devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/2] Input: Add Cypress Gen5 Touchscreen driver
@ 2017-12-01 15:39 Mylène Josserand
  2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
  2017-12-01 15:39 ` [PATCH v4 2/2] dt-bindings: input: Add documentation for cyttsp5 Mylène Josserand
  0 siblings, 2 replies; 14+ messages in thread
From: Mylène Josserand @ 2017-12-01 15:39 UTC (permalink / raw)
  To: dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8
  Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-input-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
	thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8

Hi everyone,

Here is a V4 series to add the driver of the touchscreen Cypress,
TrueTouch Generation 5.
Based on last master branch of "input" kernel's tree, last commit c1b433e04ef9.

This touchscreen is similar to Cypress generation 4 but the
registers are different.

This driver uses regmap as it is possible to use I2C or SPI
busses. Currently, only the I2C support are available in the driver.
This touchscreen can handle some multitouch events as buttons using
some defined zones. That is why the driver handles buttons and
multitouch events.

Changes since v3:
   - Rebased on last input's branch
   - Changed the CRC table to use crc_itu_t_table instead of
   crc_ccitt_false_table which is not merged.
   - Added selection of CRC_ITU_T on KConfig
Changes since v2:
   - Removed pinctrl in dt-binding example which is uncessecary.
   - Added Acked-by and Reviewed-by received.
Changes since v1:
   - Updated the driver according to reviews. Most important modifications:
   removed unnecessary mutex, updated dev_err output, handled return cases
   in a better way, created a HID_ENUM, removed magic value, used an
   existing CRC table and used "linux-keycodes" instead of sub-nodes.
   - Updated the dt-bindings to use linux-keycodes and removed properties'
   description that comes from touchscreen's binding.

Patch 01: Add the basis of the driver for Cypress Gen5 Touchscreen.
Patch 02: Add the binding documentation for this driver.

If you have any remarks, let me know.

Thank you in advance,
Mylène

Mylène Josserand (2):
  Input: Add driver for Cypress Generation 5 touchscreen
  dt-bindings: input: Add documentation for cyttsp5

 .../bindings/input/touchscreen/cypress,cyttsp5.txt |   39 +
 drivers/input/touchscreen/Kconfig                  |   16 +
 drivers/input/touchscreen/Makefile                 |    1 +
 drivers/input/touchscreen/cyttsp5.c                | 1110 ++++++++++++++++++++
 4 files changed, 1166 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.txt
 create mode 100644 drivers/input/touchscreen/cyttsp5.c

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
  2017-12-01 15:39 [PATCH v4 0/2] Input: Add Cypress Gen5 Touchscreen driver Mylène Josserand
@ 2017-12-01 15:39 ` Mylène Josserand
  2017-12-03 14:29   ` [PATCH] Input: fix platform_no_drv_owner.cocci warnings kbuild test robot
                     ` (5 more replies)
  2017-12-01 15:39 ` [PATCH v4 2/2] dt-bindings: input: Add documentation for cyttsp5 Mylène Josserand
  1 sibling, 6 replies; 14+ messages in thread
From: Mylène Josserand @ 2017-12-01 15:39 UTC (permalink / raw)
  To: dmitry.torokhov, robh+dt, mark.rutland
  Cc: linux-kernel, linux-input, devicetree, mylene.josserand,
	thomas.petazzoni, maxime.ripard

This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
controllers. This driver supports only the I2C bus but it uses regmap
so SPI support could be added later.
The touchscreen can retrieve some defined zone that are handled as
buttons (according to the hardware). That is why it handles
button and multitouch events.

Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 drivers/input/touchscreen/Kconfig   |   16 +
 drivers/input/touchscreen/Makefile  |    1 +
 drivers/input/touchscreen/cyttsp5.c | 1110 +++++++++++++++++++++++++++++++++++
 3 files changed, 1127 insertions(+)
 create mode 100644 drivers/input/touchscreen/cyttsp5.c

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 0cfdb7cb610e..28eea6d5f1bb 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -238,6 +238,22 @@ config TOUCHSCREEN_CYTTSP4_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called cyttsp4_spi.
 
