[PATCH V6 00/12] add clock driver for Spreadtrum platforms

[PATCH V6 00/12] add clock driver for Spreadtrum platforms

[Chunyan Zhang]

From: Chunyan Zhang <zhang.chunyan@linaro.org>

This series adds Spreadtrum clock support together with its binding
documentation and devicetree data.

This patchset also added a few common clock mactos into drivers/clk/clk_common.h,
which are generally useful for all vendors' clock driver, sunxi-ng, zte, sprd
(added in this patchse) use them (or part of them) at present, once this patchset
is merged, I can help to remove the duplicated code which is under the vendors'
respective directories.

Thanks,
Chunyan

Changes from V5: (https://lkml.org/lkml/2017/11/20/21)
* Rebased the whole patch-set to 4.15-rc1;
* Fixed kbuild-test warnings;
* Switched to use devm_clk_hw_register() instead of clk_hw_register();
* Removed useless debug information from sc9860-clk.c.
  
Changes from V4: (https://lkml.org/lkml/2017/11/10/30)
* Added acked-by of Rob Herring;
* Removed spin lock from Spreadtrum's gate, mux, div drivers, since we have
  switched to use regmap.

Changes from V3: (https://lkml.org/lkml/2017/11/2/61)
* Addressed comments from Julien Thierry:
  - Clean the if branch of sprd_mux_helper_get_parent()
  - Have the Gate clock macros and ops for both mode (i.e. sc_gate and gate) separate;
  - Have the Mux clock macros with/without table separate, and same changes
    for the composite clock.
* Switched the function name from _endisable to _toggle;
* Fixed Kbuild test error:
  - Added exporting sprd_clk_regmap_init() which would be used in other module(s);
* Change the function sprd_clk_set_regmap() to the static one, and removed the
  declear from the include file;
* Addressed comments from Rob:
  - Separate the dt-binding include file from the driver patch;
  - Documented more for the property "clocks"
* Changed the syscon device names;
* Changed the name of 'sprd_mux_internal' to 'sprd_mux_ssel'
  

Changes from V2: (http://lkml.iu.edu/hypermail/linux/kernel/1707.1/01504.html)
* Switch to use regmap to access registers;
* Splited all clocks into 16 separated nodes, for each belongs to a single address area; 
* Rearranged the order of clock declaration in sc9860-clk.c, sorted them upon the address area;
* Added syscon device tree nodes which will be quoted by the node of clocks which are in
  the same address area with the syscon device;
* Revised the binding documentation according to the dt modification. 

Changes from V1: (https://lkml.org/lkml/2017/6/17/356)
* Address Stephen's comments:
  - Switch to use platform device driver instead of the DT probing mechanism.
  - Move the common clock macro out from vendor directory, but need to remove those
    overlap code from other vendors (such as sunxi-ng) once this get merged.
  - Add support to be built as a module.
  - Add 'sprd_' prefix for all spin locks used in these drivers.
  - Mark input parameter of sprd_x with const.
  - Remove unreasonable dependencies to CONFIG_64BIT.
  - Add readl() after writing the same register.
  - Remove CLK_IS_BASIC which is no longer used.
  - Remove unnecessery CLK_IGNORE_UNUSED when defining a clock.
  - Change to expose all clock index.
  - Use clk_ instead of ccu.
  - Add Kconfig for sprd clocks.
  - Move the fixed clocks out from the soc node.
  - Switch to use 64-bit math in pll driver instead of 32-bit math.
* Revise binding documentation according to dt modification.
* Rename sc9860.c to sc9860-clk.c


Chunyan Zhang (12):
  drivers: move clock common macros out from vendor directories
  clk: sprd: Add common infrastructure
  clk: sprd: add gate clock support
  clk: sprd: add mux clock support
  clk: sprd: add divider clock support
  clk: sprd: add composite clock support
  clk: sprd: add adjustable pll support
  dt-bindings: Add Spreadtrum clock binding documentation
  clk: sprd: Add dt-bindings include file for SC9860
  clk: sprd: add clocks support for SC9860
  arm64: dts: add syscon for whale2 platform
  arm64: dts: add clocks for SC9860

 Documentation/devicetree/bindings/clock/sprd.txt |   63 +
 arch/arm64/boot/dts/sprd/sc9860.dtsi             |  115 ++
 arch/arm64/boot/dts/sprd/whale2.dtsi             |   48 +-
 drivers/clk/Kconfig                              |    1 +
 drivers/clk/Makefile                             |    1 +
 drivers/clk/clk_common.h                         |   60 +
 drivers/clk/sprd/Kconfig                         |   14 +
 drivers/clk/sprd/Makefile                        |   11 +
 drivers/clk/sprd/common.c                        |   99 ++
 drivers/clk/sprd/common.h                        |   52 +
 drivers/clk/sprd/composite.c                     |   62 +
 drivers/clk/sprd/composite.h                     |   53 +
 drivers/clk/sprd/div.c                           |   92 +
 drivers/clk/sprd/div.h                           |   77 +
 drivers/clk/sprd/gate.c                          |  113 ++
 drivers/clk/sprd/gate.h                          |   61 +
 drivers/clk/sprd/mux.c                           |   78 +
 drivers/clk/sprd/mux.h                           |   76 +
 drivers/clk/sprd/pll.c                           |  268 +++
 drivers/clk/sprd/pll.h                           |  110 ++
 drivers/clk/sprd/sc9860-clk.c                    | 1981 ++++++++++++++++++++++
 include/dt-bindings/clock/sprd,sc9860-clk.h      |  408 +++++
 22 files changed, 3841 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
 create mode 100644 drivers/clk/clk_common.h
 create mode 100644 drivers/clk/sprd/Kconfig
 create mode 100644 drivers/clk/sprd/Makefile
 create mode 100644 drivers/clk/sprd/common.c
 create mode 100644 drivers/clk/sprd/common.h
 create mode 100644 drivers/clk/sprd/composite.c
 create mode 100644 drivers/clk/sprd/composite.h
 create mode 100644 drivers/clk/sprd/div.c
 create mode 100644 drivers/clk/sprd/div.h
 create mode 100644 drivers/clk/sprd/gate.c
 create mode 100644 drivers/clk/sprd/gate.h
 create mode 100644 drivers/clk/sprd/mux.c
 create mode 100644 drivers/clk/sprd/mux.h
 create mode 100644 drivers/clk/sprd/pll.c
 create mode 100644 drivers/clk/sprd/pll.h
 create mode 100644 drivers/clk/sprd/sc9860-clk.c
 create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h

-- 
2.7.4

[PATCH V6 01/12] drivers: move clock common macros out from vendor directories

[Chunyan Zhang]

These macros are used by more than one SoC vendor platforms, avoid to
have many copies of these code, this patch moves them to the common
clock directory which every clock drivers can access to.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/clk_common.h | 60 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 drivers/clk/clk_common.h

diff --git a/drivers/clk/clk_common.h b/drivers/clk/clk_common.h
new file mode 100644
index 0000000..21e93d2
--- /dev/null
+++ b/drivers/clk/clk_common.h
@@ -0,0 +1,60 @@
+/*
+ * drivers/clk/clk_common.h
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _CLK_COMMON_H_
+#define _CLK_COMMON_H_
+
+#include <linux/clk-provider.h>
+
+#define CLK_HW_INIT(_name, _parent, _ops, _flags)		\
+	(&(struct clk_init_data) {				\
+		.flags		= _flags,			\
+		.name		= _name,			\
+		.parent_names	= (const char *[]) { _parent },	\
+		.num_parents	= 1,				\
+		.ops		= _ops,				\
+	})
+
+#define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags)	\
+	(&(struct clk_init_data) {				\
+		.flags		= _flags,			\
+		.name		= _name,			\
+		.parent_names	= _parents,			\
+		.num_parents	= ARRAY_SIZE(_parents),		\
+		.ops		= _ops,				\
+	})
+
+#define CLK_HW_INIT_NO_PARENT(_name, _ops, _flags)     \
+	(&(struct clk_init_data) {                      \
+		.flags          = _flags,               \
+		.name           = _name,                \
+		.parent_names   = NULL,                 \
+		.num_parents    = 0,                    \
+		.ops            = _ops,                 \
+	})
+
+#define CLK_FIXED_FACTOR(_struct, _name, _parent,			\
+			_div, _mult, _flags)				\
+	struct clk_fixed_factor _struct = {				\
+		.div		= _div,					\
+		.mult		= _mult,				\
+		.hw.init	= CLK_HW_INIT(_name,			\
+					      _parent,			\
+					      &clk_fixed_factor_ops,	\
+					      _flags),			\
+	}
+
+#define CLK_FIXED_RATE(_struct, _name, _flags,				\
+		       _fixed_rate, _fixed_accuracy)			\
+	struct clk_fixed_rate _struct = {				\
+		.fixed_rate	= _fixed_rate,				\
+		.fixed_accuracy	= _fixed_accuracy,			\
+		.hw.init	= CLK_HW_INIT_NO_PARENT(_name,		\
+					  &clk_fixed_rate_ops,		\
+							_flags),	\
+	}
+
+#endif /* _CLK_COMMON_H_ */
-- 
2.7.4

[PATCH V6 02/12] clk: sprd: Add common infrastructure

[Chunyan Zhang]

Added Spreadtrum's clock driver framework together with common
structures and interface functions.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/Kconfig       |  1 +
 drivers/clk/Makefile      |  1 +
 drivers/clk/sprd/Kconfig  |  4 ++
 drivers/clk/sprd/Makefile |  3 ++
 drivers/clk/sprd/common.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sprd/common.h | 52 +++++++++++++++++++++++++
 6 files changed, 160 insertions(+)
 create mode 100644 drivers/clk/sprd/Kconfig
 create mode 100644 drivers/clk/sprd/Makefile
 create mode 100644 drivers/clk/sprd/common.c
 create mode 100644 drivers/clk/sprd/common.h

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 1c4e1aa..ce1a32be 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -236,6 +236,7 @@ source "drivers/clk/mvebu/Kconfig"
 source "drivers/clk/qcom/Kconfig"
 source "drivers/clk/renesas/Kconfig"
 source "drivers/clk/samsung/Kconfig"
+source "drivers/clk/sprd/Kconfig"
 source "drivers/clk/sunxi-ng/Kconfig"
 source "drivers/clk/tegra/Kconfig"
 source "drivers/clk/ti/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f7f761b..d880d13 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)		+= spear/
+obj-$(CONFIG_ARCH_SPRD)			+= sprd/
 obj-$(CONFIG_ARCH_STI)			+= st/
 obj-$(CONFIG_ARCH_SUNXI)		+= sunxi/
 obj-$(CONFIG_ARCH_SUNXI)		+= sunxi-ng/
diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig
new file mode 100644
index 0000000..67a3287
--- /dev/null
+++ b/drivers/clk/sprd/Kconfig
@@ -0,0 +1,4 @@
+config SPRD_COMMON_CLK
+	tristate "Clock support for Spreadtrum SoCs"
+	depends on ARCH_SPRD || COMPILE_TEST
+	default ARCH_SPRD
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
new file mode 100644
index 0000000..74f4b80
--- /dev/null
+++ b/drivers/clk/sprd/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SPRD_COMMON_CLK)	+= clk-sprd.o
+
+clk-sprd-y	+= common.o
diff --git a/drivers/clk/sprd/common.c b/drivers/clk/sprd/common.c
new file mode 100644
index 0000000..4e38b74a
--- /dev/null
+++ b/drivers/clk/sprd/common.c
@@ -0,0 +1,99 @@
+/*
+ * Spreadtrum clock infrastructure
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+#include "common.h"
+
+static const struct regmap_config sprdclk_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0xffff,
+	.fast_io	= true,
+};
+
+static void sprd_clk_set_regmap(const struct sprd_clk_desc *desc,
+			 struct regmap *regmap)
+{
+	int i;
+	struct sprd_clk_common *cclk;
+
+	for (i = 0; i < desc->num_clk_clks; i++) {
+		cclk = desc->clk_clks[i];
+		if (!cclk)
+			continue;
+
+		cclk->regmap = regmap;
+	}
+}
+
+int sprd_clk_regmap_init(struct platform_device *pdev,
+			 const struct sprd_clk_desc *desc)
+{
+	void __iomem *base;
+	struct device_node *node = pdev->dev.of_node;
+	struct regmap *regmap = NULL;
+
+	if (of_find_property(node, "sprd,syscon", NULL)) {
+		regmap = syscon_regmap_lookup_by_phandle(node, "sprd,syscon");
+		if (IS_ERR(regmap)) {
+			pr_err("%s: failed to get syscon regmap\n", __func__);
+			return PTR_ERR(regmap);
+		}
+	} else {
+		base = of_iomap(node, 0);
+		regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					       &sprdclk_regmap_config);
+		if (IS_ERR(regmap)) {
+			pr_err("failed to init regmap.\n");
+			return PTR_ERR(regmap);
+		}
+	}
+
+	sprd_clk_set_regmap(desc, regmap);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sprd_clk_regmap_init);
+
+int sprd_clk_probe(struct device *dev, struct clk_hw_onecell_data *clkhw)
+{
+	int i, ret = 0;
+	struct clk_hw *hw;
+
+	for (i = 0; i < clkhw->num; i++) {
+
+		hw = clkhw->hws[i];
+
+		if (!hw)
+			continue;
+
+		ret = devm_clk_hw_register(dev, hw);
+		if (ret) {
+			dev_err(dev, "Couldn't register clock %d - %s\n",
+				i, hw->init->name);
+			return ret;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+				     clkhw);
+	if (ret)
+		dev_err(dev, "Failed to add clock provider.\n");
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sprd_clk_probe);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/sprd/common.h b/drivers/clk/sprd/common.h
new file mode 100644
index 0000000..8cd774e
--- /dev/null
+++ b/drivers/clk/sprd/common.h
@@ -0,0 +1,52 @@
+/*
+ * Spreadtrum clock infrastructure
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_CLK_COMMON_H_
+#define _SPRD_CLK_COMMON_H_
+
+#include <linux/clk-provider.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+#include "../clk_common.h"
+
+struct device_node;
+
+struct sprd_clk_common {
+	struct regmap	*regmap;
+	u32		reg;
+	struct clk_hw	hw;
+};
+
+struct sprd_clk_desc {
+	struct sprd_clk_common		**clk_clks;
+	unsigned long			num_clk_clks;
+	struct clk_hw_onecell_data      *hw_clks;
+};
+
+#define sprd_regmap_read(map, reg, val)				\
+({								\
+	(map) ? regmap_read((map), (reg), (val)) : (-EINVAL);	\
+})
+
+#define sprd_regmap_write(map, reg, val)			\
+({								\
+	(map) ? regmap_write((map), (reg), (val)) : (-EINVAL);	\
+})
+
+static inline struct sprd_clk_common *
+	hw_to_sprd_clk_common(const struct clk_hw *hw)
+{
+	return container_of(hw, struct sprd_clk_common, hw);
+}
+int sprd_clk_regmap_init(struct platform_device *pdev,
+			 const struct sprd_clk_desc *desc);
+int sprd_clk_probe(struct device *dev, struct clk_hw_onecell_data *clkhw);
+
+#endif /* _SPRD_CLK_COMMON_H_ */
-- 
2.7.4

[PATCH V6 03/12] clk: sprd: add gate clock support

[Chunyan Zhang]

Some clocks on the Spreadtrum's SoCs are just simple gates. Add
support for those clocks.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/sprd/Makefile |   1 +
 drivers/clk/sprd/gate.c   | 113 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sprd/gate.h   |  61 +++++++++++++++++++++++++
 3 files changed, 175 insertions(+)
 create mode 100644 drivers/clk/sprd/gate.c
 create mode 100644 drivers/clk/sprd/gate.h

diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 74f4b80..8cd5592 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_SPRD_COMMON_CLK)	+= clk-sprd.o
 
 clk-sprd-y	+= common.o
+clk-sprd-y	+= gate.o
diff --git a/drivers/clk/sprd/gate.c b/drivers/clk/sprd/gate.c
new file mode 100644
index 0000000..5dcc6a8
--- /dev/null
+++ b/drivers/clk/sprd/gate.c
@@ -0,0 +1,113 @@
+/*
+ * Spreadtrum gate clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "gate.h"
+
+static void clk_gate_toggle(const struct sprd_gate *sg, bool en)
+{
+	const struct sprd_clk_common *common = &sg->common;
+	unsigned int reg;
+	bool set = sg->flags & CLK_GATE_SET_TO_DISABLE ? true : false;
+
+	set ^= en;
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+
+	if (set)
+		reg |= sg->enable_mask;
+	else
+		reg &= ~sg->enable_mask;
+
+	sprd_regmap_write(common->regmap, common->reg, reg);
+}
+
+static void clk_sc_gate_toggle(const struct sprd_gate *sg, bool en)
+{
+	const struct sprd_clk_common *common = &sg->common;
+	bool set = sg->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
+	unsigned int offset;
+
+	set ^= en;
+
+	/*
+	 * Each set/clear gate clock has three registers:
+	 * common->reg			- base register
+	 * common->reg + offset		- set register
+	 * common->reg + 2 * offset	- clear register
+	 */
+	offset = set ? sg->sc_offset : sg->sc_offset * 2;
+
+	sprd_regmap_write(common->regmap, common->reg + offset,
+			  sg->enable_mask);
+}
+
+static void sprd_gate_disable(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+
+	clk_gate_toggle(sg, false);
+}
+
+static int sprd_gate_enable(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+
+	clk_gate_toggle(sg, true);
+
+	return 0;
+}
+
+static void sprd_sc_gate_disable(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+
+	clk_sc_gate_toggle(sg, false);
+}
+
+static int sprd_sc_gate_enable(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+
+	clk_sc_gate_toggle(sg, true);
+
+	return 0;
+}
+static int sprd_gate_is_enabled(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+	struct sprd_clk_common *common = &sg->common;
+	unsigned int reg;
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+
+	if (sg->flags & CLK_GATE_SET_TO_DISABLE)
+		reg ^= sg->enable_mask;
+
+	reg &= sg->enable_mask;
+
+	return reg ? 1 : 0;
+}
+
+const struct clk_ops sprd_gate_ops = {
+	.disable	= sprd_gate_disable,
+	.enable		= sprd_gate_enable,
+	.is_enabled	= sprd_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(sprd_gate_ops);
+
+const struct clk_ops sprd_sc_gate_ops = {
+	.disable	= sprd_sc_gate_disable,
+	.enable		= sprd_sc_gate_enable,
+	.is_enabled	= sprd_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(sprd_sc_gate_ops);
+
diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
new file mode 100644
index 0000000..72e5b1a5
--- /dev/null
+++ b/drivers/clk/sprd/gate.h
@@ -0,0 +1,61 @@
+/*
+ * Spreadtrum gate clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_GATE_H_
+#define _SPRD_GATE_H_
+
+#include "common.h"
+
+struct sprd_gate {
+	u32			enable_mask;
+	u16			flags;
+	u16			sc_offset;
+
+	struct sprd_clk_common	common;
+};
+
+#define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
+			     _enable_mask, _flags, _gate_flags, _ops)	\
+	struct sprd_gate _struct = {					\
+		.enable_mask	= _enable_mask,				\
+		.sc_offset	= _sc_offset,				\
+		.flags		= _gate_flags,				\
+		.common	= {						\
+			.regmap		= NULL,				\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      _ops,		\
+						      _flags),		\
+		}							\
+	}
+
+#define SPRD_GATE_CLK(_struct, _name, _parent, _reg,			\
+		      _enable_mask, _flags, _gate_flags)		\
+	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, 0,		\
+			     _enable_mask, _flags, _gate_flags,		\
+			     &sprd_gate_ops)
+
+#define SPRD_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
+			 _enable_mask, _flags, _gate_flags)		\
+	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
+			     _enable_mask, _flags, _gate_flags,		\
+			     &sprd_sc_gate_ops)
+
+static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
+{
+	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+	return container_of(common, struct sprd_gate, common);
+}
+
+extern const struct clk_ops sprd_gate_ops;
+extern const struct clk_ops sprd_sc_gate_ops;
+
+#endif /* _SPRD_GATE_H_ */
-- 
2.7.4

[PATCH V6 04/12] clk: sprd: add mux clock support

[Chunyan Zhang]

This patch adds clock multiplexor support for Spreadtrum platforms,
the mux clocks also can be found in sprd composite clocks, so
provides two helpers that can be reused later on.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/sprd/Makefile |  1 +
 drivers/clk/sprd/mux.c    | 78 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sprd/mux.h    | 76 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 155 insertions(+)
 create mode 100644 drivers/clk/sprd/mux.c
 create mode 100644 drivers/clk/sprd/mux.h

diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 8cd5592..cee36b5 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_SPRD_COMMON_CLK)	+= clk-sprd.o
 
 clk-sprd-y	+= common.o
 clk-sprd-y	+= gate.o
+clk-sprd-y	+= mux.o
diff --git a/drivers/clk/sprd/mux.c b/drivers/clk/sprd/mux.c
new file mode 100644
index 0000000..05ef9f0
--- /dev/null
+++ b/drivers/clk/sprd/mux.c
@@ -0,0 +1,78 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "mux.h"
+
+u8 sprd_mux_helper_get_parent(const struct sprd_clk_common *common,
+			      const struct sprd_mux_ssel *mux)
+{
+	unsigned int reg;
+	u8 parent;
+	int num_parents;
+	int i;
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+	parent = reg >> mux->shift;
+	parent &= (1 << mux->width) - 1;
+
+	if (!mux->table)
+		return parent;
+
+	num_parents = clk_hw_get_num_parents(&common->hw);
+
+	for (i = 0; i < num_parents - 1; i++)
+		if (parent >= mux->table[i] && parent < mux->table[i + 1])
+			return i;
+
+	return num_parents - 1;
+}
+EXPORT_SYMBOL_GPL(sprd_mux_helper_get_parent);
+
+static u8 sprd_mux_get_parent(struct clk_hw *hw)
+{
+	struct sprd_mux *cm = hw_to_sprd_mux(hw);
+
+	return sprd_mux_helper_get_parent(&cm->common, &cm->mux);
+}
+
+int sprd_mux_helper_set_parent(const struct sprd_clk_common *common,
+			       const struct sprd_mux_ssel *mux,
+			       u8 index)
+{
+	unsigned int reg;
+
+	if (mux->table)
+		index = mux->table[index];
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+	reg &= ~GENMASK(mux->width + mux->shift - 1, mux->shift);
+	sprd_regmap_write(common->regmap, common->reg,
+			  reg | (index << mux->shift));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sprd_mux_helper_set_parent);
+
+static int sprd_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct sprd_mux *cm = hw_to_sprd_mux(hw);
+
+	return sprd_mux_helper_set_parent(&cm->common, &cm->mux, index);
+}
+
+const struct clk_ops sprd_mux_ops = {
+	.get_parent = sprd_mux_get_parent,
+	.set_parent = sprd_mux_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_mux_ops);
diff --git a/drivers/clk/sprd/mux.h b/drivers/clk/sprd/mux.h
new file mode 100644
index 0000000..683d63a
--- /dev/null
+++ b/drivers/clk/sprd/mux.h
@@ -0,0 +1,76 @@
+/*
+ * Spreadtrum multiplexer clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_MUX_H_
+#define _SPRD_MUX_H_
+
+#include "common.h"
+
+/**
+ * struct sprd_mux_ssel - Mux clock's source select bits in its register
+ * @shift: Bit offset of the divider in its register
+ * @width: Width of the divider field in its register
+ * @table: For some mux clocks, not all sources are used on some special
+ *	   chips, this matches the value of mux clock's register and the
+ *	   sources which are used for this mux clock
+ */
+struct sprd_mux_ssel {
+	u8		shift;
+	u8		width;
+	const u8	*table;
+};
+
+struct sprd_mux {
+	struct sprd_mux_ssel mux;
+	struct sprd_clk_common	common;
+};
+
+#define _SPRD_MUX_CLK(_shift, _width, _table)		\
+	{						\
+		.shift	= _shift,			\
+		.width	= _width,			\
+		.table	= _table,			\
+	}
+
+#define SPRD_MUX_CLK_TABLE(_struct, _name, _parents, _table,		\
+				     _reg, _shift, _width,		\
+				     _flags)				\
+	struct sprd_mux _struct = {					\
+		.mux	= _SPRD_MUX_CLK(_shift, _width, _table),	\
+		.common	= {						\
+			.regmap		= NULL,				\
+			.reg		= _reg,				\
+			.hw.init = CLK_HW_INIT_PARENTS(_name,		\
+						       _parents,	\
+						       &sprd_mux_ops,	\
+						       _flags),		\
+		}							\
+	}
+
+#define SPRD_MUX_CLK(_struct, _name, _parents, _reg,		\
+		     _shift, _width, _flags)			\
+	SPRD_MUX_CLK_TABLE(_struct, _name, _parents, NULL,	\
+			   _reg, _shift, _width, _flags)
+
+static inline struct sprd_mux *hw_to_sprd_mux(const struct clk_hw *hw)
+{
+	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+	return container_of(common, struct sprd_mux, common);
+}
+
+extern const struct clk_ops sprd_mux_ops;
+
+u8 sprd_mux_helper_get_parent(const struct sprd_clk_common *common,
+			      const struct sprd_mux_ssel *mux);
+int sprd_mux_helper_set_parent(const struct sprd_clk_common *common,
+			       const struct sprd_mux_ssel *mux,
+			       u8 index);
+
+#endif /* _SPRD_MUX_H_ */
-- 
2.7.4

