From: Bin Liu <b-liu-l0cyMroinI0@public.gmane.org>
To: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org
Subject: Re: [PATCH 1/5 v10] dt/bindings: Add binding for the DA8xx MUSB driver
Date: Fri, 11 Mar 2016 09:51:15 -0600 [thread overview]
Message-ID: <20160311155115.GC20204@uda0271908> (raw)
In-Reply-To: <1457684989-13318-1-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
Hi,
On Fri, Mar 11, 2016 at 09:29:45AM +0100, Petr Kulhavy wrote:
> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver.
It seems the dts(i) file is not touched in this patch set, so DA8xx MUSB
still does not use DT with these patches? Or did I miss anything?
Thanks,
-Bin.
>
> Signed-off-by: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
> ---
> v1: <initial>
>
> v2:
> - using standard properties "dr_mode", "mentor,power", "mentor,num-eps", "mentor,multipoint", "mentor,ram-bits"
> - using "ti," prefix instead of "da8xx," for specific property names
> - no wildcards in compatibility string
>
> v3:
> - added "reg", "interrupts" and "interrupt-names" properties
> - wildcards in compatibility string
>
> v4:
> - compatibility string set to "ti,da830-musb"
> - "mentor,num-eps", "mentor,multipoint", "mentor,ram-bits" properties removed and hardcoded
> - "ti,phy20-clkmux-cfg" renamed to "ti,phy20-clkmux-pll" and changed to boolean
> - removed "ti,hwmods"
>
> v5:
> - "ti,phy20-refclock-frequency" property made mandatory
>
> v6:
> - using "ti,usb2-phy-" prefix instead of "ti,phy20-" for the specific properties
>
> v7:
> - removed the "mentor,power" property; hard coded to 500mA in the code
>
> v8:
> - "ti,usb2-phy-refclock-frequency" renamed to "ti,usb2-phy-refclock-hz" and description amended
> - "ti,usb2-phy-clkmux-pll" changed to "ti,usb2-phy-clkmux-refclkin" to reflect the more common case
> - USB maximum power modelled via a regulator "vbus-supply"
>
> v9: <no change>
> v10: <no change>
>
> .../devicetree/bindings/usb/da8xx-usb.txt | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> new file mode 100644
> index 0000000..a6eda5b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> @@ -0,0 +1,45 @@
> +TI DA8xx MUSB
> +~~~~~~~~~~~~~
> +For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
> +
> +Required properties:
> +~~~~~~~~~~~~~~~~~~~~
> + - compatible : Should be set to "ti,da830-musb".
> +
> + - reg: Offset and length of the USB controller register set.
> +
> + - interrupts: The USB interrupt number.
> +
> + - interrupt-names: Should be set to "mc".
> +
> + - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
> +
> + - vbus-supply: Phandle to a regulator providing the USB bus power.
> +
> + - ti,usb2-phy-refclock-hz : Integer. Frequency in Hz of the USB 2.0 PHY reference clock,
> + either provided by the internal PLL or an external source.
> + The supported values are: 12MHz, 13MHz, 19.2MHz, 20MHz, 24MHz, 26MHz, 38.4MHz, 40MHz, 48MHz.
> +
> +
> +Optional properties:
> +~~~~~~~~~~~~~~~~~~~~
> + - ti,usb2-phy-clkmux-refclkin: Boolean. Defines the USB 2.0 PHY reference clock source.
> + If present the the external USB_REFCLKIN pin is used as a clock source, otherwise
> + the internal PLL is used.
> +
> +Example:
> +
> + usb20: usb@1e00000 {
> + compatible = "ti,da830-musb";
> + reg = <0x00200000 0x10000>;
> + interrupt-parent = <&intc>;
> + interrupts = <58>;
> + interrupt-names = "mc";
> +
> + dr_mode = "host";
> + vbus-supply = <&usb_vbus>;
> +
> + ti,usb2-phy-refclock-hz = <24000000>;
> +
> + status = "okay";
> + };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-03-11 15:51 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-11 8:29 [PATCH 1/5 v10] dt/bindings: Add binding for the DA8xx MUSB driver Petr Kulhavy
[not found] ` <1457684989-13318-1-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-03-11 8:29 ` [PATCH 2/5 v10] usb: musb: core: added helper function for parsing DT Petr Kulhavy
2016-03-11 8:29 ` [PATCH 3/5 v10] usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config Petr Kulhavy
[not found] ` <1457684989-13318-3-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-03-11 15:54 ` Bin Liu
2016-03-11 8:29 ` [PATCH 4/5 v10] ARM: davinci: defined missing CFGCHIP2_REFFREQ_* macros for MUSB PHY Petr Kulhavy
2016-03-11 8:29 ` [PATCH 5/5 v10] usb: musb: da8xx: Add DT support for the DA8xx driver Petr Kulhavy
[not found] ` <1457684989-13318-5-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-03-11 11:22 ` Sergei Shtylyov
2016-03-11 11:24 ` [PATCH 1/5 v10] dt/bindings: Add binding for the DA8xx MUSB driver Sergei Shtylyov
2016-03-11 15:51 ` Bin Liu [this message]
2016-03-11 15:58 ` Petr Kulhavy
[not found] ` <56E2EB3C.6080602-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-03-11 16:06 ` Bin Liu
2016-03-11 16:21 ` Petr Kulhavy
[not found] ` <56E2F078.9020708-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-03-11 18:24 ` Sergei Shtylyov
[not found] ` <56E30D43.9030508-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-03-16 14:56 ` Petr Kulhavy
2016-03-11 18:27 ` Sergei Shtylyov
[not found] ` <56E30E0B.7020203-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-03-11 18:32 ` Bin Liu
2016-03-14 7:00 ` Felipe Balbi
[not found] ` <87fuvtbl26.fsf-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-03-15 2:07 ` David Lechner
[not found] ` <56E76E5A.5060801-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-03-15 7:52 ` Felipe Balbi
2016-04-04 8:45 ` Petr Kulhavy
[not found] ` <57022992.4060008-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-04-04 16:25 ` David Lechner
2016-03-18 19:14 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160311155115.GC20204@uda0271908 \
--to=b-liu-l0cymroini0@public.gmane.org \
--cc=balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).