devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hector Yuan <hector.yuan@mediatek.com>
To: <linux-mediatek@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <wsd_upstream@mediatek.com>,
	<hector.yuan@mediatek.com>
Subject: [PATCH v7 1/2] cpufreq: mediatek-hw: Add support for Mediatek cpufreq HW driver
Date: Thu, 10 Sep 2020 12:31:01 +0800	[thread overview]
Message-ID: <1599712262-8819-2-git-send-email-hector.yuan@mediatek.com> (raw)
In-Reply-To: <1599712262-8819-1-git-send-email-hector.yuan@mediatek.com>

From: "Hector.Yuan" <hector.yuan@mediatek.com>

Add MT6779 cpufreq HW support.

Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
---
 drivers/cpufreq/Kconfig.arm           |   12 ++
 drivers/cpufreq/Makefile              |    1 +
 drivers/cpufreq/mediatek-cpufreq-hw.c |  277 +++++++++++++++++++++++++++++++++
 3 files changed, 290 insertions(+)
 create mode 100644 drivers/cpufreq/mediatek-cpufreq-hw.c

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index c6cbfc8..8e58c12 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -121,6 +121,18 @@ config ARM_MEDIATEK_CPUFREQ
 	help
 	  This adds the CPUFreq driver support for MediaTek SoCs.
 
+config ARM_MEDIATEK_CPUFREQ_HW
+	tristate "MediaTek CPUFreq HW driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	default m
+	help
+	  Support for the CPUFreq HW driver.
+	  Some MediaTek chipsets have a HW engine to offload the steps
+	  necessary for changing the frequency of the CPUs. Firmware loaded
+	  in this engine exposes a programming interface to the OS.
+	  The driver implements the cpufreq interface for this HW engine.
+	  Say Y if you want to support CPUFreq HW.
+
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index f6670c4..dc1f371 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_IMX_CPUFREQ_DT)	+= imx-cpufreq-dt.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ_HW)	+= mediatek-cpufreq-hw.o
 obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
new file mode 100644
index 0000000..8fa12e5
--- /dev/null
+++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#define LUT_MAX_ENTRIES			32U
+#define LUT_FREQ			GENMASK(11, 0)
+#define LUT_ROW_SIZE			0x4
+
+enum {
+	REG_LUT_TABLE,
+	REG_ENABLE,
+	REG_PERF_STATE,
+
+	REG_ARRAY_SIZE,
+};
+
+struct cpufreq_mtk {
+	struct cpufreq_frequency_table *table;
+	void __iomem *reg_bases[REG_ARRAY_SIZE];
+	cpumask_t related_cpus;
+};
+
+static const u16 cpufreq_mtk_offsets[REG_ARRAY_SIZE] = {
+	[REG_LUT_TABLE]		= 0x0,
+	[REG_ENABLE]		= 0x84,
+	[REG_PERF_STATE]	= 0x88,
+};
+
+static struct cpufreq_mtk *mtk_freq_domain_map[NR_CPUS];
+
+static int mtk_cpufreq_hw_target_index(struct cpufreq_policy *policy,
+				       unsigned int index)
+{
+	struct cpufreq_mtk *c = policy->driver_data;
+
+	writel_relaxed(index, c->reg_bases[REG_PERF_STATE]);
+
+	return 0;
+}
+
+static unsigned int mtk_cpufreq_hw_get(unsigned int cpu)
+{
+	struct cpufreq_mtk *c;
+	unsigned int index;
+
+	c = mtk_freq_domain_map[cpu];
+
+	index = readl_relaxed(c->reg_bases[REG_PERF_STATE]);
+	index = min(index, LUT_MAX_ENTRIES - 1);
+
+	return c->table[index].frequency;
+}
+
+static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpufreq_mtk *c;
+
+	c = mtk_freq_domain_map[policy->cpu];
+	if (!c) {
+		pr_err("No scaling support for CPU%d\n", policy->cpu);
+		return -ENODEV;
+	}
+
+	cpumask_copy(policy->cpus, &c->related_cpus);
+
+	policy->freq_table = c->table;
+	policy->driver_data = c;
+
+	/* HW should be in enabled state to proceed now */
+	writel_relaxed(0x1, c->reg_bases[REG_ENABLE]);
+
+	return 0;
+}
+
+static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct cpufreq_mtk *c;
+
+	c = mtk_freq_domain_map[policy->cpu];
+	if (!c) {
+		pr_err("No scaling support for CPU%d\n", policy->cpu);
+		return -ENODEV;
+	}
+
+	/* HW should be in paused state now */
+	writel_relaxed(0x0, c->reg_bases[REG_ENABLE]);
+
+	return 0;
+}
+
+static struct cpufreq_driver cpufreq_mtk_hw_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= mtk_cpufreq_hw_target_index,
+	.get		= mtk_cpufreq_hw_get,
+	.init		= mtk_cpufreq_hw_cpu_init,
+	.exit		= mtk_cpufreq_hw_cpu_exit,
+	.name		= "mtk-cpufreq-hw",
+	.attr		= cpufreq_generic_attr,
+};
+
+static int mtk_cpu_create_freq_table(struct platform_device *pdev,
+				     struct cpufreq_mtk *c)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *base_table;
+	u32 data, i, freq, prev_freq = 0;
+
+	c->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
+				sizeof(*c->table), GFP_KERNEL);
+	if (!c->table)
+		return -ENOMEM;
+
+	base_table = c->reg_bases[REG_LUT_TABLE];
+
+	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
+		data = readl_relaxed(base_table + (i * LUT_ROW_SIZE));
+		freq = FIELD_GET(LUT_FREQ, data) * 1000;
+
+		if (freq == prev_freq)
+			break;
+
+		c->table[i].frequency = freq;
+
+		dev_dbg(dev, "index=%d freq=%d\n",
+			i, c->table[i].frequency);
+
+		prev_freq = freq;
+	}
+
+	c->table[i].frequency = CPUFREQ_TABLE_END;
+
+	return 0;
+}
+
+static int mtk_get_related_cpus(int index, struct cpufreq_mtk *c)
+{
+	struct device_node *cpu_np;
+	struct of_phandle_args args;
+	int cpu, ret;
+
+	for_each_possible_cpu(cpu) {
+		cpu_np = of_cpu_device_node_get(cpu);
+		if (!cpu_np)
+			continue;
+
+		ret = of_parse_phandle_with_args(cpu_np, "mtk-freq-domain",
+						 "#freq-domain-cells", 0,
+						 &args);
+		of_node_put(cpu_np);
+		if (ret < 0)
+			continue;
+
+		if (index == args.args[0]) {
+			cpumask_set_cpu(cpu, &c->related_cpus);
+			mtk_freq_domain_map[cpu] = c;
+		}
+	}
+
+	return 0;
+}
+
+static int mtk_cpu_resources_init(struct platform_device *pdev,
+				  unsigned int cpu, int index,
+				  const u16 *offsets)
+{
+	struct cpufreq_mtk *c;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	int ret, i;
+	void __iomem *base;
+
+	if (mtk_freq_domain_map[cpu])
+		return 0;
+
+	c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, index);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = REG_LUT_TABLE; i < REG_ARRAY_SIZE; i++)
+		c->reg_bases[i] = base + offsets[i];
+
+	ret = mtk_get_related_cpus(index, c);
+	if (ret) {
+		dev_err(dev, "Domain-%d failed to get related CPUs\n", index);
+		return ret;
+	}
+
+	ret = mtk_cpu_create_freq_table(pdev, c);
+	if (ret) {
+		dev_err(dev, "Domain-%d failed to create freq table\n", index);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
+{
+	struct device_node *cpu_np;
+	struct of_phandle_args args;
+	const u16 *offsets;
+	unsigned int cpu;
+	int ret;
+
+	offsets = of_device_get_match_data(&pdev->dev);
+	if (!offsets)
+		return -EINVAL;
+
+	for_each_possible_cpu(cpu) {
+		cpu_np = of_cpu_device_node_get(cpu);
+		if (!cpu_np) {
+			dev_err(&pdev->dev, "Failed to get cpu %d device\n",
+				cpu);
+			return -ENODEV;
+		}
+
+		ret = of_parse_phandle_with_args(cpu_np, "mtk-freq-domain",
+						 "#freq-domain-cells", 0,
+						 &args);
+		if (ret < 0)
+			return ret;
+
+		/* Get the bases of cpufreq for domains */
+		ret = mtk_cpu_resources_init(pdev, cpu, args.args[0], offsets);
+		if (ret) {
+			dev_err(&pdev->dev, "CPUFreq resource init failed\n");
+			return ret;
+		}
+	}
+
+	ret = cpufreq_register_driver(&cpufreq_mtk_hw_driver);
+	if (ret) {
+		dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mtk_cpufreq_hw_driver_remove(struct platform_device *pdev)
+{
+	return cpufreq_unregister_driver(&cpufreq_mtk_hw_driver);
+}
+
+static const struct of_device_id mtk_cpufreq_hw_match[] = {
+	{ .compatible = "mediatek,cpufreq-hw", .data = &cpufreq_mtk_offsets },
+	{}
+};
+
+static struct platform_driver mtk_cpufreq_hw_driver = {
+	.probe = mtk_cpufreq_hw_driver_probe,
+	.remove = mtk_cpufreq_hw_driver_remove,
+	.driver = {
+		.name = "mtk-cpufreq-hw",
+		.of_match_table = mtk_cpufreq_hw_match,
+	},
+};
+module_platform_driver(mtk_cpufreq_hw_driver);
+
+MODULE_DESCRIPTION("Mediatek cpufreq-hw driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