[PATCH V6 05/12] clk: sprd: add divider clock support

[Chunyan Zhang]

This is a feature that can also be found in sprd composite clocks,
provide a bunch of helpers that can be reused later on.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/sprd/Makefile |  1 +
 drivers/clk/sprd/div.c    | 92 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sprd/div.h    | 77 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)
 create mode 100644 drivers/clk/sprd/div.c
 create mode 100644 drivers/clk/sprd/div.h

diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index cee36b5..80e6039 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_SPRD_COMMON_CLK)	+= clk-sprd.o
 clk-sprd-y	+= common.o
 clk-sprd-y	+= gate.o
 clk-sprd-y	+= mux.o
+clk-sprd-y	+= div.o
diff --git a/drivers/clk/sprd/div.c b/drivers/clk/sprd/div.c
new file mode 100644
index 0000000..8c7196f
--- /dev/null
+++ b/drivers/clk/sprd/div.c
@@ -0,0 +1,92 @@
+/*
+ * Spreadtrum divider clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+
+#include "div.h"
+
+long sprd_div_helper_round_rate(struct sprd_clk_common *common,
+				const struct sprd_div_internal *div,
+				unsigned long rate,
+				unsigned long *parent_rate)
+{
+	return divider_round_rate(&common->hw, rate, parent_rate,
+				  NULL, div->width, 0);
+}
+EXPORT_SYMBOL_GPL(sprd_div_helper_round_rate);
+
+static long sprd_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate)
+{
+	struct sprd_div *cd = hw_to_sprd_div(hw);
+
+	return sprd_div_helper_round_rate(&cd->common, &cd->div,
+					  rate, parent_rate);
+}
+
+unsigned long sprd_div_helper_recalc_rate(struct sprd_clk_common *common,
+					  const struct sprd_div_internal *div,
+					  unsigned long parent_rate)
+{
+	unsigned long val;
+	unsigned int reg;
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+	val = reg >> div->shift;
+	val &= (1 << div->width) - 1;
+
+	return divider_recalc_rate(&common->hw, parent_rate, val, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(sprd_div_helper_recalc_rate);
+
+static unsigned long sprd_div_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct sprd_div *cd = hw_to_sprd_div(hw);
+
+	return sprd_div_helper_recalc_rate(&cd->common, &cd->div, parent_rate);
+}
+
+int sprd_div_helper_set_rate(const struct sprd_clk_common *common,
+			     const struct sprd_div_internal *div,
+			     unsigned long rate,
+			     unsigned long parent_rate)
+{
+	unsigned long val;
+	unsigned int reg;
+
+	val = divider_get_val(rate, parent_rate, NULL,
+			      div->width, 0);
+
+	sprd_regmap_read(common->regmap, common->reg, &reg);
+	reg &= ~GENMASK(div->width + div->shift - 1, div->shift);
+
+	sprd_regmap_write(common->regmap, common->reg,
+			  reg | (val << div->shift));
+
+	return 0;
+
+}
+EXPORT_SYMBOL_GPL(sprd_div_helper_set_rate);
+
+static int sprd_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct sprd_div *cd = hw_to_sprd_div(hw);
+
+	return sprd_div_helper_set_rate(&cd->common, &cd->div,
+					rate, parent_rate);
+}
+
+const struct clk_ops sprd_div_ops = {
+	.recalc_rate = sprd_div_recalc_rate,
+	.round_rate = sprd_div_round_rate,
+	.set_rate = sprd_div_set_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_div_ops);
diff --git a/drivers/clk/sprd/div.h b/drivers/clk/sprd/div.h
new file mode 100644
index 0000000..fb59fe5
--- /dev/null
+++ b/drivers/clk/sprd/div.h
@@ -0,0 +1,77 @@
+/*
+ * Spreadtrum divider clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_DIV_H_
+#define _SPRD_DIV_H_
+
+#include "common.h"
+
+/**
+ * struct sprd_div_internal - Internal divider description
+ * @shift: Bit offset of the divider in its register
+ * @width: Width of the divider field in its register
+ *
+ * That structure represents a single divider, and is meant to be
+ * embedded in other structures representing the various clock
+ * classes.
+ */
+struct sprd_div_internal {
+	u8	shift;
+	u8	width;
+};
+
+#define _SPRD_DIV_CLK(_shift, _width)	\
+	{				\
+		.shift	= _shift,	\
+		.width	= _width,	\
+	}
+
+struct sprd_div {
+	struct sprd_div_internal	div;
+	struct sprd_clk_common	common;
+};
+
+#define SPRD_DIV_CLK(_struct, _name, _parent, _reg,			\
+			_shift, _width, _flags)				\
+	struct sprd_div _struct = {					\
+		.div	= _SPRD_DIV_CLK(_shift, _width),		\
+		.common	= {						\
+			.regmap		= NULL,				\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &sprd_div_ops,	\
+						      _flags),		\
+		}							\
+	}
+
+static inline struct sprd_div *hw_to_sprd_div(const struct clk_hw *hw)
+{
+	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+	return container_of(common, struct sprd_div, common);
+}
+
+long sprd_div_helper_round_rate(struct sprd_clk_common *common,
+				const struct sprd_div_internal *div,
+				unsigned long rate,
+				unsigned long *parent_rate);
+
+unsigned long sprd_div_helper_recalc_rate(struct sprd_clk_common *common,
+					  const struct sprd_div_internal *div,
+					  unsigned long parent_rate);
+
+int sprd_div_helper_set_rate(const struct sprd_clk_common *common,
+			     const struct sprd_div_internal *div,
+			     unsigned long rate,
+			     unsigned long parent_rate);
+
+extern const struct clk_ops sprd_div_ops;
+
+#endif /* _SPRD_DIV_H_ */
-- 
2.7.4

[PATCH V6 06/12] clk: sprd: add composite clock support

[Chunyan Zhang]

This patch introduced composite driver for Spreadtrum's SoCs. The
functions of this composite clock simply consist of divider and
mux clocks.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/sprd/Makefile    |  1 +
 drivers/clk/sprd/composite.c | 62 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sprd/composite.h | 53 +++++++++++++++++++++++++++++++++++++
 3 files changed, 116 insertions(+)
 create mode 100644 drivers/clk/sprd/composite.c
 create mode 100644 drivers/clk/sprd/composite.h

diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 80e6039..2262e76 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -4,3 +4,4 @@ clk-sprd-y	+= common.o
 clk-sprd-y	+= gate.o
 clk-sprd-y	+= mux.o
 clk-sprd-y	+= div.o
+clk-sprd-y	+= composite.o
diff --git a/drivers/clk/sprd/composite.c b/drivers/clk/sprd/composite.c
new file mode 100644
index 0000000..218e17c
--- /dev/null
+++ b/drivers/clk/sprd/composite.c
@@ -0,0 +1,62 @@
+/*
+ * Spreadtrum composite clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+
+#include "composite.h"
+
+static long sprd_comp_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate)
+{
+	struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+	return sprd_div_helper_round_rate(&cc->common, &cc->div,
+					 rate, parent_rate);
+}
+
+static unsigned long sprd_comp_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+	return sprd_div_helper_recalc_rate(&cc->common, &cc->div, parent_rate);
+}
+
+static int sprd_comp_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+	return sprd_div_helper_set_rate(&cc->common, &cc->div,
+				       rate, parent_rate);
+}
+
+static u8 sprd_comp_get_parent(struct clk_hw *hw)
+{
+	struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+	return sprd_mux_helper_get_parent(&cc->common, &cc->mux);
+}
+
+static int sprd_comp_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct sprd_comp *cc = hw_to_sprd_comp(hw);
+
+	return sprd_mux_helper_set_parent(&cc->common, &cc->mux, index);
+}
+
+const struct clk_ops sprd_comp_ops = {
+	.get_parent	= sprd_comp_get_parent,
+	.set_parent	= sprd_comp_set_parent,
+
+	.round_rate	= sprd_comp_round_rate,
+	.recalc_rate	= sprd_comp_recalc_rate,
+	.set_rate	= sprd_comp_set_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_comp_ops);
diff --git a/drivers/clk/sprd/composite.h b/drivers/clk/sprd/composite.h
new file mode 100644
index 0000000..b337bda
--- /dev/null
+++ b/drivers/clk/sprd/composite.h
@@ -0,0 +1,53 @@
+/*
+ * Spreadtrum composite clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_COMPOSITE_H_
+#define _SPRD_COMPOSITE_H_
+
+#include "common.h"
+#include "mux.h"
+#include "div.h"
+
+struct sprd_comp {
+	struct sprd_mux_ssel	mux;
+	struct sprd_div_internal	div;
+	struct sprd_clk_common	common;
+};
+
+#define SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, _table,	\
+			_mshift, _mwidth, _dshift, _dwidth, _flags)	\
+	struct sprd_comp _struct = {					\
+		.mux	= _SPRD_MUX_CLK(_mshift, _mwidth, _table),	\
+		.div	= _SPRD_DIV_CLK(_dshift, _dwidth),		\
+		.common = {						\
+			.regmap		= NULL,				\
+			.reg		= _reg,				\
+			.hw.init = CLK_HW_INIT_PARENTS(_name,		\
+						       _parent,		\
+						       &sprd_comp_ops,	\
+						       _flags),		\
+			 }						\
+	}
+
+#define SPRD_COMP_CLK(_struct, _name, _parent, _reg, _mshift,	\
+			_mwidth, _dshift, _dwidth, _flags)	\
+	SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg,	\
+			    NULL, _mshift, _mwidth,		\
+			    _dshift, _dwidth, _flags)
+
+static inline struct sprd_comp *hw_to_sprd_comp(const struct clk_hw *hw)
+{
+	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+	return container_of(common, struct sprd_comp, common);
+}
+
+extern const struct clk_ops sprd_comp_ops;
+
+#endif /* _SPRD_COMPOSITE_H_ */
-- 
2.7.4

[PATCH V6 07/12] clk: sprd: add adjustable pll support

[Chunyan Zhang]

Introduced a common adjustable pll clock driver for Spreadtrum SoCs.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/sprd/Makefile |   1 +
 drivers/clk/sprd/pll.c    | 268 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sprd/pll.h    | 110 +++++++++++++++++++
 3 files changed, 379 insertions(+)
 create mode 100644 drivers/clk/sprd/pll.c
 create mode 100644 drivers/clk/sprd/pll.h

diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 2262e76..d693969 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -5,3 +5,4 @@ clk-sprd-y	+= gate.o
 clk-sprd-y	+= mux.o
 clk-sprd-y	+= div.o
 clk-sprd-y	+= composite.o
+clk-sprd-y	+= pll.o
diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c
new file mode 100644
index 0000000..1fd8d32
--- /dev/null
+++ b/drivers/clk/sprd/pll.c
@@ -0,0 +1,268 @@
+/*
+ * Spreadtrum pll clock driver
+ *
+ * Copyright (C) 2015~2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "pll.h"
+
+#define CLK_PLL_1M	1000000
+#define CLK_PLL_10M	(CLK_PLL_1M * 10)
+
+#define pindex(pll, member)		\
+	(pll->factors[member].shift / (8 * sizeof(pll->regs_num)))
+
+#define pshift(pll, member)		\
+	(pll->factors[member].shift % (8 * sizeof(pll->regs_num)))
+
+#define pwidth(pll, member)		\
+	pll->factors[member].width
+
+#define pmask(pll, member)					\
+	((pwidth(pll, member)) ?				\
+	GENMASK(pwidth(pll, member) + pshift(pll, member) - 1,	\
+	pshift(pll, member)) : 0)
+
+#define pinternal(pll, cfg, member)	\
+	(cfg[pindex(pll, member)] & pmask(pll, member))
+
+#define pinternal_val(pll, cfg, member)	\
+	(pinternal(pll, cfg, member) >> pshift(pll, member))
+
+static inline unsigned int
+sprd_pll_read(const struct sprd_pll *pll, u8 index)
+{
+	const struct sprd_clk_common *common = &pll->common;
+	unsigned int val = 0;
+
+	if (WARN_ON(index >= pll->regs_num))
+		return 0;
+
+	sprd_regmap_read(common->regmap, common->reg + index * 4, &val);
+
+	return val;
+}
+
+static inline void
+sprd_pll_write(const struct sprd_pll *pll, u8 index,
+				  u32 msk, u32 val)
+{
+	const struct sprd_clk_common *common = &pll->common;
+	unsigned int offset, reg;
+	int ret = 0;
+
+	if (WARN_ON(index >= pll->regs_num))
+		return;
+
+	offset = common->reg + index * 4;
+	ret = sprd_regmap_read(common->regmap, offset, &reg);
+	if (!ret)
+		sprd_regmap_write(common->regmap, offset, (reg & ~msk) | val);
+}
+
+static unsigned long pll_get_refin(const struct sprd_pll *pll)
+{
+	u32 shift, mask, index, refin_id = 3;
+	const unsigned long refin[4] = { 2, 4, 13, 26 };
+
+	if (pwidth(pll, PLL_REFIN)) {
+		index = pindex(pll, PLL_REFIN);
+		shift = pshift(pll, PLL_REFIN);
+		mask = pmask(pll, PLL_REFIN);
+		refin_id = (sprd_pll_read(pll, index) & mask) >> shift;
+		if (refin_id > 3)
+			refin_id = 3;
+	}
+
+	return refin[refin_id];
+}
+
+static u32 pll_get_ibias(u64 rate, const u64 *table)
+{
+	u32 i, num = table[0];
+
+	for (i = 1; i < num + 1; i++)
+		if (rate <= table[i])
+			break;
+
+	return (i == num + 1) ? num : i;
+}
+
+static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
+					   unsigned long parent_rate)
+{
+	u32 *cfg;
+	u32 i, mask, regs_num = pll->regs_num;
+	unsigned long rate, nint, kint = 0;
+	u64 refin;
+	u16 k1, k2;
+
+	cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return -ENOMEM;
+
+	for (i = 0; i < regs_num; i++)
+		cfg[i] = sprd_pll_read(pll, i);
+
+	refin = pll_get_refin(pll);
+
+	if (pinternal(pll, cfg, PLL_PREDIV))
+		refin = refin * 2;
+
+	if (pwidth(pll, PLL_POSTDIV) &&
+	    ((pll->fflag == 1 && pinternal(pll, cfg, PLL_POSTDIV)) ||
+	     (!pll->fflag && !pinternal(pll, cfg, PLL_POSTDIV))))
+		refin = refin / 2;
+
+	if (!pinternal(pll, cfg, PLL_DIV_S)) {
+		rate = refin * pinternal_val(pll, cfg, PLL_N) * CLK_PLL_10M;
+	} else {
+		nint = pinternal_val(pll, cfg, PLL_NINT);
+		if (pinternal(pll, cfg, PLL_SDM_EN))
+			kint = pinternal_val(pll, cfg, PLL_KINT);
+
+		mask = pmask(pll, PLL_KINT);
+
+		k1 = pll->k1;
+		k2 = pll->k2;
+		rate = DIV_ROUND_CLOSEST_ULL(refin * kint * k1,
+					 ((mask >> __ffs(mask)) + 1)) *
+					 k2 + refin * nint * CLK_PLL_1M;
+	}
+
+	return rate;
+}
+
+#define SPRD_PLL_WRITE_CHECK(pll, i, mask, val)		\
+	(((sprd_pll_read(pll, i) & mask) == val) ? 0 : (-EFAULT))
+
+static int _sprd_pll_set_rate(const struct sprd_pll *pll,
+			      unsigned long rate,
+			      unsigned long parent_rate)
+{
+	struct reg_cfg *cfg;
+	int ret = 0;
+	u32 mask, shift, width, ibias_val, index;
+	u32 regs_num = pll->regs_num, i = 0;
+	unsigned long kint, nint;
+	u64 tmp, refin, fvco = rate;
+
+	cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return -ENOMEM;
+
+	refin = pll_get_refin(pll);
+
+	mask = pmask(pll, PLL_PREDIV);
+	index = pindex(pll, PLL_PREDIV);
+	width = pwidth(pll, PLL_PREDIV);
+	if (width && (sprd_pll_read(pll, index) & mask))
+		refin = refin * 2;
+
+	mask = pmask(pll, PLL_POSTDIV);
+	index = pindex(pll, PLL_POSTDIV);
+	width = pwidth(pll, PLL_POSTDIV);
+	cfg[index].msk = mask;
+	if (width && ((pll->fflag == 1 && fvco <= pll->fvco) ||
+		      (pll->fflag == 0 && fvco > pll->fvco)))
+		cfg[index].val |= mask;
+
+	if (width && fvco <= pll->fvco)
+		fvco = fvco * 2;
+
+	mask = pmask(pll, PLL_DIV_S);
+	index = pindex(pll, PLL_DIV_S);
+	cfg[index].val |= mask;
+	cfg[index].msk |= mask;
+
+	mask = pmask(pll, PLL_SDM_EN);
+	index = pindex(pll, PLL_SDM_EN);
+	cfg[index].val |= mask;
+	cfg[index].msk |= mask;
+
+	nint = do_div(fvco, refin * CLK_PLL_1M);
+	mask = pmask(pll, PLL_NINT);
+	index = pindex(pll, PLL_NINT);
+	shift = pshift(pll, PLL_NINT);
+	cfg[index].val |= (nint << shift) & mask;
+	cfg[index].msk |= mask;
+
+	mask = pmask(pll, PLL_KINT);
+	index = pindex(pll, PLL_KINT);
+	width = pwidth(pll, PLL_KINT);
+	shift = pshift(pll, PLL_KINT);
+	tmp = fvco - refin * nint * CLK_PLL_1M;
+	tmp = do_div(tmp, 10000) * ((mask >> shift) + 1);
+	kint = DIV_ROUND_CLOSEST_ULL(tmp, refin * 100);
+	cfg[index].val |= (kint << shift) & mask;
+	cfg[index].msk |= mask;
+
+	ibias_val = pll_get_ibias(fvco, pll->itable);
+
+	mask = pmask(pll, PLL_IBIAS);
+	index = pindex(pll, PLL_IBIAS);
+	shift = pshift(pll, PLL_IBIAS);
+	cfg[index].val |= ibias_val << shift & mask;
+	cfg[index].msk |= mask;
+
+	for (i = 0; i < regs_num; i++) {
+		if (cfg[i].msk) {
+			sprd_pll_write(pll, i, cfg[i].msk, cfg[i].val);
+			ret |= SPRD_PLL_WRITE_CHECK(pll, i, cfg[i].msk,
+						   cfg[i].val);
+		}
+	}
+
+	if (!ret)
+		udelay(pll->udelay);
+
+	return ret;
+}
+
+static unsigned long sprd_pll_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+	return _sprd_pll_recalc_rate(pll, parent_rate);
+}
+
+static int sprd_pll_set_rate(struct clk_hw *hw,
+			     unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+	return _sprd_pll_set_rate(pll, rate, parent_rate);
+}
+
+static int sprd_pll_clk_prepare(struct clk_hw *hw)
+{
+	struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+	udelay(pll->udelay);
+
+	return 0;
+}
+
+static long sprd_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	return rate;
+}
+
+const struct clk_ops sprd_pll_ops = {
+	.prepare = sprd_pll_clk_prepare,
+	.recalc_rate = sprd_pll_recalc_rate,
+	.round_rate = sprd_pll_round_rate,
+	.set_rate = sprd_pll_set_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_pll_ops);
diff --git a/drivers/clk/sprd/pll.h b/drivers/clk/sprd/pll.h
new file mode 100644
index 0000000..a25b003
--- /dev/null
+++ b/drivers/clk/sprd/pll.h
@@ -0,0 +1,110 @@
+/*
+ * Spreadtrum clock pll configurations
+ *
+ * Copyright (C) 2015~2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SPRD_PLL_H_
+#define _SPRD_PLL_H_
+
+#include "common.h"
+
+struct reg_cfg {
+	u32 val;
+	u32 msk;
+};
+
+struct clk_bit_field {
+	u8 shift;
+	u8 width;
+};
+
+enum {
+	PLL_LOCK_DONE,
+	PLL_DIV_S,
+	PLL_MOD_EN,
+	PLL_SDM_EN,
+	PLL_REFIN,
+	PLL_IBIAS,
+	PLL_N,
+	PLL_NINT,
+	PLL_KINT,
+	PLL_PREDIV,
+	PLL_POSTDIV,
+
+	PLL_FACT_MAX
+};
+
+/*
+ * struct sprd_pll - definition of adjustable pll clock
+ *
+ * @reg:	registers used to set the configuration of pll clock,
+ *		reg[0] shows how many registers this pll clock uses.
+ * @itable:	pll ibias table, itable[0] means how many items this
+ *		table includes
+ * @udelay	delay time after setting rate
+ * @factors	used to calculate the pll clock rate
+ * @fvco:	fvco threshold rate
+ * @fflag:	fvco flag
+ */
+struct sprd_pll {
+	u32 regs_num;
+	const u64 *itable;
+	const struct clk_bit_field *factors;
+	u16 udelay;
+	u16 k1;
+	u16 k2;
+	u16 fflag;
+	u64 fvco;
+
+	struct sprd_clk_common	common;
+};
+
+#define SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg,	\
+				    _regs_num, _itable, _factors,	\
+				    _udelay, _k1, _k2, _fflag, _fvco)	\
+	struct sprd_pll _struct = {					\
+		.regs_num	= _regs_num,				\
+		.itable		= _itable,				\
+		.factors	= _factors,				\
+		.udelay		= _udelay,				\
+		.k1		= _k1,					\
+		.k2		= _k2,					\
+		.fflag		= _fflag,				\
+		.fvco		= _fvco,				\
+		.common		= {					\
+			.regmap		= NULL,				\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &sprd_pll_ops,	\
+						      0),		\
+		},							\
+	}
+
+#define SPRD_PLL_WITH_ITABLE_K(_struct, _name, _parent, _reg,		\
+			       _regs_num, _itable, _factors,		\
+			       _udelay, _k1, _k2)			\
+	SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg,	\
+				    _regs_num, _itable, _factors,	\
+				    _udelay, _k1, _k2, 0, 0)
+
+#define SPRD_PLL_WITH_ITABLE_1K(_struct, _name, _parent, _reg,		\
+				_regs_num, _itable, _factors, _udelay)	\
+	SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg,	\
+				    _regs_num, _itable, _factors,	\
+				    _udelay, 1000, 1000, 0, 0)
+
+static inline struct sprd_pll *hw_to_sprd_pll(struct clk_hw *hw)
+{
+	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+	return container_of(common, struct sprd_pll, common);
+}
+
+extern const struct clk_ops sprd_pll_ops;
+
+#endif /* _SPRD_PLL_H_ */
-- 
2.7.4

