From: Zhou Yanjie <zhouyanjie@zoho.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
paul.burton@mips.com, paulburton@kernel.org,
mturquette@baylibre.com, sboyd@kernel.org, mark.rutland@arm.com,
syq@debian.org, paul@crapouillou.net, sernia.zhou@foxmail.com,
zhenwenjin@gmail.com
Subject: [PATCH 2/5] dt-bindings: clock: Add X1830 bindings.
Date: Wed, 27 Nov 2019 11:32:53 +0800 [thread overview]
Message-ID: <1574825576-91028-3-git-send-email-zhouyanjie@zoho.com> (raw)
In-Reply-To: <1574825576-91028-1-git-send-email-zhouyanjie@zoho.com>
Add the clock bindings for the X1830 Soc from Ingenic.
Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
.../devicetree/bindings/clock/ingenic,cgu.txt | 1 +
include/dt-bindings/clock/x1830-cgu.h | 46 ++++++++++++++++++++++
2 files changed, 47 insertions(+)
create mode 100644 include/dt-bindings/clock/x1830-cgu.h
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
index 75598e6..74bfc57 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
@@ -12,6 +12,7 @@ Required properties:
* ingenic,jz4770-cgu
* ingenic,jz4780-cgu
* ingenic,x1000-cgu
+ * ingenic,x1830-cgu
- reg : The address & length of the CGU registers.
- clocks : List of phandle & clock specifiers for clocks external to the CGU.
Two such external clocks should be specified - first the external crystal
diff --git a/include/dt-bindings/clock/x1830-cgu.h b/include/dt-bindings/clock/x1830-cgu.h
new file mode 100644
index 00000000..6499170
--- /dev/null
+++ b/include/dt-bindings/clock/x1830-cgu.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,x1830-cgu DT binding.
+ *
+ * They are roughly ordered as:
+ * - external clocks
+ * - PLLs
+ * - muxes/dividers in the order they appear in the x1830 programmers manual
+ * - gates in order of their bit in the CLKGR* registers
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_X1830_CGU_H__
+#define __DT_BINDINGS_CLOCK_X1830_CGU_H__
+
+#define X1830_CLK_EXCLK 0
+#define X1830_CLK_RTCLK 1
+#define X1830_CLK_APLL 2
+#define X1830_CLK_MPLL 3
+#define X1830_CLK_EPLL 4
+#define X1830_CLK_VPLL 5
+#define X1830_CLK_SCLKA 6
+#define X1830_CLK_CPUMUX 7
+#define X1830_CLK_CPU 8
+#define X1830_CLK_L2CACHE 9
+#define X1830_CLK_AHB0 10
+#define X1830_CLK_AHB2PMUX 11
+#define X1830_CLK_AHB2 12
+#define X1830_CLK_PCLK 13
+#define X1830_CLK_DDR 14
+#define X1830_CLK_MAC 15
+#define X1830_CLK_MSCMUX 16
+#define X1830_CLK_MSC0 17
+#define X1830_CLK_MSC1 18
+#define X1830_CLK_SSIPLL 19
+#define X1830_CLK_SSIMUX 20
+#define X1830_CLK_SSI0 21
+#define X1830_CLK_SMB0 22
+#define X1830_CLK_SMB1 23
+#define X1830_CLK_SMB2 24
+#define X1830_CLK_UART0 25
+#define X1830_CLK_UART1 26
+#define X1830_CLK_SSI1 27
+#define X1830_CLK_SFC 28
+#define X1830_CLK_PDMA 29
+
+#endif /* __DT_BINDINGS_CLOCK_X1830_CGU_H__ */
--
2.7.4
next prev parent reply other threads:[~2019-11-27 3:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-27 3:32 clk: Ingenic: Add support for the X1830 and add USB clk for X1000 Zhou Yanjie
2019-11-27 3:32 ` [PATCH 1/5] clk: Ingenic: Adjust code to make it compatible with X1830 Zhou Yanjie
2019-11-27 17:37 ` Paul Cercueil
2019-11-28 6:29 ` Zhou Yanjie
2019-11-29 11:23 ` Paul Cercueil
2019-12-10 22:55 ` Paul Burton
2019-11-27 3:32 ` Zhou Yanjie [this message]
2019-12-05 20:38 ` [PATCH 2/5] dt-bindings: clock: Add X1830 bindings Rob Herring
2019-11-27 3:32 ` [PATCH 3/5] clk: Ingenic: Add CGU driver for X1830 Zhou Yanjie
2019-11-27 3:32 ` [PATCH 4/5] dt-bindings: clock: Add USB OTG clock for X1000 Zhou Yanjie
2019-11-27 17:19 ` Paul Cercueil
2019-11-28 5:44 ` Zhou Yanjie
2019-11-27 3:32 ` [PATCH 5/5] clk: Ingenic: " Zhou Yanjie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574825576-91028-3-git-send-email-zhouyanjie@zoho.com \
--to=zhouyanjie@zoho.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=paul.burton@mips.com \
--cc=paul@crapouillou.net \
--cc=paulburton@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sernia.zhou@foxmail.com \
--cc=syq@debian.org \
--cc=zhenwenjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).