+config TOUCHSCREEN_CYTTSP5
+	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
+	depends on OF
+	select REGMAP_I2C
+	select CRC_ITU_T
+	help
+	  Driver for Parade TrueTouch Standard Product
+	  Generation 5 touchscreen controllers.
+	  I2C bus interface support only.
+
+	  Say Y here if you have a Cypress Gen5 touchscreen.
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp5.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index d2a2b3b7af27..e7d124901dd9 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP5)	+= cyttsp5.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
new file mode 100644
index 000000000000..a41feea2cd5a
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp5.c
@@ -0,0 +1,1110 @@
+/*
+ * Parade TrueTouch(TM) Standard Product V5 Module.
+ * For use with Parade touchscreen controllers.
+ *
+ * Copyright (C) 2015 Parade Technologies
+ * Copyright (C) 2012-2015 Cypress Semiconductor
+ * Copyright (C) 2017 Free Electrons
+ *
+ * Author: Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/crc-itu-t.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define CYTTSP5_NAME				"cyttsp5"
+#define CY_I2C_DATA_SIZE			(2 * 256)
+#define HID_VERSION				0x0100
+#define CY_MAX_INPUT				512
+#define CYTTSP5_PREALLOCATED_CMD_BUFFER	32
+#define CY_BITS_PER_BTN			1
+#define CY_NUM_BTN_EVENT_ID			((1 << CY_BITS_PER_BTN) - 1)
+
+#define MAX_AREA				255
+#define HID_OUTPUT_BL_SOP			0x1
+#define HID_OUTPUT_BL_EOP			0x17
+#define HID_OUTPUT_BL_LAUNCH_APP		0x3B
+#define HID_OUTPUT_BL_LAUNCH_APP_SIZE		11
+#define HID_OUTPUT_GET_SYSINFO			0x2
+#define HID_OUTPUT_GET_SYSINFO_SIZE		5
+
+#define HID_DESC_REG				0x1
+#define HID_INPUT_REG				0x3
+#define HID_OUTPUT_REG				0x4
+
+#define REPORT_ID_TOUCH			0x1
+#define REPORT_ID_BTN				0x3
+#define REPORT_SIZE_5				5
+#define REPORT_SIZE_8				8
+#define REPORT_SIZE_16				16
+
+/* Touch reports offsets */
+/* Header offsets */
+#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT	16
+/* Record offsets */
+#define TOUCH_REPORT_DESC_CONTACTID		8
+#define TOUCH_REPORT_DESC_X			16
+#define TOUCH_REPORT_DESC_Y			32
+#define TOUCH_REPORT_DESC_P			48
+#define TOUCH_REPORT_DESC_MAJ			56
+#define TOUCH_REPORT_DESC_MIN			64
+
+/* HID */
+#define HID_TOUCH_REPORT_ID			0x1
+#define HID_BTN_REPORT_ID			0x3
+#define HID_APP_RESPONSE_REPORT_ID		0x1F
+#define HID_APP_OUTPUT_REPORT_ID		0x2F
+#define HID_BL_RESPONSE_REPORT_ID		0x30
+#define HID_BL_OUTPUT_REPORT_ID		0x40
+
+#define HID_OUTPUT_RESPONSE_REPORT_OFFSET	2
+#define HID_OUTPUT_RESPONSE_CMD_OFFSET		4
+#define HID_OUTPUT_RESPONSE_CMD_MASK		0x7F
+
+#define HID_SYSINFO_SENSING_OFFSET		33
+#define HID_SYSINFO_BTN_OFFSET			48
+#define HID_SYSINFO_BTN_MASK			0xFF
+#define HID_SYSINFO_MAX_BTN			8
+
+/*  Timeout in ms */
+#define CY_HID_OUTPUT_TIMEOUT			200
+#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT	3000
+#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT	4000
+
+/* maximum number of concurrent tracks */
+#define TOUCH_REPORT_SIZE			10
+#define TOUCH_INPUT_HEADER_SIZE		7
+#define BTN_REPORT_SIZE			9
+#define BTN_INPUT_HEADER_SIZE			5
+
+/* All usage pages for Touch Report */
+#define TOUCH_REPORT_USAGE_PG_X		0x00010030
+#define TOUCH_REPORT_USAGE_PG_Y		0x00010031
+#define TOUCH_REPORT_USAGE_PG_P		0x000D0030
+#define TOUCH_REPORT_USAGE_PG_CONTACTID	0x000D0051
+#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT	0x000D0054
+#define TOUCH_REPORT_USAGE_PG_MAJ		0xFF010062
+#define TOUCH_REPORT_USAGE_PG_MIN		0xFF010063
+#define TOUCH_COL_USAGE_PG			0x000D0022
+
+/* helpers */
+#define HI_BYTE(x)				(u8)(((x) >> 8) & 0xFF)
+#define LOW_BYTE(x)				(u8)((x) & 0xFF)
+
+/* System Information interface definitions */
+struct cyttsp5_sensing_conf_data_dev {
+	u8 electrodes_x;
+	u8 electrodes_y;
+	__le16 len_x;
+	__le16 len_y;
+	__le16 res_x;
+	__le16 res_y;
+	__le16 max_z;
+	u8 origin_x;
+	u8 origin_y;
+	u8 btn;
+	u8 scan_mode;
+	u8 max_num_of_tch_per_refresh_cycle;
+} __packed;
+
+struct cyttsp5_sensing_conf_data {
+	u16 res_x;
+	u16 res_y;
+	u16 max_z;
+	u16 len_x;
+	u16 len_y;
+	u8 origin_x;
+	u8 origin_y;
+	u8 max_tch;
+};
+
+enum { HID_CMD_DONE, HID_CMD_BUSY } hid_cmd_state;
+
+enum cyttsp5_tch_abs {	/* for ordering within the extracted touch data array */
+	CY_TCH_X,	/* X */
+	CY_TCH_Y,	/* Y */
+	CY_TCH_P,	/* P (Z) */
+	CY_TCH_T,	/* TOUCH ID */
+	CY_TCH_MAJ,	/* TOUCH_MAJOR */
+	CY_TCH_MIN,	/* TOUCH_MINOR */
+	CY_TCH_NUM_ABS,
+};
+
+struct cyttsp5_tch_abs_params {
+	size_t ofs;	/* abs byte offset */
+	size_t size;	/* size in bits */
+	size_t min;	/* min value */
+	size_t max;	/* max value */
+	size_t bofs;	/* bit offset */
+};
+
+struct cyttsp5_touch {
+	int hdr;
+	int abs[CY_TCH_NUM_ABS];
+};
+
+struct cyttsp5_sysinfo {
+	struct cyttsp5_sensing_conf_data sensing_conf_data;
+	int num_btns;
+	struct cyttsp5_tch_abs_params tch_hdr;
+	struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
+	u32 key_code[HID_SYSINFO_MAX_BTN];
+	u8 *xy_mode;
+	u8 *xy_data;
+};
+
+struct cyttsp5_hid_desc {
+	__le16 hid_desc_len;
+	u8 packet_id;
+	u8 reserved_byte;
+	__le16 bcd_version;
+	__le16 report_desc_len;
+	__le16 report_desc_register;
+	__le16 input_register;
+	__le16 max_input_len;
+	__le16 output_register;
+	__le16 max_output_len;
+	__le16 command_register;
+	__le16 data_register;
+	__le16 vendor_id;
+	__le16 product_id;
+	__le16 version_id;
+	u8 reserved[4];
+} __packed;
+
+struct cyttsp5 {
+	struct device *dev;
+	struct mutex system_lock;
+	wait_queue_head_t wait_q;
+	struct cyttsp5_sysinfo sysinfo;
+	int hid_cmd_state;
+	struct cyttsp5_hid_desc hid_desc;
+	u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER];
+	u8 input_buf[CY_MAX_INPUT];
+	u8 response_buf[CY_MAX_INPUT];
+	struct gpio_desc *reset_gpio;
+	struct input_dev *input;
+	char phys[NAME_MAX];
+	int num_prv_rec;
+	struct regmap *regmap;
+};
+
+/*
+ * For what understood in the datasheet, the register does not
+ * matter. For consistency, used the Input Register address
+ * but it does mean anything to the device. The important data
+ * to send is the I2C address
+ */
+static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max)
+{
+	int rc;
+	u32 size;
+	u8 temp[2];
+
+	if (!buf)
+		return -EINVAL;
+
+	/* Read the frame to retrieve the size */
+	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, 2);
+	if (rc < 0)
+		return rc;
+
+	size = get_unaligned_le16(temp);
+	if (!size || size == 2)
+		return 0;
+
+	if (size > max)
+		return -EINVAL;
+
+	/* Get the real value */
+	return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size);
+}
+
+static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
+			 size_t size)
+{
+	u8 cmd[size + 1];
+
+	/* High bytes of register address needed as first byte of cmd */
+	cmd[0] = HI_BYTE(reg);
+
+	/* Copy the rest of the data */
+	if (data)
+		memcpy(&cmd[1], data, size);
+
+	/* The hardware wants to receive a frame with the address register
+	 * contains in the first two bytes. As the regmap_write function
+	 * add the register adresse in the frame, we use the LOW_BYTE as
+	 * first frame byte for the address register and the first
+	 * data byte is the high register + left of the cmd to send
+	 */
+	return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
+}
+
+static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
+			       unsigned long *ids)
+{
+	int t;
+
+	for (t = 0; t < max_slots; t++) {
+		if (test_bit(t, ids))
+			continue;
+		input_mt_slot(input, t);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+	}
+
+	input_sync(input);
+}
+
+static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
+{
+	int t;
+
+	if (ts->num_prv_rec == 0)
+		return;
+
+	for (t = 0; t < max_slots; t++) {
+		input_mt_slot(ts->input, t);
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
+	}
+}
+
+static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
+{
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int max = si->tch_abs[CY_TCH_T].max;
+
+	if (ts->num_prv_rec != 0) {
+		cyttsp5_report_slot_liftoff(ts, max);
+		input_sync(ts->input);
+		ts->num_prv_rec = 0;
+	}
+}
+
+static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
+				   int bofs)
+{
+	int nbyte;
+	int next;
+
+	for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
+		*axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
+
+	*axis &= max - 1;
+}
+
+static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
+				     struct cyttsp5_touch *touch, u8 *xy_data)
+{
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	enum cyttsp5_tch_abs abs;
+
+	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
+		cyttsp5_get_touch_axis(&touch->abs[abs],
+				       si->tch_abs[abs].size,
+				       si->tch_abs[abs].max,
+				       xy_data + si->tch_abs[abs].ofs,
+				       si->tch_abs[abs].bofs);
+	}
+}
+
+static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
+				   struct cyttsp5_touch *tch, int num_cur_tch)
+{
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int i, t = 0;
+	DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
+	u8 *tch_addr;
+	int tmp;
+
+	bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
+	memset(tch->abs, 0, sizeof(tch->abs));
+
+	for (i = 0; i < num_cur_tch; i++) {
+		tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
+		cyttsp5_get_touch_record(ts, tch, tch_addr);
+
+		/* Convert MAJOR/MINOR from mm to resolution */
+		tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
+		tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
+		tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
+		tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
+
+		t = tch->abs[CY_TCH_T];
+		input_mt_slot(ts->input, t);
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+		__set_bit(t, ids);
+
+		/* position and pressure fields */
+		input_report_abs(ts->input, ABS_MT_POSITION_X,
+				 tch->abs[CY_TCH_X]);
+		input_report_abs(ts->input, ABS_MT_POSITION_Y,
+				 tch->abs[CY_TCH_Y]);
+		input_report_abs(ts->input, ABS_MT_PRESSURE,
+				 tch->abs[CY_TCH_P]);
+
+		/* Get the extended touch fields */
+		input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
+				 tch->abs[CY_TCH_MAJ]);
+		input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
+				 tch->abs[CY_TCH_MIN]);
+	}
+
+	cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
+
+	ts->num_prv_rec = num_cur_tch;
+}
+
+/* read xy_data for all current touches */
+static int cyttsp5_xy_worker(struct cyttsp5 *ts)
+{
+	struct device *dev = ts->dev;
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int max_tch = si->sensing_conf_data.max_tch;
+	struct cyttsp5_touch tch;
+	u8 num_cur_tch;
+
+	cyttsp5_get_touch_axis(&tch.hdr, si->tch_hdr.size,
+			       si->tch_hdr.max,
+			       si->xy_mode + 3 + si->tch_hdr.ofs,
+			       si->tch_hdr.bofs);
+
+	num_cur_tch = tch.hdr;
+	if (num_cur_tch > max_tch) {
+		dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch);
+		num_cur_tch = max_tch;
+	}
+
+	if (num_cur_tch == 0 && ts->num_prv_rec == 0)
+		return 0;
+
+	/* extract xy_data for all currently reported touches */
+	if (num_cur_tch)
+		cyttsp5_get_mt_touches(ts, &tch, num_cur_tch);
+	else
+		cyttsp5_mt_lift_all(ts);
+
+	return 0;
+}
+
+static int cyttsp5_mt_attention(struct device *dev)
+{
+	struct cyttsp5 *ts = dev_get_drvdata(dev);
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int rc;
+
+	if (si->xy_mode[2] != HID_TOUCH_REPORT_ID)
+		return 0;
+
+	/* core handles handshake */
+	rc = cyttsp5_xy_worker(ts);
+	if (rc < 0)
+		dev_err(dev, "xy_worker error r=%d\n", rc);
+
+	return rc;
+}
+
+static int cyttsp5_setup_input_device(struct device *dev)
+{
+	struct cyttsp5 *ts = dev_get_drvdata(dev);
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int max_x, max_y, max_p;
+	int max_x_tmp, max_y_tmp;
+	int rc;
+
+	__set_bit(EV_ABS, ts->input->evbit);
+	__set_bit(EV_REL, ts->input->evbit);
+	__set_bit(EV_KEY, ts->input->evbit);
+
+	max_x_tmp = si->sensing_conf_data.res_x;
+	max_y_tmp = si->sensing_conf_data.res_y;
+	max_x = max_y_tmp - 1;
+	max_y = max_x_tmp - 1;
+	max_p = si->sensing_conf_data.max_z;
+
+	input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);
+
+	__set_bit(ABS_MT_POSITION_X, ts->input->absbit);
+	__set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
+	__set_bit(ABS_MT_PRESSURE, ts->input->absbit);
+
+	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
+
+	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
+
+	rc = input_register_device(ts->input);
+	if (rc < 0)
+		dev_err(dev, "Error, failed register input device r=%d\n", rc);
+
+	return rc;
+}
+
+#ifdef CONFIG_OF
+static int cyttsp5_parse_dt_key_code(struct device *dev)
+{
+	struct cyttsp5 *ts = dev_get_drvdata(dev);
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	struct device_node *np;
+	int i;
+
+	np = dev->of_node;
+	if (!np)
+		return -EINVAL;
+
+	if (!si->num_btns)
+		return 0;
+
+	/* Initialize the button to RESERVED */
+	for (i = 0; i < si->num_btns; i++)
+		si->key_code[i] = KEY_RESERVED;
+
+	return of_property_read_u32_array(np, "linux,keycodes",
+				   si->key_code, si->num_btns);
+}
+#else
+static int cyttsp5_parse_dt_key_code(struct device *dev)
+{
+	struct cyttsp5 *ts = dev_get_drvdata(dev);
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int i;
+
+	if (!si->num_btns)
+		return 0;
+
+	/* Initialize the button to RESERVED */
+	for (i = 0; i < si->num_btns; i++)
+		si->key_code[i] = KEY_RESERVED;
+
+	return 0;
+}
+#endif
+
+static int cyttsp5_btn_attention(struct device *dev)
+{
+	struct cyttsp5 *ts = dev_get_drvdata(dev);
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int cur_btn;
+	int cur_btn_state;
+
+	if (si->xy_mode[2] != HID_BTN_REPORT_ID || !si->num_btns)
+		return 0;
+
+	/* extract button press/release touch information */
+	for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) {
+		/* Get current button state */
+		cur_btn_state = (si->xy_data[0] >> (cur_btn * CY_BITS_PER_BTN))
+			& CY_NUM_BTN_EVENT_ID;
+
+		input_report_key(ts->input, si->key_code[cur_btn],
+				 cur_btn_state);
+		input_sync(ts->input);
+	}
+
+	return 0;
+}
+
+static u16 cyttsp5_compute_crc(u8 *buf, u32 size)
+{
+	u16 remainder = 0xFFFF;
+	u16 xor_mask = 0x0000;
+	u32 index;
+	u32 byte_value;
+	u32 table_index;
+	u32 crc_bit_width = sizeof(u16) * 8;
+
+	/* Divide the message by polynomial, via the table. */
+	for (index = 0; index < size; index++) {
+		byte_value = buf[index];
+		table_index = ((byte_value >> 4) & 0x0F)
+			^ (remainder >> (crc_bit_width - 4));
+		remainder = crc_itu_t_table[table_index]
+			^ (remainder << 4);
+		table_index = (byte_value & 0x0F)
+			^ (remainder >> (crc_bit_width - 4));
+		remainder = crc_itu_t_table[table_index]
+			^ (remainder << 4);
+	}
+
+	/* Perform the final remainder CRC. */
+	return remainder ^ xor_mask;
+}
+
+static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code)
+{
+	u16 size, crc;
+	u8 status, offset;
+	int command_code;
+
+	size = get_unaligned_le16(&ts->response_buf[0]);
+
+	if (!size)
+		return 0;
+
+	offset = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET];
+
+	if (offset == HID_BL_RESPONSE_REPORT_ID) {
+		if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) {
+			dev_err(ts->dev, "HID output response, wrong SOP\n");
+			return -EPROTO;
+		}
+
+		if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) {
+			dev_err(ts->dev, "HID output response, wrong EOP\n");
+			return -EPROTO;
+		}
+
+		crc = cyttsp5_compute_crc(&ts->response_buf[4], size - 7);
+		if (ts->response_buf[size - 3] != LOW_BYTE(crc) ||
+		    ts->response_buf[size - 2] != HI_BYTE(crc)) {
+			dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n",
+				crc);
+			return -EPROTO;
+		}
+
+		status = ts->response_buf[5];
+		if (status) {
+			dev_err(ts->dev, "HID output response, ERROR:%d\n",
+				status);
+			return -EPROTO;
+		}
+	}
+
+	if (offset == HID_APP_RESPONSE_REPORT_ID) {
+		command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET]
+			& HID_OUTPUT_RESPONSE_CMD_MASK;
+		if (command_code != code) {
+			dev_err(ts->dev,
+				"HID output response, wrong command_code:%X\n",
+				command_code);
+			return -EPROTO;
+		}
+	}
+
+	return 0;
+}
+
+static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts)
+{
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+	int i;
+	unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET]
+		& HID_SYSINFO_BTN_MASK;
+
+	si->num_btns = 0;
+	for (i = 0; i < HID_SYSINFO_MAX_BTN; i++) {
+		if (btns & BIT(i))
+			si->num_btns++;
+	}
+}
+
+static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts)
+{
+	struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data;
+	struct cyttsp5_sensing_conf_data_dev *scd_dev =
+		(struct cyttsp5_sensing_conf_data_dev *)
+		&ts->response_buf[HID_SYSINFO_SENSING_OFFSET];
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+
+	cyttsp5_si_get_btn_data(ts);
+
+	scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle;
+	scd->res_x = get_unaligned_le16(&scd_dev->res_x);
+	scd->res_y = get_unaligned_le16(&scd_dev->res_y);
+	scd->max_z = get_unaligned_le16(&scd_dev->max_z);
+	scd->len_x = get_unaligned_le16(&scd_dev->len_x);
+	scd->len_y = get_unaligned_le16(&scd_dev->len_y);
+
+	si->xy_data = devm_kzalloc(ts->dev, scd->max_tch * TOUCH_REPORT_SIZE,
+				   GFP_KERNEL);
+	if (!si->xy_data)
+		return -ENOMEM;
+
+	si->xy_mode = devm_kzalloc(ts->dev, TOUCH_INPUT_HEADER_SIZE,
+				   GFP_KERNEL);
+	if (!si->xy_mode)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts)
+{
+	int rc;
+	u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE];
+
+	ts->hid_cmd_state = HID_CMD_BUSY;
+
+	/* HI bytes of Output register address */
+	cmd[0] = LOW_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
+	cmd[1] = HI_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
+	cmd[2] = HID_APP_OUTPUT_REPORT_ID;
+	cmd[3] = 0x0; /* Reserved */
+	cmd[4] = HID_OUTPUT_GET_SYSINFO;
+
+	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
+			   HID_OUTPUT_GET_SYSINFO_SIZE);
+	if (rc) {
+		dev_err(ts->dev, "Failed to write command %d", rc);
+		goto error;
+	}
+
+	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+				msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT));
+	if (!rc) {
+		dev_err(ts->dev, "HID output cmd execution timed out\n");
+		rc = -ETIME;
+		goto error;
+	}
+
+	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO);
+	if (rc) {
+		dev_err(ts->dev, "Validation of the response failed\n");
+		goto error;
+	}
+
+	return cyttsp5_get_sysinfo_regs(ts);
+
+error:
+	mutex_lock(&ts->system_lock);
+	ts->hid_cmd_state = HID_CMD_DONE;
+	mutex_unlock(&ts->system_lock);
+	return rc;
+}
+
+static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts)
+{
+	int rc;
+	u8 cmd[HID_OUTPUT_BL_LAUNCH_APP];
+	u16 crc;
+
+	mutex_lock(&ts->system_lock);
+	ts->hid_cmd_state = HID_CMD_BUSY;
+	mutex_unlock(&ts->system_lock);
+
+	cmd[0] = LOW_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+	cmd[1] = HI_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+	cmd[2] = HID_BL_OUTPUT_REPORT_ID;
+	cmd[3] = 0x0; /* Reserved */
+	cmd[4] = HID_OUTPUT_BL_SOP;
+	cmd[5] = HID_OUTPUT_BL_LAUNCH_APP;
+	cmd[6] = 0x0; /* Low bytes of data */
+	cmd[7] = 0x0; /* Hi bytes of data */
+	crc = cyttsp5_compute_crc(&cmd[4], 4);
+	cmd[8] = LOW_BYTE(crc);
+	cmd[9] = HI_BYTE(crc);
+	cmd[10] = HID_OUTPUT_BL_EOP;
+
+	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
+			   HID_OUTPUT_BL_LAUNCH_APP_SIZE);
+	if (rc) {
+		dev_err(ts->dev, "Failed to write command %d", rc);
+		goto error;
+	}
+
+	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+				msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT));
+	if (!rc) {
+		dev_err(ts->dev, "HID output cmd execution timed out\n");
+		rc = -ETIME;
+		goto error;
+	}
+
+	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP);
+	if (rc) {
+		dev_err(ts->dev, "Validation of the response failed\n");
+		goto error;
+	}
+
+	return rc;
+
+error:
+	mutex_lock(&ts->system_lock);
+	ts->hid_cmd_state = HID_CMD_DONE;
+	mutex_unlock(&ts->system_lock);
+
+	return rc;
+}
+
+static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
+				      struct cyttsp5_hid_desc *desc)
+{
+	struct device *dev = ts->dev;
+	__le16 hid_desc_register = HID_DESC_REG;
+	int rc;
+	u8 cmd[2];
+
+	/* Read HID descriptor length and version */
+	mutex_lock(&ts->system_lock);
+	ts->hid_cmd_state = HID_CMD_BUSY;
+	mutex_unlock(&ts->system_lock);
+
+	/* Set HID descriptor register */
+	memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
+
+	rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
+	if (rc < 0) {
+		dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
+		goto error;
+	}
+
+	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
+				msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
+	if (!rc) {
+		dev_err(ts->dev, "HID get descriptor timed out\n");
+		rc = -ETIME;
+		goto error;
+	}
+
+	memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
+
+	/* Check HID descriptor length and version */
+	if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
+	    le16_to_cpu(desc->bcd_version) != HID_VERSION) {
+		dev_err(dev, "Unsupported HID version\n");
+		return -ENODEV;
+	}
+
+	goto exit;
+
+error:
+	mutex_lock(&ts->system_lock);
+	ts->hid_cmd_state = HID_CMD_DONE;
+	mutex_unlock(&ts->system_lock);
+exit:
+	return rc;
+}
+
+static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size,
+			int offset)
+{
+	tch_abs->ofs = offset / 8;
+	tch_abs->size = report_size / 8;
+	if (report_size % 8)
+		tch_abs->size += 1;
+	tch_abs->min = 0;
+	tch_abs->max = 1 << report_size;
+	tch_abs->bofs = offset - (tch_abs->ofs << 3);
+
+	return 0;
+}
+
+static int move_button_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
+{
+	memcpy(si->xy_mode, ts->input_buf, BTN_INPUT_HEADER_SIZE);
+	memcpy(si->xy_data, &ts->input_buf[BTN_INPUT_HEADER_SIZE],
+	       BTN_REPORT_SIZE);
+
+	return 0;
+}
+
+static int move_touch_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
+{
+	int max_tch = si->sensing_conf_data.max_tch;
+	int num_cur_tch;
+	int length;
+	struct cyttsp5_tch_abs_params *tch = &si->tch_hdr;
+
+	memcpy(si->xy_mode, ts->input_buf, TOUCH_INPUT_HEADER_SIZE);
+
+	cyttsp5_get_touch_axis(&num_cur_tch, tch->size,
+			       tch->max, si->xy_mode + 3 + tch->ofs, tch->bofs);
+	if (unlikely(num_cur_tch > max_tch))
+		num_cur_tch = max_tch;
+
+	length = num_cur_tch * TOUCH_REPORT_SIZE;
+
+	memcpy(si->xy_data, &ts->input_buf[TOUCH_INPUT_HEADER_SIZE], length);
+
+	return 0;
+}
+
+static irqreturn_t cyttsp5_handle_irq(int irq, void *handle)
+{
+	struct cyttsp5 *ts = handle;
+	int report_id;
+	int size;
+	int rc;
+
+	rc = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT);
+	if (rc)
+		return IRQ_HANDLED;
+
+	size = get_unaligned_le16(&ts->input_buf[0]);
+
+	/* check reset */
+	if (size == 0) {
+		memcpy(ts->response_buf, ts->input_buf, 2);
+
+		mutex_lock(&ts->system_lock);
+		ts->hid_cmd_state = HID_CMD_DONE;
+		mutex_unlock(&ts->system_lock);
+		wake_up(&ts->wait_q);
+		return IRQ_HANDLED;
+	}
+
+	report_id = ts->input_buf[2];
+
+	if (report_id == HID_TOUCH_REPORT_ID) {
+		move_touch_data(ts, &ts->sysinfo);
+		cyttsp5_mt_attention(ts->dev);
+	} else if (report_id == HID_BTN_REPORT_ID) {
+		move_button_data(ts, &ts->sysinfo);
+		cyttsp5_btn_attention(ts->dev);
+	} else {
+		/* It is not an input but a command response */
+		memcpy(ts->response_buf, ts->input_buf, size);
+
+		mutex_lock(&ts->system_lock);
+		ts->hid_cmd_state = HID_CMD_DONE;
+		mutex_unlock(&ts->system_lock);
+		wake_up(&ts->wait_q);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int cyttsp5_deassert_int(struct cyttsp5 *ts)
+{
+	u16 size;
+	u8 buf[2];
+	int rc;
+
+	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, 2);
+	if (rc < 0)
+		return rc;
+
+	size = get_unaligned_le16(&buf[0]);
+	if (size == 2 || size == 0)
+		return 0;
+
+	return -EINVAL;
+}
+
+static int cyttsp5_fill_all_touch(struct cyttsp5 *ts)
+{
+	struct cyttsp5_sysinfo *si = &ts->sysinfo;
+
+	fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16,
+		     TOUCH_REPORT_DESC_X);
+	fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16,
+		     TOUCH_REPORT_DESC_Y);
+	fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8,
+		     TOUCH_REPORT_DESC_P);
+	fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5,
+		     TOUCH_REPORT_DESC_CONTACTID);
+	fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5,
+		     TOUCH_REPORT_DESC_HDR_CONTACTCOUNT);
+	fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8,
+		     TOUCH_REPORT_DESC_MAJ);
+	fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8,
+		     TOUCH_REPORT_DESC_MIN);
+
+	return 0;
+}
+
+static int cyttsp5_startup(struct cyttsp5 *ts)
+{
+	int rc;
+
+	rc = cyttsp5_deassert_int(ts);
+	if (rc) {
+		dev_err(ts->dev, "Error on deassert int r=%d\n", rc);
+		return -ENODEV;
+	}
+
+	/*
+	 * Launch the application as the device starts in bootloader mode
+	 * because of a power-on-reset
+	 */
+	rc = cyttsp5_hid_output_bl_launch_app(ts);
+	if (rc < 0) {
+		dev_err(ts->dev, "Error on launch app r=%d\n", rc);
+		return rc;
+	}
+
+	rc = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc);
+	if (rc < 0) {
+		dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", rc);
+		return rc;
+	}
+
+	rc = cyttsp5_fill_all_touch(ts);
+	if (rc < 0) {
+		dev_err(ts->dev, "Error on report descriptor r=%d\n", rc);
+		return rc;
+	}
+
+	rc = cyttsp5_hid_output_get_sysinfo(ts);
+	if (rc) {
+		dev_err(ts->dev, "Error on getting sysinfo r=%d\n", rc);
+		return rc;
+	}
+
+	return rc;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cyttsp5_of_match[] = {
+	{ .compatible = "cypress,cyttsp5", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cyttsp5_of_match);
+#endif
+
+static const struct i2c_device_id cyttsp5_i2c_id[] = {
+	{ CYTTSP5_NAME, 0, },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id);
+
+static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
+			 const char *name)
+{
+	struct cyttsp5 *ts;
+	struct cyttsp5_sysinfo *si;
+	int rc = 0, i;
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	/* Initialize device info */
+	ts->regmap = regmap;
+	ts->dev = dev;
+	si = &ts->sysinfo;
+	dev_set_drvdata(dev, ts);
+
+	/* Initialize mutexes and spinlocks */
+	mutex_init(&ts->system_lock);
+
+	/* Initialize wait queue */
+	init_waitqueue_head(&ts->wait_q);
+
+	/* Reset the gpio to be in a reset state */
+	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ts->reset_gpio)) {
+		rc = PTR_ERR(ts->reset_gpio);
+		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
+		return rc;
+	}
+	gpiod_set_value(ts->reset_gpio, 1);
+
+	/* Need a delay to have device up */
+	msleep(20);
+
+	rc = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq,
+				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				       name, ts);
+	if (rc) {
+		dev_err(dev, "unable to request IRQ\n");
+		return rc;
+	}
+
+	rc = cyttsp5_startup(ts);
+	if (rc) {
+		dev_err(ts->dev, "Fail initial startup r=%d\n", rc);
+		return rc;
+	}
+
+	rc = cyttsp5_parse_dt_key_code(dev);
+	if (rc < 0) {
+		dev_err(ts->dev, "Error while parsing dts %d\n", rc);
+		return rc;
+	}
+
+	ts->input = devm_input_allocate_device(dev);
+	if (!ts->input) {
+		dev_err(dev, "Error, failed to allocate input device\n");
+		return -ENODEV;
+	}
+
+	ts->input->name = "cyttsp5";
+	scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
+	ts->input->phys = ts->phys;
+	ts->input->dev.parent = ts->dev;
+	input_set_drvdata(ts->input, ts);
+
+	touchscreen_parse_properties(ts->input, true, NULL);
+
+	__set_bit(EV_KEY, ts->input->evbit);
+	for (i = 0; i < si->num_btns; i++)
+		__set_bit(si->key_code[i], ts->input->keybit);
+
+	return cyttsp5_setup_input_device(dev);
+}
+
+static int cyttsp5_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	static const struct regmap_config config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+
+	regmap = devm_regmap_init_i2c(client, &config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "regmap allocation failed: %ld\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return cyttsp5_probe(&client->dev, regmap, client->irq, client->name);
+}
+
+static int cyttsp5_remove(struct device *dev)
+{
+	struct cyttsp5 *ts = dev_get_drvdata(dev);
+
+	input_unregister_device(ts->input);
+
+	return 0;
+}
+
+static int cyttsp5_i2c_remove(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+
+	return cyttsp5_remove(dev);
+}
+
+static struct i2c_driver cyttsp5_i2c_driver = {
+	.driver = {
+		.name = CYTTSP5_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(cyttsp5_of_match),
+	},
+	.probe = cyttsp5_i2c_probe,
+	.remove = cyttsp5_i2c_remove,
+	.id_table = cyttsp5_i2c_id,
+};
+
+module_i2c_driver(cyttsp5_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
+MODULE_AUTHOR("Mylène Josserand <mylene.josserand@free-electrons.com>");
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v4 2/2] dt-bindings: input: Add documentation for cyttsp5
  2017-12-01 15:39 [PATCH v4 0/2] Input: Add Cypress Gen5 Touchscreen driver Mylène Josserand
  2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
@ 2017-12-01 15:39 ` Mylène Josserand
  1 sibling, 0 replies; 14+ messages in thread
From: Mylène Josserand @ 2017-12-01 15:39 UTC (permalink / raw)
  To: dmitry.torokhov, robh+dt, mark.rutland
  Cc: linux-kernel, linux-input, devicetree, mylene.josserand,
	thomas.petazzoni, maxime.ripard

Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
documentation. It can use I2C or SPI bus.
This touchscreen can handle some defined zone that are designed and
sent as button. To be able to customize the keycode sent, the
"linux,keycodes" property can be used.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 .../bindings/input/touchscreen/cypress,cyttsp5.txt | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.txt b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.txt
new file mode 100644
index 000000000000..1e0e90e322c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.txt
@@ -0,0 +1,39 @@
+* Cypress cyttsp touchscreen controller, generation 5
+
+Required properties:
+ - compatible		: must be "cypress,cyttsp5"
+ - reg			: Device I2C address or SPI chip select number
+ - interrupt-parent	: the phandle for the gpio controller
+			  (see interrupt binding[0]).
+ - interrupts		: (gpio) interrupt to which the chip is connected
+			  (see interrupt binding[0]).
+
+Optional properties:
+ - reset-gpios		: the reset gpio the chip is connected to
+			  (see GPIO binding[1] for more details).
+Some other touchscreen optional properties can be defined such as
+"touchscreen-size-x". See ./touchscreen.txt[2] for more details.
+
+This touchscreen can handle some buttons that are touchscreen's defined zones.
+Each button's event can be customized using a property:
+	- linux,keycodes: List of keycode to emit.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+
+Example:
+&i2c0 {
+	[...]
+
+	touchscreen@24 {
+		compatible = "cypress,cyttsp5";
+		reg = <0x24>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		touchscreen-swapped-x-y;
+		linux,keycodes = <KEY_HOMEPAGE>, <KEY_MENU>, <KEY_BACK>;
+	};
+};
-- 
2.11.0


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
  2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
  2017-12-03 14:29   ` [PATCH] Input: fix platform_no_drv_owner.cocci warnings kbuild test robot
@ 2017-12-03 14:29   ` kbuild test robot
  2017-12-13 11:37   ` kbuild test robot
                     ` (3 subsequent siblings)
  5 siblings, 0 replies; 14+ messages in thread
From: kbuild test robot @ 2017-12-03 14:29 UTC (permalink / raw)
  Cc: kbuild-all, dmitry.torokhov, robh+dt, mark.rutland, linux-kernel,
	linux-input, devicetree, mylene.josserand, thomas.petazzoni,
	maxime.ripard

Hi Mylène,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on input/next]
[also build test WARNING on v4.15-rc1 next-20171201]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Myl-ne-Josserand/Input-Add-driver-for-Cypress-Generation-5-touchscreen/20171203-203557
base:   https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next


coccinelle warnings: (new ones prefixed by >>)

>> drivers/input/touchscreen/cyttsp5.c:1098:3-8: No need to set .owner here. The core will do it.