[PATCH V6 08/12] dt-bindings: Add Spreadtrum clock binding documentation

[Chunyan Zhang]

Introduce a new binding with its documentation for Spreadtrum clock
sub-framework.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/sprd.txt | 63 ++++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt

diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd.txt
new file mode 100644
index 0000000..e9d179e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd.txt
@@ -0,0 +1,63 @@
+Spreadtrum Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+	- "sprd,sc9860-pmu-gate"
+	- "sprd,sc9860-pll"
+	- "sprd,sc9860-ap-clk"
+	- "sprd,sc9860-aon-prediv"
+	- "sprd,sc9860-apahb-gate"
+	- "sprd,sc9860-aon-gate"
+	- "sprd,sc9860-aonsecure-clk"
+	- "sprd,sc9860-agcp-gate"
+	- "sprd,sc9860-gpu-clk"
+	- "sprd,sc9860-vsp-clk"
+	- "sprd,sc9860-vsp-gate"
+	- "sprd,sc9860-cam-clk"
+	- "sprd,sc9860-cam-gate"
+	- "sprd,sc9860-disp-clk"
+	- "sprd,sc9860-disp-gate"
+	- "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+	   property here just simply shows which clock group the clocks'
+	   parents are in, since each clk node would represent many clocks
+	   which are defined in the driver.  The detailed dependency
+	   relationship (i.e. how many parents and which are the parents)
+	   are implemented in driver code.
+
+Optional properties:
+
+- reg:	Contain the registers base address and length. It must be configured
+	only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+	       the clock, and so we can get regmap for the clocks from the
+	       syscon device.
+
+Example:
+
+	pmu_gate: pmu-gate {
+		compatible = "sprd,sc9860-pmu-gate";
+		sprd,syscon = <&pmu_regs>;
+		clocks = <&ext_26m>;
+		#clock-cells = <1>;
+	};
+
+	pll: pll {
+		compatible = "sprd,sc9860-pll";
+		sprd,syscon = <&ana_regs>;
+		clocks = <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
+
+	ap_clk: clock-controller@20000000 {
+		compatible = "sprd,sc9860-ap-clk";
+		reg = <0 0x20000000 0 0x400>;
+		clocks = <&ext_26m>, <&pll 0>,
+			 <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
-- 
2.7.4

[PATCH V6 09/12] clk: sprd: Add dt-bindings include file for SC9860

[Chunyan Zhang]

This file defines all SC9860 clock indexes, it should be included in the
device tree in which there's device using the clocks.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/clock/sprd,sc9860-clk.h | 408 ++++++++++++++++++++++++++++
 1 file changed, 408 insertions(+)
 create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h

diff --git a/include/dt-bindings/clock/sprd,sc9860-clk.h b/include/dt-bindings/clock/sprd,sc9860-clk.h
new file mode 100644
index 0000000..48e6052
--- /dev/null
+++ b/include/dt-bindings/clock/sprd,sc9860-clk.h
@@ -0,0 +1,408 @@
+/*
+ * Spreadtrum SC9860 platform clocks
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef _DT_BINDINGS_CLK_SC9860_H_
+#define _DT_BINDINGS_CLK_SC9860_H_
+
+#define	CLK_EXT_RCO_100M	0
+#define	CLK_EXT_32K		1
+#define	CLK_FAC_4M		2
+#define	CLK_FAC_2M		3
+#define	CLK_FAC_1M		4
+#define	CLK_FAC_250K		5
+#define	CLK_FAC_RPLL0_26M	6
+#define	CLK_FAC_RPLL1_26M	7
+#define	CLK_FAC_RCO25M		8
+#define	CLK_FAC_RCO4M		9
+#define	CLK_FAC_RCO2M		10
+#define	CLK_FAC_3K2		11
+#define	CLK_FAC_1K		12
+#define	CLK_MPLL0_GATE		13
+#define	CLK_MPLL1_GATE		14
+#define	CLK_DPLL0_GATE		15
+#define	CLK_DPLL1_GATE		16
+#define	CLK_LTEPLL0_GATE	17
+#define	CLK_TWPLL_GATE		18
+#define	CLK_LTEPLL1_GATE	19
+#define	CLK_RPLL0_GATE		20
+#define	CLK_RPLL1_GATE		21
+#define	CLK_CPPLL_GATE		22
+#define	CLK_GPLL_GATE		23
+#define CLK_PMU_GATE_NUM	(CLK_GPLL_GATE + 1)
+
+#define	CLK_MPLL0		0
+#define	CLK_MPLL1		1
+#define	CLK_DPLL0		2
+#define	CLK_DPLL1		3
+#define	CLK_RPLL0		4
+#define	CLK_RPLL1		5
+#define	CLK_TWPLL		6
+#define	CLK_LTEPLL0		7
+#define	CLK_LTEPLL1		8
+#define	CLK_GPLL		9
+#define	CLK_CPPLL		10
+#define	CLK_GPLL_42M5		11
+#define	CLK_TWPLL_768M		12
+#define	CLK_TWPLL_384M		13
+#define	CLK_TWPLL_192M		14
+#define	CLK_TWPLL_96M		15
+#define	CLK_TWPLL_48M		16
+#define	CLK_TWPLL_24M		17
+#define	CLK_TWPLL_12M		18
+#define	CLK_TWPLL_512M		19
+#define	CLK_TWPLL_256M		20
+#define	CLK_TWPLL_128M		21
+#define	CLK_TWPLL_64M		22
+#define	CLK_TWPLL_307M2		23
+#define	CLK_TWPLL_153M6		24
+#define	CLK_TWPLL_76M8		25
+#define	CLK_TWPLL_51M2		26
+#define	CLK_TWPLL_38M4		27
+#define	CLK_TWPLL_19M2		28
+#define	CLK_L0_614M4		29
+#define	CLK_L0_409M6		30
+#define	CLK_L0_38M		31
+#define	CLK_L1_38M		32
+#define	CLK_RPLL0_192M		33
+#define	CLK_RPLL0_96M		34
+#define	CLK_RPLL0_48M		35
+#define	CLK_RPLL1_468M		36
+#define	CLK_RPLL1_192M		37
+#define	CLK_RPLL1_96M		38
+#define	CLK_RPLL1_64M		39
+#define	CLK_RPLL1_48M		40
+#define	CLK_DPLL0_50M		41
+#define	CLK_DPLL1_50M		42
+#define	CLK_CPPLL_50M		43
+#define	CLK_M0_39M		44
+#define	CLK_M1_63M		45
+#define CLK_PLL_NUM		(CLK_M1_63M + 1)
+
+
+#define	CLK_AP_APB		0
+#define	CLK_AP_USB3		1
+#define	CLK_UART0		2
+#define	CLK_UART1		3
+#define	CLK_UART2		4
+#define	CLK_UART3		5
+#define	CLK_UART4		6
+#define	CLK_I2C0		7
+#define	CLK_I2C1		8
+#define	CLK_I2C2		9
+#define	CLK_I2C3		10
+#define	CLK_I2C4		11
+#define	CLK_I2C5		12
+#define	CLK_SPI0		13
+#define	CLK_SPI1		14
+#define	CLK_SPI2		15
+#define	CLK_SPI3		16
+#define	CLK_IIS0		17
+#define	CLK_IIS1		18
+#define	CLK_IIS2		19
+#define	CLK_IIS3		20
+#define CLK_AP_CLK_NUM		(CLK_IIS3 + 1)
+
+#define	CLK_AON_APB		0
+#define	CLK_AUX0		1
+#define	CLK_AUX1		2
+#define	CLK_AUX2		3
+#define	CLK_PROBE		4
+#define	CLK_SP_AHB		5
+#define	CLK_CCI			6
+#define	CLK_GIC			7
+#define	CLK_CSSYS		8
+#define	CLK_SDIO0_2X		9
+#define	CLK_SDIO1_2X		10
+#define	CLK_SDIO2_2X		11
+#define	CLK_EMMC_2X		12
+#define	CLK_SDIO0_1X		13
+#define	CLK_SDIO1_1X		14
+#define	CLK_SDIO2_1X		15
+#define	CLK_EMMC_1X		16
+#define	CLK_ADI			17
+#define	CLK_PWM0		18
+#define	CLK_PWM1		19
+#define	CLK_PWM2		20
+#define	CLK_PWM3		21
+#define	CLK_EFUSE		22
+#define	CLK_CM3_UART0		23
+#define	CLK_CM3_UART1		24
+#define	CLK_THM			25
+#define	CLK_CM3_I2C0		26
+#define	CLK_CM3_I2C1		27
+#define	CLK_CM4_SPI		28
+#define	CLK_AON_I2C		29
+#define	CLK_AVS			30
+#define	CLK_CA53_DAP		31
+#define	CLK_CA53_TS		32
+#define	CLK_DJTAG_TCK		33
+#define	CLK_PMU			34
+#define	CLK_PMU_26M		35
+#define	CLK_DEBOUNCE		36
+#define	CLK_OTG2_REF		37
+#define	CLK_USB3_REF		38
+#define	CLK_AP_AXI		39
+#define CLK_AON_PREDIV_NUM	(CLK_AP_AXI + 1)
+
+#define	CLK_USB3_EB		0
+#define	CLK_USB3_SUSPEND_EB	1
+#define	CLK_USB3_REF_EB		2
+#define	CLK_DMA_EB		3
+#define	CLK_SDIO0_EB		4
+#define	CLK_SDIO1_EB		5
+#define	CLK_SDIO2_EB		6
+#define	CLK_EMMC_EB		7
+#define	CLK_ROM_EB		8
+#define	CLK_BUSMON_EB		9
+#define	CLK_CC63S_EB		10
+#define	CLK_CC63P_EB		11
+#define	CLK_CE0_EB		12
+#define	CLK_CE1_EB		13
+#define CLK_APAHB_GATE_NUM	(CLK_CE1_EB + 1)
+
+#define	CLK_AVS_LIT_EB		0
+#define	CLK_AVS_BIG_EB		1
+#define	CLK_AP_INTC5_EB		2
+#define	CLK_GPIO_EB		3
+#define	CLK_PWM0_EB		4
+#define	CLK_PWM1_EB		5
+#define	CLK_PWM2_EB		6
+#define	CLK_PWM3_EB		7
+#define	CLK_KPD_EB		8
+#define	CLK_AON_SYS_EB		9
+#define	CLK_AP_SYS_EB		10
+#define	CLK_AON_TMR_EB		11
+#define	CLK_AP_TMR0_EB		12
+#define	CLK_EFUSE_EB		13
+#define	CLK_EIC_EB		14
+#define	CLK_PUB1_REG_EB		15
+#define	CLK_ADI_EB		16
+#define	CLK_AP_INTC0_EB		17
+#define	CLK_AP_INTC1_EB		18
+#define	CLK_AP_INTC2_EB		19
+#define	CLK_AP_INTC3_EB		20
+#define	CLK_AP_INTC4_EB		21
+#define	CLK_SPLK_EB		22
+#define	CLK_MSPI_EB		23
+#define	CLK_PUB0_REG_EB		24
+#define	CLK_PIN_EB		25
+#define	CLK_AON_CKG_EB		26
+#define	CLK_GPU_EB		27
+#define	CLK_APCPU_TS0_EB	28
+#define	CLK_APCPU_TS1_EB	29
+#define	CLK_DAP_EB		30
+#define	CLK_I2C_EB		31
+#define	CLK_PMU_EB		32
+#define	CLK_THM_EB		33
+#define	CLK_AUX0_EB		34
+#define	CLK_AUX1_EB		35
+#define	CLK_AUX2_EB		36
+#define	CLK_PROBE_EB		37
+#define	CLK_GPU0_AVS_EB		38
+#define	CLK_GPU1_AVS_EB		39
+#define	CLK_APCPU_WDG_EB	40
+#define	CLK_AP_TMR1_EB		41
+#define	CLK_AP_TMR2_EB		42
+#define	CLK_DISP_EMC_EB		43
+#define	CLK_ZIP_EMC_EB		44
+#define	CLK_GSP_EMC_EB		45
+#define	CLK_OSC_AON_EB		46
+#define	CLK_LVDS_TRX_EB		47
+#define	CLK_LVDS_TCXO_EB	48
+#define	CLK_MDAR_EB		49
+#define	CLK_RTC4M0_CAL_EB	50
+#define	CLK_RCT100M_CAL_EB	51
+#define	CLK_DJTAG_EB		52
+#define	CLK_MBOX_EB		53
+#define	CLK_AON_DMA_EB		54
+#define	CLK_DBG_EMC_EB		55
+#define	CLK_LVDS_PLL_DIV_EN	56
+#define	CLK_DEF_EB		57
+#define	CLK_AON_APB_RSV0	58
+#define	CLK_ORP_JTAG_EB		59
+#define	CLK_VSP_EB		60
+#define	CLK_CAM_EB		61
+#define	CLK_DISP_EB		62
+#define	CLK_DBG_AXI_IF_EB	63
+#define	CLK_SDIO0_2X_EN		64
+#define	CLK_SDIO1_2X_EN		65
+#define	CLK_SDIO2_2X_EN		66
+#define	CLK_EMMC_2X_EN		67
+#define CLK_AON_GATE_NUM	(CLK_EMMC_2X_EN + 1)
+
+#define	CLK_LIT_MCU		0
+#define	CLK_BIG_MCU		1
+#define CLK_AONSECURE_NUM	(CLK_BIG_MCU + 1)
+
+#define	CLK_AGCP_IIS0_EB	0
+#define	CLK_AGCP_IIS1_EB	1
+#define	CLK_AGCP_IIS2_EB	2
+#define	CLK_AGCP_IIS3_EB	3
+#define	CLK_AGCP_UART_EB	4
+#define	CLK_AGCP_DMACP_EB	5
+#define	CLK_AGCP_DMAAP_EB	6
+#define	CLK_AGCP_ARC48K_EB	7
+#define	CLK_AGCP_SRC44P1K_EB	8
+#define	CLK_AGCP_MCDT_EB	9
+#define	CLK_AGCP_VBCIFD_EB	10
+#define	CLK_AGCP_VBC_EB		11
+#define	CLK_AGCP_SPINLOCK_EB	12
+#define	CLK_AGCP_ICU_EB		13
+#define	CLK_AGCP_AP_ASHB_EB	14
+#define	CLK_AGCP_CP_ASHB_EB	15
+#define	CLK_AGCP_AUD_EB		16
+#define	CLK_AGCP_AUDIF_EB	17
+#define CLK_AGCP_GATE_NUM	(CLK_AGCP_AUDIF_EB + 1)
+
+#define	CLK_GPU			0
+#define CLK_GPU_NUM		(CLK_GPU + 1)
+
+#define	CLK_AHB_VSP		0
+#define	CLK_VSP			1
+#define	CLK_VSP_ENC		2
+#define	CLK_VPP			3
+#define	CLK_VSP_26M		4
+#define CLK_VSP_NUM		(CLK_VSP_26M + 1)
+
+#define	CLK_VSP_DEC_EB		0
+#define	CLK_VSP_CKG_EB		1
+#define	CLK_VSP_MMU_EB		2
+#define	CLK_VSP_ENC_EB		3
+#define	CLK_VPP_EB		4
+#define	CLK_VSP_26M_EB		5
+#define	CLK_VSP_AXI_GATE	6
+#define	CLK_VSP_ENC_GATE	7
+#define	CLK_VPP_AXI_GATE	8
+#define	CLK_VSP_BM_GATE		9
+#define	CLK_VSP_ENC_BM_GATE	10
+#define	CLK_VPP_BM_GATE		11
+#define CLK_VSP_GATE_NUM	(CLK_VPP_BM_GATE + 1)
+
+#define	CLK_AHB_CAM		0
+#define	CLK_SENSOR0		1
+#define	CLK_SENSOR1		2
+#define	CLK_SENSOR2		3
+#define	CLK_MIPI_CSI0_EB	4
+#define	CLK_MIPI_CSI1_EB	5
+#define CLK_CAM_NUM		(CLK_MIPI_CSI1_EB + 1)
+
+#define	CLK_DCAM0_EB		0
+#define	CLK_DCAM1_EB		1
+#define	CLK_ISP0_EB		2
+#define	CLK_CSI0_EB		3
+#define	CLK_CSI1_EB		4
+#define	CLK_JPG0_EB		5
+#define	CLK_JPG1_EB		6
+#define	CLK_CAM_CKG_EB		7
+#define	CLK_CAM_MMU_EB		8
+#define	CLK_ISP1_EB		9
+#define	CLK_CPP_EB		10
+#define	CLK_MMU_PF_EB		11
+#define	CLK_ISP2_EB		12
+#define	CLK_DCAM2ISP_IF_EB	13
+#define	CLK_ISP2DCAM_IF_EB	14
+#define	CLK_ISP_LCLK_EB		15
+#define	CLK_ISP_ICLK_EB		16
+#define	CLK_ISP_MCLK_EB		17
+#define	CLK_ISP_PCLK_EB		18
+#define	CLK_ISP_ISP2DCAM_EB	19
+#define	CLK_DCAM0_IF_EB		20
+#define	CLK_CLK26M_IF_EB	21
+#define	CLK_CPHY0_GATE		22
+#define	CLK_MIPI_CSI0_GATE	23
+#define	CLK_CPHY1_GATE		24
+#define	CLK_MIPI_CSI1		25
+#define	CLK_DCAM0_AXI_GATE	26
+#define	CLK_DCAM1_AXI_GATE	27
+#define	CLK_SENSOR0_GATE	28
+#define	CLK_SENSOR1_GATE	29
+#define	CLK_JPG0_AXI_GATE	30
+#define	CLK_GPG1_AXI_GATE	31
+#define	CLK_ISP0_AXI_GATE	32
+#define	CLK_ISP1_AXI_GATE	33
+#define	CLK_ISP2_AXI_GATE	34
+#define	CLK_CPP_AXI_GATE	35
+#define	CLK_D0_IF_AXI_GATE	36
+#define	CLK_D2I_IF_AXI_GATE	37
+#define	CLK_I2D_IF_AXI_GATE	38
+#define	CLK_SPARE_AXI_GATE	39
+#define	CLK_SENSOR2_GATE	40
+#define	CLK_D0IF_IN_D_EN	41
+#define	CLK_D1IF_IN_D_EN	42
+#define	CLK_D0IF_IN_D2I_EN	43
+#define	CLK_D1IF_IN_D2I_EN	44
+#define	CLK_IA_IN_D2I_EN	45
+#define	CLK_IB_IN_D2I_EN	46
+#define	CLK_IC_IN_D2I_EN	47
+#define	CLK_IA_IN_I_EN		48
+#define	CLK_IB_IN_I_EN		49
+#define	CLK_IC_IN_I_EN		50
+#define CLK_CAM_GATE_NUM	(CLK_IC_IN_I_EN + 1)
+
+#define	CLK_AHB_DISP		0
+#define	CLK_DISPC0_DPI		1
+#define	CLK_DISPC1_DPI		2
+#define CLK_DISP_NUM		(CLK_DISPC1_DPI + 1)
+
+#define	CLK_DISPC0_EB		0
+#define	CLK_DISPC1_EB		1
+#define	CLK_DISPC_MMU_EB	2
+#define	CLK_GSP0_EB		3
+#define	CLK_GSP1_EB		4
+#define	CLK_GSP0_MMU_EB		5
+#define	CLK_GSP1_MMU_EB		6
+#define	CLK_DSI0_EB		7
+#define	CLK_DSI1_EB		8
+#define	CLK_DISP_CKG_EB		9
+#define	CLK_DISP_GPU_EB		10
+#define	CLK_GPU_MTX_EB		11
+#define	CLK_GSP_MTX_EB		12
+#define	CLK_TMC_MTX_EB		13
+#define	CLK_DISPC_MTX_EB	14
+#define	CLK_DPHY0_GATE		15
+#define	CLK_DPHY1_GATE		16
+#define	CLK_GSP0_A_GATE		17
+#define	CLK_GSP1_A_GATE		18
+#define	CLK_GSP0_F_GATE		19
+#define	CLK_GSP1_F_GATE		20
+#define	CLK_D_MTX_F_GATE	21
+#define	CLK_D_MTX_A_GATE	22
+#define	CLK_D_NOC_F_GATE	23
+#define	CLK_D_NOC_A_GATE	24
+#define	CLK_GSP_MTX_F_GATE	25
+#define	CLK_GSP_MTX_A_GATE	26
+#define	CLK_GSP_NOC_F_GATE	27
+#define	CLK_GSP_NOC_A_GATE	28
+#define	CLK_DISPM0IDLE_GATE	29
+#define	CLK_GSPM0IDLE_GATE	30
+#define CLK_DISP_GATE_NUM	(CLK_GSPM0IDLE_GATE + 1)
+
+#define	CLK_SIM0_EB		0
+#define	CLK_IIS0_EB		1
+#define	CLK_IIS1_EB		2
+#define	CLK_IIS2_EB		3
+#define	CLK_IIS3_EB		4
+#define	CLK_SPI0_EB		5
+#define	CLK_SPI1_EB		6
+#define	CLK_SPI2_EB		7
+#define	CLK_I2C0_EB		8
+#define	CLK_I2C1_EB		9
+#define	CLK_I2C2_EB		10
+#define	CLK_I2C3_EB		11
+#define	CLK_I2C4_EB		12
+#define	CLK_I2C5_EB		13
+#define	CLK_UART0_EB		14
+#define	CLK_UART1_EB		15
+#define	CLK_UART2_EB		16
+#define	CLK_UART3_EB		17
+#define	CLK_UART4_EB		18
+#define	CLK_AP_CKG_EB		19
+#define	CLK_SPI3_EB		20
+#define CLK_APAPB_GATE_NUM	(CLK_SPI3_EB + 1)
+
+#endif /* _DT_BINDINGS_CLK_SC9860_H_ */
-- 
2.7.4

[PATCH V6 10/12] clk: sprd: add clocks support for SC9860

[Chunyan Zhang]

This patch added the list of clocks for Spreadtrum's SC9860 SoC,
together with clock initialization code.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/clk/sprd/Kconfig      |   10 +
 drivers/clk/sprd/Makefile     |    3 +
 drivers/clk/sprd/sc9860-clk.c | 1981 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1994 insertions(+)
 create mode 100644 drivers/clk/sprd/sc9860-clk.c

diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig
index 67a3287..8789247 100644
--- a/drivers/clk/sprd/Kconfig
+++ b/drivers/clk/sprd/Kconfig
@@ -2,3 +2,13 @@ config SPRD_COMMON_CLK
 	tristate "Clock support for Spreadtrum SoCs"
 	depends on ARCH_SPRD || COMPILE_TEST
 	default ARCH_SPRD
+
+if SPRD_COMMON_CLK
+
+# SoC Drivers
+
+config SPRD_SC9860_CLK
+	tristate "Support for the Spreadtrum SC9860 clocks"
+	depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
+	default ARM64 && ARCH_SPRD
+endif
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index d693969..b0d81e5 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -6,3 +6,6 @@ clk-sprd-y	+= mux.o
 clk-sprd-y	+= div.o
 clk-sprd-y	+= composite.o
 clk-sprd-y	+= pll.o
+
+## SoC support
+obj-$(CONFIG_SPRD_SC9860_CLK)	+= sc9860-clk.o
diff --git a/drivers/clk/sprd/sc9860-clk.c b/drivers/clk/sprd/sc9860-clk.c
new file mode 100644
index 0000000..285d659
--- /dev/null
+++ b/drivers/clk/sprd/sc9860-clk.c
@@ -0,0 +1,1981 @@
+/*
+ * Spreatrum SC9860 clock driver
+ *
+ * Copyright (C) 2017 Spreadtrum, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+#include "common.h"
+#include "composite.h"
+#include "div.h"
+#include "gate.h"
+#include "mux.h"
+#include "pll.h"
+
+static CLK_FIXED_RATE(ext_rco_100m, "ext-rco-100m", 0, 100000000, 0);
+static CLK_FIXED_RATE(ext_32k, "ext-32k", 0, 32768, 0);
+
+static CLK_FIXED_FACTOR(fac_4m,		"fac-4m",	"ext-26m",
+			6, 1, 0);
+static CLK_FIXED_FACTOR(fac_2m,		"fac-2m",	"ext-26m",
+			13, 1, 0);
+static CLK_FIXED_FACTOR(fac_1m,		"fac-1m",	"ext-26m",
+			26, 1, 0);
+static CLK_FIXED_FACTOR(fac_250k,	"fac-250k",	"ext-26m",
+			104, 1, 0);
+static CLK_FIXED_FACTOR(fac_rpll0_26m,	"rpll0-26m",	"ext-26m",
+			1, 1, 0);
+static CLK_FIXED_FACTOR(fac_rpll1_26m,	"rpll1-26m",	"ext-26m",
+			1, 1, 0);
+static CLK_FIXED_FACTOR(fac_rco_25m,	"rco-25m",	"ext-rc0-100m",
+			4, 1, 0);
+static CLK_FIXED_FACTOR(fac_rco_4m,	"rco-4m",	"ext-rc0-100m",
+			25, 1, 0);
+static CLK_FIXED_FACTOR(fac_rco_2m,	"rco-2m",	"ext-rc0-100m",
+			50, 1, 0);
+static CLK_FIXED_FACTOR(fac_3k2,	"fac-3k2",	"ext-32k",
+			10, 1, 0);
+static CLK_FIXED_FACTOR(fac_1k,		"fac-1k",	"ext-32k",
+			32, 1, 0);
+
+static SPRD_SC_GATE_CLK(mpll0_gate,	"mpll0-gate",	"ext-26m", 0xb0,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mpll1_gate,	"mpll1-gate",	"ext-26m", 0xb0,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dpll0_gate,	"dpll0-gate",	"ext-26m", 0xb4,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dpll1_gate,	"dpll1-gate",	"ext-26m", 0xb4,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ltepll0_gate,	"ltepll0-gate",	"ext-26m", 0xb8,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(twpll_gate,	"twpll-gate",	"ext-26m", 0xbc,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ltepll1_gate,	"ltepll1-gate",	"ext-26m", 0x10c,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rpll0_gate,	"rpll0-gate",	"ext-26m", 0x16c,
+		     0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(rpll1_gate,	"rpll1-gate",	"ext-26m", 0x16c,
+		     0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(cppll_gate,	"cppll-gate",	"ext-26m", 0x2b4,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpll_gate,	"gpll-gate",	"ext-26m", 0x32c,
+		0x1000, BIT(0), CLK_IGNORE_UNUSED, CLK_GATE_SET_TO_DISABLE);
+
+static struct sprd_clk_common *sc9860_pmu_gate_clks[] = {
+	/* address base is 0x402b0000 */
+	&mpll0_gate.common,
+	&mpll1_gate.common,
+	&dpll0_gate.common,
+	&dpll1_gate.common,
+	&ltepll0_gate.common,
+	&twpll_gate.common,
+	&ltepll1_gate.common,
+	&rpll0_gate.common,
+	&rpll1_gate.common,
+	&cppll_gate.common,
+	&gpll_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9860_pmu_gate_hws = {
+	.hws	= {
+		[CLK_EXT_RCO_100M]	= &ext_rco_100m.hw,
+		[CLK_EXT_32K]		= &ext_32k.hw,
+		[CLK_FAC_4M]		= &fac_4m.hw,
+		[CLK_FAC_2M]		= &fac_2m.hw,
+		[CLK_FAC_1M]		= &fac_1m.hw,
+		[CLK_FAC_250K]		= &fac_250k.hw,
+		[CLK_FAC_RPLL0_26M]	= &fac_rpll0_26m.hw,
+		[CLK_FAC_RPLL1_26M]	= &fac_rpll1_26m.hw,
+		[CLK_FAC_RCO25M]	= &fac_rco_25m.hw,
+		[CLK_FAC_RCO4M]		= &fac_rco_4m.hw,
+		[CLK_FAC_RCO2M]		= &fac_rco_2m.hw,
+		[CLK_FAC_3K2]		= &fac_3k2.hw,
+		[CLK_FAC_1K]		= &fac_1k.hw,
+		[CLK_MPLL0_GATE]	= &mpll0_gate.common.hw,
+		[CLK_MPLL1_GATE]	= &mpll1_gate.common.hw,
+		[CLK_DPLL0_GATE]	= &dpll0_gate.common.hw,
+		[CLK_DPLL1_GATE]	= &dpll1_gate.common.hw,
+		[CLK_LTEPLL0_GATE]	= &ltepll0_gate.common.hw,
+		[CLK_TWPLL_GATE]	= &twpll_gate.common.hw,
+		[CLK_LTEPLL1_GATE]	= &ltepll1_gate.common.hw,
+		[CLK_RPLL0_GATE]	= &rpll0_gate.common.hw,
+		[CLK_RPLL1_GATE]	= &rpll1_gate.common.hw,
+		[CLK_CPPLL_GATE]	= &cppll_gate.common.hw,
+		[CLK_GPLL_GATE]		= &gpll_gate.common.hw,
+	},
+	.num	= CLK_PMU_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_pmu_gate_desc = {
+	.clk_clks	= sc9860_pmu_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_pmu_gate_clks),
+	.hw_clks        = &sc9860_pmu_gate_hws,
+};
+
+/* GPLL/LPLL/DPLL/RPLL/CPLL */
+static const u64 itable1[4] = {3, 780000000, 988000000, 1196000000};
+
+/* TWPLL/MPLL0/MPLL1 */
+static const u64 itable2[4] = {3, 1638000000, 2080000000, 2600000000UL};
+
+static const struct clk_bit_field f_mpll0[PLL_FACT_MAX] = {
+	{ .shift = 20,	.width = 1 },	/* lock_done	*/
+	{ .shift = 19,	.width = 1 },	/* div_s	*/
+	{ .shift = 18,	.width = 1 },	/* mod_en	*/
+	{ .shift = 17,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 11,	.width = 2 },	/* ibias	*/
+	{ .shift = 0,	.width = 7 },	/* n		*/
+	{ .shift = 57,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 56,	.width = 1 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_K_FVCO(mpll0_clk, "mpll0", "mpll0-gate", 0x24,
+				   2, itable2, f_mpll0, 200,
+				   1000, 1000, 1, 1300000000);
+
+static const struct clk_bit_field f_mpll1[PLL_FACT_MAX] = {
+	{ .shift = 20,	.width = 1 },	/* lock_done	*/
+	{ .shift = 19,	.width = 1 },	/* div_s	*/
+	{ .shift = 18,	.width = 1 },	/* mod_en	*/
+	{ .shift = 17,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 11,	.width = 2 },	/* ibias	*/
+	{ .shift = 0,	.width = 7 },	/* n		*/
+	{ .shift = 57,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 56,	.width = 1 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(mpll1_clk, "mpll1", "mpll1-gate", 0x2c,
+			       2, itable2, f_mpll1, 200);
+
+static const struct clk_bit_field f_dpll[PLL_FACT_MAX] = {
+	{ .shift = 16,	.width = 1 },	/* lock_done	*/
+	{ .shift = 15,	.width = 1 },	/* div_s	*/
+	{ .shift = 14,	.width = 1 },	/* mod_en	*/
+	{ .shift = 13,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 8,	.width = 2 },	/* ibias	*/
+	{ .shift = 0,	.width = 7 },	/* n		*/
+	{ .shift = 57,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(dpll0_clk, "dpll0", "dpll0-gate", 0x34,
+			       2, itable1, f_dpll, 200);
+
+static SPRD_PLL_WITH_ITABLE_1K(dpll1_clk, "dpll1", "dpll1-gate", 0x3c,
+			       2, itable1, f_dpll, 200);
+
+static const struct clk_bit_field f_rpll[PLL_FACT_MAX] = {
+	{ .shift = 0,	.width = 1 },	/* lock_done	*/
+	{ .shift = 3,	.width = 1 },	/* div_s	*/
+	{ .shift = 80,	.width = 1 },	/* mod_en	*/
+	{ .shift = 81,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 14,	.width = 2 },	/* ibias	*/
+	{ .shift = 16,	.width = 7 },	/* n		*/
+	{ .shift = 4,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(rpll0_clk, "rpll0", "rpll0-gate", 0x44,
+			       3, itable1, f_rpll, 200);
+
+static SPRD_PLL_WITH_ITABLE_1K(rpll1_clk, "rpll1", "rpll1-gate", 0x50,
+			       3, itable1, f_rpll, 200);
+
+static const struct clk_bit_field f_twpll[PLL_FACT_MAX] = {
+	{ .shift = 21,	.width = 1 },	/* lock_done	*/
+	{ .shift = 20,	.width = 1 },	/* div_s	*/
+	{ .shift = 19,	.width = 1 },	/* mod_en	*/
+	{ .shift = 18,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 13,	.width = 2 },	/* ibias	*/
+	{ .shift = 0,	.width = 7 },	/* n		*/
+	{ .shift = 57,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(twpll_clk, "twpll", "twpll-gate", 0x5c,
+			       2, itable2, f_twpll, 200);
+
+static const struct clk_bit_field f_ltepll[PLL_FACT_MAX] = {
+	{ .shift = 31,	.width = 1 },	/* lock_done	*/
+	{ .shift = 27,	.width = 1 },	/* div_s	*/
+	{ .shift = 26,	.width = 1 },	/* mod_en	*/
+	{ .shift = 25,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 20,	.width = 2 },	/* ibias	*/
+	{ .shift = 0,	.width = 7 },	/* n		*/
+	{ .shift = 57,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(ltepll0_clk, "ltepll0", "ltepll0-gate",
+			       0x64, 2, itable1,
+			       f_ltepll, 200);
+static SPRD_PLL_WITH_ITABLE_1K(ltepll1_clk, "ltepll1", "ltepll1-gate",
+			       0x6c, 2, itable1,
+			       f_ltepll, 200);
+
+static const struct clk_bit_field f_gpll[PLL_FACT_MAX] = {
+	{ .shift = 18,	.width = 1 },	/* lock_done	*/
+	{ .shift = 15,	.width = 1 },	/* div_s	*/
+	{ .shift = 14,	.width = 1 },	/* mod_en	*/
+	{ .shift = 13,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 8,	.width = 2 },	/* ibias	*/
+	{ .shift = 0,	.width = 7 },	/* n		*/
+	{ .shift = 57,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 17,	.width = 1 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_K_FVCO(gpll_clk, "gpll", "gpll-gate", 0x9c,
+				   2, itable1, f_gpll, 200,
+				   1000, 1000, 1, 600000000);
+
+static const struct clk_bit_field f_cppll[PLL_FACT_MAX] = {
+	{ .shift = 17,	.width = 1 },	/* lock_done	*/
+	{ .shift = 15,	.width = 1 },	/* div_s	*/
+	{ .shift = 14,	.width = 1 },	/* mod_en	*/
+	{ .shift = 13,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 8,	.width = 2 },	/* ibias	*/
+	{ .shift = 0,	.width = 7 },	/* n		*/
+	{ .shift = 57,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_WITH_ITABLE_1K(cppll_clk, "cppll", "cppll-gate", 0xc4,
+			       2, itable1, f_cppll, 200);
+
+static CLK_FIXED_FACTOR(gpll_42m5, "gpll-42m5", "gpll", 20, 1, 0);
+static CLK_FIXED_FACTOR(twpll_768m, "twpll-768m", "twpll", 2, 1, 0);
+static CLK_FIXED_FACTOR(twpll_384m, "twpll-384m", "twpll", 4, 1, 0);
+static CLK_FIXED_FACTOR(twpll_192m, "twpll-192m", "twpll", 8, 1, 0);
+static CLK_FIXED_FACTOR(twpll_96m, "twpll-96m", "twpll", 16, 1, 0);
+static CLK_FIXED_FACTOR(twpll_48m, "twpll-48m", "twpll", 32, 1, 0);
+static CLK_FIXED_FACTOR(twpll_24m, "twpll-24m", "twpll", 64, 1, 0);
+static CLK_FIXED_FACTOR(twpll_12m, "twpll-12m", "twpll", 128, 1, 0);
+static CLK_FIXED_FACTOR(twpll_512m, "twpll-512m", "twpll", 3, 1, 0);
+static CLK_FIXED_FACTOR(twpll_256m, "twpll-256m", "twpll", 6, 1, 0);
+static CLK_FIXED_FACTOR(twpll_128m, "twpll-128m", "twpll", 12, 1, 0);
+static CLK_FIXED_FACTOR(twpll_64m, "twpll-64m", "twpll", 24, 1, 0);
+static CLK_FIXED_FACTOR(twpll_307m2, "twpll-307m2", "twpll", 5, 1, 0);
+static CLK_FIXED_FACTOR(twpll_153m6, "twpll-153m6", "twpll", 10, 1, 0);
+static CLK_FIXED_FACTOR(twpll_76m8, "twpll-76m8", "twpll", 20, 1, 0);
+static CLK_FIXED_FACTOR(twpll_51m2, "twpll-51m2", "twpll", 30, 1, 0);
+static CLK_FIXED_FACTOR(twpll_38m4, "twpll-38m4", "twpll", 40, 1, 0);
+static CLK_FIXED_FACTOR(twpll_19m2, "twpll-19m2", "twpll", 80, 1, 0);
+static CLK_FIXED_FACTOR(l0_614m4, "l0-614m4", "ltepll0", 2, 1, 0);
+static CLK_FIXED_FACTOR(l0_409m6, "l0-409m6", "ltepll0", 3, 1, 0);
+static CLK_FIXED_FACTOR(l0_38m, "l0-38m", "ltepll0", 32, 1, 0);
+static CLK_FIXED_FACTOR(l1_38m, "l1-38m", "ltepll1", 32, 1, 0);
+static CLK_FIXED_FACTOR(rpll0_192m, "rpll0-192m", "rpll0", 6, 1, 0);
+static CLK_FIXED_FACTOR(rpll0_96m, "rpll0-96m", "rpll0", 12, 1, 0);
+static CLK_FIXED_FACTOR(rpll0_48m, "rpll0-48m", "rpll0", 24, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_468m, "rpll1-468m", "rpll1", 2, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_192m, "rpll1-192m", "rpll1", 6, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_96m, "rpll1-96m", "rpll1", 12, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_64m, "rpll1-64m", "rpll1", 18, 1, 0);
+static CLK_FIXED_FACTOR(rpll1_48m, "rpll1-48m", "rpll1", 24, 1, 0);
+static CLK_FIXED_FACTOR(dpll0_50m, "dpll0-50m", "dpll0", 16, 1, 0);
+static CLK_FIXED_FACTOR(dpll1_50m, "dpll1-50m", "dpll1", 16, 1, 0);
+static CLK_FIXED_FACTOR(cppll_50m, "cppll-50m", "cppll", 18, 1, 0);
+static CLK_FIXED_FACTOR(m0_39m, "m0-39m", "mpll0", 32, 1, 0);
+static CLK_FIXED_FACTOR(m1_63m, "m1-63m", "mpll1", 32, 1, 0);
+
+static struct sprd_clk_common *sc9860_pll_clks[] = {
+	/* address base is 0x40400000 */
+	&mpll0_clk.common,
+	&mpll1_clk.common,
+	&dpll0_clk.common,
+	&dpll1_clk.common,
+	&rpll0_clk.common,
+	&rpll1_clk.common,
+	&twpll_clk.common,
+	&ltepll0_clk.common,
+	&ltepll1_clk.common,
+	&gpll_clk.common,
+	&cppll_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9860_pll_hws = {
+	.hws	= {
+		[CLK_MPLL0]		= &mpll0_clk.common.hw,
+		[CLK_MPLL1]		= &mpll1_clk.common.hw,
+		[CLK_DPLL0]		= &dpll0_clk.common.hw,
+		[CLK_DPLL1]		= &dpll1_clk.common.hw,
+		[CLK_RPLL0]		= &rpll0_clk.common.hw,
+		[CLK_RPLL1]		= &rpll1_clk.common.hw,
+		[CLK_TWPLL]		= &twpll_clk.common.hw,
+		[CLK_LTEPLL0]		= &ltepll0_clk.common.hw,
+		[CLK_LTEPLL1]		= &ltepll1_clk.common.hw,
+		[CLK_GPLL]		= &gpll_clk.common.hw,
+		[CLK_CPPLL]		= &cppll_clk.common.hw,
+		[CLK_GPLL_42M5]		= &gpll_42m5.hw,
+		[CLK_TWPLL_768M]	= &twpll_768m.hw,
+		[CLK_TWPLL_384M]	= &twpll_384m.hw,
+		[CLK_TWPLL_192M]	= &twpll_192m.hw,
+		[CLK_TWPLL_96M]		= &twpll_96m.hw,
+		[CLK_TWPLL_48M]		= &twpll_48m.hw,
+		[CLK_TWPLL_24M]		= &twpll_24m.hw,
+		[CLK_TWPLL_12M]		= &twpll_12m.hw,
+		[CLK_TWPLL_512M]	= &twpll_512m.hw,
+		[CLK_TWPLL_256M]	= &twpll_256m.hw,
+		[CLK_TWPLL_128M]	= &twpll_128m.hw,
+		[CLK_TWPLL_64M]		= &twpll_64m.hw,
+		[CLK_TWPLL_307M2]	= &twpll_307m2.hw,
+		[CLK_TWPLL_153M6]	= &twpll_153m6.hw,
+		[CLK_TWPLL_76M8]	= &twpll_76m8.hw,
+		[CLK_TWPLL_51M2]	= &twpll_51m2.hw,
+		[CLK_TWPLL_38M4]	= &twpll_38m4.hw,
+		[CLK_TWPLL_19M2]	= &twpll_19m2.hw,
+		[CLK_L0_614M4]		= &l0_614m4.hw,
+		[CLK_L0_409M6]		= &l0_409m6.hw,
+		[CLK_L0_38M]		= &l0_38m.hw,
+		[CLK_L1_38M]		= &l1_38m.hw,
+		[CLK_RPLL0_192M]	= &rpll0_192m.hw,
+		[CLK_RPLL0_96M]		= &rpll0_96m.hw,
+		[CLK_RPLL0_48M]		= &rpll0_48m.hw,
+		[CLK_RPLL1_468M]	= &rpll1_468m.hw,
+		[CLK_RPLL1_192M]	= &rpll1_192m.hw,
+		[CLK_RPLL1_96M]		= &rpll1_96m.hw,
+		[CLK_RPLL1_64M]		= &rpll1_64m.hw,
+		[CLK_RPLL1_48M]		= &rpll1_48m.hw,
+		[CLK_DPLL0_50M]		= &dpll0_50m.hw,
+		[CLK_DPLL1_50M]		= &dpll1_50m.hw,
+		[CLK_CPPLL_50M]		= &cppll_50m.hw,
+		[CLK_M0_39M]		= &m0_39m.hw,
+		[CLK_M1_63M]		= &m1_63m.hw,
+	},
+	.num	= CLK_PLL_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_pll_desc = {
+	.clk_clks	= sc9860_pll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_pll_clks),
+	.hw_clks	= &sc9860_pll_hws,
+};
+
+#define SC9860_MUX_FLAG	\
+	(CLK_GET_RATE_NOCACHE | CLK_SET_RATE_NO_REPARENT)
+
+static const char * const ap_apb_parents[] = { "ext-26m", "twpll-64m",
+					       "twpll-96m", "twpll-128m" };
+static SPRD_MUX_CLK(ap_apb, "ap-apb", ap_apb_parents,
+		    0x20, 0, 1, SC9860_MUX_FLAG);
+
+static const char * const ap_apb_usb3[] = { "ext-32k", "twpll-24m" };
+static SPRD_MUX_CLK(ap_usb3, "ap-usb3", ap_apb_usb3,
+		    0x2c, 0, 1, SC9860_MUX_FLAG);
+
+static const char * const uart_parents[] = {	"ext-26m",	"twpll-48m",
+						"twpll-51m2",	"twpll-96m" };
+static SPRD_COMP_CLK(uart0_clk,	"uart0",	uart_parents, 0x30,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart1_clk,	"uart1",	uart_parents, 0x34,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart2_clk,	"uart2",	uart_parents, 0x38,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart3_clk,	"uart3",	uart_parents, 0x3c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(uart4_clk,	"uart4",	uart_parents, 0x40,
+		     0, 2, 8, 3, 0);
+
+static const char * const i2c_parents[] = { "ext-26m", "twpll-48m",
+					    "twpll-51m2", "twpll-153m6" };
+static SPRD_COMP_CLK(i2c0_clk,	"i2c0", i2c_parents, 0x44,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c1_clk,	"i2c1", i2c_parents, 0x48,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c2_clk,	"i2c2", i2c_parents, 0x4c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c3_clk,	"i2c3", i2c_parents, 0x50,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c4_clk,	"i2c4", i2c_parents, 0x54,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(i2c5_clk,	"i2c5", i2c_parents, 0x58,
+		     0, 2, 8, 3, 0);
+
+static const char * const spi_parents[] = {	"ext-26m",	"twpll-128m",
+						"twpll-153m6",	"twpll-192m" };
+static SPRD_COMP_CLK(spi0_clk,	"spi0",	spi_parents, 0x5c,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(spi1_clk,	"spi1",	spi_parents, 0x60,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(spi2_clk,	"spi2",	spi_parents, 0x64,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(spi3_clk,	"spi3",	spi_parents, 0x68,
+		     0, 2, 8, 3, 0);
+
+static const char * const iis_parents[] = { "ext-26m",
+					    "twpll-128m",
+					    "twpll-153m6" };
+static SPRD_COMP_CLK(iis0_clk,	"iis0",	iis_parents, 0x6c,
+		     0, 2, 8, 6, 0);
+static SPRD_COMP_CLK(iis1_clk,	"iis1",	iis_parents, 0x70,
+		     0, 2, 8, 6, 0);
+static SPRD_COMP_CLK(iis2_clk,	"iis2",	iis_parents, 0x74,
+		     0, 2, 8, 6, 0);
+static SPRD_COMP_CLK(iis3_clk,	"iis3",	iis_parents, 0x78,
+		     0, 2, 8, 6, 0);
+
+static struct sprd_clk_common *sc9860_ap_clks[] = {
+	/* address base is 0x20000000 */
+	&ap_apb.common,
+	&ap_usb3.common,
+	&uart0_clk.common,
+	&uart1_clk.common,
+	&uart2_clk.common,
+	&uart3_clk.common,
+	&uart4_clk.common,
+	&i2c0_clk.common,
+	&i2c1_clk.common,
+	&i2c2_clk.common,
+	&i2c3_clk.common,
+	&i2c4_clk.common,
+	&i2c5_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&spi3_clk.common,
+	&iis0_clk.common,
+	&iis1_clk.common,
+	&iis2_clk.common,
