From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: [PATCH 04/12] dt-bindings: mtd: remove pxa3xx NAND controller documentation Date: Thu, 7 Dec 2017 21:18:06 +0100 Message-ID: <20171207201814.30411-5-miquel.raynal@free-electrons.com> References: <20171207201814.30411-1-miquel.raynal@free-electrons.com> Return-path: In-Reply-To: <20171207201814.30411-1-miquel.raynal-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Cyrille Pitchen , Rob Herring , Mark Rutland , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Russell King , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Eric Miao , Catalin Marinas Cc: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Thomas Petazzoni , Antoine Tenart , Nadav Haklai , Miquel Raynal , Ofer Heifetz , Hanna Hawa , Neta Zur Hershkovits List-Id: devicetree@vger.kernel.org The deprecated pxa3xx_nand.c driver does not exist anymore, it has been replaced by marvell_nand.c which has its own up-to-date documentation. Signed-off-by: Miquel Raynal --- .../devicetree/bindings/mtd/pxa3xx-nand.txt | 50 ---------------------- 1 file changed, 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt deleted file mode 100644 index d4ee4da58463..000000000000 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ /dev/null @@ -1,50 +0,0 @@ -PXA3xx NAND DT bindings - -Required properties: - - - compatible: Should be set to one of the following: - marvell,pxa3xx-nand - marvell,armada370-nand - marvell,armada-8k-nand - - reg: The register base for the controller - - interrupts: The interrupt to map - - #address-cells: Set to <1> if the node includes partitions - - marvell,system-controller: Set to retrieve the syscon node that handles - NAND controller related registers (only required - with marvell,armada-8k-nand compatible). - -Optional properties: - - - dmas: dma data channel, see dma.txt binding doc - - marvell,nand-enable-arbiter: Set to enable the bus arbiter - - marvell,nand-keep-config: Set to keep the NAND controller config as set - by the bootloader - - num-cs: Number of chipselect lines to use - - nand-on-flash-bbt: boolean to enable on flash bbt option if - not present false - - nand-ecc-strength: number of bits to correct per ECC step - - nand-ecc-step-size: number of data bytes covered by a single ECC step - -The following ECC strength and step size are currently supported: - - - nand-ecc-strength = <1>, nand-ecc-step-size = <512> - - nand-ecc-strength = <4>, nand-ecc-step-size = <512> - - nand-ecc-strength = <8>, nand-ecc-step-size = <512> - -Example: - - nand0: nand@43100000 { - compatible = "marvell,pxa3xx-nand"; - reg = <0x43100000 90>; - interrupts = <45>; - dmas = <&pdma 97 0>; - dma-names = "data"; - #address-cells = <1>; - - marvell,nand-enable-arbiter; - marvell,nand-keep-config; - num-cs = <1>; - - /* partitions (optional) */ - }; - -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html