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH] Input: fix platform_no_drv_owner.cocci warnings
  2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
@ 2017-12-03 14:29   ` kbuild test robot
  2017-12-03 14:29   ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen kbuild test robot
                     ` (4 subsequent siblings)
  5 siblings, 0 replies; 14+ messages in thread
From: kbuild test robot @ 2017-12-03 14:29 UTC (permalink / raw)
  Cc: kbuild-all, dmitry.torokhov, robh+dt, mark.rutland, linux-kernel,
	linux-input, devicetree, mylene.josserand, thomas.petazzoni,
	maxime.ripard

drivers/input/touchscreen/cyttsp5.c:1098:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Fixes: 68d0bd1e4815 ("Input: Add driver for Cypress Generation 5 touchscreen")
CC: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 cyttsp5.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/input/touchscreen/cyttsp5.c
+++ b/drivers/input/touchscreen/cyttsp5.c
@@ -1095,7 +1095,6 @@ static int cyttsp5_i2c_remove(struct i2c
 static struct i2c_driver cyttsp5_i2c_driver = {
 	.driver = {
 		.name = CYTTSP5_NAME,
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(cyttsp5_of_match),
 	},
 	.probe = cyttsp5_i2c_probe,

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
  2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
  2017-12-03 14:29   ` [PATCH] Input: fix platform_no_drv_owner.cocci warnings kbuild test robot
  2017-12-03 14:29   ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen kbuild test robot
@ 2017-12-13 11:37   ` kbuild test robot
  2017-12-13 11:37   ` [RFC PATCH] Input: hid_cmd_state can be static kbuild test robot
                     ` (2 subsequent siblings)
  5 siblings, 0 replies; 14+ messages in thread
From: kbuild test robot @ 2017-12-13 11:37 UTC (permalink / raw)
  Cc: kbuild-all, dmitry.torokhov, robh+dt, mark.rutland, linux-kernel,
	linux-input, devicetree, mylene.josserand, thomas.petazzoni,
	maxime.ripard

Hi Mylène,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on input/next]
[also build test WARNING on v4.15-rc3 next-20171213]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Myl-ne-Josserand/Input-Add-driver-for-Cypress-Generation-5-touchscreen/20171203-203557
base:   https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next
reproduce:
        # apt-get install sparse
        make ARCH=x86_64 allmodconfig
        make C=1 CF=-D__CHECK_ENDIAN__


sparse warnings: (new ones prefixed by >>)


Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [RFC PATCH] Input: hid_cmd_state can be static
  2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
                     ` (2 preceding siblings ...)
  2017-12-13 11:37   ` kbuild test robot
@ 2017-12-13 11:37   ` kbuild test robot
  2018-01-22 12:50   ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Maxime Ripard
       [not found]   ` <20171201153957.13053-2-mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
  5 siblings, 0 replies; 14+ messages in thread
From: kbuild test robot @ 2017-12-13 11:37 UTC (permalink / raw)
  Cc: kbuild-all, dmitry.torokhov, robh+dt, mark.rutland, linux-kernel,
	linux-input, devicetree, mylene.josserand, thomas.petazzoni,
	maxime.ripard


Fixes: 68d0bd1e4815 ("Input: Add driver for Cypress Generation 5 touchscreen")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---
 cyttsp5.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
index a41feea..9694ae41 100644
--- a/drivers/input/touchscreen/cyttsp5.c
+++ b/drivers/input/touchscreen/cyttsp5.c
@@ -139,7 +139,7 @@ struct cyttsp5_sensing_conf_data {
 	u8 max_tch;
 };
 
-enum { HID_CMD_DONE, HID_CMD_BUSY } hid_cmd_state;
+static enum { HID_CMD_DONE, HID_CMD_BUSY } hid_cmd_state;
 
 enum cyttsp5_tch_abs {	/* for ordering within the extracted touch data array */
 	CY_TCH_X,	/* X */

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
  2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
                     ` (3 preceding siblings ...)
  2017-12-13 11:37   ` [RFC PATCH] Input: hid_cmd_state can be static kbuild test robot
@ 2018-01-22 12:50   ` Maxime Ripard
       [not found]   ` <20171201153957.13053-2-mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
  5 siblings, 0 replies; 14+ messages in thread
From: Maxime Ripard @ 2018-01-22 12:50 UTC (permalink / raw)
  To: dmitry.torokhov, Mylène Josserand
  Cc: robh+dt, mark.rutland, linux-kernel, linux-input, devicetree,
	thomas.petazzoni

[-- Attachment #1: Type: text/plain, Size: 885 bytes --]

Dmitry,

On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
> This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
> controllers. This driver supports only the I2C bus but it uses regmap
> so SPI support could be added later.
> The touchscreen can retrieve some defined zone that are handled as
> buttons (according to the hardware). That is why it handles
> button and multitouch events.
> 
> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>

Can we have some review here? This is the fourth iteration, with the
first having been sent back in May, and as far as I know we never got
any review from you. Can we please move forward on this?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
       [not found]   ` <20171201153957.13053-2-mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
@ 2018-01-22 20:11     ` Marcus Folkesson
  2018-01-23  9:33       ` Mylene Josserand
  2018-01-23  4:15     ` Dmitry Torokhov
  1 sibling, 1 reply; 14+ messages in thread
From: Marcus Folkesson @ 2018-01-22 20:11 UTC (permalink / raw)
  To: Mylène Josserand
  Cc: dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-input-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8

[-- Attachment #1: Type: text/plain, Size: 6537 bytes --]

Mylene,

On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
> +++ b/drivers/input/touchscreen/cyttsp5.c
> @@ -0,0 +1,1110 @@
> +/*
> + * Parade TrueTouch(TM) Standard Product V5 Module.
> + * For use with Parade touchscreen controllers.
> + *
> + * Copyright (C) 2015 Parade Technologies
> + * Copyright (C) 2012-2015 Cypress Semiconductor
> + * Copyright (C) 2017 Free Electrons
> + *
> + * Author: Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2, and only version 2, as published by the
> + * Free Software Foundation.

Please use SPDX license Identifier to describe the license.

E.g.
SPDX-License-Identifier: GPL-2.0

Also, the MODULE_LICENSE means GPL 2.0 or later per module.h and this does
not match the license description.

Could you make sure they are in sync?


> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <asm/unaligned.h>
> +#include <linux/crc-itu-t.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/gpio.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>

#include <linux/bitops.h>

since you are using BIT()


[snip]


> +static int cyttsp5_setup_input_device(struct device *dev)
> +{
> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int max_x, max_y, max_p;
> +	int max_x_tmp, max_y_tmp;
> +	int rc;
> +
> +	__set_bit(EV_ABS, ts->input->evbit);
> +	__set_bit(EV_REL, ts->input->evbit);
> +	__set_bit(EV_KEY, ts->input->evbit);
> +
> +	max_x_tmp = si->sensing_conf_data.res_x;
> +	max_y_tmp = si->sensing_conf_data.res_y;
> +	max_x = max_y_tmp - 1;
> +	max_y = max_x_tmp - 1;
> +	max_p = si->sensing_conf_data.max_z;
> +
> +	input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);
> +
> +	__set_bit(ABS_MT_POSITION_X, ts->input->absbit);
> +	__set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
> +	__set_bit(ABS_MT_PRESSURE, ts->input->absbit);

Not needed, input_set_abs_params() will set the bits for you below.


> +
> +	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
> +	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
> +	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
> +
> +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
> +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
> +
> +	rc = input_register_device(ts->input);
> +	if (rc < 0)
> +		dev_err(dev, "Error, failed register input device r=%d\n", rc);
> +
> +	return rc;
> +}
> +
> +

[snip]

> +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
> +				      struct cyttsp5_hid_desc *desc)
> +{
> +	struct device *dev = ts->dev;
> +	__le16 hid_desc_register = HID_DESC_REG;
> +	int rc;
> +	u8 cmd[2];
> +
> +	/* Read HID descriptor length and version */
> +	mutex_lock(&ts->system_lock);
> +	ts->hid_cmd_state = HID_CMD_BUSY;
> +	mutex_unlock(&ts->system_lock);
> +
> +	/* Set HID descriptor register */
> +	memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
> +
> +	rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
> +	if (rc < 0) {
> +		dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
> +		goto error;
> +	}
> +
> +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> +				msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
> +	if (!rc) {
> +		dev_err(ts->dev, "HID get descriptor timed out\n");
> +		rc = -ETIME;
> +		goto error;
> +	}
> +
> +	memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
> +
> +	/* Check HID descriptor length and version */
> +	if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
> +	    le16_to_cpu(desc->bcd_version) != HID_VERSION) {
> +		dev_err(dev, "Unsupported HID version\n");
> +		return -ENODEV;

Maybe it is supposed to return here, but all other faults use "goto
error".

> +	}
> +
> +	goto exit;
> +
> +error:
> +	mutex_lock(&ts->system_lock);
> +	ts->hid_cmd_state = HID_CMD_DONE;
> +	mutex_unlock(&ts->system_lock);
> +exit:
> +	return rc;
> +}
> +

[snip]

> +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
> +			 const char *name)
> +{
> +	struct cyttsp5 *ts;
> +	struct cyttsp5_sysinfo *si;
> +	int rc = 0, i;
> +
> +	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> +	if (!ts)
> +		return -ENOMEM;
> +
> +	/* Initialize device info */
> +	ts->regmap = regmap;
> +	ts->dev = dev;
> +	si = &ts->sysinfo;
> +	dev_set_drvdata(dev, ts);
> +
> +	/* Initialize mutexes and spinlocks */

No spinlocks here :-)

> +	mutex_init(&ts->system_lock);
> +
> +	/* Initialize wait queue */
> +	init_waitqueue_head(&ts->wait_q);
> +
> +	/* Reset the gpio to be in a reset state */
> +	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(ts->reset_gpio)) {
> +		rc = PTR_ERR(ts->reset_gpio);
> +		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
> +		return rc;
> +	}
> +	gpiod_set_value(ts->reset_gpio, 1);
> +

[snip]

> +static struct i2c_driver cyttsp5_i2c_driver = {
> +	.driver = {
> +		.name = CYTTSP5_NAME,
> +		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(cyttsp5_of_match),
> +	},
> +	.probe = cyttsp5_i2c_probe,
> +	.remove = cyttsp5_i2c_remove,
> +	.id_table = cyttsp5_i2c_id,
> +};
> +
> +module_i2c_driver(cyttsp5_i2c_driver);
> +
> +MODULE_LICENSE("GPL");

From linux/module.h:

/*
 * The following license idents are currently accepted as indicating free
 * software modules
 *
 *	"GPL"				[GNU Public License v2 or later]
 *	"GPL v2"			[GNU Public License v2]



> +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
> +MODULE_AUTHOR("Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>");
> -- 
> 2.11.0
> 

Best regards
Marcus Folkesson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
       [not found]   ` <20171201153957.13053-2-mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
  2018-01-22 20:11     ` Marcus Folkesson
@ 2018-01-23  4:15     ` Dmitry Torokhov
  2018-01-23 10:44       ` Mylene Josserand
  1 sibling, 1 reply; 14+ messages in thread
From: Dmitry Torokhov @ 2018-01-23  4:15 UTC (permalink / raw)
  To: Mylène Josserand
  Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-input-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8

Hi Mylène,

On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
> This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
> controllers. This driver supports only the I2C bus but it uses regmap
> so SPI support could be added later.
> The touchscreen can retrieve some defined zone that are handled as
> buttons (according to the hardware). That is why it handles
> button and multitouch events.
> 
> Reviewed-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
>  drivers/input/touchscreen/Kconfig   |   16 +
>  drivers/input/touchscreen/Makefile  |    1 +
>  drivers/input/touchscreen/cyttsp5.c | 1110 +++++++++++++++++++++++++++++++++++
>  3 files changed, 1127 insertions(+)
>  create mode 100644 drivers/input/touchscreen/cyttsp5.c
> 
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 0cfdb7cb610e..28eea6d5f1bb 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -238,6 +238,22 @@ config TOUCHSCREEN_CYTTSP4_SPI
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called cyttsp4_spi.
>  
> +config TOUCHSCREEN_CYTTSP5
> +	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
> +	depends on OF

Does it have to be? Please use generic device properties
(device_property_* API) and it can be used with ACPI and static board
files, of needed.