+	&iis3_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9860_ap_clk_hws = {
+	.hws	= {
+		[CLK_AP_APB]	= &ap_apb.common.hw,
+		[CLK_AP_USB3]	= &ap_usb3.common.hw,
+		[CLK_UART0]	= &uart0_clk.common.hw,
+		[CLK_UART1]	= &uart1_clk.common.hw,
+		[CLK_UART2]	= &uart2_clk.common.hw,
+		[CLK_UART3]	= &uart3_clk.common.hw,
+		[CLK_UART4]	= &uart4_clk.common.hw,
+		[CLK_I2C0]	= &i2c0_clk.common.hw,
+		[CLK_I2C1]	= &i2c1_clk.common.hw,
+		[CLK_I2C2]	= &i2c2_clk.common.hw,
+		[CLK_I2C3]	= &i2c3_clk.common.hw,
+		[CLK_I2C4]	= &i2c4_clk.common.hw,
+		[CLK_I2C5]	= &i2c5_clk.common.hw,
+		[CLK_SPI0]	= &spi0_clk.common.hw,
+		[CLK_SPI1]	= &spi1_clk.common.hw,
+		[CLK_SPI2]	= &spi2_clk.common.hw,
+		[CLK_SPI3]	= &spi3_clk.common.hw,
+		[CLK_IIS0]	= &iis0_clk.common.hw,
+		[CLK_IIS1]	= &iis1_clk.common.hw,
+		[CLK_IIS2]	= &iis2_clk.common.hw,
+		[CLK_IIS3]	= &iis3_clk.common.hw,
+	},
+	.num	= CLK_AP_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_ap_clk_desc = {
+	.clk_clks	= sc9860_ap_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_ap_clks),
+	.hw_clks	= &sc9860_ap_clk_hws,
+};
+
+static const char * const aon_apb_parents[] = { "rco-25m",	"ext-26m",
+						"ext-rco-100m",	"twpll-96m",
+						"twpll-128m",
+						"twpll-153m6" };
+static SPRD_COMP_CLK(aon_apb, "aon-apb", aon_apb_parents, 0x230,
+		     0, 3, 8, 2, 0);
+
+static const char * const aux_parents[] = { "ext-32k",		"rpll0-26m",
+					    "rpll1-26m",	"ext-26m",
+					    "cppll-50m",	"rco-25m",
+					    "dpll0-50m",	"dpll1-50m",
+					    "gpll-42m5",	"twpll-48m",
+					    "m0-39m",		"m1-63m",
+					    "l0-38m",		"l1-38m" };
+
+static SPRD_COMP_CLK(aux0_clk,	"aux0",		aux_parents, 0x238,
+		     0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(aux1_clk,	"aux1",		aux_parents, 0x23c,
+		     0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(aux2_clk,	"aux2",		aux_parents, 0x240,
+		     0, 5, 8, 4, 0);
+static SPRD_COMP_CLK(probe_clk,	"probe",	aux_parents, 0x244,
+		     0, 5, 8, 4, 0);
+
+static const char * const sp_ahb_parents[] = {	"rco-4m",	"ext-26m",
+						"ext-rco-100m",	"twpll-96m",
+						"twpll-128m",
+						"twpll-153m6" };
+static SPRD_COMP_CLK(sp_ahb,	"sp-ahb",	sp_ahb_parents, 0x2d0,
+		     0, 3, 8, 2, 0);
+
+static const char * const cci_parents[] = {	"ext-26m",	"twpll-384m",
+						"l0-614m4",	"twpll-768m" };
+static SPRD_COMP_CLK(cci_clk,	"cci",		cci_parents, 0x300,
+		     0, 2, 8, 2, 0);
+static SPRD_COMP_CLK(gic_clk,	"gic",		cci_parents, 0x304,
+		     0, 2, 8, 2, 0);
+static SPRD_COMP_CLK(cssys_clk,	"cssys",	cci_parents, 0x310,
+		     0, 2, 8, 2, 0);
+
+static const char * const sdio_2x_parents[] = {	"fac-1m",	"ext-26m",
+						"twpll-307m2",	"twpll-384m",
+						"l0-409m6" };
+static SPRD_COMP_CLK(sdio0_2x,	"sdio0-2x",	sdio_2x_parents, 0x328,
+		     0, 3, 8, 4, 0);
+static SPRD_COMP_CLK(sdio1_2x,	"sdio1-2x",	sdio_2x_parents, 0x330,
+		     0, 3, 8, 4, 0);
+static SPRD_COMP_CLK(sdio2_2x,	"sdio2-2x",	sdio_2x_parents, 0x338,
+		     0, 3, 8, 4, 0);
+static SPRD_COMP_CLK(emmc_2x,	"emmc-2x",	sdio_2x_parents, 0x340,
+		     0, 3, 8, 4, 0);
+
+static SPRD_DIV_CLK(sdio0_1x,	"sdio0-1x",	"sdio0-2x",	0x32c,
+		    8, 1, 0);
+static SPRD_DIV_CLK(sdio1_1x,	"sdio1-1x",	"sdio1-2x",	0x334,
+		    8, 1, 0);
+static SPRD_DIV_CLK(sdio2_1x,	"sdio2-1x",	"sdio2-2x",	0x33c,
+		    8, 1, 0);
+static SPRD_DIV_CLK(emmc_1x,	"emmc-1x",	"emmc-2x",	0x344,
+		    8, 1, 0);
+
+static const char * const adi_parents[] = {	"rco-4m",	"ext-26m",
+						"rco-25m",	"twpll-38m4",
+						"twpll-51m2" };
+static SPRD_MUX_CLK(adi_clk,	"adi",	adi_parents, 0x234,
+		    0, 3, SC9860_MUX_FLAG);
+
+static const char * const pwm_parents[] = {	"ext-32k",	"ext-26m",
+						"rco-4m",	"rco-25m",
+						"twpll-48m" };
+static SPRD_MUX_CLK(pwm0_clk,	"pwm0",	pwm_parents, 0x248,
+		    0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(pwm1_clk,	"pwm1",	pwm_parents, 0x24c,
+		    0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(pwm2_clk,	"pwm2",	pwm_parents, 0x250,
+		    0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(pwm3_clk,	"pwm3",	pwm_parents, 0x254,
+		    0, 3, SC9860_MUX_FLAG);
+
+static const char * const efuse_parents[] = { "rco-25m", "ext-26m" };
+static SPRD_MUX_CLK(efuse_clk, "efuse", efuse_parents, 0x258,
+		    0, 1, SC9860_MUX_FLAG);
+
+static const char * const cm3_uart_parents[] = { "rco-4m",	"ext-26m",
+						 "rco-100m",	"twpll-48m",
+						 "twpll-51m2",	"twpll-96m",
+						 "twpll-128m" };
+static SPRD_MUX_CLK(cm3_uart0, "cm3-uart0", cm3_uart_parents, 0x25c,
+		    0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(cm3_uart1, "cm3-uart1", cm3_uart_parents, 0x260,
+		    0, 3, SC9860_MUX_FLAG);
+
+static const char * const thm_parents[] = { "ext-32k", "fac-250k" };
+static SPRD_MUX_CLK(thm_clk,	"thm",	thm_parents, 0x270,
+		    0, 1, SC9860_MUX_FLAG);
+
+static const char * const cm3_i2c_parents[] = {	"rco-4m",
+						"ext-26m",
+						"rco-100m",
+						"twpll-48m",
+						"twpll-51m2",
+						"twpll-153m6" };
+static SPRD_MUX_CLK(cm3_i2c0, "cm3-i2c0", cm3_i2c_parents, 0x274,
+		    0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(cm3_i2c1, "cm3-i2c1", cm3_i2c_parents, 0x278,
+		    0, 3, SC9860_MUX_FLAG);
+static SPRD_MUX_CLK(aon_i2c, "aon-i2c",	cm3_i2c_parents, 0x280,
+		    0, 3, SC9860_MUX_FLAG);
+
+static const char * const cm4_spi_parents[] = {	"ext-26m",	"twpll-96m",
+						"rco-100m",	"twpll-128m",
+						"twpll-153m6",	"twpll-192m" };
+static SPRD_MUX_CLK(cm4_spi, "cm4-spi", cm4_spi_parents, 0x27c,
+		    0, 3, SC9860_MUX_FLAG);
+
+static SPRD_MUX_CLK(avs_clk, "avs", uart_parents, 0x284,
+		    0, 2, SC9860_MUX_FLAG);
+
+static const char * const ca53_dap_parents[] = { "ext-26m",	"rco-4m",
+						 "rco-100m",	"twpll-76m8",
+						 "twpll-128m",	"twpll-153m6" };
+static SPRD_MUX_CLK(ca53_dap, "ca53-dap", ca53_dap_parents, 0x288,
+		    0, 3, SC9860_MUX_FLAG);
+
+static const char * const ca53_ts_parents[] = {	"ext-32k", "ext-26m",
+						"clk-twpll-128m",
+						"clk-twpll-153m6" };
+static SPRD_MUX_CLK(ca53_ts, "ca53-ts", ca53_ts_parents, 0x290,
+		    0, 2, SC9860_MUX_FLAG);
+
+static const char * const djtag_tck_parents[] = { "rco-4m", "ext-26m" };
+static SPRD_MUX_CLK(djtag_tck, "djtag-tck", djtag_tck_parents, 0x2c8,
+		    0, 1, SC9860_MUX_FLAG);
+
+static const char * const pmu_parents[] = { "ext-32k", "rco-4m", "clk-4m" };
+static SPRD_MUX_CLK(pmu_clk, "pmu", pmu_parents, 0x2e0,
+		    0, 2, SC9860_MUX_FLAG);
+
+static const char * const pmu_26m_parents[] = { "rco-25m", "ext-26m" };
+static SPRD_MUX_CLK(pmu_26m, "pmu-26m", pmu_26m_parents, 0x2e4,
+		    0, 1, SC9860_MUX_FLAG);
+
+static const char * const debounce_parents[] = { "ext-32k", "rco-4m",
+						 "rco-25m", "ext-26m" };
+static SPRD_MUX_CLK(debounce_clk, "debounce", debounce_parents, 0x2e8,
+		    0, 2, SC9860_MUX_FLAG);
+
+static const char * const otg2_ref_parents[] = { "twpll-12m", "twpll-24m" };
+static SPRD_MUX_CLK(otg2_ref, "otg2-ref", otg2_ref_parents, 0x2f4,
+		    0, 1, SC9860_MUX_FLAG);
+
+static const char * const usb3_ref_parents[] = { "twpll-24m", "twpll-19m2",
+						 "twpll-48m" };
+static SPRD_MUX_CLK(usb3_ref, "usb3-ref", usb3_ref_parents, 0x2f8,
+		    0, 2, SC9860_MUX_FLAG);
+
+static const char * const ap_axi_parents[] = { "ext-26m", "twpll-76m8",
+					       "twpll-128m", "twpll-256m" };
+static SPRD_MUX_CLK(ap_axi, "ap-axi", ap_axi_parents, 0x324,
+		    0, 2, SC9860_MUX_FLAG);
+
+static struct sprd_clk_common *sc9860_aon_prediv[] = {
+	/* address base is 0x402d0000 */
+	&aon_apb.common,
+	&aux0_clk.common,
+	&aux1_clk.common,
+	&aux2_clk.common,
+	&probe_clk.common,
+	&sp_ahb.common,
+	&cci_clk.common,
+	&gic_clk.common,
+	&cssys_clk.common,
+	&sdio0_2x.common,
+	&sdio1_2x.common,
+	&sdio2_2x.common,
+	&emmc_2x.common,
+	&sdio0_1x.common,
+	&sdio1_1x.common,
+	&sdio2_1x.common,
+	&emmc_1x.common,
+	&adi_clk.common,
+	&pwm0_clk.common,
+	&pwm1_clk.common,
+	&pwm2_clk.common,
+	&pwm3_clk.common,
+	&efuse_clk.common,
+	&cm3_uart0.common,
+	&cm3_uart1.common,
+	&thm_clk.common,
+	&cm3_i2c0.common,
+	&cm3_i2c1.common,
+	&cm4_spi.common,
+	&aon_i2c.common,
+	&avs_clk.common,
+	&ca53_dap.common,
+	&ca53_ts.common,
+	&djtag_tck.common,
+	&pmu_clk.common,
+	&pmu_26m.common,
+	&debounce_clk.common,
+	&otg2_ref.common,
+	&usb3_ref.common,
+	&ap_axi.common,
+};
+
+static struct clk_hw_onecell_data sc9860_aon_prediv_hws = {
+	.hws	= {
+		[CLK_AON_APB]		= &aon_apb.common.hw,
+		[CLK_AUX0]		= &aux0_clk.common.hw,
+		[CLK_AUX1]		= &aux1_clk.common.hw,
+		[CLK_AUX2]		= &aux2_clk.common.hw,
+		[CLK_PROBE]		= &probe_clk.common.hw,
+		[CLK_SP_AHB]		= &sp_ahb.common.hw,
+		[CLK_CCI]		= &cci_clk.common.hw,
+		[CLK_GIC]		= &gic_clk.common.hw,
+		[CLK_CSSYS]		= &cssys_clk.common.hw,
+		[CLK_SDIO0_2X]		= &sdio0_2x.common.hw,
+		[CLK_SDIO1_2X]		= &sdio1_2x.common.hw,
+		[CLK_SDIO2_2X]		= &sdio2_2x.common.hw,
+		[CLK_EMMC_2X]		= &emmc_2x.common.hw,
+		[CLK_SDIO0_1X]		= &sdio0_1x.common.hw,
+		[CLK_SDIO1_1X]		= &sdio1_1x.common.hw,
+		[CLK_SDIO2_1X]		= &sdio2_1x.common.hw,
+		[CLK_EMMC_1X]		= &emmc_1x.common.hw,
+		[CLK_ADI]		= &adi_clk.common.hw,
+		[CLK_PWM0]		= &pwm0_clk.common.hw,
+		[CLK_PWM1]		= &pwm1_clk.common.hw,
+		[CLK_PWM2]		= &pwm2_clk.common.hw,
+		[CLK_PWM3]		= &pwm3_clk.common.hw,
+		[CLK_EFUSE]		= &efuse_clk.common.hw,
+		[CLK_CM3_UART0]		= &cm3_uart0.common.hw,
+		[CLK_CM3_UART1]		= &cm3_uart1.common.hw,
+		[CLK_THM]		= &thm_clk.common.hw,
+		[CLK_CM3_I2C0]		= &cm3_i2c0.common.hw,
+		[CLK_CM3_I2C1]		= &cm3_i2c1.common.hw,
+		[CLK_CM4_SPI]		= &cm4_spi.common.hw,
+		[CLK_AON_I2C]		= &aon_i2c.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_CA53_DAP]		= &ca53_dap.common.hw,
+		[CLK_CA53_TS]		= &ca53_ts.common.hw,
+		[CLK_DJTAG_TCK]		= &djtag_tck.common.hw,
+		[CLK_PMU]		= &pmu_clk.common.hw,
+		[CLK_PMU_26M]		= &pmu_26m.common.hw,
+		[CLK_DEBOUNCE]		= &debounce_clk.common.hw,
+		[CLK_OTG2_REF]		= &otg2_ref.common.hw,
+		[CLK_USB3_REF]		= &usb3_ref.common.hw,
+		[CLK_AP_AXI]		= &ap_axi.common.hw,
+	},
+	.num	= CLK_AON_PREDIV_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_aon_prediv_desc = {
+	.clk_clks	= sc9860_aon_prediv,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_aon_prediv),
+	.hw_clks	= &sc9860_aon_prediv_hws,
+};
+
+static SPRD_SC_GATE_CLK(usb3_eb,		"usb3-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(usb3_suspend,	"usb3-suspend", "ap-axi", 0x0,
+		     0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(usb3_ref_eb,	"usb3-ref-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dma_eb,		"dma-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio0_eb,		"sdio0-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio1_eb,		"sdio1-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio2_eb,		"sdio2-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(emmc_eb,		"emmc-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rom_eb,		"rom-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(busmon_eb,		"busmon-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cc63s_eb,		"cc63s-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cc63p_eb,		"cc63p-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ce0_eb,		"ce0-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ce1_eb,		"ce1-eb",	"ap-axi", 0x0,
+		     0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9860_apahb_gate[] = {
+	/* address base is 0x20210000 */
+	&usb3_eb.common,
+	&usb3_suspend.common,
+	&usb3_ref_eb.common,
+	&dma_eb.common,
+	&sdio0_eb.common,
+	&sdio1_eb.common,
+	&sdio2_eb.common,
+	&emmc_eb.common,
+	&rom_eb.common,
+	&busmon_eb.common,
+	&cc63s_eb.common,
+	&cc63p_eb.common,
+	&ce0_eb.common,
+	&ce1_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_apahb_gate_hws = {
+	.hws	= {
+		[CLK_USB3_EB]		= &usb3_eb.common.hw,
+		[CLK_USB3_SUSPEND_EB]	= &usb3_suspend.common.hw,
+		[CLK_USB3_REF_EB]	= &usb3_ref_eb.common.hw,
+		[CLK_DMA_EB]		= &dma_eb.common.hw,
+		[CLK_SDIO0_EB]		= &sdio0_eb.common.hw,
+		[CLK_SDIO1_EB]		= &sdio1_eb.common.hw,
+		[CLK_SDIO2_EB]		= &sdio2_eb.common.hw,
+		[CLK_EMMC_EB]		= &emmc_eb.common.hw,
+		[CLK_ROM_EB]		= &rom_eb.common.hw,
+		[CLK_BUSMON_EB]		= &busmon_eb.common.hw,
+		[CLK_CC63S_EB]		= &cc63s_eb.common.hw,
+		[CLK_CC63P_EB]		= &cc63p_eb.common.hw,
+		[CLK_CE0_EB]		= &ce0_eb.common.hw,
+		[CLK_CE1_EB]		= &ce1_eb.common.hw,
+	},
+	.num	= CLK_APAHB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_apahb_gate_desc = {
+	.clk_clks	= sc9860_apahb_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_apahb_gate),
+	.hw_clks	= &sc9860_apahb_gate_hws,
+};
+
+static SPRD_SC_GATE_CLK(avs_lit_eb,	"avs-lit-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(avs_big_eb,	"avs-big-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc5_eb,	"ap-intc5-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpio_eb,		"gpio-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm0_eb,		"pwm0-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm1_eb,		"pwm1-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm2_eb,		"pwm2-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pwm3_eb,		"pwm3-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(kpd_eb,		"kpd-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_sys_eb,	"aon-sys-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_sys_eb,	"ap-sys-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_tmr_eb,	"aon-tmr-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr0_eb,	"ap-tmr0-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(efuse_eb,	"efuse-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(eic_eb,		"eic-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pub1_reg_eb,	"pub1-reg-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(adi_eb,		"adi-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc0_eb,	"ap-intc0-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc1_eb,	"ap-intc1-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc2_eb,	"ap-intc2-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc3_eb,	"ap-intc3-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_intc4_eb,	"ap-intc4-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(splk_eb,		"splk-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mspi_eb,		"mspi-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pub0_reg_eb,	"pub0-reg-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pin_eb,		"pin-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_ckg_eb,	"aon-ckg-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpu_eb,		"gpu-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(27), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(apcpu_ts0_eb,	"apcpu-ts0-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(apcpu_ts1_eb,	"apcpu-ts1-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dap_eb,		"dap-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c_eb,		"i2c-eb",	"aon-apb", 0x0,
+		     0x1000, BIT(31), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(pmu_eb,		"pmu-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(thm_eb,		"thm-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux0_eb,		"aux0-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux1_eb,		"aux1-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aux2_eb,		"aux2-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(probe_eb,		"probe-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpu0_avs_eb,	"gpu0-avs-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gpu1_avs_eb,	"gpu1-avs-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(apcpu_wdg_eb,	"apcpu-wdg-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr1_eb,	"ap-tmr1-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_tmr2_eb,	"ap-tmr2-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(disp_emc_eb,	"disp-emc-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(zip_emc_eb,	"zip-emc-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(gsp_emc_eb,	"gsp-emc-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(osc_aon_eb,	"osc-aon-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(lvds_trx_eb,	"lvds-trx-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(lvds_tcxo_eb,	"lvds-tcxo-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mdar_eb,		"mdar-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rtc4m0_cal_eb, "rtc4m0-cal-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(rct100m_cal_eb, "rct100m-cal-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(djtag_eb,		"djtag-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(mbox_eb,		"mbox-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_dma_eb,	"aon-dma-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(22), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dbg_emc_eb,	"dbg-emc-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(23), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(lvds_pll_div_en, "lvds-pll-div-en", "aon-apb", 0x4,
+		     0x1000, BIT(24), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(def_eb,		"def-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(aon_apb_rsv0,	"aon-apb-rsv0",	"aon-apb", 0x4,
+		     0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(orp_jtag_eb,	"orp-jtag-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(27), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(vsp_eb,		"vsp-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(cam_eb,		"cam-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(disp_eb,		"disp-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(dbg_axi_if_eb, "dbg-axi-if-eb",	"aon-apb", 0x4,
+		     0x1000, BIT(31), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(sdio0_2x_en,	"sdio0-2x-en",	"aon-apb", 0x13c,
+			       0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(sdio1_2x_en,	"sdio1-2x-en",	"aon-apb", 0x13c,
+			       0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(sdio2_2x_en,	"sdio2-2x-en",	"aon-apb", 0x13c,
+			       0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(emmc_2x_en,	"emmc-2x-en",	"aon-apb", 0x13c,
+			       0x1000, BIT(9), 0, 0);
+
+static struct sprd_clk_common *sc9860_aon_gate[] = {
+	/* address base is 0x402e0000 */
