From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Chen Subject: Re: [RFC v2 00/13] usb/mmc/power: Fix USB/LAN when TFTP booting Date: Tue, 31 May 2016 08:58:08 +0800 Message-ID: <20160531005808.GA7913@shlinux2> References: <1462451666-17945-1-git-send-email-k.kozlowski@samsung.com> <20160505224240.GA31429@rob-hp-laptop> <20160509181829.GA19687@rob-hp-laptop> <20160528033613.GA3291@shlinux2> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20160528033613.GA3291@shlinux2> Sender: linux-mmc-owner@vger.kernel.org To: Ulf Hansson Cc: Rob Herring , Krzysztof Kozlowski , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , linux-samsung-soc , linux-mmc , "linux-pm@vger.kernel.org" , linux-usb@vger.kernel.org, Sebastian Reichel , Dmitry Eremin-Solenikov , David Woodhouse , Greg Kroah-Hartman , Mark Brown , hverkuil@xs4all.nl, tjakobi@math.uni-bielefeld.de, Bartlomiej Zolnierkiewicz , Marek Szyprowski , Arnd Bergmann List-Id: devicetree@vger.kernel.org On Sat, May 28, 2016 at 11:36:13AM +0800, Peter Chen wrote: > On Tue, May 10, 2016 at 01:02:08PM +0200, Ulf Hansson wrote: > > + Arnd > > > > [...] > > > > >> >> Solution > > >> >> ======== > > >> >> This is very similar to the MMC pwrseq behavior so the idea is to: > > >> >> 1. Move MMC pwrseq drivers to generic place, > > >> > > > >> > You can do that, but I'm going to NAK any use of pwrseq bindings outside > > >> > of MMC. I think it is the wrong way to do things. The DT should describe > > >> > > >> Huh, I didn't know that was your view of the mmc pwrseq bindings. Why > > >> didn't you NAK them before? > > > > > > Unfortunately, either I missed it or it was a time I couldn't spend much > > > time on reviews. > > > > Okay, I guess it's common issue among maintainers. The problem with DT > > is that it gets really hard to be fixed up later. :-) > > > > > > > >> > the devices. If they happen to be "simple" then the core can walk the > > >> > tree and do any setup. For example, look for "reset-gpios" and toggle > > >> > that GPIO. There is no need for a special node. > > >> > > > >> >> 2. Extend the pwrseq-simple with regulator toggling, > > >> >> 3. Add support to USB hub and port core for pwrseq, > > >> > > > >> > We discussed this for USB already[1] and is why we defined how to add > > >> > USB child devices. The idea is not to add pwrseq to that. > > >> > > >> I am not familiar with the USB discussion. > > >> > > >> Still, let me give you some more background to the mmc pwrseq. The > > >> idea from the mmc pwrseq bindings comes from the power-domain DT > > >> bindings, as I thought these things were a bit related. > > >> In both cases they are not directly a property of the device, but more > > >> describing a HW dependency to allow the device to work. > > > > > > I could see this as a board level power domain. However the difference > > > is we are not generally exposing internal SOC details the same way as > > > board level components. Perhaps we could extend power domains to board > > > level, but that is not what was done here. > > > > > >> One could probably use a child node instead of a phandle, but that > > >> wasn't chosen back then. Of course you are the DT expert, but could > > >> you perhaps tell me why a child node is better for cases like this? > > > > > > If there is a control path hierarchy, then we try to model that in DT > > > with child nodes. In cases of SDIO and USB, there is a clear hierarchy. > > > Ignoring the discovery ordering problem, we already have defined ways to > > > describe GPIO connections, regulators, etc. to devices. Describing those > > > things separately from the device to solve a particular issue that is > > > really a kernel limitation is what I don't like. > > > > Okay, I see. > > > > To move forward in trying to make mmc pwrseq a generic pwrseq, could > > we perhaps allow both cases? > > > > In the mmc case, there are already deployed bindings so we need to > > cope with these by using the phandle option, but for USB etc we could > > force the child node option. > > As long as we agree that we keep using a compatible string for the > > child node as well, both options should be able to co-exist and we > > should probably be able to managed them both from a common pwrseq > > driver framework. > > > > Although, I do remember from an older conversations around some of > > mine submission for the mmc pwrseq code, that some people (maybe > > Arnd?) wasn't keen on adding a new framework for this. Perhaps that > > has changed? > > > > All, how we move on for this? > > 1. Using a generic driver to manage both mmc and USB (and further > subsystem), USB and further subsystem do not use pwrseq node in dts. > 2. USB creates the similar driver under drivers/usb for its own use. > > Which one do you prefer, thanks. > Hi Krzysztof Kozlowski, I think option 1 may be better according to Rob and Ulf's comment. Would you like going on your patch set? You can work on generic pwrseq driver, I will do USB stuffs based on generic pwrseq driver? -- Best Regards, Peter Chen