> +	select REGMAP_I2C
> +	select CRC_ITU_T
> +	help
> +	  Driver for Parade TrueTouch Standard Product
> +	  Generation 5 touchscreen controllers.
> +	  I2C bus interface support only.
> +
> +	  Say Y here if you have a Cypress Gen5 touchscreen.
> +	  If unsure, say N.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called cyttsp5.
> +
>  config TOUCHSCREEN_DA9034
>  	tristate "Touchscreen support for Dialog Semiconductor DA9034"
>  	depends on PMIC_DA903X
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index d2a2b3b7af27..e7d124901dd9 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
>  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
>  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
>  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
> +obj-$(CONFIG_TOUCHSCREEN_CYTTSP5)	+= cyttsp5.o
>  obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
>  obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
>  obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
> diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
> new file mode 100644
> index 000000000000..a41feea2cd5a
> --- /dev/null
> +++ b/drivers/input/touchscreen/cyttsp5.c
> @@ -0,0 +1,1110 @@
> +/*
> + * Parade TrueTouch(TM) Standard Product V5 Module.
> + * For use with Parade touchscreen controllers.
> + *
> + * Copyright (C) 2015 Parade Technologies
> + * Copyright (C) 2012-2015 Cypress Semiconductor
> + * Copyright (C) 2017 Free Electrons
> + *
> + * Author: Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2, and only version 2, as published by the
> + * Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <asm/unaligned.h>
> +#include <linux/crc-itu-t.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/gpio.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +#define CYTTSP5_NAME				"cyttsp5"
> +#define CY_I2C_DATA_SIZE			(2 * 256)
> +#define HID_VERSION				0x0100
> +#define CY_MAX_INPUT				512
> +#define CYTTSP5_PREALLOCATED_CMD_BUFFER	32
> +#define CY_BITS_PER_BTN			1
> +#define CY_NUM_BTN_EVENT_ID			((1 << CY_BITS_PER_BTN) - 1)
> +
> +#define MAX_AREA				255
> +#define HID_OUTPUT_BL_SOP			0x1
> +#define HID_OUTPUT_BL_EOP			0x17
> +#define HID_OUTPUT_BL_LAUNCH_APP		0x3B
> +#define HID_OUTPUT_BL_LAUNCH_APP_SIZE		11
> +#define HID_OUTPUT_GET_SYSINFO			0x2
> +#define HID_OUTPUT_GET_SYSINFO_SIZE		5
> +
> +#define HID_DESC_REG				0x1
> +#define HID_INPUT_REG				0x3
> +#define HID_OUTPUT_REG				0x4
> +
> +#define REPORT_ID_TOUCH			0x1
> +#define REPORT_ID_BTN				0x3
> +#define REPORT_SIZE_5				5
> +#define REPORT_SIZE_8				8
> +#define REPORT_SIZE_16				16
> +
> +/* Touch reports offsets */
> +/* Header offsets */
> +#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT	16
> +/* Record offsets */
> +#define TOUCH_REPORT_DESC_CONTACTID		8
> +#define TOUCH_REPORT_DESC_X			16
> +#define TOUCH_REPORT_DESC_Y			32
> +#define TOUCH_REPORT_DESC_P			48
> +#define TOUCH_REPORT_DESC_MAJ			56
> +#define TOUCH_REPORT_DESC_MIN			64
> +
> +/* HID */
> +#define HID_TOUCH_REPORT_ID			0x1
> +#define HID_BTN_REPORT_ID			0x3
> +#define HID_APP_RESPONSE_REPORT_ID		0x1F
> +#define HID_APP_OUTPUT_REPORT_ID		0x2F
> +#define HID_BL_RESPONSE_REPORT_ID		0x30
> +#define HID_BL_OUTPUT_REPORT_ID		0x40
> +
> +#define HID_OUTPUT_RESPONSE_REPORT_OFFSET	2
> +#define HID_OUTPUT_RESPONSE_CMD_OFFSET		4
> +#define HID_OUTPUT_RESPONSE_CMD_MASK		0x7F
> +
> +#define HID_SYSINFO_SENSING_OFFSET		33
> +#define HID_SYSINFO_BTN_OFFSET			48
> +#define HID_SYSINFO_BTN_MASK			0xFF
> +#define HID_SYSINFO_MAX_BTN			8
> +
> +/*  Timeout in ms */
> +#define CY_HID_OUTPUT_TIMEOUT			200
> +#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT	3000
> +#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT	4000
> +
> +/* maximum number of concurrent tracks */
> +#define TOUCH_REPORT_SIZE			10
> +#define TOUCH_INPUT_HEADER_SIZE		7
> +#define BTN_REPORT_SIZE			9
> +#define BTN_INPUT_HEADER_SIZE			5
> +
> +/* All usage pages for Touch Report */
> +#define TOUCH_REPORT_USAGE_PG_X		0x00010030
> +#define TOUCH_REPORT_USAGE_PG_Y		0x00010031
> +#define TOUCH_REPORT_USAGE_PG_P		0x000D0030
> +#define TOUCH_REPORT_USAGE_PG_CONTACTID	0x000D0051
> +#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT	0x000D0054
> +#define TOUCH_REPORT_USAGE_PG_MAJ		0xFF010062
> +#define TOUCH_REPORT_USAGE_PG_MIN		0xFF010063
> +#define TOUCH_COL_USAGE_PG			0x000D0022
> +
> +/* helpers */
> +#define HI_BYTE(x)				(u8)(((x) >> 8) & 0xFF)
> +#define LOW_BYTE(x)				(u8)((x) & 0xFF)
> +
> +/* System Information interface definitions */
> +struct cyttsp5_sensing_conf_data_dev {
> +	u8 electrodes_x;
> +	u8 electrodes_y;
> +	__le16 len_x;
> +	__le16 len_y;
> +	__le16 res_x;
> +	__le16 res_y;
> +	__le16 max_z;
> +	u8 origin_x;
> +	u8 origin_y;
> +	u8 btn;
> +	u8 scan_mode;
> +	u8 max_num_of_tch_per_refresh_cycle;
> +} __packed;
> +
> +struct cyttsp5_sensing_conf_data {
> +	u16 res_x;
> +	u16 res_y;
> +	u16 max_z;
> +	u16 len_x;
> +	u16 len_y;
> +	u8 origin_x;
> +	u8 origin_y;
> +	u8 max_tch;
> +};
> +
> +enum { HID_CMD_DONE, HID_CMD_BUSY } hid_cmd_state;
> +
> +enum cyttsp5_tch_abs {	/* for ordering within the extracted touch data array */
> +	CY_TCH_X,	/* X */
> +	CY_TCH_Y,	/* Y */
> +	CY_TCH_P,	/* P (Z) */
> +	CY_TCH_T,	/* TOUCH ID */
> +	CY_TCH_MAJ,	/* TOUCH_MAJOR */
> +	CY_TCH_MIN,	/* TOUCH_MINOR */
> +	CY_TCH_NUM_ABS,
> +};
> +
> +struct cyttsp5_tch_abs_params {
> +	size_t ofs;	/* abs byte offset */
> +	size_t size;	/* size in bits */
> +	size_t min;	/* min value */
> +	size_t max;	/* max value */
> +	size_t bofs;	/* bit offset */
> +};
> +
> +struct cyttsp5_touch {
> +	int hdr;
> +	int abs[CY_TCH_NUM_ABS];
> +};
> +
> +struct cyttsp5_sysinfo {
> +	struct cyttsp5_sensing_conf_data sensing_conf_data;
> +	int num_btns;
> +	struct cyttsp5_tch_abs_params tch_hdr;
> +	struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
> +	u32 key_code[HID_SYSINFO_MAX_BTN];
> +	u8 *xy_mode;
> +	u8 *xy_data;
> +};
> +
> +struct cyttsp5_hid_desc {
> +	__le16 hid_desc_len;
> +	u8 packet_id;
> +	u8 reserved_byte;
> +	__le16 bcd_version;
> +	__le16 report_desc_len;
> +	__le16 report_desc_register;
> +	__le16 input_register;
> +	__le16 max_input_len;
> +	__le16 output_register;
> +	__le16 max_output_len;
> +	__le16 command_register;
> +	__le16 data_register;
> +	__le16 vendor_id;
> +	__le16 product_id;
> +	__le16 version_id;
> +	u8 reserved[4];
> +} __packed;
> +
> +struct cyttsp5 {
> +	struct device *dev;
> +	struct mutex system_lock;
> +	wait_queue_head_t wait_q;
> +	struct cyttsp5_sysinfo sysinfo;
> +	int hid_cmd_state;
> +	struct cyttsp5_hid_desc hid_desc;
> +	u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER];
> +	u8 input_buf[CY_MAX_INPUT];
> +	u8 response_buf[CY_MAX_INPUT];
> +	struct gpio_desc *reset_gpio;
> +	struct input_dev *input;
> +	char phys[NAME_MAX];
> +	int num_prv_rec;
> +	struct regmap *regmap;
> +};
> +
> +/*
> + * For what understood in the datasheet, the register does not
> + * matter. For consistency, used the Input Register address
> + * but it does mean anything to the device. The important data
> + * to send is the I2C address
> + */
> +static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max)
> +{
> +	int rc;
> +	u32 size;
> +	u8 temp[2];
> +
> +	if (!buf)
> +		return -EINVAL;

Is it really possible? This is not a publicly facing API but private
driver data, do you ever happen to call it with NULL?

> +
> +	/* Read the frame to retrieve the size */
> +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, 2);
> +	if (rc < 0)
> +		return rc;

Can we call this kind of variables "error" pelase?

> +
> +	size = get_unaligned_le16(temp);
> +	if (!size || size == 2)
> +		return 0;
> +
> +	if (size > max)
> +		return -EINVAL;
> +
> +	/* Get the real value */
> +	return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size);
> +}
> +
> +static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
> +			 size_t size)
> +{
> +	u8 cmd[size + 1];
> +
> +	/* High bytes of register address needed as first byte of cmd */
> +	cmd[0] = HI_BYTE(reg);
> +
> +	/* Copy the rest of the data */
> +	if (data)
> +		memcpy(&cmd[1], data, size);
> +
> +	/* The hardware wants to receive a frame with the address register

The multiline comment block should start with "/*" on a separate line
please.

> +	 * contains in the first two bytes. As the regmap_write function
> +	 * add the register adresse in the frame, we use the LOW_BYTE as
> +	 * first frame byte for the address register and the first
> +	 * data byte is the high register + left of the cmd to send
> +	 */
> +	return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
> +}
> +
> +static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
> +			       unsigned long *ids)
> +{
> +	int t;
> +
> +	for (t = 0; t < max_slots; t++) {

	for_each_set_bit() {
	}

> +		if (test_bit(t, ids))
> +			continue;
> +		input_mt_slot(input, t);
> +		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
> +	}
> +
> +	input_sync(input);
> +}
> +
> +static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
> +{
> +	int t;
> +
> +	if (ts->num_prv_rec == 0)
> +		return;

Do you need this check? The caller checks the same condition.

> +
> +	for (t = 0; t < max_slots; t++) {
> +		input_mt_slot(ts->input, t);
> +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
> +	}
> +}
> +
> +static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
> +{
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int max = si->tch_abs[CY_TCH_T].max;
> +
> +	if (ts->num_prv_rec != 0) {
> +		cyttsp5_report_slot_liftoff(ts, max);
> +		input_sync(ts->input);
> +		ts->num_prv_rec = 0;
> +	}
> +}
> +
> +static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
> +				   int bofs)
> +{
> +	int nbyte;
> +	int next;
> +
> +	for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
> +		*axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
> +
> +	*axis &= max - 1;
> +}
> +
> +static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
> +				     struct cyttsp5_touch *touch, u8 *xy_data)
> +{
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	enum cyttsp5_tch_abs abs;
> +
> +	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
> +		cyttsp5_get_touch_axis(&touch->abs[abs],
> +				       si->tch_abs[abs].size,
> +				       si->tch_abs[abs].max,
> +				       xy_data + si->tch_abs[abs].ofs,
> +				       si->tch_abs[abs].bofs);
> +	}
> +}
> +
> +static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
> +				   struct cyttsp5_touch *tch, int num_cur_tch)
> +{
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int i, t = 0;
> +	DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
> +	u8 *tch_addr;
> +	int tmp;
> +
> +	bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
> +	memset(tch->abs, 0, sizeof(tch->abs));
> +
> +	for (i = 0; i < num_cur_tch; i++) {
> +		tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
> +		cyttsp5_get_touch_record(ts, tch, tch_addr);
> +
> +		/* Convert MAJOR/MINOR from mm to resolution */
> +		tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
> +		tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
> +		tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
> +		tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
> +
> +		t = tch->abs[CY_TCH_T];
> +		input_mt_slot(ts->input, t);
> +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
> +		__set_bit(t, ids);
> +
> +		/* position and pressure fields */
> +		input_report_abs(ts->input, ABS_MT_POSITION_X,
> +				 tch->abs[CY_TCH_X]);
> +		input_report_abs(ts->input, ABS_MT_POSITION_Y,
> +				 tch->abs[CY_TCH_Y]);
> +		input_report_abs(ts->input, ABS_MT_PRESSURE,
> +				 tch->abs[CY_TCH_P]);
> +
> +		/* Get the extended touch fields */
> +		input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
> +				 tch->abs[CY_TCH_MAJ]);
> +		input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
> +				 tch->abs[CY_TCH_MIN]);
> +	}
> +
> +	cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
> +
> +	ts->num_prv_rec = num_cur_tch;
> +}
> +
> +/* read xy_data for all current touches */
> +static int cyttsp5_xy_worker(struct cyttsp5 *ts)
> +{
> +	struct device *dev = ts->dev;
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int max_tch = si->sensing_conf_data.max_tch;
> +	struct cyttsp5_touch tch;
> +	u8 num_cur_tch;
> +
> +	cyttsp5_get_touch_axis(&tch.hdr, si->tch_hdr.size,
> +			       si->tch_hdr.max,
> +			       si->xy_mode + 3 + si->tch_hdr.ofs,
> +			       si->tch_hdr.bofs);
> +
> +	num_cur_tch = tch.hdr;
> +	if (num_cur_tch > max_tch) {
> +		dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch);
> +		num_cur_tch = max_tch;
> +	}
> +
> +	if (num_cur_tch == 0 && ts->num_prv_rec == 0)
> +		return 0;
> +
> +	/* extract xy_data for all currently reported touches */
> +	if (num_cur_tch)
> +		cyttsp5_get_mt_touches(ts, &tch, num_cur_tch);
> +	else
> +		cyttsp5_mt_lift_all(ts);
> +
> +	return 0;
> +}
> +
> +static int cyttsp5_mt_attention(struct device *dev)
> +{
> +	struct cyttsp5 *ts = dev_get_drvdata(dev);

Why don't you pass ts into cyttsp5_mt_attention?

> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int rc;
> +
> +	if (si->xy_mode[2] != HID_TOUCH_REPORT_ID)
> +		return 0;
> +
> +	/* core handles handshake */
> +	rc = cyttsp5_xy_worker(ts);
> +	if (rc < 0)
> +		dev_err(dev, "xy_worker error r=%d\n", rc);
> +
> +	return rc;
> +}
> +
> +static int cyttsp5_setup_input_device(struct device *dev)
> +{
> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int max_x, max_y, max_p;
> +	int max_x_tmp, max_y_tmp;
> +	int rc;
> +
> +	__set_bit(EV_ABS, ts->input->evbit);
> +	__set_bit(EV_REL, ts->input->evbit);
> +	__set_bit(EV_KEY, ts->input->evbit);
> +
> +	max_x_tmp = si->sensing_conf_data.res_x;
> +	max_y_tmp = si->sensing_conf_data.res_y;
> +	max_x = max_y_tmp - 1;
> +	max_y = max_x_tmp - 1;
> +	max_p = si->sensing_conf_data.max_z;
> +
> +	input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);

Error handling.

> +
> +	__set_bit(ABS_MT_POSITION_X, ts->input->absbit);
> +	__set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
> +	__set_bit(ABS_MT_PRESSURE, ts->input->absbit);
> +
> +	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
> +	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
> +	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
> +
> +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
> +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);

You might want to use the standard DT touchscreen properties and
reporting functions to support axis inversion and swapping of axes.

> +
> +	rc = input_register_device(ts->input);
> +	if (rc < 0)
> +		dev_err(dev, "Error, failed register input device r=%d\n", rc);
> +
> +	return rc;
> +}
> +
> +#ifdef CONFIG_OF
> +static int cyttsp5_parse_dt_key_code(struct device *dev)
> +{
> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	struct device_node *np;
> +	int i;
> +
> +	np = dev->of_node;
> +	if (!np)
> +		return -EINVAL;
> +
> +	if (!si->num_btns)
> +		return 0;
> +
> +	/* Initialize the button to RESERVED */
> +	for (i = 0; i < si->num_btns; i++)
> +		si->key_code[i] = KEY_RESERVED;
> +
> +	return of_property_read_u32_array(np, "linux,keycodes",
> +				   si->key_code, si->num_btns);
> +}
> +#else
> +static int cyttsp5_parse_dt_key_code(struct device *dev)
> +{
> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int i;
> +
> +	if (!si->num_btns)
> +		return 0;
> +
> +	/* Initialize the button to RESERVED */
> +	for (i = 0; i < si->num_btns; i++)
> +		si->key_code[i] = KEY_RESERVED;
> +
> +	return 0;
> +}
> +#endif
> +
> +static int cyttsp5_btn_attention(struct device *dev)
> +{
> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int cur_btn;
> +	int cur_btn_state;
> +
> +	if (si->xy_mode[2] != HID_BTN_REPORT_ID || !si->num_btns)
> +		return 0;
> +
> +	/* extract button press/release touch information */
> +	for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) {
> +		/* Get current button state */
> +		cur_btn_state = (si->xy_data[0] >> (cur_btn * CY_BITS_PER_BTN))
> +			& CY_NUM_BTN_EVENT_ID;
> +
> +		input_report_key(ts->input, si->key_code[cur_btn],
> +				 cur_btn_state);
> +		input_sync(ts->input);

You do not need to sen sync after each button, send it once after all
buttons sent.

