From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH RFC 2/7] soc: qcom: Add device tree binding for GENI SE Date: Tue, 2 Jan 2018 09:46:29 -0600 Message-ID: <20180102154629.s6rni5r3big2g5sv@rob-hp-laptop> References: <1514392046-30602-1-git-send-email-kramasub@codeaurora.org> <1514392046-30602-3-git-send-email-kramasub@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1514392046-30602-3-git-send-email-kramasub@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org To: Karthikeyan Ramasubramanian Cc: linux-arm-msm@vger.kernel.org, linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org, andy.gross@linaro.org, david.brown@linaro.org, mark.rutland@arm.com, corbet@lwn.net, wsa@the-dreams.de, gregkh@linuxfoundation.org, jslaby@suse.com List-Id: devicetree@vger.kernel.org On Wed, Dec 27, 2017 at 09:27:21AM -0700, Karthikeyan Ramasubramanian wrote: > Add device tree binding support for the QCOM GENI SE driver. > > Signed-off-by: Karthikeyan Ramasubramanian > --- > .../devicetree/bindings/soc/qcom/qcom,geni-se.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt > new file mode 100644 > index 0000000..5108b62 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt > @@ -0,0 +1,15 @@ > +Qualcomm Technologies, Inc. GENI Serial Engine Driver > + > +GENI Serial Engine Driver manages the GENI firmware based Qualcomm Universal > +Peripheral (QUP) Wrapper. GENI SE Driver also manages the common aspects of > +individual Serial Engines that composes the QUP Wrapper. Bindings describe h/w, not drivers. > + > +Required properties: > +- compatible: Must be "qcom,geni-se-qup". Only one version of the h/w? > +- reg: Must contain QUP register address and length. > + > +Example: > + qup_0: qcom,geni_se_qup_0@8c0000 { Don't use '_' in node names. > + compatible = "qcom,geni-se-qup"; > + reg = <0x8c0000 0x6000>; > + } > -- > Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >