From: Odelu Kukatla <okukatla@codeaurora.org>
To: georgi.djakov@linaro.org, daidavid1@codeaurora.org,
bjorn.andersson@linaro.org, evgreen@google.com,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: sboyd@kernel.org, ilina@codeaurora.org, seansw@qti.qualcomm.com,
elder@linaro.org, linux-pm@vger.kernel.org,
linux-arm-msm-owner@vger.kernel.org,
Odelu Kukatla <okukatla@codeaurora.org>
Subject: [v5, 3/3] arm64: dts: sc7180: Add interconnect provider DT nodes
Date: Tue, 3 Mar 2020 18:48:13 +0530 [thread overview]
Message-ID: <1583241493-21212-4-git-send-email-okukatla@codeaurora.org> (raw)
In-Reply-To: <1583241493-21212-1-git-send-email-okukatla@codeaurora.org>
Add the DT nodes for the network-on-chip interconnect buses found
on sc7180-based platforms.
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 96 ++++++++++++++++++++++++++++++++++++
1 file changed, 96 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index cc5a94f..27443de 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sc7180.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -748,6 +749,69 @@
};
};
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sc7180-config-noc";
+ reg = <0 0x01500000 0 0x28000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1620000 {
+ compatible = "qcom,sc7180-system-noc";
+ reg = <0 0x01620000 0 0x17080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect@1638000 {
+ compatible = "qcom,sc7180-mc-virt";
+ reg = <0 0x01638000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ qup_virt: interconnect@1650000 {
+ compatible = "qcom,sc7180-qup-virt";
+ reg = <0 0x01650000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sc7180-aggre1-noc";
+ reg = <0 0x016e0000 0 0x15080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1705000 {
+ compatible = "qcom,sc7180-aggre2-noc";
+ reg = <0 0x01705000 0 0x9000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ compute_noc: interconnect@170e000 {
+ compatible = "qcom,sc7180-compute-noc";
+ reg = <0 0x0170e000 0 0x6000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ compatible = "qcom,sc7180-mmss-noc";
+ reg = <0 0x01740000 0 0x1c100>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ ipa_virt: interconnect@1e00000 {
+ compatible = "qcom,sc7180-ipa-virt";
+ reg = <0 0x01e00000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
reg = <0 0x01f40000 0 0x40000>;
@@ -1103,6 +1167,13 @@
};
};
+ dc_noc: interconnect@9160000 {
+ compatible = "qcom,sc7180-dc-noc";
+ reg = <0 0x09160000 0 0x03200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
system-cache-controller@9200000 {
compatible = "qcom,sc7180-llcc";
reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
@@ -1110,6 +1181,20 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ gem_noc: interconnect@9680000 {
+ compatible = "qcom,sc7180-gem-noc";
+ reg = <0 0x09680000 0 0x3e200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ npu_noc: interconnect@9990000 {
+ compatible = "qcom,sc7180-npu-noc";
+ reg = <0 0x09990000 0 0x1600>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
@@ -1154,6 +1239,13 @@
};
};
+ camnoc_virt: interconnect@ac00000 {
+ compatible = "qcom,sc7180-camnoc-virt";
+ reg = <0 0x0ac00000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7180-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
@@ -1481,6 +1573,10 @@
};
};
};
+
+ apps_bcm_voter: bcm_voter {
+ compatible = "qcom,bcm-voter";
+ };
};
cpufreq_hw: cpufreq@18323000 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-03-03 13:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1583241493-21212-1-git-send-email-okukatla@codeaurora.org>
2020-03-03 13:18 ` [v5, 1/3] dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings Odelu Kukatla
2020-03-03 13:18 ` Odelu Kukatla [this message]
2020-03-04 16:30 ` [v5, 3/3] arm64: dts: sc7180: Add interconnect provider DT nodes Georgi Djakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1583241493-21212-4-git-send-email-okukatla@codeaurora.org \
--to=okukatla@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=daidavid1@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=elder@linaro.org \
--cc=evgreen@google.com \
--cc=georgi.djakov@linaro.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-msm-owner@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=seansw@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).