *params);
+void ath11k_peer_rx_tid_cleanup(struct ath11k *ar, struct ath11k_peer *peer);
+int ath11k_peer_rx_tid_setup(struct ath11k *ar, const u8 *peer_mac, int vdev_id,
+ u8 tid, u32 ba_win_sz, u16 ssn);
+void ath11k_dp_htt_htc_t2h_msg_handler(struct ath11k_base *ab,
+ struct sk_buff *skb);
+int ath11k_dp_rx_pdev_alloc(struct ath11k_base *ab, int pdev_idx);
+void ath11k_dp_rx_pdev_free(struct ath11k_base *ab, int pdev_idx);
+void ath11k_dp_reo_cmd_list_cleanup(struct ath11k_base *ab);
+void ath11k_dp_process_reo_status(struct ath11k_base *ab);
+int ath11k_dp_process_rxdma_err(struct ath11k_base *ab, int mac_id, int budget);
+int ath11k_dp_rx_process_wbm_err(struct ath11k_base *ab,
+ struct napi_struct *napi, int budget);
+int ath11k_dp_process_rx_err(struct ath11k_base *ab, struct napi_struct *napi,
+ int budget);
+int ath11k_dp_process_rx(struct ath11k_base *ab, int mac_id,
+ struct napi_struct *napi, struct sk_buff_head *pending_q,
+ int budget);
+int ath11k_dp_rxbufs_replenish(struct ath11k_base *ab, int mac_id,
+ struct dp_rxdma_ring *rx_ring,
+ int req_entries,
+ enum hal_rx_buf_return_buf_manager mgr,
+ gfp_t gfp);
+int ath11k_dp_htt_tlv_iter(struct ath11k_base *ab, const void *ptr, size_t len,
+ int (*iter)(struct ath11k_base *ar, u16 tag, u16 len,
+ const void *ptr, void *data),
+ void *data);
+int ath11k_dp_rx_process_mon_rings(struct ath11k_base *ab, int mac_id,
+ struct napi_struct *napi, int budget);
+int ath11k_dp_rx_process_mon_status(struct ath11k_base *ab, int mac_id,
+ struct napi_struct *napi, int budget);
+int ath11k_dp_rx_mon_status_bufs_replenish(struct ath11k_base *ab, int mac_id,
+ struct dp_rxdma_ring *rx_ring,
+ int req_entries,
+ enum hal_rx_buf_return_buf_manager mgr,
+ gfp_t gfp);
+int ath11k_dp_rx_pdev_mon_detach(struct ath11k *ar);
+int ath11k_dp_rx_pdev_mon_attach(struct ath11k *ar);
+
+#endif /* ATH11K_DP_RX_H */
next prev parent reply other threads:[~2019-11-15 9:30 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-15 9:28 [PATCH v3 00/49] ath11k: driver for Qualcomm IEEE 802.11ax devices Kalle Valo
2019-11-15 9:28 ` [PATCH v3 01/49] dt: bindings: net: add qcom,ath11k.yaml Kalle Valo
2019-11-23 0:23 ` Rob Herring
2019-11-15 9:28 ` [PATCH v3 02/49] ath11k: add Kconfig Kalle Valo
2019-11-15 9:28 ` [PATCH v3 03/49] ath11k: add Makefile Kalle Valo
2019-11-15 9:28 ` [PATCH v3 04/49] ath11k: add ahb.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 05/49] ath11k: add ahb.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 06/49] ath11k: add ce.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 07/49] ath11k: add ce.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 08/49] ath11k: add core.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 09/49] ath11k: add core.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 10/49] ath11k: add debug.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 11/49] ath11k: add debug.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 12/49] ath11k: add debug_htt_stats.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 13/49] ath11k: add debug_htt_stats.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 14/49] ath11k: add debugfs_sta.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 15/49] ath11k: add dp.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 16/49] ath11k: add dp.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 17/49] ath11k: add dp_rx.c Kalle Valo
2019-11-15 9:28 ` Kalle Valo [this message]
2019-11-15 9:28 ` [PATCH v3 19/49] ath11k: add dp_tx.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 20/49] ath11k: add dp_tx.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 21/49] ath11k: add hal.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 22/49] ath11k: add hal.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 23/49] ath11k: add hal_desc.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 24/49] ath11k: add hal_rx.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 25/49] ath11k: add hal_rx.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 26/49] ath11k: add hal_tx.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 27/49] ath11k: add hal_tx.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 28/49] ath11k: add htc.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 29/49] ath11k: add htc.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 30/49] ath11k: add hw.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 31/49] ath11k: add mac.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 32/49] ath11k: add mac.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 33/49] ath11k: add peer.c Kalle Valo
2019-11-15 9:28 ` [PATCH v3 34/49] ath11k: add peer.h Kalle Valo
2019-11-15 9:28 ` [PATCH v3 35/49] ath11k: add qmi.c Kalle Valo
2019-11-15 9:29 ` [PATCH v3 36/49] ath11k: add qmi.h Kalle Valo
2019-11-15 9:29 ` [PATCH v3 37/49] ath11k: add reg.c Kalle Valo
2019-11-15 9:29 ` [PATCH v3 38/49] ath11k: add reg.h Kalle Valo
2019-11-15 9:29 ` [PATCH v3 39/49] ath11k: add rx_desc.h Kalle Valo
2019-11-15 9:29 ` [PATCH v3 40/49] ath11k: add testmode.c Kalle Valo
2019-11-15 9:29 ` [PATCH v3 41/49] ath11k: add testmode.h Kalle Valo
2019-11-15 9:29 ` [PATCH v3 42/49] ath11k: add testmode_i.h Kalle Valo
2019-11-15 9:29 ` [PATCH v3 43/49] ath11k: add trace.c Kalle Valo
2019-11-15 9:29 ` [PATCH v3 44/49] ath11k: add trace.h Kalle Valo
2019-11-15 9:29 ` [PATCH v3 45/49] ath11k: add wmi.c Kalle Valo
2019-11-15 9:29 ` [PATCH v3 46/49] ath11k: add wmi.h Kalle Valo
2019-11-15 9:29 ` [PATCH v3 47/49] ath: add ath11k to Makefile Kalle Valo
2019-11-15 9:29 ` [PATCH v3 48/49] ath: add ath11k to Kconfig Kalle Valo
2019-11-15 9:29 ` [PATCH v3 49/49] MAINTAINERS: add ath11k Kalle Valo
2019-11-23 8:26 ` [PATCH v3 00/49] ath11k: driver for Qualcomm IEEE 802.11ax devices Kalle Valo
2019-11-25 12:31 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573810153-29623-19-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).