From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yixun Lan Subject: [PATCH v2 2/5] i2c: meson: add configurable divider factors Date: Mon, 20 Nov 2017 22:54:12 +0800 Message-ID: <20171120145415.6581-3-yixun.lan@amlogic.com> References: <20171120145415.6581-1-yixun.lan@amlogic.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20171120145415.6581-1-yixun.lan@amlogic.com> Sender: linux-kernel-owner@vger.kernel.org To: Wolfram Sang , Rob Herring , Mark Rutland , linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, Kevin Hilman Cc: Neil Armstrong , Jerome Brunet , Carlo Caione , Yixun Lan , Jian Hu , linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org From: Jian Hu This patch try to add support for I2C controller in Meson-AXG SoC, Due to the IP changes between I2C controller, we need to introduce a compatible data to make the divider factor configurable. Reviewed-by: Neil Armstrong Signed-off-by: Jian Hu Signed-off-by: Yixun Lan --- drivers/i2c/busses/i2c-meson.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index 88d15b92ec35..37c4aa76f37a 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -57,6 +58,10 @@ enum { STATE_WRITE, }; +struct meson_i2c_data { + unsigned char div_factor; +}; + /** * struct meson_i2c - Meson I2C device private data * @@ -93,6 +98,8 @@ struct meson_i2c { struct completion done; u32 tokens[2]; int num_tokens; + + const struct meson_i2c_data *data; }; static void meson_i2c_set_mask(struct meson_i2c *i2c, int reg, u32 mask, @@ -128,7 +135,7 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq) unsigned long clk_rate = clk_get_rate(i2c->clk); unsigned int div; - div = DIV_ROUND_UP(clk_rate, freq * 4); + div = DIV_ROUND_UP(clk_rate, freq * i2c->data->div_factor); /* clock divider has 12 bits */ if (div >= (1 << 12)) { @@ -376,6 +383,9 @@ static int meson_i2c_probe(struct platform_device *pdev) spin_lock_init(&i2c->lock); init_completion(&i2c->done); + i2c->data = (const struct meson_i2c_data *) + of_device_get_match_data(&pdev->dev); + i2c->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(i2c->clk)) { dev_err(&pdev->dev, "can't get device clock\n"); @@ -440,11 +450,25 @@ static int meson_i2c_remove(struct platform_device *pdev) return 0; } +static const struct meson_i2c_data i2c_meson6_data = { + .div_factor = 4, +}; + +static const struct meson_i2c_data i2c_gxbb_data = { + .div_factor = 4, +}; + +static const struct meson_i2c_data i2c_axg_data = { + .div_factor = 3, +}; + static const struct of_device_id meson_i2c_match[] = { - { .compatible = "amlogic,meson6-i2c" }, - { .compatible = "amlogic,meson-gxbb-i2c" }, - { }, + { .compatible = "amlogic,meson6-i2c", .data = &i2c_meson6_data }, + { .compatible = "amlogic,meson-gxbb-i2c", .data = &i2c_gxbb_data }, + { .compatible = "amlogic,meson-axg-i2c", .data = &i2c_axg_data }, + {}, }; + MODULE_DEVICE_TABLE(of, meson_i2c_match); static struct platform_driver meson_i2c_driver = { -- 2.15.0