+	&avs_lit_eb.common,
+	&avs_big_eb.common,
+	&ap_intc5_eb.common,
+	&gpio_eb.common,
+	&pwm0_eb.common,
+	&pwm1_eb.common,
+	&pwm2_eb.common,
+	&pwm3_eb.common,
+	&kpd_eb.common,
+	&aon_sys_eb.common,
+	&ap_sys_eb.common,
+	&aon_tmr_eb.common,
+	&ap_tmr0_eb.common,
+	&efuse_eb.common,
+	&eic_eb.common,
+	&pub1_reg_eb.common,
+	&adi_eb.common,
+	&ap_intc0_eb.common,
+	&ap_intc1_eb.common,
+	&ap_intc2_eb.common,
+	&ap_intc3_eb.common,
+	&ap_intc4_eb.common,
+	&splk_eb.common,
+	&mspi_eb.common,
+	&pub0_reg_eb.common,
+	&pin_eb.common,
+	&aon_ckg_eb.common,
+	&gpu_eb.common,
+	&apcpu_ts0_eb.common,
+	&apcpu_ts1_eb.common,
+	&dap_eb.common,
+	&i2c_eb.common,
+	&pmu_eb.common,
+	&thm_eb.common,
+	&aux0_eb.common,
+	&aux1_eb.common,
+	&aux2_eb.common,
+	&probe_eb.common,
+	&gpu0_avs_eb.common,
+	&gpu1_avs_eb.common,
+	&apcpu_wdg_eb.common,
+	&ap_tmr1_eb.common,
+	&ap_tmr2_eb.common,
+	&disp_emc_eb.common,
+	&zip_emc_eb.common,
+	&gsp_emc_eb.common,
+	&osc_aon_eb.common,
+	&lvds_trx_eb.common,
+	&lvds_tcxo_eb.common,
+	&mdar_eb.common,
+	&rtc4m0_cal_eb.common,
+	&rct100m_cal_eb.common,
+	&djtag_eb.common,
+	&mbox_eb.common,
+	&aon_dma_eb.common,
+	&dbg_emc_eb.common,
+	&lvds_pll_div_en.common,
+	&def_eb.common,
+	&aon_apb_rsv0.common,
+	&orp_jtag_eb.common,
+	&vsp_eb.common,
+	&cam_eb.common,
+	&disp_eb.common,
+	&dbg_axi_if_eb.common,
+	&sdio0_2x_en.common,
+	&sdio1_2x_en.common,
+	&sdio2_2x_en.common,
+	&emmc_2x_en.common,
+};
+
+static struct clk_hw_onecell_data sc9860_aon_gate_hws = {
+	.hws	= {
+		[CLK_AVS_LIT_EB]	= &avs_lit_eb.common.hw,
+		[CLK_AVS_BIG_EB]	= &avs_big_eb.common.hw,
+		[CLK_AP_INTC5_EB]	= &ap_intc5_eb.common.hw,
+		[CLK_GPIO_EB]		= &gpio_eb.common.hw,
+		[CLK_PWM0_EB]		= &pwm0_eb.common.hw,
+		[CLK_PWM1_EB]		= &pwm1_eb.common.hw,
+		[CLK_PWM2_EB]		= &pwm2_eb.common.hw,
+		[CLK_PWM3_EB]		= &pwm3_eb.common.hw,
+		[CLK_KPD_EB]		= &kpd_eb.common.hw,
+		[CLK_AON_SYS_EB]	= &aon_sys_eb.common.hw,
+		[CLK_AP_SYS_EB]		= &ap_sys_eb.common.hw,
+		[CLK_AON_TMR_EB]	= &aon_tmr_eb.common.hw,
+		[CLK_AP_TMR0_EB]	= &ap_tmr0_eb.common.hw,
+		[CLK_EFUSE_EB]		= &efuse_eb.common.hw,
+		[CLK_EIC_EB]		= &eic_eb.common.hw,
+		[CLK_PUB1_REG_EB]	= &pub1_reg_eb.common.hw,
+		[CLK_ADI_EB]		= &adi_eb.common.hw,
+		[CLK_AP_INTC0_EB]	= &ap_intc0_eb.common.hw,
+		[CLK_AP_INTC1_EB]	= &ap_intc1_eb.common.hw,
+		[CLK_AP_INTC2_EB]	= &ap_intc2_eb.common.hw,
+		[CLK_AP_INTC3_EB]	= &ap_intc3_eb.common.hw,
+		[CLK_AP_INTC4_EB]	= &ap_intc4_eb.common.hw,
+		[CLK_SPLK_EB]		= &splk_eb.common.hw,
+		[CLK_MSPI_EB]		= &mspi_eb.common.hw,
+		[CLK_PUB0_REG_EB]	= &pub0_reg_eb.common.hw,
+		[CLK_PIN_EB]		= &pin_eb.common.hw,
+		[CLK_AON_CKG_EB]	= &aon_ckg_eb.common.hw,
+		[CLK_GPU_EB]		= &gpu_eb.common.hw,
+		[CLK_APCPU_TS0_EB]	= &apcpu_ts0_eb.common.hw,
+		[CLK_APCPU_TS1_EB]	= &apcpu_ts1_eb.common.hw,
+		[CLK_DAP_EB]		= &dap_eb.common.hw,
+		[CLK_I2C_EB]		= &i2c_eb.common.hw,
+		[CLK_PMU_EB]		= &pmu_eb.common.hw,
+		[CLK_THM_EB]		= &thm_eb.common.hw,
+		[CLK_AUX0_EB]		= &aux0_eb.common.hw,
+		[CLK_AUX1_EB]		= &aux1_eb.common.hw,
+		[CLK_AUX2_EB]		= &aux2_eb.common.hw,
+		[CLK_PROBE_EB]		= &probe_eb.common.hw,
+		[CLK_GPU0_AVS_EB]	= &gpu0_avs_eb.common.hw,
+		[CLK_GPU1_AVS_EB]	= &gpu1_avs_eb.common.hw,
+		[CLK_APCPU_WDG_EB]	= &apcpu_wdg_eb.common.hw,
+		[CLK_AP_TMR1_EB]	= &ap_tmr1_eb.common.hw,
+		[CLK_AP_TMR2_EB]	= &ap_tmr2_eb.common.hw,
+		[CLK_DISP_EMC_EB]	= &disp_emc_eb.common.hw,
+		[CLK_ZIP_EMC_EB]	= &zip_emc_eb.common.hw,
+		[CLK_GSP_EMC_EB]	= &gsp_emc_eb.common.hw,
+		[CLK_OSC_AON_EB]	= &osc_aon_eb.common.hw,
+		[CLK_LVDS_TRX_EB]	= &lvds_trx_eb.common.hw,
+		[CLK_LVDS_TCXO_EB]	= &lvds_tcxo_eb.common.hw,
+		[CLK_MDAR_EB]		= &mdar_eb.common.hw,
+		[CLK_RTC4M0_CAL_EB]	= &rtc4m0_cal_eb.common.hw,
+		[CLK_RCT100M_CAL_EB]	= &rct100m_cal_eb.common.hw,
+		[CLK_DJTAG_EB]		= &djtag_eb.common.hw,
+		[CLK_MBOX_EB]		= &mbox_eb.common.hw,
+		[CLK_AON_DMA_EB]	= &aon_dma_eb.common.hw,
+		[CLK_DBG_EMC_EB]	= &dbg_emc_eb.common.hw,
+		[CLK_LVDS_PLL_DIV_EN]	= &lvds_pll_div_en.common.hw,
+		[CLK_DEF_EB]		= &def_eb.common.hw,
+		[CLK_AON_APB_RSV0]	= &aon_apb_rsv0.common.hw,
+		[CLK_ORP_JTAG_EB]	= &orp_jtag_eb.common.hw,
+		[CLK_VSP_EB]		= &vsp_eb.common.hw,
+		[CLK_CAM_EB]		= &cam_eb.common.hw,
+		[CLK_DISP_EB]		= &disp_eb.common.hw,
+		[CLK_DBG_AXI_IF_EB]	= &dbg_axi_if_eb.common.hw,
+		[CLK_SDIO0_2X_EN]	= &sdio0_2x_en.common.hw,
+		[CLK_SDIO1_2X_EN]	= &sdio1_2x_en.common.hw,
+		[CLK_SDIO2_2X_EN]	= &sdio2_2x_en.common.hw,
+		[CLK_EMMC_2X_EN]	= &emmc_2x_en.common.hw,
+	},
+	.num	= CLK_AON_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_aon_gate_desc = {
+	.clk_clks	= sc9860_aon_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_aon_gate),
+	.hw_clks	= &sc9860_aon_gate_hws,
+};
+
+static const u8 mcu_table[] = { 0, 1, 2, 3, 4, 8 };
+static const char * const lit_mcu_parents[] = {	"ext-26m",	"twpll-512m",
+						"twpll-768m",	"ltepll0",
+						"twpll",	"mpll0" };
+static SPRD_COMP_CLK_TABLE(lit_mcu, "lit-mcu", lit_mcu_parents, 0x20,
+			   mcu_table, 0, 4, 4, 3, 0);
+
+static const char * const big_mcu_parents[] = {	"ext-26m",	"twpll-512m",
+						"twpll-768m",	"ltepll0",
+						"twpll",	"mpll1" };
+static SPRD_COMP_CLK_TABLE(big_mcu, "big-mcu", big_mcu_parents, 0x24,
+			   mcu_table, 0, 4, 4, 3, 0);
+
+static struct sprd_clk_common *sc9860_aonsecure_clk[] = {
+	/* address base is 0x40880000 */
+	&lit_mcu.common,
+	&big_mcu.common,
+};
+
+static struct clk_hw_onecell_data sc9860_aonsecure_clk_hws = {
+	.hws	= {
+		[CLK_LIT_MCU]		= &lit_mcu.common.hw,
+		[CLK_BIG_MCU]		= &big_mcu.common.hw,
+	},
+	.num	= CLK_AONSECURE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_aonsecure_clk_desc = {
+	.clk_clks	= sc9860_aonsecure_clk,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_aonsecure_clk),
+	.hw_clks	= &sc9860_aonsecure_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(agcp_iis0_eb,	"agcp-iis0-eb",		"aon-apb",
+		     0x0, 0x100, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_iis1_eb,	"agcp-iis1-eb",		"aon-apb",
+		     0x0, 0x100, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_iis2_eb,	"agcp-iis2-eb",		"aon-apb",
+		     0x0, 0x100, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_iis3_eb,	"agcp-iis3-eb",		"aon-apb",
+		     0x0, 0x100, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_uart_eb,	"agcp-uart-eb",		"aon-apb",
+		     0x0, 0x100, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_dmacp_eb,	"agcp-dmacp-eb",	"aon-apb",
+		     0x0, 0x100, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_dmaap_eb,	"agcp-dmaap-eb",	"aon-apb",
+		     0x0, 0x100, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_arc48k_eb,	"agcp-arc48k-eb",	"aon-apb",
+		     0x0, 0x100, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_src44p1k_eb, "agcp-src44p1k-eb",	"aon-apb",
+		     0x0, 0x100, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_mcdt_eb,	"agcp-mcdt-eb",		"aon-apb",
+		     0x0, 0x100, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_vbcifd_eb,	"agcp-vbcifd-eb",	"aon-apb",
+		     0x0, 0x100, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_vbc_eb,	"agcp-vbc-eb",		"aon-apb",
+		     0x0, 0x100, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_spinlock_eb, "agcp-spinlock-eb",	"aon-apb",
+		     0x0, 0x100, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_icu_eb,	"agcp-icu-eb",		"aon-apb",
+		     0x0, 0x100, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(agcp_ap_ashb_eb, "agcp-ap-ashb-eb",	"aon-apb",
+		     0x0, 0x100, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_cp_ashb_eb, "agcp-cp-ashb-eb",	"aon-apb",
+		     0x0, 0x100, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_aud_eb,	"agcp-aud-eb",		"aon-apb",
+		     0x0, 0x100, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK(agcp_audif_eb,	"agcp-audif-eb",	"aon-apb",
+		     0x0, 0x100, BIT(20), 0, 0);
+
+static struct sprd_clk_common *sc9860_agcp_gate[] = {
+	/* address base is 0x415e0000 */
+	&agcp_iis0_eb.common,
+	&agcp_iis1_eb.common,
+	&agcp_iis2_eb.common,
+	&agcp_iis3_eb.common,
+	&agcp_uart_eb.common,
+	&agcp_dmacp_eb.common,
+	&agcp_dmaap_eb.common,
+	&agcp_arc48k_eb.common,
+	&agcp_src44p1k_eb.common,
+	&agcp_mcdt_eb.common,
+	&agcp_vbcifd_eb.common,
+	&agcp_vbc_eb.common,
+	&agcp_spinlock_eb.common,
+	&agcp_icu_eb.common,
+	&agcp_ap_ashb_eb.common,
+	&agcp_cp_ashb_eb.common,
+	&agcp_aud_eb.common,
+	&agcp_audif_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_agcp_gate_hws = {
+	.hws	= {
+		[CLK_AGCP_IIS0_EB]	= &agcp_iis0_eb.common.hw,
+		[CLK_AGCP_IIS1_EB]	= &agcp_iis1_eb.common.hw,
+		[CLK_AGCP_IIS2_EB]	= &agcp_iis2_eb.common.hw,
+		[CLK_AGCP_IIS3_EB]	= &agcp_iis3_eb.common.hw,
+		[CLK_AGCP_UART_EB]	= &agcp_uart_eb.common.hw,
+		[CLK_AGCP_DMACP_EB]	= &agcp_dmacp_eb.common.hw,
+		[CLK_AGCP_DMAAP_EB]	= &agcp_dmaap_eb.common.hw,
+		[CLK_AGCP_ARC48K_EB]	= &agcp_arc48k_eb.common.hw,
+		[CLK_AGCP_SRC44P1K_EB]	= &agcp_src44p1k_eb.common.hw,
+		[CLK_AGCP_MCDT_EB]	= &agcp_mcdt_eb.common.hw,
+		[CLK_AGCP_VBCIFD_EB]	= &agcp_vbcifd_eb.common.hw,
+		[CLK_AGCP_VBC_EB]	= &agcp_vbc_eb.common.hw,
+		[CLK_AGCP_SPINLOCK_EB]	= &agcp_spinlock_eb.common.hw,
+		[CLK_AGCP_ICU_EB]	= &agcp_icu_eb.common.hw,
+		[CLK_AGCP_AP_ASHB_EB]	= &agcp_ap_ashb_eb.common.hw,
+		[CLK_AGCP_CP_ASHB_EB]	= &agcp_cp_ashb_eb.common.hw,
+		[CLK_AGCP_AUD_EB]	= &agcp_aud_eb.common.hw,
+		[CLK_AGCP_AUDIF_EB]	= &agcp_audif_eb.common.hw,
+	},
+	.num	= CLK_AGCP_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_agcp_gate_desc = {
+	.clk_clks	= sc9860_agcp_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_agcp_gate),
+	.hw_clks	= &sc9860_agcp_gate_hws,
+};
+
+static const char * const gpu_parents[] = { "twpll-512m",
+					    "twpll-768m",
+					    "gpll" };
+static SPRD_COMP_CLK(gpu_clk,	"gpu",	gpu_parents, 0x20,
+		     0, 2, 8, 4, 0);
+
+static struct sprd_clk_common *sc9860_gpu_clk[] = {
+	/* address base is 0x60200000 */
+	&gpu_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9860_gpu_clk_hws = {
+	.hws	= {
+		[CLK_GPU]	= &gpu_clk.common.hw,
+	},
+	.num	= CLK_GPU_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_gpu_clk_desc = {
+	.clk_clks	= sc9860_gpu_clk,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_gpu_clk),
+	.hw_clks	= &sc9860_gpu_clk_hws,
+};
+
+static const char * const ahb_parents[] = { "ext-26m", "twpll-96m",
+					    "twpll-128m", "twpll-153m6" };
+static SPRD_MUX_CLK(ahb_vsp, "ahb-vsp", ahb_parents, 0x20,
+		    0, 2, SC9860_MUX_FLAG);
+
+static const char * const vsp_parents[] = {	"twpll-76m8",	"twpll-128m",
+						"twpll-256m",	"twpll-307m2",
+						"twpll-384m" };
+static SPRD_COMP_CLK(vsp_clk, "vsp", vsp_parents, 0x24, 0, 3, 8, 2, 0);
+
+static const char * const dispc_parents[] = {	"twpll-76m8",	"twpll-128m",
+						"twpll-256m",	"twpll-307m2" };
+static SPRD_COMP_CLK(vsp_enc, "vsp-enc", dispc_parents, 0x28, 0, 2, 8, 2, 0);
+
+static const char * const vpp_parents[] = { "twpll-96m", "twpll-153m6",
+					    "twpll-192m", "twpll-256m" };
+static SPRD_MUX_CLK(vpp_clk, "vpp", vpp_parents, 0x2c,
+		    0, 2, SC9860_MUX_FLAG);
+static const char * const vsp_26m_parents[] = { "ext-26m" };
+static SPRD_MUX_CLK(vsp_26m, "vsp-26m", vsp_26m_parents, 0x30,
+		    0, 1, SC9860_MUX_FLAG);
+
+static struct sprd_clk_common *sc9860_vsp_clk[] = {
+	/* address base is 0x61000000 */
+	&ahb_vsp.common,
+	&vsp_clk.common,
+	&vsp_enc.common,
+	&vpp_clk.common,
+	&vsp_26m.common,
+};
+
+static struct clk_hw_onecell_data sc9860_vsp_clk_hws = {
+	.hws	= {
+		[CLK_AHB_VSP]	= &ahb_vsp.common.hw,
+		[CLK_VSP]	= &vsp_clk.common.hw,
+		[CLK_VSP_ENC]	= &vsp_enc.common.hw,
+		[CLK_VPP]	= &vpp_clk.common.hw,
+		[CLK_VSP_26M]	= &vsp_26m.common.hw,
+	},
+	.num	= CLK_VSP_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_vsp_clk_desc = {
+	.clk_clks	= sc9860_vsp_clk,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_vsp_clk),
+	.hw_clks	= &sc9860_vsp_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(vsp_dec_eb,	"vsp-dec-eb",	"ahb-vsp", 0x0,
+		     0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_ckg_eb,	"vsp-ckg-eb",	"ahb-vsp", 0x0,
+		     0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_mmu_eb,	"vsp-mmu-eb",	"ahb-vsp", 0x0,
+		     0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_enc_eb,	"vsp-enc-eb",	"ahb-vsp", 0x0,
+		     0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(vpp_eb,		"vpp-eb",	"ahb-vsp", 0x0,
+		     0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(vsp_26m_eb,	"vsp-26m-eb",	"ahb-vsp", 0x0,
+		     0x1000, BIT(5), 0, 0);
+static SPRD_GATE_CLK(vsp_axi_gate,	"vsp-axi-gate",	"ahb-vsp", 0x8,
+		     BIT(0), 0, 0);
+static SPRD_GATE_CLK(vsp_enc_gate,	"vsp-enc-gate",	"ahb-vsp", 0x8,
+		     BIT(1), 0, 0);
+static SPRD_GATE_CLK(vpp_axi_gate,	"vpp-axi-gate",	"ahb-vsp", 0x8,
+		     BIT(2), 0, 0);
+static SPRD_GATE_CLK(vsp_bm_gate,	"vsp-bm-gate",	"ahb-vsp", 0x8,
+		     BIT(8), 0, 0);
+static SPRD_GATE_CLK(vsp_enc_bm_gate, "vsp-enc-bm-gate", "ahb-vsp", 0x8,
+		     BIT(9), 0, 0);
+static SPRD_GATE_CLK(vpp_bm_gate,	"vpp-bm-gate",	"ahb-vsp", 0x8,
+		     BIT(10), 0, 0);
+
+static struct sprd_clk_common *sc9860_vsp_gate[] = {
+	/* address base is 0x61100000 */
+	&vsp_dec_eb.common,
+	&vsp_ckg_eb.common,
+	&vsp_mmu_eb.common,
+	&vsp_enc_eb.common,
+	&vpp_eb.common,
+	&vsp_26m_eb.common,
+	&vsp_axi_gate.common,
+	&vsp_enc_gate.common,
+	&vpp_axi_gate.common,
+	&vsp_bm_gate.common,
+	&vsp_enc_bm_gate.common,
+	&vpp_bm_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9860_vsp_gate_hws = {
+	.hws	= {
+		[CLK_VSP_DEC_EB]	= &vsp_dec_eb.common.hw,
+		[CLK_VSP_CKG_EB]	= &vsp_ckg_eb.common.hw,
+		[CLK_VSP_MMU_EB]	= &vsp_mmu_eb.common.hw,
+		[CLK_VSP_ENC_EB]	= &vsp_enc_eb.common.hw,
+		[CLK_VPP_EB]		= &vpp_eb.common.hw,
+		[CLK_VSP_26M_EB]	= &vsp_26m_eb.common.hw,
+		[CLK_VSP_AXI_GATE]	= &vsp_axi_gate.common.hw,
+		[CLK_VSP_ENC_GATE]	= &vsp_enc_gate.common.hw,
+		[CLK_VPP_AXI_GATE]	= &vpp_axi_gate.common.hw,
+		[CLK_VSP_BM_GATE]	= &vsp_bm_gate.common.hw,
+		[CLK_VSP_ENC_BM_GATE]	= &vsp_enc_bm_gate.common.hw,
+		[CLK_VPP_BM_GATE]	= &vpp_bm_gate.common.hw,
+	},
+	.num	= CLK_VSP_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_vsp_gate_desc = {
+	.clk_clks	= sc9860_vsp_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_vsp_gate),
+	.hw_clks	= &sc9860_vsp_gate_hws,
+};
+
+static SPRD_MUX_CLK(ahb_cam, "ahb-cam", ahb_parents, 0x20,
+		    0, 2, SC9860_MUX_FLAG);
+static const char * const sensor_parents[] = {	"ext-26m",	"twpll-48m",
+						"twpll-76m8",	"twpll-96m" };
+static SPRD_COMP_CLK(sensor0_clk, "sensor0", sensor_parents, 0x24,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(sensor1_clk, "sensor1", sensor_parents, 0x28,
+		     0, 2, 8, 3, 0);
+static SPRD_COMP_CLK(sensor2_clk, "sensor2", sensor_parents, 0x2c,
+		     0, 2, 8, 3, 0);
+static SPRD_GATE_CLK(mipi_csi0_eb, "mipi-csi0-eb", "ahb-cam", 0x4c,
+		     BIT(16), 0, 0);
+static SPRD_GATE_CLK(mipi_csi1_eb, "mipi-csi1-eb", "ahb-cam", 0x50,
+		     BIT(16), 0, 0);
+
+static struct sprd_clk_common *sc9860_cam_clk[] = {
+	/* address base is 0x62000000 */
+	&ahb_cam.common,
+	&sensor0_clk.common,
+	&sensor1_clk.common,
+	&sensor2_clk.common,
+	&mipi_csi0_eb.common,
+	&mipi_csi1_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_cam_clk_hws = {
+	.hws	= {
+		[CLK_AHB_CAM]		= &ahb_cam.common.hw,
+		[CLK_SENSOR0]		= &sensor0_clk.common.hw,
+		[CLK_SENSOR1]		= &sensor1_clk.common.hw,
+		[CLK_SENSOR2]		= &sensor2_clk.common.hw,
+		[CLK_MIPI_CSI0_EB]	= &mipi_csi0_eb.common.hw,
+		[CLK_MIPI_CSI1_EB]	= &mipi_csi1_eb.common.hw,
+	},
+	.num	= CLK_CAM_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_cam_clk_desc = {
+	.clk_clks	= sc9860_cam_clk,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_cam_clk),
+	.hw_clks	= &sc9860_cam_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(dcam0_eb,		"dcam0-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(dcam1_eb,		"dcam1-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(isp0_eb,		"isp0-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(csi0_eb,		"csi0-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(csi1_eb,		"csi1-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(jpg0_eb,		"jpg0-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(jpg1_eb,		"jpg1-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(cam_ckg_eb,	"cam-ckg-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK(cam_mmu_eb,	"cam-mmu-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK(isp1_eb,		"isp1-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK(cpp_eb,		"cpp-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK(mmu_pf_eb,		"mmu-pf-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK(isp2_eb,		"isp2-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK(dcam2isp_if_eb, "dcam2isp-if-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK(isp2dcam_if_eb, "isp2dcam-if-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK(isp_lclk_eb,	"isp-lclk-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK(isp_iclk_eb,	"isp-iclk-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK(isp_mclk_eb,	"isp-mclk-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK(isp_pclk_eb,	"isp-pclk-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(isp_isp2dcam_eb, "isp-isp2dcam-eb", "ahb-cam", 0x0,
+		     0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK(dcam0_if_eb,	"dcam0-if-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(20), 0, 0);
+static SPRD_SC_GATE_CLK(clk26m_if_eb,	"clk26m-if-eb",	"ahb-cam", 0x0,
+		     0x1000, BIT(21), 0, 0);
+static SPRD_GATE_CLK(cphy0_gate, "cphy0-gate", "ahb-cam", 0x8,
+		     BIT(0), 0, 0);
+static SPRD_GATE_CLK(mipi_csi0_gate, "mipi-csi0-gate", "ahb-cam", 0x8,
+		     BIT(1), 0, 0);
+static SPRD_GATE_CLK(cphy1_gate,	"cphy1-gate",	"ahb-cam", 0x8,
+		     BIT(2), 0, 0);
+static SPRD_GATE_CLK(mipi_csi1,		"mipi-csi1",	"ahb-cam", 0x8,
+		     BIT(3), 0, 0);
+static SPRD_GATE_CLK(dcam0_axi_gate,	"dcam0-axi-gate", "ahb-cam", 0x8,
+		     BIT(4), 0, 0);
+static SPRD_GATE_CLK(dcam1_axi_gate,	"dcam1-axi-gate", "ahb-cam", 0x8,