> +	}
> +
> +	return 0;
> +}
> +
> +static u16 cyttsp5_compute_crc(u8 *buf, u32 size)
> +{
> +	u16 remainder = 0xFFFF;
> +	u16 xor_mask = 0x0000;
> +	u32 index;
> +	u32 byte_value;
> +	u32 table_index;
> +	u32 crc_bit_width = sizeof(u16) * 8;
> +
> +	/* Divide the message by polynomial, via the table. */
> +	for (index = 0; index < size; index++) {
> +		byte_value = buf[index];
> +		table_index = ((byte_value >> 4) & 0x0F)
> +			^ (remainder >> (crc_bit_width - 4));
> +		remainder = crc_itu_t_table[table_index]
> +			^ (remainder << 4);
> +		table_index = (byte_value & 0x0F)
> +			^ (remainder >> (crc_bit_width - 4));
> +		remainder = crc_itu_t_table[table_index]
> +			^ (remainder << 4);
> +	}
> +
> +	/* Perform the final remainder CRC. */
> +	return remainder ^ xor_mask;
> +}
> +
> +static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code)
> +{
> +	u16 size, crc;
> +	u8 status, offset;
> +	int command_code;
> +
> +	size = get_unaligned_le16(&ts->response_buf[0]);
> +
> +	if (!size)
> +		return 0;
> +
> +	offset = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET];
> +
> +	if (offset == HID_BL_RESPONSE_REPORT_ID) {
> +		if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) {
> +			dev_err(ts->dev, "HID output response, wrong SOP\n");
> +			return -EPROTO;
> +		}
> +
> +		if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) {
> +			dev_err(ts->dev, "HID output response, wrong EOP\n");
> +			return -EPROTO;
> +		}
> +
> +		crc = cyttsp5_compute_crc(&ts->response_buf[4], size - 7);
> +		if (ts->response_buf[size - 3] != LOW_BYTE(crc) ||
> +		    ts->response_buf[size - 2] != HI_BYTE(crc)) {
> +			dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n",
> +				crc);
> +			return -EPROTO;
> +		}
> +
> +		status = ts->response_buf[5];
> +		if (status) {
> +			dev_err(ts->dev, "HID output response, ERROR:%d\n",
> +				status);
> +			return -EPROTO;
> +		}
> +	}
> +
> +	if (offset == HID_APP_RESPONSE_REPORT_ID) {
> +		command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET]
> +			& HID_OUTPUT_RESPONSE_CMD_MASK;
> +		if (command_code != code) {
> +			dev_err(ts->dev,
> +				"HID output response, wrong command_code:%X\n",
> +				command_code);
> +			return -EPROTO;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts)
> +{
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +	int i;
> +	unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET]
> +		& HID_SYSINFO_BTN_MASK;
> +
> +	si->num_btns = 0;
> +	for (i = 0; i < HID_SYSINFO_MAX_BTN; i++) {
> +		if (btns & BIT(i))
> +			si->num_btns++;
> +	}

	si->num_btns = hweight8(ts->response_buf[HID_SYSINFO_BTN_OFFSET]);

> +}
> +
> +static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts)
> +{
> +	struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data;
> +	struct cyttsp5_sensing_conf_data_dev *scd_dev =
> +		(struct cyttsp5_sensing_conf_data_dev *)
> +		&ts->response_buf[HID_SYSINFO_SENSING_OFFSET];
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +
> +	cyttsp5_si_get_btn_data(ts);
> +
> +	scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle;
> +	scd->res_x = get_unaligned_le16(&scd_dev->res_x);
> +	scd->res_y = get_unaligned_le16(&scd_dev->res_y);
> +	scd->max_z = get_unaligned_le16(&scd_dev->max_z);
> +	scd->len_x = get_unaligned_le16(&scd_dev->len_x);
> +	scd->len_y = get_unaligned_le16(&scd_dev->len_y);
> +
> +	si->xy_data = devm_kzalloc(ts->dev, scd->max_tch * TOUCH_REPORT_SIZE,
> +				   GFP_KERNEL);
> +	if (!si->xy_data)
> +		return -ENOMEM;
> +
> +	si->xy_mode = devm_kzalloc(ts->dev, TOUCH_INPUT_HEADER_SIZE,
> +				   GFP_KERNEL);
> +	if (!si->xy_mode)
> +		return -ENOMEM;

Why do we need these 2 allocated separately form the driver data?

> +
> +	return 0;
> +}
> +
> +static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts)
> +{
> +	int rc;
> +	u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE];
> +
> +	ts->hid_cmd_state = HID_CMD_BUSY;
> +
> +	/* HI bytes of Output register address */
> +	cmd[0] = LOW_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
> +	cmd[1] = HI_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
> +	cmd[2] = HID_APP_OUTPUT_REPORT_ID;
> +	cmd[3] = 0x0; /* Reserved */
> +	cmd[4] = HID_OUTPUT_GET_SYSINFO;
> +
> +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
> +			   HID_OUTPUT_GET_SYSINFO_SIZE);
> +	if (rc) {
> +		dev_err(ts->dev, "Failed to write command %d", rc);
> +		goto error;
> +	}
> +
> +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> +				msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT));
> +	if (!rc) {
> +		dev_err(ts->dev, "HID output cmd execution timed out\n");
> +		rc = -ETIME;
> +		goto error;
> +	}
> +
> +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO);
> +	if (rc) {
> +		dev_err(ts->dev, "Validation of the response failed\n");
> +		goto error;
> +	}
> +
> +	return cyttsp5_get_sysinfo_regs(ts);
> +
> +error:
> +	mutex_lock(&ts->system_lock);
> +	ts->hid_cmd_state = HID_CMD_DONE;
> +	mutex_unlock(&ts->system_lock);
> +	return rc;
> +}
> +
> +static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts)
> +{
> +	int rc;
> +	u8 cmd[HID_OUTPUT_BL_LAUNCH_APP];
> +	u16 crc;
> +
> +	mutex_lock(&ts->system_lock);
> +	ts->hid_cmd_state = HID_CMD_BUSY;
> +	mutex_unlock(&ts->system_lock);
> +
> +	cmd[0] = LOW_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> +	cmd[1] = HI_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> +	cmd[2] = HID_BL_OUTPUT_REPORT_ID;
> +	cmd[3] = 0x0; /* Reserved */
> +	cmd[4] = HID_OUTPUT_BL_SOP;
> +	cmd[5] = HID_OUTPUT_BL_LAUNCH_APP;
> +	cmd[6] = 0x0; /* Low bytes of data */
> +	cmd[7] = 0x0; /* Hi bytes of data */
> +	crc = cyttsp5_compute_crc(&cmd[4], 4);
> +	cmd[8] = LOW_BYTE(crc);
> +	cmd[9] = HI_BYTE(crc);
> +	cmd[10] = HID_OUTPUT_BL_EOP;
> +
> +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
> +			   HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> +	if (rc) {
> +		dev_err(ts->dev, "Failed to write command %d", rc);
> +		goto error;
> +	}
> +
> +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> +				msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT));
> +	if (!rc) {
> +		dev_err(ts->dev, "HID output cmd execution timed out\n");
> +		rc = -ETIME;
> +		goto error;
> +	}
> +
> +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP);
> +	if (rc) {
> +		dev_err(ts->dev, "Validation of the response failed\n");
> +		goto error;
> +	}
> +
> +	return rc;
> +
> +error:
> +	mutex_lock(&ts->system_lock);
> +	ts->hid_cmd_state = HID_CMD_DONE;
> +	mutex_unlock(&ts->system_lock);
> +
> +	return rc;
> +}
> +
> +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
> +				      struct cyttsp5_hid_desc *desc)
> +{
> +	struct device *dev = ts->dev;
> +	__le16 hid_desc_register = HID_DESC_REG;
> +	int rc;
> +	u8 cmd[2];
> +
> +	/* Read HID descriptor length and version */
> +	mutex_lock(&ts->system_lock);
> +	ts->hid_cmd_state = HID_CMD_BUSY;
> +	mutex_unlock(&ts->system_lock);
> +
> +	/* Set HID descriptor register */
> +	memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
> +
> +	rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
> +	if (rc < 0) {
> +		dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
> +		goto error;
> +	}
> +
> +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> +				msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
> +	if (!rc) {
> +		dev_err(ts->dev, "HID get descriptor timed out\n");
> +		rc = -ETIME;
> +		goto error;
> +	}
> +
> +	memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
> +
> +	/* Check HID descriptor length and version */
> +	if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
> +	    le16_to_cpu(desc->bcd_version) != HID_VERSION) {
> +		dev_err(dev, "Unsupported HID version\n");
> +		return -ENODEV;
> +	}
> +
> +	goto exit;
> +
> +error:
> +	mutex_lock(&ts->system_lock);
> +	ts->hid_cmd_state = HID_CMD_DONE;
> +	mutex_unlock(&ts->system_lock);
> +exit:
> +	return rc;
> +}
> +
> +static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size,
> +			int offset)
> +{
> +	tch_abs->ofs = offset / 8;
> +	tch_abs->size = report_size / 8;
> +	if (report_size % 8)
> +		tch_abs->size += 1;
> +	tch_abs->min = 0;
> +	tch_abs->max = 1 << report_size;
> +	tch_abs->bofs = offset - (tch_abs->ofs << 3);
> +
> +	return 0;
> +}
> +
> +static int move_button_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
> +{
> +	memcpy(si->xy_mode, ts->input_buf, BTN_INPUT_HEADER_SIZE);
> +	memcpy(si->xy_data, &ts->input_buf[BTN_INPUT_HEADER_SIZE],
> +	       BTN_REPORT_SIZE);
> +
> +	return 0;
> +}
> +
> +static int move_touch_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
> +{
> +	int max_tch = si->sensing_conf_data.max_tch;
> +	int num_cur_tch;
> +	int length;
> +	struct cyttsp5_tch_abs_params *tch = &si->tch_hdr;
> +
> +	memcpy(si->xy_mode, ts->input_buf, TOUCH_INPUT_HEADER_SIZE);
> +
> +	cyttsp5_get_touch_axis(&num_cur_tch, tch->size,
> +			       tch->max, si->xy_mode + 3 + tch->ofs, tch->bofs);
> +	if (unlikely(num_cur_tch > max_tch))
> +		num_cur_tch = max_tch;
> +
> +	length = num_cur_tch * TOUCH_REPORT_SIZE;
> +
> +	memcpy(si->xy_data, &ts->input_buf[TOUCH_INPUT_HEADER_SIZE], length);
> +
> +	return 0;
> +}
> +
> +static irqreturn_t cyttsp5_handle_irq(int irq, void *handle)
> +{
> +	struct cyttsp5 *ts = handle;
> +	int report_id;
> +	int size;
> +	int rc;
> +
> +	rc = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT);
> +	if (rc)
> +		return IRQ_HANDLED;
> +
> +	size = get_unaligned_le16(&ts->input_buf[0]);
> +
> +	/* check reset */
> +	if (size == 0) {
> +		memcpy(ts->response_buf, ts->input_buf, 2);
> +
> +		mutex_lock(&ts->system_lock);
> +		ts->hid_cmd_state = HID_CMD_DONE;
> +		mutex_unlock(&ts->system_lock);
> +		wake_up(&ts->wait_q);

I'd use spinlock in wait queue and wake_up_locked() instead of a
separate mutex.

> +		return IRQ_HANDLED;
> +	}
> +
> +	report_id = ts->input_buf[2];
> +

	switch(report_id) {
	}

> +	if (report_id == HID_TOUCH_REPORT_ID) {
> +		move_touch_data(ts, &ts->sysinfo);
> +		cyttsp5_mt_attention(ts->dev);
> +	} else if (report_id == HID_BTN_REPORT_ID) {
> +		move_button_data(ts, &ts->sysinfo);
> +		cyttsp5_btn_attention(ts->dev);
> +	} else {
> +		/* It is not an input but a command response */
> +		memcpy(ts->response_buf, ts->input_buf, size);
> +
> +		mutex_lock(&ts->system_lock);
> +		ts->hid_cmd_state = HID_CMD_DONE;
> +		mutex_unlock(&ts->system_lock);
> +		wake_up(&ts->wait_q);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int cyttsp5_deassert_int(struct cyttsp5 *ts)
> +{
> +	u16 size;
> +	u8 buf[2];
> +	int rc;
> +
> +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, 2);
> +	if (rc < 0)
> +		return rc;
> +
> +	size = get_unaligned_le16(&buf[0]);
> +	if (size == 2 || size == 0)
> +		return 0;
> +
> +	return -EINVAL;
> +}
> +
> +static int cyttsp5_fill_all_touch(struct cyttsp5 *ts)
> +{
> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> +
> +	fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16,
> +		     TOUCH_REPORT_DESC_X);
> +	fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16,
> +		     TOUCH_REPORT_DESC_Y);
> +	fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8,
> +		     TOUCH_REPORT_DESC_P);
> +	fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5,
> +		     TOUCH_REPORT_DESC_CONTACTID);
> +	fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5,
> +		     TOUCH_REPORT_DESC_HDR_CONTACTCOUNT);
> +	fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8,
> +		     TOUCH_REPORT_DESC_MAJ);
> +	fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8,
> +		     TOUCH_REPORT_DESC_MIN);
> +
> +	return 0;
> +}
> +
> +static int cyttsp5_startup(struct cyttsp5 *ts)
> +{
> +	int rc;
> +
> +	rc = cyttsp5_deassert_int(ts);
> +	if (rc) {
> +		dev_err(ts->dev, "Error on deassert int r=%d\n", rc);
> +		return -ENODEV;
> +	}
> +
> +	/*
> +	 * Launch the application as the device starts in bootloader mode
> +	 * because of a power-on-reset
> +	 */
> +	rc = cyttsp5_hid_output_bl_launch_app(ts);
> +	if (rc < 0) {
> +		dev_err(ts->dev, "Error on launch app r=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc);
> +	if (rc < 0) {
> +		dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = cyttsp5_fill_all_touch(ts);
> +	if (rc < 0) {
> +		dev_err(ts->dev, "Error on report descriptor r=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = cyttsp5_hid_output_get_sysinfo(ts);
> +	if (rc) {
> +		dev_err(ts->dev, "Error on getting sysinfo r=%d\n", rc);
> +		return rc;
> +	}
> +
> +	return rc;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id cyttsp5_of_match[] = {
> +	{ .compatible = "cypress,cyttsp5", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, cyttsp5_of_match);
> +#endif
> +
> +static const struct i2c_device_id cyttsp5_i2c_id[] = {
> +	{ CYTTSP5_NAME, 0, },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id);
> +
> +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
> +			 const char *name)
> +{
> +	struct cyttsp5 *ts;
> +	struct cyttsp5_sysinfo *si;
> +	int rc = 0, i;
> +
> +	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> +	if (!ts)
> +		return -ENOMEM;
> +
> +	/* Initialize device info */
> +	ts->regmap = regmap;
> +	ts->dev = dev;
> +	si = &ts->sysinfo;
> +	dev_set_drvdata(dev, ts);
> +
> +	/* Initialize mutexes and spinlocks */
> +	mutex_init(&ts->system_lock);
> +
> +	/* Initialize wait queue */
> +	init_waitqueue_head(&ts->wait_q);
> +
> +	/* Reset the gpio to be in a reset state */
> +	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(ts->reset_gpio)) {
> +		rc = PTR_ERR(ts->reset_gpio);
> +		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
> +		return rc;
> +	}
> +	gpiod_set_value(ts->reset_gpio, 1);