  reply	other threads:[~2020-09-10  4:31 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-10  4:31 [PATCH v7] cpufreq: mediatek-hw: Add support for Mediatek cpufreq HW driver Hector Yuan
2020-09-10  4:31 ` Hector Yuan [this message]
2020-09-10  4:31 ` [PATCH v7 2/2] dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW Hector Yuan
2020-09-21  2:23   ` Hector Yuan
2020-09-22 20:28   ` Rob Herring
2020-09-23 13:10     ` Hector Yuan
2020-09-24  2:36       ` Hector Yuan
2020-09-25  2:27       ` Hector Yuan
2020-09-25  6:15         ` Viresh Kumar
2020-09-25  7:25           ` Hector Yuan
2020-10-05  2:29             ` Hector Yuan
2020-09-10  5:03 ` [PATCH v7] cpufreq: mediatek-hw: Add support for Mediatek cpufreq HW driver Viresh Kumar
2020-09-10  5:30   ` Hector Yuan
2020-09-10  5:34     ` Viresh Kumar
2020-09-16 11:39       ` Hector Yuan
2020-09-17  2:31         ` Hector Yuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1599712262-8819-2-git-send-email-hector.yuan@mediatek.com \
    --to=hector.yuan@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=viresh.kumar@linaro.org \
    --cc=wsd_upstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).