From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: [PATCH 0/3] Support qcom pinctrl protected pins Date: Tue, 9 Jan 2018 17:58:45 -0800 Message-ID: <20180110015848.11480-1-sboyd@codeaurora.org> Return-path: Sender: linux-arm-msm-owner@vger.kernel.org To: Linus Walleij Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Timur Tabi , Andy Shevchenko , Bjorn Andersson , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org This patchset proposes a solution to describing the valid pins for a pin controller in a semi-generic way so that qcom platforms can expose the pins that are really available. Typically, this has been done by having drivers and firmware descriptions only use pins they know they have access to, and that still works now because we no longer read the pin direction at boot. But there are still some userspace drivers and debugfs facilities that don't know what pins are available and attempt to read everything they can. On qcom platforms, this may lead to a system hang, which isn't very nice behavior, even if root is the only user that can trigger it. The proposal is to describe the valid pins and then not allow things to cause problems by using the invalid pins. Obviously, the firmware may mess this up, so this is mostly a nice to have feature or a safety net so that things don't blow up easily. Stephen Boyd (3): gpiolib: Export gpiochip_irqchip_irq_valid() to drivers dt-bindings: pinctrl: Add a ngpios-ranges property pinctrl: qcom: Don't allow protected pins to be requested .../bindings/pinctrl/qcom,msm8996-pinctrl.txt | 6 ++ drivers/gpio/gpiolib.c | 5 +- drivers/pinctrl/qcom/pinctrl-msm.c | 98 +++++++++++++++++++++- include/linux/gpio/driver.h | 3 + 4 files changed, 106 insertions(+), 6 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project