Why not request it as GPIOD_OUT_HIGH if you going to activate it
immediately? However it sounds as if you have a reset line that is
active low and you want to driver it low to reset, and then release. In
this case you need to do

	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
	<delay> - chip usually needs to be some time in reset state
	gpiod_set_value(ts->reset_gpio, 0);

and make sure that correct polarity is specified in device tree.

> +
> +	/* Need a delay to have device up */
> +	msleep(20);
> +
> +	rc = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq,
> +				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,

Just use IRQF_ONESHOT and make sure DTS specifies interrupt properly.
BTW,I'd recommend using level, not edge interrupts. It is so easy to
miss an edge.

> +				       name, ts);
> +	if (rc) {
> +		dev_err(dev, "unable to request IRQ\n");
> +		return rc;
> +	}
> +
> +	rc = cyttsp5_startup(ts);
> +	if (rc) {
> +		dev_err(ts->dev, "Fail initial startup r=%d\n", rc);
> +		return rc;
> +	}
> +
> +	rc = cyttsp5_parse_dt_key_code(dev);
> +	if (rc < 0) {
> +		dev_err(ts->dev, "Error while parsing dts %d\n", rc);
> +		return rc;
> +	}
> +
> +	ts->input = devm_input_allocate_device(dev);
> +	if (!ts->input) {
> +		dev_err(dev, "Error, failed to allocate input device\n");
> +		return -ENODEV;
> +	}
> +
> +	ts->input->name = "cyttsp5";
> +	scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
> +	ts->input->phys = ts->phys;
> +	ts->input->dev.parent = ts->dev;
> +	input_set_drvdata(ts->input, ts);
> +
> +	touchscreen_parse_properties(ts->input, true, NULL);
> +
> +	__set_bit(EV_KEY, ts->input->evbit);
> +	for (i = 0; i < si->num_btns; i++)
> +		__set_bit(si->key_code[i], ts->input->keybit);
> +
> +	return cyttsp5_setup_input_device(dev);
> +}
> +
> +static int cyttsp5_i2c_probe(struct i2c_client *client,
> +			     const struct i2c_device_id *id)
> +{
> +	struct regmap *regmap;
> +	static const struct regmap_config config = {
> +		.reg_bits = 8,
> +		.val_bits = 8,
> +	};
> +
> +	regmap = devm_regmap_init_i2c(client, &config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&client->dev, "regmap allocation failed: %ld\n",
> +			PTR_ERR(regmap));
> +		return PTR_ERR(regmap);
> +	}
> +
> +	return cyttsp5_probe(&client->dev, regmap, client->irq, client->name);
> +}
> +
> +static int cyttsp5_remove(struct device *dev)
> +{
> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> +
> +	input_unregister_device(ts->input);

Not needed: you are using managed input device.

> +
> +	return 0;
> +}
> +
> +static int cyttsp5_i2c_remove(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +
> +	return cyttsp5_remove(dev);

Not needed if you remove cyttsp5_remove().

> +}
> +
> +static struct i2c_driver cyttsp5_i2c_driver = {
> +	.driver = {
> +		.name = CYTTSP5_NAME,
> +		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(cyttsp5_of_match),
> +	},
> +	.probe = cyttsp5_i2c_probe,
> +	.remove = cyttsp5_i2c_remove,
> +	.id_table = cyttsp5_i2c_id,
> +};
> +
> +module_i2c_driver(cyttsp5_i2c_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
> +MODULE_AUTHOR("Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>");
> -- 
> 2.11.0
> 

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
  2018-01-22 20:11     ` Marcus Folkesson
@ 2018-01-23  9:33       ` Mylene Josserand
  0 siblings, 0 replies; 14+ messages in thread
From: Mylene Josserand @ 2018-01-23  9:33 UTC (permalink / raw)
  To: Marcus Folkesson
  Cc: dmitry.torokhov, robh+dt, mark.rutland, linux-kernel,
	linux-input, devicetree, thomas.petazzoni, maxime.ripard

Hello Marcus,

Thank you for the review.

Le Mon, 22 Jan 2018 21:11:09 +0100,
Marcus Folkesson <marcus.folkesson@gmail.com> a écrit :

> Mylene,
> 
> On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
> > +++ b/drivers/input/touchscreen/cyttsp5.c
> > @@ -0,0 +1,1110 @@
> > +/*
> > + * Parade TrueTouch(TM) Standard Product V5 Module.
> > + * For use with Parade touchscreen controllers.
> > + *
> > + * Copyright (C) 2015 Parade Technologies
> > + * Copyright (C) 2012-2015 Cypress Semiconductor
> > + * Copyright (C) 2017 Free Electrons
> > + *
> > + * Author: Mylène Josserand <mylene.josserand@free-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2, and only version 2, as published by the
> > + * Free Software Foundation.  
> 
> Please use SPDX license Identifier to describe the license.
> 
> E.g.
> SPDX-License-Identifier: GPL-2.0
> 
> Also, the MODULE_LICENSE means GPL 2.0 or later per module.h and this does
> not match the license description.
> 
> Could you make sure they are in sync?

You are right, I will check that, thanks.

> 
> 
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <asm/unaligned.h>
> > +#include <linux/crc-itu-t.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/gpio.h>
> > +#include <linux/input/mt.h>
> > +#include <linux/input/touchscreen.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>  
> 
> #include <linux/bitops.h>
> 
> since you are using BIT()

okay

> 
> 
> [snip]
> 
> 
> > +static int cyttsp5_setup_input_device(struct device *dev)
> > +{
> > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int max_x, max_y, max_p;
> > +	int max_x_tmp, max_y_tmp;
> > +	int rc;
> > +
> > +	__set_bit(EV_ABS, ts->input->evbit);
> > +	__set_bit(EV_REL, ts->input->evbit);
> > +	__set_bit(EV_KEY, ts->input->evbit);
> > +
> > +	max_x_tmp = si->sensing_conf_data.res_x;
> > +	max_y_tmp = si->sensing_conf_data.res_y;
> > +	max_x = max_y_tmp - 1;
> > +	max_y = max_x_tmp - 1;
> > +	max_p = si->sensing_conf_data.max_z;
> > +
> > +	input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);
> > +
> > +	__set_bit(ABS_MT_POSITION_X, ts->input->absbit);
> > +	__set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
> > +	__set_bit(ABS_MT_PRESSURE, ts->input->absbit);  
> 
> Not needed, input_set_abs_params() will set the bits for you below.

Yes, I will remove it.

> 
> 
> > +
> > +	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
> > +	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
> > +	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
> > +
> > +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
> > +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
> > +
> > +	rc = input_register_device(ts->input);
> > +	if (rc < 0)
> > +		dev_err(dev, "Error, failed register input device r=%d\n", rc);
> > +
> > +	return rc;
> > +}
> > +
> > +  
> 
> [snip]
> 
> > +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
> > +				      struct cyttsp5_hid_desc *desc)
> > +{
> > +	struct device *dev = ts->dev;
> > +	__le16 hid_desc_register = HID_DESC_REG;
> > +	int rc;
> > +	u8 cmd[2];
> > +
> > +	/* Read HID descriptor length and version */
> > +	mutex_lock(&ts->system_lock);
> > +	ts->hid_cmd_state = HID_CMD_BUSY;
> > +	mutex_unlock(&ts->system_lock);
> > +
> > +	/* Set HID descriptor register */
> > +	memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
> > +
> > +	rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
> > +	if (rc < 0) {
> > +		dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
> > +		goto error;
> > +	}
> > +
> > +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > +				msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
> > +	if (!rc) {
> > +		dev_err(ts->dev, "HID get descriptor timed out\n");
> > +		rc = -ETIME;
> > +		goto error;
> > +	}
> > +
> > +	memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
> > +
> > +	/* Check HID descriptor length and version */
> > +	if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
> > +	    le16_to_cpu(desc->bcd_version) != HID_VERSION) {
> > +		dev_err(dev, "Unsupported HID version\n");
> > +		return -ENODEV;  
> 
> Maybe it is supposed to return here, but all other faults use "goto
> error".

Yep, I will use 'goto' instead of 'return' here.

> 
> > +	}
> > +
> > +	goto exit;
> > +
> > +error:
> > +	mutex_lock(&ts->system_lock);
> > +	ts->hid_cmd_state = HID_CMD_DONE;
> > +	mutex_unlock(&ts->system_lock);
> > +exit:
> > +	return rc;
> > +}
> > +  
> 
> [snip]
> 
> > +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
> > +			 const char *name)
> > +{
> > +	struct cyttsp5 *ts;
> > +	struct cyttsp5_sysinfo *si;
> > +	int rc = 0, i;
> > +
> > +	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> > +	if (!ts)
> > +		return -ENOMEM;
> > +
> > +	/* Initialize device info */
> > +	ts->regmap = regmap;
> > +	ts->dev = dev;
> > +	si = &ts->sysinfo;
> > +	dev_set_drvdata(dev, ts);
> > +
> > +	/* Initialize mutexes and spinlocks */  
> 
> No spinlocks here :-)

I forgot to remove the comment from vendor's driver, thanks :)

> 
> > +	mutex_init(&ts->system_lock);
> > +
> > +	/* Initialize wait queue */
> > +	init_waitqueue_head(&ts->wait_q);
> > +
> > +	/* Reset the gpio to be in a reset state */
> > +	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> > +	if (IS_ERR(ts->reset_gpio)) {
> > +		rc = PTR_ERR(ts->reset_gpio);
> > +		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
> > +		return rc;
> > +	}
> > +	gpiod_set_value(ts->reset_gpio, 1);
> > +  
> 
> [snip]
> 
> > +static struct i2c_driver cyttsp5_i2c_driver = {
> > +	.driver = {
> > +		.name = CYTTSP5_NAME,
> > +		.owner = THIS_MODULE,
> > +		.of_match_table = of_match_ptr(cyttsp5_of_match),
> > +	},
> > +	.probe = cyttsp5_i2c_probe,
> > +	.remove = cyttsp5_i2c_remove,
> > +	.id_table = cyttsp5_i2c_id,
> > +};
> > +
> > +module_i2c_driver(cyttsp5_i2c_driver);
> > +
> > +MODULE_LICENSE("GPL");  
> 
> From linux/module.h:
> 
> /*
>  * The following license idents are currently accepted as indicating free
>  * software modules
>  *
>  *	"GPL"				[GNU Public License v2 or later]
>  *	"GPL v2"			[GNU Public License v2]
> 

Okay, noted.

> 
> 
> > +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
> > +MODULE_AUTHOR("Mylène Josserand <mylene.josserand@free-electrons.com>");
> > -- 
> > 2.11.0
> >   
> 
> Best regards
> Marcus Folkesson

Best regards,

-- 
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
  2018-01-23  4:15     ` Dmitry Torokhov
@ 2018-01-23 10:44       ` Mylene Josserand
       [not found]         ` <20180123114459.07cc3404-K8i4uRanGBt8XcdJbWeDu7NAH6kLmebB@public.gmane.org>
  2018-01-23 17:30         ` Dmitry Torokhov
  0 siblings, 2 replies; 14+ messages in thread
From: Mylene Josserand @ 2018-01-23 10:44 UTC (permalink / raw)
  To: Dmitry Torokhov
  Cc: robh+dt, mark.rutland, linux-kernel, linux-input, devicetree,
	thomas.petazzoni, maxime.ripard

Hi Dmitry,

Thank you for the review.

