From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joel Stanley Subject: [PATCH 19/20] ARM: dts: aspeed-romulus: Update Romulus system Date: Mon, 11 Dec 2017 15:37:03 +1030 Message-ID: <20171211050704.20621-20-joel@jms.id.au> References: <20171211050704.20621-1-joel@jms.id.au> Return-path: In-Reply-To: <20171211050704.20621-1-joel@jms.id.au> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Mark Rutland , Arnd Bergmann , Andrew Jeffery , Patrick Venture , Xo Wang , Lei YU Cc: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= , Benjamin Herrenschmidt , Jeremy Kerr , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org List-Id: devicetree@vger.kernel.org - Fix incorrect RAM size - Remove alias; these are now specified in the dtsi - Add newly upstreamed devices - Include OpenBMC flash layout Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 155 +++++++++++++++++++++++++-- 1 file changed, 149 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 8067793129ea..bfdf643584df 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "aspeed-g5.dtsi" @@ -7,17 +7,13 @@ model = "Romulus BMC"; compatible = "ibm,romulus-bmc", "aspeed,ast2500"; - aliases { - serial4 = &uart5; - }; - chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; }; memory { - reg = <0x80000000 0x40000000>; + reg = <0x80000000 0x20000000>; }; reserved-memory { @@ -29,6 +25,73 @@ no-map; reg = <0xbf000000 0x01000000>; /* 16M */ }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + }; + + power { + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; }; }; @@ -38,6 +101,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; +#include "openbmc-flash-layout.dtsi" }; }; @@ -53,6 +117,12 @@ }; }; +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + &uart1 { /* Rear RS-232 connector */ status = "okay"; @@ -81,6 +151,10 @@ pinctrl-0 = <&pinctrl_rmii1_default>; }; +&i2c1 { + status = "okay"; +}; + &i2c2 { status = "okay"; }; @@ -133,8 +207,77 @@ &i2c12 { status = "okay"; + + max31785@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; +}; + +&gpio { + nic_func_mode0 { + gpio-hog; + gpios = ; + output-low; + line-name = "nic_func_mode0"; + }; + nic_func_mode1 { + gpio-hog; + gpios = ; + output-low; + line-name = "nic_func_mode1"; + }; }; &vuart { status = "okay"; }; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@4 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@5 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@6 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; +}; -- 2.14.1