From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel RAYNAL Subject: Re: [PATCH 02/12] mtd: nand: add reworked Marvell NAND controller driver Date: Mon, 11 Dec 2017 17:55:06 +0100 Message-ID: <20171211175506.0b8ea4d1@xps13> References: <20171207201814.30411-1-miquel.raynal@free-electrons.com> <20171207201814.30411-3-miquel.raynal@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Ezequiel Garcia Cc: David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Cyrille Pitchen , Rob Herring , Mark Rutland , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Russell King , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Eric Miao , Catalin Marinas List-Id: devicetree@vger.kernel.org On Mon, 11 Dec 2017 13:27:30 -0300 Ezequiel Garcia wrote: > On 7 December 2017 at 17:18, Miquel Raynal > wrote: > > Add marvell_nand driver which aims at replacing the existing > > pxa3xx_nand driver. > > > > The new driver intends to be easier to understand and follows the > > brand new NAND framework rules by implementing hooks for every > > pattern the controller might support and referencing them inside a > > parser object that will be given to the core at each ->exec_op() > > call. > > > > Raw accessors are implemented, useful to test/debug > > memory/filesystem corruptions. Userspace binaries contained in the > > mtd-utils package may now be used and their output trusted. > > > > Timings may not be kept from the bootloader anymore, the timings > > used for instance in U-Boot were not optimal and it supposed to > > have NAND support (and initialized) in the bootloader. > > > > Thanks to the improved timings, implementation of ONFI mode 5 > > support (with EDO managed by adding a delay on data sampling), > > merging the commands together and optimizing writes in the command > > registers, the new driver may achieve faster throughputs in both > > directions. Measurements show an improvement of about +23% read > > throughput and +24% write throughput. These measurements have been > > done with an Armada-385-DB-AP (4kiB NAND pages forced in 4-bit > > strength BCH ECC correction) using the userspace tool 'flash_speed' > > from the MTD test suite. > > > > Besides these important topics, the new driver addresses several > > unsolved known issues in the old driver which: > > - did not work with ECC soft neither with ECC none ; > > - relied on naked read/write (which is unchanged) while the NFCv1 > > embedded in the pxa3xx platforms do not implement it, so several > > NAND commands did not actually ever work without any notice (like > > reading the ONFI PARAM_PAGE or SET/GET_FEATURES) ; > > - wrote the OOB data correctly, but was not able to read it > > correctly past the first OOB data chunk ; > > - did not displayed ECC bytes ; > > - used device tree bindings that did not allow more than one NAND > > chip, and did not allow to choose the correct chip select if not > > incrementing from 0. Plus, the Ready/Busy line used had to be 0. > > > > Old device tree bindings are still supported but deprecated. A more > > hierarchical view has to be used to keep the controller and the NAND > > chip structures clearly separated both inside the device tree and > > also in the driver code. > > > > So, is this driver fully compatible with the current pxa3xx-nand > driver? It should be! > > Have you tested with U-Boot's driver (based on the pxa3xx-nand)? > > I recally some subtle issues with the fact that U-Boot and Linux had > to agree about the BBT format. I kept the pxa3xx_nand driver BBT format. This is something I mistakenly omitted from the commit message: There are 5 supported layouts in the driver (the same as withing the pxa3xx_nand driver): 1/ Page: 512B, strength 1b/512B (hamming) 2/ Page: 2kiB, strength 4b/2kiB (hamming) 3/ page: 2kiB, strength 16b/2kiB (BCH) 4/ page: 4kiB, strength 16b/2kiB (BCH) 5/ page: 4kiB, strength 32b/2kiB (BCH) Layout 2 has been tested with CM_X300 compulab module (PXA SoC) with and without DMA. Layout 4 has been tested with an Armada 385 db, an Armada 7040 DB and an Armada 8040 DB. Layout 5 has been tested with an Armada 398 db. Layout 1 has been tested with the Armada 385 db with some hacks. Layout 3 has been tested with the Armada 385 db with some other hacks, that is why I am concerned about the other thread on the MTD mailing list "wait timeout when scanning for BB" where a 2kiB page with 16b/2048B strength is in use. Regards, Miquèl -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html