+		     BIT(5), 0, 0);
+static SPRD_GATE_CLK(sensor0_gate,	"sensor0-gate",	"ahb-cam", 0x8,
+		     BIT(6), 0, 0);
+static SPRD_GATE_CLK(sensor1_gate,	"sensor1-gate",	"ahb-cam", 0x8,
+		     BIT(7), 0, 0);
+static SPRD_GATE_CLK(jpg0_axi_gate,	"jpg0-axi-gate", "ahb-cam", 0x8,
+		     BIT(8), 0, 0);
+static SPRD_GATE_CLK(gpg1_axi_gate,	"gpg1-axi-gate", "ahb-cam", 0x8,
+		     BIT(9), 0, 0);
+static SPRD_GATE_CLK(isp0_axi_gate,	"isp0-axi-gate", "ahb-cam", 0x8,
+		     BIT(10), 0, 0);
+static SPRD_GATE_CLK(isp1_axi_gate,	"isp1-axi-gate", "ahb-cam", 0x8,
+		     BIT(11), 0, 0);
+static SPRD_GATE_CLK(isp2_axi_gate,	"isp2-axi-gate", "ahb-cam", 0x8,
+		     BIT(12), 0, 0);
+static SPRD_GATE_CLK(cpp_axi_gate,	"cpp-axi-gate",	"ahb-cam", 0x8,
+		     BIT(13), 0, 0);
+static SPRD_GATE_CLK(d0_if_axi_gate,	"d0-if-axi-gate", "ahb-cam", 0x8,
+		     BIT(14), 0, 0);
+static SPRD_GATE_CLK(d2i_if_axi_gate, "d2i-if-axi-gate", "ahb-cam", 0x8,
+		     BIT(15), 0, 0);
+static SPRD_GATE_CLK(i2d_if_axi_gate, "i2d-if-axi-gate", "ahb-cam", 0x8,
+		     BIT(16), 0, 0);
+static SPRD_GATE_CLK(spare_axi_gate, "spare-axi-gate",	"ahb-cam", 0x8,
+		     BIT(17), 0, 0);
+static SPRD_GATE_CLK(sensor2_gate, "sensor2-gate",	"ahb-cam", 0x8,
+		     BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK(d0if_in_d_en, "d0if-in-d-en", "ahb-cam", 0x28,
+		     0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(d1if_in_d_en, "d1if-in-d-en", "ahb-cam", 0x28,
+		     0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(d0if_in_d2i_en, "d0if-in-d2i-en", "ahb-cam", 0x28,
+		     0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(d1if_in_d2i_en, "d1if-in-d2i-en",	"ahb-cam", 0x28,
+		     0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(ia_in_d2i_en, "ia-in-d2i-en",	"ahb-cam", 0x28,
+		     0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(ib_in_d2i_en,	"ib-in-d2i-en",	"ahb-cam", 0x28,
+		     0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(ic_in_d2i_en,	"ic-in-d2i-en",	"ahb-cam", 0x28,
+		     0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(ia_in_i_en,	"ia-in-i-en",	"ahb-cam", 0x28,
+		     0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK(ib_in_i_en,	"ib-in-i-en",	"ahb-cam", 0x28,
+		     0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK(ic_in_i_en,	"ic-in-i-en",	"ahb-cam", 0x28,
+		     0x1000, BIT(9), 0, 0);
+
+static struct sprd_clk_common *sc9860_cam_gate[] = {
+	/* address base is 0x62100000 */
+	&dcam0_eb.common,
+	&dcam1_eb.common,
+	&isp0_eb.common,
+	&csi0_eb.common,
+	&csi1_eb.common,
+	&jpg0_eb.common,
+	&jpg1_eb.common,
+	&cam_ckg_eb.common,
+	&cam_mmu_eb.common,
+	&isp1_eb.common,
+	&cpp_eb.common,
+	&mmu_pf_eb.common,
+	&isp2_eb.common,
+	&dcam2isp_if_eb.common,
+	&isp2dcam_if_eb.common,
+	&isp_lclk_eb.common,
+	&isp_iclk_eb.common,
+	&isp_mclk_eb.common,
+	&isp_pclk_eb.common,
+	&isp_isp2dcam_eb.common,
+	&dcam0_if_eb.common,
+	&clk26m_if_eb.common,
+	&cphy0_gate.common,
+	&mipi_csi0_gate.common,
+	&cphy1_gate.common,
+	&mipi_csi1.common,
+	&dcam0_axi_gate.common,
+	&dcam1_axi_gate.common,
+	&sensor0_gate.common,
+	&sensor1_gate.common,
+	&jpg0_axi_gate.common,
+	&gpg1_axi_gate.common,
+	&isp0_axi_gate.common,
+	&isp1_axi_gate.common,
+	&isp2_axi_gate.common,
+	&cpp_axi_gate.common,
+	&d0_if_axi_gate.common,
+	&d2i_if_axi_gate.common,
+	&i2d_if_axi_gate.common,
+	&spare_axi_gate.common,
+	&sensor2_gate.common,
+	&d0if_in_d_en.common,
+	&d1if_in_d_en.common,
+	&d0if_in_d2i_en.common,
+	&d1if_in_d2i_en.common,
+	&ia_in_d2i_en.common,
+	&ib_in_d2i_en.common,
+	&ic_in_d2i_en.common,
+	&ia_in_i_en.common,
+	&ib_in_i_en.common,
+	&ic_in_i_en.common,
+};
+
+static struct clk_hw_onecell_data sc9860_cam_gate_hws = {
+	.hws	= {
+		[CLK_DCAM0_EB]		= &dcam0_eb.common.hw,
+		[CLK_DCAM1_EB]		= &dcam1_eb.common.hw,
+		[CLK_ISP0_EB]		= &isp0_eb.common.hw,
+		[CLK_CSI0_EB]		= &csi0_eb.common.hw,
+		[CLK_CSI1_EB]		= &csi1_eb.common.hw,
+		[CLK_JPG0_EB]		= &jpg0_eb.common.hw,
+		[CLK_JPG1_EB]		= &jpg1_eb.common.hw,
+		[CLK_CAM_CKG_EB]	= &cam_ckg_eb.common.hw,
+		[CLK_CAM_MMU_EB]	= &cam_mmu_eb.common.hw,
+		[CLK_ISP1_EB]		= &isp1_eb.common.hw,
+		[CLK_CPP_EB]		= &cpp_eb.common.hw,
+		[CLK_MMU_PF_EB]		= &mmu_pf_eb.common.hw,
+		[CLK_ISP2_EB]		= &isp2_eb.common.hw,
+		[CLK_DCAM2ISP_IF_EB]	= &dcam2isp_if_eb.common.hw,
+		[CLK_ISP2DCAM_IF_EB]	= &isp2dcam_if_eb.common.hw,
+		[CLK_ISP_LCLK_EB]	= &isp_lclk_eb.common.hw,
+		[CLK_ISP_ICLK_EB]	= &isp_iclk_eb.common.hw,
+		[CLK_ISP_MCLK_EB]	= &isp_mclk_eb.common.hw,
+		[CLK_ISP_PCLK_EB]	= &isp_pclk_eb.common.hw,
+		[CLK_ISP_ISP2DCAM_EB]	= &isp_isp2dcam_eb.common.hw,
+		[CLK_DCAM0_IF_EB]	= &dcam0_if_eb.common.hw,
+		[CLK_CLK26M_IF_EB]	= &clk26m_if_eb.common.hw,
+		[CLK_CPHY0_GATE]	= &cphy0_gate.common.hw,
+		[CLK_MIPI_CSI0_GATE]	= &mipi_csi0_gate.common.hw,
+		[CLK_CPHY1_GATE]	= &cphy1_gate.common.hw,
+		[CLK_MIPI_CSI1]		= &mipi_csi1.common.hw,
+		[CLK_DCAM0_AXI_GATE]	= &dcam0_axi_gate.common.hw,
+		[CLK_DCAM1_AXI_GATE]	= &dcam1_axi_gate.common.hw,
+		[CLK_SENSOR0_GATE]	= &sensor0_gate.common.hw,
+		[CLK_SENSOR1_GATE]	= &sensor1_gate.common.hw,
+		[CLK_JPG0_AXI_GATE]	= &jpg0_axi_gate.common.hw,
+		[CLK_GPG1_AXI_GATE]	= &gpg1_axi_gate.common.hw,
+		[CLK_ISP0_AXI_GATE]	= &isp0_axi_gate.common.hw,
+		[CLK_ISP1_AXI_GATE]	= &isp1_axi_gate.common.hw,
+		[CLK_ISP2_AXI_GATE]	= &isp2_axi_gate.common.hw,
+		[CLK_CPP_AXI_GATE]	= &cpp_axi_gate.common.hw,
+		[CLK_D0_IF_AXI_GATE]	= &d0_if_axi_gate.common.hw,
+		[CLK_D2I_IF_AXI_GATE]	= &d2i_if_axi_gate.common.hw,
+		[CLK_I2D_IF_AXI_GATE]	= &i2d_if_axi_gate.common.hw,
+		[CLK_SPARE_AXI_GATE]	= &spare_axi_gate.common.hw,
+		[CLK_SENSOR2_GATE]	= &sensor2_gate.common.hw,
+		[CLK_D0IF_IN_D_EN]	= &d0if_in_d_en.common.hw,
+		[CLK_D1IF_IN_D_EN]	= &d1if_in_d_en.common.hw,
+		[CLK_D0IF_IN_D2I_EN]	= &d0if_in_d2i_en.common.hw,
+		[CLK_D1IF_IN_D2I_EN]	= &d1if_in_d2i_en.common.hw,
+		[CLK_IA_IN_D2I_EN]	= &ia_in_d2i_en.common.hw,
+		[CLK_IB_IN_D2I_EN]	= &ib_in_d2i_en.common.hw,
+		[CLK_IC_IN_D2I_EN]	= &ic_in_d2i_en.common.hw,
+		[CLK_IA_IN_I_EN]	= &ia_in_i_en.common.hw,
+		[CLK_IB_IN_I_EN]	= &ib_in_i_en.common.hw,
+		[CLK_IC_IN_I_EN]	= &ic_in_i_en.common.hw,
+	},
+	.num	= CLK_CAM_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_cam_gate_desc = {
+	.clk_clks	= sc9860_cam_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_cam_gate),
+	.hw_clks	= &sc9860_cam_gate_hws,
+};
+
+static SPRD_MUX_CLK(ahb_disp, "ahb-disp", ahb_parents, 0x20,
+		    0, 2, SC9860_MUX_FLAG);
+static SPRD_COMP_CLK(dispc0_dpi, "dispc0-dpi", dispc_parents,	0x34,
+		     0, 2, 8, 2, 0);
+static SPRD_COMP_CLK(dispc1_dpi, "dispc1-dpi", dispc_parents,	0x40,
+		     0, 2, 8, 2, 0);
+
+static struct sprd_clk_common *sc9860_disp_clk[] = {
+	/* address base is 0x63000000 */
+	&ahb_disp.common,
+	&dispc0_dpi.common,
+	&dispc1_dpi.common,
+};
+
+static struct clk_hw_onecell_data sc9860_disp_clk_hws = {
+	.hws	= {
+		[CLK_AHB_DISP]		= &ahb_disp.common.hw,
+		[CLK_DISPC0_DPI]	= &dispc0_dpi.common.hw,
+		[CLK_DISPC1_DPI]	= &dispc1_dpi.common.hw,
+	},
+	.num	= CLK_DISP_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_disp_clk_desc = {
+	.clk_clks	= sc9860_disp_clk,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_disp_clk),
+	.hw_clks	= &sc9860_disp_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK(dispc0_eb,	"dispc0-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK(dispc1_eb,	"dispc1-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK(dispc_mmu_eb,	"dispc-mmu-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK(gsp0_eb,		"gsp0-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK(gsp1_eb,		"gsp1-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK(gsp0_mmu_eb,	"gsp0-mmu-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK(gsp1_mmu_eb,	"gsp1-mmu-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK(dsi0_eb,		"dsi0-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK(dsi1_eb,		"dsi1-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK(disp_ckg_eb,	"disp-ckg-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK(disp_gpu_eb,	"disp-gpu-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK(gpu_mtx_eb,	"gpu-mtx-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK(gsp_mtx_eb,	"gsp-mtx-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK(tmc_mtx_eb,	"tmc-mtx-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK(dispc_mtx_eb,	"dispc-mtx-eb",	"ahb-disp", 0x0,
+		     0x1000, BIT(16), 0, 0);
+static SPRD_GATE_CLK(dphy0_gate,	"dphy0-gate",	"ahb-disp", 0x8,
+		     BIT(0), 0, 0);
+static SPRD_GATE_CLK(dphy1_gate,	"dphy1-gate",	"ahb-disp", 0x8,
+		     BIT(1), 0, 0);
+static SPRD_GATE_CLK(gsp0_a_gate,	"gsp0-a-gate",	"ahb-disp", 0x8,
+		     BIT(2), 0, 0);
+static SPRD_GATE_CLK(gsp1_a_gate,	"gsp1-a-gate",	"ahb-disp", 0x8,
+		     BIT(3), 0, 0);
+static SPRD_GATE_CLK(gsp0_f_gate,	"gsp0-f-gate",	"ahb-disp", 0x8,
+		     BIT(4), 0, 0);
+static SPRD_GATE_CLK(gsp1_f_gate,	"gsp1-f-gate",	"ahb-disp", 0x8,
+		     BIT(5), 0, 0);
+static SPRD_GATE_CLK(d_mtx_f_gate,	"d-mtx-f-gate",	"ahb-disp", 0x8,
+		     BIT(6), 0, 0);
+static SPRD_GATE_CLK(d_mtx_a_gate,	"d-mtx-a-gate",	"ahb-disp", 0x8,
+		     BIT(7), 0, 0);
+static SPRD_GATE_CLK(d_noc_f_gate,	"d-noc-f-gate",	"ahb-disp", 0x8,
+		     BIT(8), 0, 0);
+static SPRD_GATE_CLK(d_noc_a_gate,	"d-noc-a-gate",	"ahb-disp", 0x8,
+		     BIT(9), 0, 0);
+static SPRD_GATE_CLK(gsp_mtx_f_gate, "gsp-mtx-f-gate", "ahb-disp",  0x8,
+		     BIT(10), 0, 0);
+static SPRD_GATE_CLK(gsp_mtx_a_gate, "gsp-mtx-a-gate", "ahb-disp",  0x8,
+		     BIT(11), 0, 0);
+static SPRD_GATE_CLK(gsp_noc_f_gate, "gsp-noc-f-gate", "ahb-disp",  0x8,
+		     BIT(12), 0, 0);
+static SPRD_GATE_CLK(gsp_noc_a_gate, "gsp-noc-a-gate", "ahb-disp",  0x8,
+		     BIT(13), 0, 0);
+static SPRD_GATE_CLK(dispm0idle_gate, "dispm0idle-gate", "ahb-disp", 0x8,
+		     BIT(14), 0, 0);
+static SPRD_GATE_CLK(gspm0idle_gate, "gspm0idle-gate", "ahb-disp",  0x8,
+		     BIT(15), 0, 0);
+
+static struct sprd_clk_common *sc9860_disp_gate[] = {
+	/* address base is 0x63100000 */
+	&dispc0_eb.common,
+	&dispc1_eb.common,
+	&dispc_mmu_eb.common,
+	&gsp0_eb.common,
+	&gsp1_eb.common,
+	&gsp0_mmu_eb.common,
+	&gsp1_mmu_eb.common,
+	&dsi0_eb.common,
+	&dsi1_eb.common,
+	&disp_ckg_eb.common,
+	&disp_gpu_eb.common,
+	&gpu_mtx_eb.common,
+	&gsp_mtx_eb.common,
+	&tmc_mtx_eb.common,
+	&dispc_mtx_eb.common,
+	&dphy0_gate.common,
+	&dphy1_gate.common,
+	&gsp0_a_gate.common,
+	&gsp1_a_gate.common,
+	&gsp0_f_gate.common,
+	&gsp1_f_gate.common,
+	&d_mtx_f_gate.common,
+	&d_mtx_a_gate.common,
+	&d_noc_f_gate.common,
+	&d_noc_a_gate.common,
+	&gsp_mtx_f_gate.common,
+	&gsp_mtx_a_gate.common,
+	&gsp_noc_f_gate.common,
+	&gsp_noc_a_gate.common,
+	&dispm0idle_gate.common,
+	&gspm0idle_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9860_disp_gate_hws = {
+	.hws	= {
+		[CLK_DISPC0_EB]		= &dispc0_eb.common.hw,
+		[CLK_DISPC1_EB]		= &dispc1_eb.common.hw,
+		[CLK_DISPC_MMU_EB]	= &dispc_mmu_eb.common.hw,
+		[CLK_GSP0_EB]		= &gsp0_eb.common.hw,
+		[CLK_GSP1_EB]		= &gsp1_eb.common.hw,
+		[CLK_GSP0_MMU_EB]	= &gsp0_mmu_eb.common.hw,
+		[CLK_GSP1_MMU_EB]	= &gsp1_mmu_eb.common.hw,
+		[CLK_DSI0_EB]		= &dsi0_eb.common.hw,
+		[CLK_DSI1_EB]		= &dsi1_eb.common.hw,
+		[CLK_DISP_CKG_EB]	= &disp_ckg_eb.common.hw,
+		[CLK_DISP_GPU_EB]	= &disp_gpu_eb.common.hw,
+		[CLK_GPU_MTX_EB]	= &gpu_mtx_eb.common.hw,
+		[CLK_GSP_MTX_EB]	= &gsp_mtx_eb.common.hw,
+		[CLK_TMC_MTX_EB]	= &tmc_mtx_eb.common.hw,
+		[CLK_DISPC_MTX_EB]	= &dispc_mtx_eb.common.hw,
+		[CLK_DPHY0_GATE]	= &dphy0_gate.common.hw,
+		[CLK_DPHY1_GATE]	= &dphy1_gate.common.hw,
+		[CLK_GSP0_A_GATE]	= &gsp0_a_gate.common.hw,
+		[CLK_GSP1_A_GATE]	= &gsp1_a_gate.common.hw,
+		[CLK_GSP0_F_GATE]	= &gsp0_f_gate.common.hw,
+		[CLK_GSP1_F_GATE]	= &gsp1_f_gate.common.hw,
+		[CLK_D_MTX_F_GATE]	= &d_mtx_f_gate.common.hw,
+		[CLK_D_MTX_A_GATE]	= &d_mtx_a_gate.common.hw,
+		[CLK_D_NOC_F_GATE]	= &d_noc_f_gate.common.hw,
+		[CLK_D_NOC_A_GATE]	= &d_noc_a_gate.common.hw,
+		[CLK_GSP_MTX_F_GATE]	= &gsp_mtx_f_gate.common.hw,
+		[CLK_GSP_MTX_A_GATE]	= &gsp_mtx_a_gate.common.hw,
+		[CLK_GSP_NOC_F_GATE]	= &gsp_noc_f_gate.common.hw,
+		[CLK_GSP_NOC_A_GATE]	= &gsp_noc_a_gate.common.hw,
+		[CLK_DISPM0IDLE_GATE]	= &dispm0idle_gate.common.hw,
+		[CLK_GSPM0IDLE_GATE]	= &gspm0idle_gate.common.hw,
+	},
+	.num	= CLK_DISP_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_disp_gate_desc = {
+	.clk_clks	= sc9860_disp_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_disp_gate),
+	.hw_clks	= &sc9860_disp_gate_hws,
+};
+
+static SPRD_SC_GATE_CLK(sim0_eb,	"sim0-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis0_eb,	"iis0-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis1_eb,	"iis1-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis2_eb,	"iis2-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(iis3_eb,	"iis3-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi0_eb,	"spi0-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi1_eb,	"spi1-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi2_eb,	"spi2-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c0_eb,	"i2c0-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c1_eb,	"i2c1-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c2_eb,	"i2c2-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c3_eb,	"i2c3-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c4_eb,	"i2c4-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(12), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(i2c5_eb,	"i2c5-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart0_eb,	"uart0-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart1_eb,	"uart1-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart2_eb,	"uart2-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart3_eb,	"uart3-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(uart4_eb,	"uart4-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(ap_ckg_eb,	"ap-ckg-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK(spi3_eb,	"spi3-eb",	"ap-apb", 0x0,
+		     0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+
+static struct sprd_clk_common *sc9860_apapb_gate[] = {
+	/* address base is 0x70b00000 */
+	&sim0_eb.common,
+	&iis0_eb.common,
+	&iis1_eb.common,
+	&iis2_eb.common,
+	&iis3_eb.common,
+	&spi0_eb.common,
+	&spi1_eb.common,
+	&spi2_eb.common,
+	&i2c0_eb.common,
+	&i2c1_eb.common,
+	&i2c2_eb.common,
+	&i2c3_eb.common,
+	&i2c4_eb.common,
+	&i2c5_eb.common,
+	&uart0_eb.common,
+	&uart1_eb.common,
+	&uart2_eb.common,
+	&uart3_eb.common,
+	&uart4_eb.common,
+	&ap_ckg_eb.common,
+	&spi3_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9860_apapb_gate_hws = {
+	.hws	= {
+		[CLK_SIM0_EB]		= &sim0_eb.common.hw,
+		[CLK_IIS0_EB]		= &iis0_eb.common.hw,
+		[CLK_IIS1_EB]		= &iis1_eb.common.hw,
+		[CLK_IIS2_EB]		= &iis2_eb.common.hw,
+		[CLK_IIS3_EB]		= &iis3_eb.common.hw,
+		[CLK_SPI0_EB]		= &spi0_eb.common.hw,
+		[CLK_SPI1_EB]		= &spi1_eb.common.hw,
+		[CLK_SPI2_EB]		= &spi2_eb.common.hw,
+		[CLK_I2C0_EB]		= &i2c0_eb.common.hw,
+		[CLK_I2C1_EB]		= &i2c1_eb.common.hw,
+		[CLK_I2C2_EB]		= &i2c2_eb.common.hw,
+		[CLK_I2C3_EB]		= &i2c3_eb.common.hw,
+		[CLK_I2C4_EB]		= &i2c4_eb.common.hw,
+		[CLK_I2C5_EB]		= &i2c5_eb.common.hw,
+		[CLK_UART0_EB]		= &uart0_eb.common.hw,
+		[CLK_UART1_EB]		= &uart1_eb.common.hw,
+		[CLK_UART2_EB]		= &uart2_eb.common.hw,
+		[CLK_UART3_EB]		= &uart3_eb.common.hw,
+		[CLK_UART4_EB]		= &uart4_eb.common.hw,
+		[CLK_AP_CKG_EB]		= &ap_ckg_eb.common.hw,
+		[CLK_SPI3_EB]		= &spi3_eb.common.hw,
+	},
+	.num	= CLK_APAPB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9860_apapb_gate_desc = {
+	.clk_clks	= sc9860_apapb_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9860_apapb_gate),
+	.hw_clks	= &sc9860_apapb_gate_hws,
+};
+
+static const struct of_device_id sprd_sc9860_clk_ids[] = {
+	{ .compatible = "sprd,sc9860-pmu-gate",		/* 0x402b */
+	  .data = &sc9860_pmu_gate_desc },
+	{ .compatible = "sprd,sc9860-pll",		/* 0x4040 */
+	  .data = &sc9860_pll_desc },
+	{ .compatible = "sprd,sc9860-ap-clk",		/* 0x2000 */
+	  .data = &sc9860_ap_clk_desc },
+	{ .compatible = "sprd,sc9860-aon-prediv",	/* 0x402d */
+	  .data = &sc9860_aon_prediv_desc },
+	{ .compatible = "sprd,sc9860-apahb-gate",	/* 0x2021 */
+	  .data = &sc9860_apahb_gate_desc },
+	{ .compatible = "sprd,sc9860-aon-gate",		/* 0x402e */
+	  .data = &sc9860_aon_gate_desc },
+	{ .compatible = "sprd,sc9860-aonsecure-clk",	/* 0x4088 */
+	  .data = &sc9860_aonsecure_clk_desc },
+	{ .compatible = "sprd,sc9860-agcp-gate",	/* 0x415e */
+	  .data = &sc9860_agcp_gate_desc },
+	{ .compatible = "sprd,sc9860-gpu-clk",		/* 0x6020 */
+	  .data = &sc9860_gpu_clk_desc },
+	{ .compatible = "sprd,sc9860-vsp-clk",		/* 0x6100 */
+	  .data = &sc9860_vsp_clk_desc },
+	{ .compatible = "sprd,sc9860-vsp-gate",		/* 0x6110 */
+	  .data = &sc9860_vsp_gate_desc },
+	{ .compatible = "sprd,sc9860-cam-clk",		/* 0x6200 */
+	  .data = &sc9860_cam_clk_desc },
+	{ .compatible = "sprd,sc9860-cam-gate",		/* 0x6210 */
+	  .data = &sc9860_cam_gate_desc },
+	{ .compatible = "sprd,sc9860-disp-clk",		/* 0x6300 */
+	  .data = &sc9860_disp_clk_desc },
+	{ .compatible = "sprd,sc9860-disp-gate",	/* 0x6310 */
+	  .data = &sc9860_disp_gate_desc },
+	{ .compatible = "sprd,sc9860-apapb-gate",	/* 0x70b0 */
+	  .data = &sc9860_apapb_gate_desc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sprd_sc9860_clk_ids);
+
+static int sc9860_clk_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct sprd_clk_desc *desc;
+
+	match = of_match_node(sprd_sc9860_clk_ids, pdev->dev.of_node);
+	if (!match) {
+		pr_err("%s: of_match_node() failed.", __func__);
+		return -ENODEV;
+	}
+
+	desc = match->data;
+	sprd_clk_regmap_init(pdev, desc);
+
+	return sprd_clk_probe(&pdev->dev, desc->hw_clks);
+}
+
+static struct platform_driver sc9860_clk_driver = {
+	.probe	= sc9860_clk_probe,
+	.driver	= {
+		.name	= "sc9860-clk",
+		.of_match_table	= sprd_sc9860_clk_ids,
+	},
+};
+module_platform_driver(sc9860_clk_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC9860 Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sc9860-clk");
-- 
2.7.4

