From: dillon.minfei@gmail.com
To: robh@kernel.org, valentin.caron@foss.st.com,
Alexandre.torgue@foss.st.com, rong.a.chen@intel.com,
a.fatoum@pengutronix.de, mcoquelin.stm32@gmail.com,
devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux@armlinux.org.uk,
afzal.mohd.ma@gmail.com, gregkh@linuxfoundation.org,
erwan.leray@foss.st.com, erwan.leray@st.com,
linux-serial@vger.kernel.org, lkp@intel.com,
patrice.chotard@foss.st.com, corbet@lwn.net,
linux-doc@vger.kernel.org, pali@kernel.org,
mchehab+huawei@kernel.org, andrew@lunn.ch
Cc: dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v9 0/6] ARM: STM32: add art-pi(stm32h750xbh6) board support
Date: Wed, 31 Mar 2021 16:28:39 +0800 [thread overview]
Message-ID: <1617179325-6383-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
This patchset intend to add art-pi board support, this board developed
by rt-thread(https://www.rt-thread.org/).
Board resources:
8MiB QSPI flash
16MiB SPI flash
32MiB SDRAM
AP6212 wifi,bt,fm comb
sw context:
- as stm32h750 just has 128k bytes internal flash, so running a fw on
internal flash to download u-boot/kernel to qspi flash, boot
u-boot/kernel from qspi flash. this fw is based on rt-thread.
- kernel can be xip on qspi flash or load to sdram
- root filesystem is jffs2(created by buildroot), stored on spi flash
to support the boad, add following changes.
- fix r0-r3, r12 register restore failed after svc call,
- add dts binding
- update yaml doc
---
changes in v9:
- move gpio{a..k} entries from stm32h7-pinctrl.dtsi to stm32h743.dtsi
v8 link:
https://lore.kernel.org/lkml/1617094704-10040-1-git-send-email-dillon.minfei@gmail.com/
changes in v8:
- drop '[PATCH v7 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to
support stm32h750' - stm32h743-pinctrl.dtsi file
- move compatible string "st,stm32h743-pinctrl" from stm32h7-pinctrl.dtsi
to stm32h743.dtsi
- update stm32h743i-{dico/eval}.dtsi to include stm32h7-pinctrl.dtsi
- move file stm32h743.dtsi submit position to [PATCH V8 3/6]
v7 link:
https://lore.kernel.org/lkml/1617071338-9436-1-git-send-email-dillon.minfei@gmail.com/
changes in v7:
- remove changes in
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
Hi Rob Herring
as you has already ack this patch, please ignore it. thanks
history link:
https://lore.kernel.org/lkml/1614758717-18223-4-git-send-email-dillon.minfei@gmail.com/
https://lore.kernel.org/lkml/20210308195033.GA2855292@robh.at.kernel.org/
- remove "[PATCH v6 8/9] pinctrl: stm32: Add STM32H750 MCU pinctrl support"
remove "[PATCH v6 5/9] ARM: dts: stm32: add stm32h750-pinctrl.dtsi"
- reference to stm32h743-pinctrl.dtsi in stm32h750i-art-pi.dts
v6 link:
https://lore.kernel.org/lkml/1616757302-7889-1-git-send-email-dillon.minfei@gmail.com/
changes in v6:
- add gpiox{gpio-ranges, ngpios} in stm32h7-pinctrl.dtsi
- add status="disabled" in stm32h743.dtsi
changes in v5:
- accroding to rob's suggestion, replace false with 'type: object'
of 'additionalProperties'.
- add Tested-by: Valentin Caron <valentin.caron@foss.st.com>
changes in v4:
- use unevaluatedProperties: false to fix dtbs_check warrnings instead of
add 'bluetooth' in st,stm32-uart.yaml
changes in v3:
- fix dtbs_check warrning: (8002cbd78fd5 and 4bc21d3dd678)
>> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: pin-controller:
{'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells':
[[1]], 'ranges': [[0,
>> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: 'i2c@40005C00',
'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$',
'^[^@]+$', 'pinctrl-[0-9]+'
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800:
'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'
changes in v2:
- reorganize the pinctrl device tree about
stm32h7-pinctrl/stm32h743/750-pinctrl
stm32h7-pinctrl.dtsi --> stm32h743-pinctrl.dtsi --> stm32h743i-disco.dts
| |-> stm32h743i-eval.dts
|-> stm32h750-pinctrl.dtsi --> stm32h750i-art-pi.dts
same to the stm32f7/f4's pinctrl style
- fix author name/copyright mistake
- add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they
have same pin alternate functions, update Kconfig description
- make item in stm32h750i-art-pi.dts sort by letter
*** BLURB HERE ***
dillon min (6):
Documentation: arm: stm32: Add stm32h750 value line doc
dt-bindings: arm: stm32: Add compatible strings for ART-PI board
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
ARM: stm32: Add a new SOC - STM32H750
dt-bindings: serial: stm32: Use 'type: object' instead of false for
'additionalProperties'
Documentation/arm/index.rst | 1 +
Documentation/arm/stm32/stm32h750-overview.rst | 34 +++
.../devicetree/bindings/arm/stm32/stm32.yaml | 4 +
.../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 275 ++++++++++++++++++
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 306 ---------------------
arch/arm/boot/dts/stm32h743.dtsi | 176 +++++++++++-
arch/arm/boot/dts/stm32h743i-disco.dts | 2 +-
arch/arm/boot/dts/stm32h743i-eval.dts | 2 +-
arch/arm/boot/dts/stm32h750.dtsi | 6 +
arch/arm/boot/dts/stm32h750i-art-pi.dts | 229 +++++++++++++++
arch/arm/mach-stm32/board-dt.c | 1 +
13 files changed, 729 insertions(+), 311 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32h750-overview.rst
create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi
delete mode 100644 arch/arm/boot/dts/stm32h743-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32h750.dtsi
create mode 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts
--
2.7.4
next reply other threads:[~2021-03-31 8:29 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 8:28 dillon.minfei [this message]
2021-03-31 8:28 ` [PATCH v9 1/6] Documentation: arm: stm32: Add stm32h750 value line doc dillon.minfei
2021-03-31 8:28 ` [PATCH v9 2/6] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei
2021-03-31 8:28 ` [PATCH v9 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei
2021-03-31 8:28 ` [PATCH v9 4/6] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei
2021-03-31 8:28 ` [PATCH v9 5/6] ARM: stm32: Add a new SOC - STM32H750 dillon.minfei
2021-03-31 8:28 ` [PATCH v9 6/6] dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' dillon.minfei
2021-04-01 7:59 ` [PATCH v9 0/6] ARM: STM32: add art-pi(stm32h750xbh6) board support Alexandre TORGUE
2021-04-01 8:08 ` dillon min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617179325-6383-1-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=Alexandre.torgue@foss.st.com \
--cc=a.fatoum@pengutronix.de \
--cc=afzal.mohd.ma@gmail.com \
--cc=andrew@lunn.ch \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=erwan.leray@foss.st.com \
--cc=erwan.leray@st.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=lkp@intel.com \
--cc=mchehab+huawei@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=pali@kernel.org \
--cc=patrice.chotard@foss.st.com \
--cc=robh@kernel.org \
--cc=rong.a.chen@intel.com \
--cc=valentin.caron@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).