Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Tamizh Chelvam <tamizhr@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: devicetree@vger.kernel.org, linux-wireless@vger.kernel.org,
	Tamizh Chelvam <tamizhr@codeaurora.org>
Subject: [PATCHv2 1/2] dt-bindings: ath10k: Add new dt entries to identify coex support
Date: Tue, 28 Jan 2020 00:48:55 +0530
Message-ID: <1580152736-18654-1-git-send-email-tamizhr@codeaurora.org> (raw)

This adds new dt entries qcom,coexist-support and qcom,coexist-gpio-pin
which will be used by ath10k driver to identify coex support
of a hardware and notify wifi firmware the gpio pin number.
This pin number information is needed for the hardware QCA4019.

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
---
 Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 616c877..71bf91f 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -91,6 +91,11 @@ Optional properties:
 - qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
 		       mapped msa region.
 
+- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
+			 support by the hardware.
+- qcom,coexist-gpio-pin : gpio pin number  information to support coex
+			  which will be used by wifi firmware.
+
 Example (to supply PCI based wifi block details):
 
 In this example, the node is defined as child node of the PCI controller.
@@ -159,6 +164,8 @@ wifi0: wifi@a000000 {
 	qcom,msi_addr = <0x0b006040>;
 	qcom,msi_base = <0x40>;
 	qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
+	qcom,coexist-support = <1>;
+	qcom,coexist-gpio-pin = <0x33>;
 };
 
 Example (to supply wcn3990 SoC wifi block details):
-- 
1.9.1

             reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-27 19:18 Tamizh Chelvam [this message]
2020-01-27 19:18 ` [PATCHv2 2/2] ath10k: Add support to read btcoex related data from DT Tamizh Chelvam
2020-02-05 17:49 ` [PATCHv2 1/2] dt-bindings: ath10k: Add new dt entries to identify coex support Rob Herring
2020-02-11 14:23 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580152736-18654-1-git-send-email-tamizhr@codeaurora.org \
    --to=tamizhr@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git