[PATCH V6 11/12] arm64: dts: add syscon for whale2 platform

[Chunyan Zhang]

Some clocks on SC9860 are in the same address area with syscon
devices, the proper syscon node will be quoted under the
definitions of those clocks in DT.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 arch/arm64/boot/dts/sprd/whale2.dtsi | 46 +++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 7c217c5..6ea3a75 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -17,6 +17,51 @@
 		#size-cells = <2>;
 		ranges;
 
+		ap_ahb_regs: syscon@20210000 {
+			compatible = "syscon";
+			reg = <0 0x20210000 0 0x10000>;
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "syscon";
+			reg = <0 0x402b0000 0 0x10000>;
+		};
+
+		aon_regs: syscon@402e0000 {
+			compatible = "syscon";
+			reg = <0 0x402e0000 0 0x10000>;
+		};
+
+		ana_regs: syscon@40400000 {
+			compatible = "syscon";
+			reg = <0 0x40400000 0 0x10000>;
+		};
+
+		agcp_regs: syscon@415e0000 {
+			compatible = "syscon";
+			reg = <0 0x415e0000 0 0x1000000>;
+		};
+
+		vsp_regs: syscon@61100000 {
+			compatible = "syscon";
+			reg = <0 0x61100000 0 0x10000>;
+		};
+
+		cam_regs: syscon@62100000 {
+			compatible = "syscon";
+			reg = <0 0x62100000 0 0x10000>;
+		};
+
+		disp_regs: syscon@63100000 {
+			compatible = "syscon";
+			reg = <0 0x63100000 0 0x10000>;
+		};
+
+		ap_apb_regs: syscon@70b00000 {
+			compatible = "syscon";
+			reg = <0 0x70b00000 0 0x40000>;
+		};
+
 		ap-apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -59,7 +104,6 @@
 				status = "disabled";
 			};
 		};
-
 	};
 
 	ext_26m: ext-26m {
-- 
2.7.4

[PATCH V6 12/12] arm64: dts: add clocks for SC9860

[Chunyan Zhang]

Some clocks on SC9860 are in the same address area with syscon devices,
those are what have a property of 'sprd,syscon' which would refer to
syscon devices, others would have a reg property indicated their address
ranges.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 arch/arm64/boot/dts/sprd/sc9860.dtsi | 115 +++++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/sprd/whale2.dtsi |   2 +-
 2 files changed, 116 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 7b7d8ce..bf03da4 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
 #include "whale2.dtsi"
 
 / {
@@ -183,6 +184,120 @@
 	};
 
 	soc {
+		pmu_gate: pmu-gate {
+			compatible = "sprd,sc9860-pmu-gate";
+			sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
+			clocks = <&ext_26m>;
+			#clock-cells = <1>;
+		};
+
+		pll: pll {
+			compatible = "sprd,sc9860-pll";
+			sprd,syscon = <&ana_regs>; /* 0x40400000 */
+			clocks = <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		ap_clk: clock-controller@20000000 {
+			compatible = "sprd,sc9860-ap-clk";
+			reg = <0 0x20000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_prediv: aon-prediv {
+			compatible = "sprd,sc9860-aon-prediv";
+			reg = <0 0x402d0000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		apahb_gate: apahb-gate {
+			compatible = "sprd,sc9860-apahb-gate";
+			sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_gate: aon-gate {
+			compatible = "sprd,sc9860-aon-gate";
+			sprd,syscon = <&aon_regs>; /* 0x402e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aonsecure_clk: clock-controller@40880000 {
+			compatible = "sprd,sc9860-aonsecure-clk";
+			reg = <0 0x40880000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		agcp_gate: agcp-gate {
+			compatible = "sprd,sc9860-agcp-gate";
+			sprd,syscon = <&agcp_regs>; /* 0x415e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		gpu_clk: clock-controller@60200000 {
+			compatible = "sprd,sc9860-gpu-clk";
+			reg = <0 0x60200000 0 0x400>;
+			clocks = <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_clk: clock-controller@61000000 {
+			compatible = "sprd,sc9860-vsp-clk";
+			reg = <0 0x61000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_gate: vsp-gate {
+			compatible = "sprd,sc9860-vsp-gate";
+			sprd,syscon = <&vsp_regs>; /* 0x61100000 */
+			clocks = <&vsp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_clk: clock-controller@62000000 {
+			compatible = "sprd,sc9860-cam-clk";
+			reg = <0 0x62000000 0 0x4000>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_gate: cam-gate {
+			compatible = "sprd,sc9860-cam-gate";
+			sprd,syscon = <&cam_regs>; /* 0x62100000 */
+			clocks = <&cam_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_clk: clock-controller@63000000 {
+			compatible = "sprd,sc9860-disp-clk";
+			reg = <0 0x63000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_gate: disp-gate {
+			compatible = "sprd,sc9860-disp-gate";
+			sprd,syscon = <&disp_regs>; /* 0x63100000 */
+			clocks = <&disp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		apapb_gate: apapb-gate {
+			compatible = "sprd,sc9860-apapb-gate";
+			sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */
+			clocks = <&ap_clk 0>;
+			#clock-cells = <1>;
+		};
+
 		funnel@10001000 { /* SoC Funnel */
 			compatible = "arm,coresight-funnel", "arm,primecell";
 			reg = <0 0x10001000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 6ea3a75..eb004bb 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -110,6 +110,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
-		clock-output-names = "ext_26m";
+		clock-output-names = "ext-26m";
 	};
 };
-- 
2.7.4

Re: [PATCH V6 01/12] drivers: move clock common macros out from vendor directories

[Stephen Boyd]

On 11/27, Chunyan Zhang wrote:
> These macros are used by more than one SoC vendor platforms, avoid to
> have many copies of these code, this patch moves them to the common
> clock directory which every clock drivers can access to.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
>  drivers/clk/clk_common.h | 60 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 drivers/clk/clk_common.h
> 
> diff --git a/drivers/clk/clk_common.h b/drivers/clk/clk_common.h
> new file mode 100644
> index 0000000..21e93d2
> --- /dev/null
> +++ b/drivers/clk/clk_common.h
> @@ -0,0 +1,60 @@
> +/*
> + * drivers/clk/clk_common.h

We don't need this in the file too. Please remove this line.

> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#ifndef _CLK_COMMON_H_
> +#define _CLK_COMMON_H_
> +
> +#include <linux/clk-provider.h>

Maybe these macros should just go into clk-provider.h?

> +
> +#define CLK_HW_INIT(_name, _parent, _ops, _flags)		\
> +	(&(struct clk_init_data) {				\
> +		.flags		= _flags,			\
> +		.name		= _name,			\
> +		.parent_names	= (const char *[]) { _parent },	\
> +		.num_parents	= 1,				\
> +		.ops		= _ops,				\
> +	})

Hopefully we don't extend the init structure anymore to have
something else. I guess we'll do something if that happens.

> +
> +#define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags)	\
> +	(&(struct clk_init_data) {				\
> +		.flags		= _flags,			\
> +		.name		= _name,			\
> +		.parent_names	= _parents,			\
> +		.num_parents	= ARRAY_SIZE(_parents),		\
> +		.ops		= _ops,				\
> +	})
> +
> +#define CLK_HW_INIT_NO_PARENT(_name, _ops, _flags)     \
> +	(&(struct clk_init_data) {                      \
> +		.flags          = _flags,               \
> +		.name           = _name,                \
> +		.parent_names   = NULL,                 \
> +		.num_parents    = 0,                    \
> +		.ops            = _ops,                 \
> +	})
> +
> +#define CLK_FIXED_FACTOR(_struct, _name, _parent,			\
> +			_div, _mult, _flags)				\
> +	struct clk_fixed_factor _struct = {				\
> +		.div		= _div,					\
> +		.mult		= _mult,				\
> +		.hw.init	= CLK_HW_INIT(_name,			\
> +					      _parent,			\
> +					      &clk_fixed_factor_ops,	\
> +					      _flags),			\
> +	}
> +
> +#define CLK_FIXED_RATE(_struct, _name, _flags,				\
> +		       _fixed_rate, _fixed_accuracy)			\
> +	struct clk_fixed_rate _struct = {				\
> +		.fixed_rate	= _fixed_rate,				\
> +		.fixed_accuracy	= _fixed_accuracy,			\
> +		.hw.init	= CLK_HW_INIT_NO_PARENT(_name,		\
> +					  &clk_fixed_rate_ops,		\
> +							_flags),	\
> +	}

Maybe don't add this one? Usually fixed rate clks come from DT.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V6 02/12] clk: sprd: Add common infrastructure

[Stephen Boyd]

On 11/27, Chunyan Zhang wrote:
> +
> +	sprd_clk_set_regmap(desc, regmap);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(sprd_clk_regmap_init);
> +
> +int sprd_clk_probe(struct device *dev, struct clk_hw_onecell_data *clkhw)
> +{
> +	int i, ret = 0;

ret shouldn't need to be initialized here.

> +	struct clk_hw *hw;
> +
> +	for (i = 0; i < clkhw->num; i++) {
> +
> +		hw = clkhw->hws[i];
> +
> +		if (!hw)
> +			continue;
> +
> +		ret = devm_clk_hw_register(dev, hw);
> +		if (ret) {
> +			dev_err(dev, "Couldn't register clock %d - %s\n",
> +				i, hw->init->name);
> +			return ret;
> +		}
> +	}
> +
> +	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
> +				     clkhw);

You can use devm_ now for this.

> +	if (ret)
> +		dev_err(dev, "Failed to add clock provider.\n");

Please remove the full stop on error messages.

> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(sprd_clk_probe);
> +
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/clk/sprd/common.h b/drivers/clk/sprd/common.h
> new file mode 100644
> index 0000000..8cd774e
> --- /dev/null
> +++ b/drivers/clk/sprd/common.h
> @@ -0,0 +1,52 @@
> +/*
> + * Spreadtrum clock infrastructure
> + *
> + * Copyright (C) 2017 Spreadtrum, Inc.
> + * Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#ifndef _SPRD_CLK_COMMON_H_
> +#define _SPRD_CLK_COMMON_H_
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +
> +#include "../clk_common.h"
> +
> +struct device_node;
> +
> +struct sprd_clk_common {
> +	struct regmap	*regmap;
> +	u32		reg;
> +	struct clk_hw	hw;
> +};
> +
> +struct sprd_clk_desc {
> +	struct sprd_clk_common		**clk_clks;
> +	unsigned long			num_clk_clks;
> +	struct clk_hw_onecell_data      *hw_clks;
> +};
> +
> +#define sprd_regmap_read(map, reg, val)				\
> +({								\
> +	(map) ? regmap_read((map), (reg), (val)) : (-EINVAL);	\

Do we sometimes not have a map? This seems overly cautious.

> +})
> +
> +#define sprd_regmap_write(map, reg, val)			\
> +({								\

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V6 01/12] drivers: move clock common macros out from vendor directories

[Chunyan Zhang]

On 7 December 2017 at 14:47, Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> wrote:
> On 11/27, Chunyan Zhang wrote:
>> These macros are used by more than one SoC vendor platforms, avoid to
>> have many copies of these code, this patch moves them to the common
>> clock directory which every clock drivers can access to.
>>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>> ---
>>  drivers/clk/clk_common.h | 60 ++++++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 60 insertions(+)
>>  create mode 100644 drivers/clk/clk_common.h
>>
>> diff --git a/drivers/clk/clk_common.h b/drivers/clk/clk_common.h
>> new file mode 100644
>> index 0000000..21e93d2
>> --- /dev/null
>> +++ b/drivers/clk/clk_common.h
>> @@ -0,0 +1,60 @@
>> +/*
>> + * drivers/clk/clk_common.h
>
> We don't need this in the file too. Please remove this line.
>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>> +
>> +#ifndef _CLK_COMMON_H_
>> +#define _CLK_COMMON_H_
>> +
>> +#include <linux/clk-provider.h>
>
> Maybe these macros should just go into clk-provider.h?

Ok.  And I will also remove the same macros from sunxi-ng/ccu_common.h
and zte/clk.h.

>
>> +
>> +#define CLK_HW_INIT(_name, _parent, _ops, _flags)            \
>> +     (&(struct clk_init_data) {                              \
>> +             .flags          = _flags,                       \
>> +             .name           = _name,                        \
>> +             .parent_names   = (const char *[]) { _parent }, \
>> +             .num_parents    = 1,                            \
>> +             .ops            = _ops,                         \
>> +     })
>
> Hopefully we don't extend the init structure anymore to have
> something else. I guess we'll do something if that happens.
>
>> +
>> +#define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags)   \
>> +     (&(struct clk_init_data) {                              \
>> +             .flags          = _flags,                       \
>> +             .name           = _name,                        \
>> +             .parent_names   = _parents,                     \
>> +             .num_parents    = ARRAY_SIZE(_parents),         \
>> +             .ops            = _ops,                         \
>> +     })
>> +
>> +#define CLK_HW_INIT_NO_PARENT(_name, _ops, _flags)     \
>> +     (&(struct clk_init_data) {                      \
>> +             .flags          = _flags,               \
>> +             .name           = _name,                \
>> +             .parent_names   = NULL,                 \
>> +             .num_parents    = 0,                    \
>> +             .ops            = _ops,                 \
>> +     })
>> +
>> +#define CLK_FIXED_FACTOR(_struct, _name, _parent,                    \
>> +                     _div, _mult, _flags)                            \
>> +     struct clk_fixed_factor _struct = {                             \
>> +             .div            = _div,                                 \
>> +             .mult           = _mult,                                \
>> +             .hw.init        = CLK_HW_INIT(_name,                    \
>> +                                           _parent,                  \
>> +                                           &clk_fixed_factor_ops,    \
>> +                                           _flags),                  \
>> +     }
>> +
>> +#define CLK_FIXED_RATE(_struct, _name, _flags,                               \
>> +                    _fixed_rate, _fixed_accuracy)                    \
>> +     struct clk_fixed_rate _struct = {                               \
>> +             .fixed_rate     = _fixed_rate,                          \
>> +             .fixed_accuracy = _fixed_accuracy,                      \
>> +             .hw.init        = CLK_HW_INIT_NO_PARENT(_name,          \
>> +                                       &clk_fixed_rate_ops,          \
>> +                                                     _flags),        \
>> +     }
>
> Maybe don't add this one? Usually fixed rate clks come from DT.

Ok, will also move the fixed rate clks from our driver to DT.

Thanks,
Chunyan

>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html