From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Agner Subject: [PATCH v2 3/5] ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics Date: Sun, 26 Jun 2016 01:47:53 -0700 Message-ID: <20160626084755.21925-4-stefan@agner.ch> References: <20160626084755.21925-1-stefan@agner.ch> Return-path: In-Reply-To: <20160626084755.21925-1-stefan@agner.ch> Sender: linux-kernel-owner@vger.kernel.org To: shawnguo@kernel.org, kernel@pengutronix.de Cc: max.krummenacher@toradex.com, marcel.ziswiler@toradex.com, fabio.estevam@nxp.com, galak@codeaurora.org, ijc+devicetree@hellion.org.uk, mark.rutland@arm.com, pawel.moll@arm.com, robh+dt@kernel.org, grinberg@compulab.co.il, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Agner List-Id: devicetree@vger.kernel.org The i.MX 7Solo implements a subset of features available on i.MX 7Dual. Recreate imx7s.dtsi as the base device tree for i.MX 7Dual boards. The i.MX 7Dual's additional features over i.MX 7Solo are: - Second Cortex-A7 core - Second Gigabit Ethernet controller - EPD (Electronc Paper Display, not yet part of the device tree) - PCIe (not yet part of the device tree) - Additional USB2.0 OTG controller Signed-off-by: Stefan Agner --- arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 2 +- arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +- arch/arm/boot/dts/imx7d-sdb.dts | 2 +- arch/arm/boot/dts/imx7d.dtsi | 128 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7s.dtsi | 79 +------------------- 5 files changed, 133 insertions(+), 80 deletions(-) create mode 100644 arch/arm/boot/dts/imx7d.dtsi diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 3942c7d..4863451 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -13,7 +13,7 @@ /dts-v1/; #include -#include "imx7s.dtsi" +#include "imx7d.dtsi" / { model = "CompuLab CL-SOM-iMX7"; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 8e993cb..bef394e 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -43,7 +43,7 @@ /dts-v1/; #include -#include "imx7s.dtsi" +#include "imx7d.dtsi" / { model = "Boundary Devices i.MX7 Nitrogen7 Board"; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 1286569..d6da506 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -43,7 +43,7 @@ /dts-v1/; #include -#include "imx7s.dtsi" +#include "imx7d.dtsi" / { model = "Freescale i.MX7 SabreSD Board"; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi new file mode 100644 index 0000000..51c13cb --- /dev/null +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7s.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + etm@3007d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007d000 0x1000>; + + /* + * System will hang if added nosmp in kernel command line + * without arm,primecell-periphid because amba bus try to + * read id and core1 power off at this time. + */ + arm,primecell-periphid = <0xbb956>; + cpu = <&cpu1>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; +}; + +&aips3 { + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + }; + + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupts = , + , + ; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; +}; + +&ca_funnel_ports { + port@1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index d70d55d..672dde2 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1,5 +1,6 @@ /* * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2016 Toradex AG * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -87,12 +88,6 @@ clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX7D_CLK_ARM>; }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; }; intc: interrupt-controller@31001000 { @@ -263,7 +258,7 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { + ca_funnel_ports: ports { #address-cells = <1>; #size-cells = <0>; @@ -276,14 +271,6 @@ }; }; - port@1 { - reg = <1>; - ca_funnel_in_port1: endpoint { - slave-mode; - remote-endpoint = <&etm1_out_port>; - }; - }; - /* funnel output port */ port@2 { reg = <0>; @@ -310,27 +297,6 @@ }; }; - etm@3007d000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x3007d000 0x1000>; - - /* - * System will hang if added nosmp in kernel command line - * without arm,primecell-periphid because amba bus try to - * read id and core1 power off at this time. - */ - arm,primecell-periphid = <0xbb956>; - cpu = <&cpu1>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port { - etm1_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port1>; - }; - }; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -819,17 +785,6 @@ status = "disabled"; }; - usbotg2: usb@30b20000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b20000 0x200>; - interrupts = ; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop2>; - fsl,usbmisc = <&usbmisc2 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - usbh: usb@30b30000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b30000 0x200>; @@ -849,12 +804,6 @@ reg = <0x30b10200 0x200>; }; - usbmisc2: usbmisc@30b20200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b20200 0x200>; - }; - usbmisc3: usbmisc@30b30200 { #index-cells = <1>; compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; @@ -867,12 +816,6 @@ clock-names = "main_clk"; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - }; - usbphynop3: usbphynop3 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; @@ -932,24 +875,6 @@ fsl,num-rx-queues=<3>; status = "disabled"; }; - - fec2: ethernet@30bf0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30bf0000 0x10000>; - interrupts = , - , - ; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET2_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - status = "disabled"; - }; }; }; }; -- 2.8.3