Le Mon, 22 Jan 2018 20:15:03 -0800,
Dmitry Torokhov <dmitry.torokhov@gmail.com> a écrit :

> Hi Mylène,
> 
> On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
> > This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
> > controllers. This driver supports only the I2C bus but it uses regmap
> > so SPI support could be added later.
> > The touchscreen can retrieve some defined zone that are handled as
> > buttons (according to the hardware). That is why it handles
> > button and multitouch events.
> > 
> > Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> > ---
> >  drivers/input/touchscreen/Kconfig   |   16 +
> >  drivers/input/touchscreen/Makefile  |    1 +
> >  drivers/input/touchscreen/cyttsp5.c | 1110 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 1127 insertions(+)
> >  create mode 100644 drivers/input/touchscreen/cyttsp5.c
> > 
> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> > index 0cfdb7cb610e..28eea6d5f1bb 100644
> > --- a/drivers/input/touchscreen/Kconfig
> > +++ b/drivers/input/touchscreen/Kconfig
> > @@ -238,6 +238,22 @@ config TOUCHSCREEN_CYTTSP4_SPI
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called cyttsp4_spi.
> >  
> > +config TOUCHSCREEN_CYTTSP5
> > +	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
> > +	depends on OF  
> 
> Does it have to be? Please use generic device properties
> (device_property_* API) and it can be used with ACPI and static board
> files, of needed.

Okay, I will try with that.

> 
> > +	select REGMAP_I2C
> > +	select CRC_ITU_T
> > +	help
> > +	  Driver for Parade TrueTouch Standard Product
> > +	  Generation 5 touchscreen controllers.
> > +	  I2C bus interface support only.
> > +
> > +	  Say Y here if you have a Cypress Gen5 touchscreen.
> > +	  If unsure, say N.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called cyttsp5.
> > +
> >  config TOUCHSCREEN_DA9034
> >  	tristate "Touchscreen support for Dialog Semiconductor DA9034"
> >  	depends on PMIC_DA903X
> > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> > index d2a2b3b7af27..e7d124901dd9 100644
> > --- a/drivers/input/touchscreen/Makefile
> > +++ b/drivers/input/touchscreen/Makefile
> > @@ -26,6 +26,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
> >  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
> >  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
> >  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
> > +obj-$(CONFIG_TOUCHSCREEN_CYTTSP5)	+= cyttsp5.o
> >  obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
> >  obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
> >  obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
> > diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
> > new file mode 100644
> > index 000000000000..a41feea2cd5a
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/cyttsp5.c
> > @@ -0,0 +1,1110 @@
> > +/*
> > + * Parade TrueTouch(TM) Standard Product V5 Module.
> > + * For use with Parade touchscreen controllers.
> > + *
> > + * Copyright (C) 2015 Parade Technologies
> > + * Copyright (C) 2012-2015 Cypress Semiconductor
> > + * Copyright (C) 2017 Free Electrons
> > + *
> > + * Author: Mylène Josserand <mylene.josserand@free-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2, and only version 2, as published by the
> > + * Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <asm/unaligned.h>
> > +#include <linux/crc-itu-t.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/gpio.h>
> > +#include <linux/input/mt.h>
> > +#include <linux/input/touchscreen.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#define CYTTSP5_NAME				"cyttsp5"
> > +#define CY_I2C_DATA_SIZE			(2 * 256)
> > +#define HID_VERSION				0x0100
> > +#define CY_MAX_INPUT				512
> > +#define CYTTSP5_PREALLOCATED_CMD_BUFFER	32
> > +#define CY_BITS_PER_BTN			1
> > +#define CY_NUM_BTN_EVENT_ID			((1 << CY_BITS_PER_BTN) - 1)
> > +
> > +#define MAX_AREA				255
> > +#define HID_OUTPUT_BL_SOP			0x1
> > +#define HID_OUTPUT_BL_EOP			0x17
> > +#define HID_OUTPUT_BL_LAUNCH_APP		0x3B
> > +#define HID_OUTPUT_BL_LAUNCH_APP_SIZE		11
> > +#define HID_OUTPUT_GET_SYSINFO			0x2
> > +#define HID_OUTPUT_GET_SYSINFO_SIZE		5
> > +
> > +#define HID_DESC_REG				0x1
> > +#define HID_INPUT_REG				0x3
> > +#define HID_OUTPUT_REG				0x4
> > +
> > +#define REPORT_ID_TOUCH			0x1
> > +#define REPORT_ID_BTN				0x3
> > +#define REPORT_SIZE_5				5
> > +#define REPORT_SIZE_8				8
> > +#define REPORT_SIZE_16				16
> > +
> > +/* Touch reports offsets */
> > +/* Header offsets */
> > +#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT	16
> > +/* Record offsets */
> > +#define TOUCH_REPORT_DESC_CONTACTID		8
> > +#define TOUCH_REPORT_DESC_X			16
> > +#define TOUCH_REPORT_DESC_Y			32
> > +#define TOUCH_REPORT_DESC_P			48
> > +#define TOUCH_REPORT_DESC_MAJ			56
> > +#define TOUCH_REPORT_DESC_MIN			64
> > +
> > +/* HID */
> > +#define HID_TOUCH_REPORT_ID			0x1
> > +#define HID_BTN_REPORT_ID			0x3
> > +#define HID_APP_RESPONSE_REPORT_ID		0x1F
> > +#define HID_APP_OUTPUT_REPORT_ID		0x2F
> > +#define HID_BL_RESPONSE_REPORT_ID		0x30
> > +#define HID_BL_OUTPUT_REPORT_ID		0x40
> > +
> > +#define HID_OUTPUT_RESPONSE_REPORT_OFFSET	2
> > +#define HID_OUTPUT_RESPONSE_CMD_OFFSET		4
> > +#define HID_OUTPUT_RESPONSE_CMD_MASK		0x7F
> > +
> > +#define HID_SYSINFO_SENSING_OFFSET		33
> > +#define HID_SYSINFO_BTN_OFFSET			48
> > +#define HID_SYSINFO_BTN_MASK			0xFF
> > +#define HID_SYSINFO_MAX_BTN			8
> > +
> > +/*  Timeout in ms */
> > +#define CY_HID_OUTPUT_TIMEOUT			200
> > +#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT	3000
> > +#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT	4000
> > +
> > +/* maximum number of concurrent tracks */
> > +#define TOUCH_REPORT_SIZE			10
> > +#define TOUCH_INPUT_HEADER_SIZE		7
> > +#define BTN_REPORT_SIZE			9
> > +#define BTN_INPUT_HEADER_SIZE			5
> > +
> > +/* All usage pages for Touch Report */
> > +#define TOUCH_REPORT_USAGE_PG_X		0x00010030
> > +#define TOUCH_REPORT_USAGE_PG_Y		0x00010031
> > +#define TOUCH_REPORT_USAGE_PG_P		0x000D0030
> > +#define TOUCH_REPORT_USAGE_PG_CONTACTID	0x000D0051
> > +#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT	0x000D0054
> > +#define TOUCH_REPORT_USAGE_PG_MAJ		0xFF010062
> > +#define TOUCH_REPORT_USAGE_PG_MIN		0xFF010063
> > +#define TOUCH_COL_USAGE_PG			0x000D0022
> > +
> > +/* helpers */
> > +#define HI_BYTE(x)				(u8)(((x) >> 8) & 0xFF)
> > +#define LOW_BYTE(x)				(u8)((x) & 0xFF)
> > +
> > +/* System Information interface definitions */
> > +struct cyttsp5_sensing_conf_data_dev {
> > +	u8 electrodes_x;
> > +	u8 electrodes_y;
> > +	__le16 len_x;
> > +	__le16 len_y;
> > +	__le16 res_x;
> > +	__le16 res_y;
> > +	__le16 max_z;
> > +	u8 origin_x;
> > +	u8 origin_y;
> > +	u8 btn;
> > +	u8 scan_mode;
> > +	u8 max_num_of_tch_per_refresh_cycle;
> > +} __packed;
> > +
> > +struct cyttsp5_sensing_conf_data {
> > +	u16 res_x;
> > +	u16 res_y;
> > +	u16 max_z;
> > +	u16 len_x;
> > +	u16 len_y;
> > +	u8 origin_x;
> > +	u8 origin_y;
> > +	u8 max_tch;
> > +};
> > +
> > +enum { HID_CMD_DONE, HID_CMD_BUSY } hid_cmd_state;
> > +
> > +enum cyttsp5_tch_abs {	/* for ordering within the extracted touch data array */
> > +	CY_TCH_X,	/* X */
> > +	CY_TCH_Y,	/* Y */
> > +	CY_TCH_P,	/* P (Z) */
> > +	CY_TCH_T,	/* TOUCH ID */
> > +	CY_TCH_MAJ,	/* TOUCH_MAJOR */
> > +	CY_TCH_MIN,	/* TOUCH_MINOR */
> > +	CY_TCH_NUM_ABS,
> > +};
> > +
> > +struct cyttsp5_tch_abs_params {
> > +	size_t ofs;	/* abs byte offset */
> > +	size_t size;	/* size in bits */
> > +	size_t min;	/* min value */
> > +	size_t max;	/* max value */
> > +	size_t bofs;	/* bit offset */
> > +};
> > +
> > +struct cyttsp5_touch {
> > +	int hdr;
> > +	int abs[CY_TCH_NUM_ABS];
> > +};
> > +
> > +struct cyttsp5_sysinfo {
> > +	struct cyttsp5_sensing_conf_data sensing_conf_data;
> > +	int num_btns;
> > +	struct cyttsp5_tch_abs_params tch_hdr;
> > +	struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
> > +	u32 key_code[HID_SYSINFO_MAX_BTN];
> > +	u8 *xy_mode;
> > +	u8 *xy_data;
> > +};
> > +
> > +struct cyttsp5_hid_desc {
> > +	__le16 hid_desc_len;
> > +	u8 packet_id;
> > +	u8 reserved_byte;
> > +	__le16 bcd_version;
> > +	__le16 report_desc_len;
> > +	__le16 report_desc_register;
> > +	__le16 input_register;
> > +	__le16 max_input_len;
> > +	__le16 output_register;
> > +	__le16 max_output_len;
> > +	__le16 command_register;
> > +	__le16 data_register;
> > +	__le16 vendor_id;
> > +	__le16 product_id;
> > +	__le16 version_id;
> > +	u8 reserved[4];
> > +} __packed;
> > +
> > +struct cyttsp5 {
> > +	struct device *dev;
> > +	struct mutex system_lock;
> > +	wait_queue_head_t wait_q;
> > +	struct cyttsp5_sysinfo sysinfo;
> > +	int hid_cmd_state;
> > +	struct cyttsp5_hid_desc hid_desc;
> > +	u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER];
> > +	u8 input_buf[CY_MAX_INPUT];
> > +	u8 response_buf[CY_MAX_INPUT];
> > +	struct gpio_desc *reset_gpio;
> > +	struct input_dev *input;
> > +	char phys[NAME_MAX];
> > +	int num_prv_rec;
> > +	struct regmap *regmap;
> > +};
> > +
> > +/*
> > + * For what understood in the datasheet, the register does not
> > + * matter. For consistency, used the Input Register address
> > + * but it does mean anything to the device. The important data
> > + * to send is the I2C address
> > + */
> > +static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max)
> > +{
> > +	int rc;
> > +	u32 size;
> > +	u8 temp[2];
> > +
> > +	if (!buf)
> > +		return -EINVAL;  
> 
> Is it really possible? This is not a publicly facing API but private
> driver data, do you ever happen to call it with NULL?

hm, I do not think so but I will check that.

> 
> > +
> > +	/* Read the frame to retrieve the size */
> > +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, 2);
> > +	if (rc < 0)
> > +		return rc;  
> 
> Can we call this kind of variables "error" pelase?

Sure.

> 
> > +
> > +	size = get_unaligned_le16(temp);
> > +	if (!size || size == 2)
> > +		return 0;
> > +
> > +	if (size > max)
> > +		return -EINVAL;
> > +
> > +	/* Get the real value */
> > +	return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size);
> > +}
> > +
> > +static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
> > +			 size_t size)
> > +{
> > +	u8 cmd[size + 1];
> > +
> > +	/* High bytes of register address needed as first byte of cmd */
> > +	cmd[0] = HI_BYTE(reg);
> > +
> > +	/* Copy the rest of the data */
> > +	if (data)
> > +		memcpy(&cmd[1], data, size);
> > +
> > +	/* The hardware wants to receive a frame with the address register  
> 
> The multiline comment block should start with "/*" on a separate line
> please.

I will change that.

> 
> > +	 * contains in the first two bytes. As the regmap_write function
> > +	 * add the register adresse in the frame, we use the LOW_BYTE as
> > +	 * first frame byte for the address register and the first
> > +	 * data byte is the high register + left of the cmd to send
> > +	 */
> > +	return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
> > +}
> > +
> > +static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
> > +			       unsigned long *ids)
> > +{
> > +	int t;
> > +
> > +	for (t = 0; t < max_slots; t++) {  
> 
> 	for_each_set_bit() {
> 	}

I did not know this macro, I will try that.

> 
> > +		if (test_bit(t, ids))
> > +			continue;
> > +		input_mt_slot(input, t);
> > +		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
> > +	}
> > +
> > +	input_sync(input);
> > +}
> > +
> > +static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
> > +{
> > +	int t;
> > +
> > +	if (ts->num_prv_rec == 0)
> > +		return;  
> 
> Do you need this check? The caller checks the same condition.

True, I will remove it.

> 
> > +
> > +	for (t = 0; t < max_slots; t++) {
> > +		input_mt_slot(ts->input, t);
> > +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
> > +	}
> > +}
> > +
> > +static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
> > +{
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int max = si->tch_abs[CY_TCH_T].max;
> > +
> > +	if (ts->num_prv_rec != 0) {
> > +		cyttsp5_report_slot_liftoff(ts, max);
> > +		input_sync(ts->input);
> > +		ts->num_prv_rec = 0;
> > +	}
> > +}
> > +
> > +static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
> > +				   int bofs)
> > +{
> > +	int nbyte;
> > +	int next;
> > +
> > +	for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
> > +		*axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
> > +
> > +	*axis &= max - 1;
> > +}
> > +
> > +static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
> > +				     struct cyttsp5_touch *touch, u8 *xy_data)
> > +{
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	enum cyttsp5_tch_abs abs;
> > +
> > +	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
> > +		cyttsp5_get_touch_axis(&touch->abs[abs],
> > +				       si->tch_abs[abs].size,
> > +				       si->tch_abs[abs].max,
> > +				       xy_data + si->tch_abs[abs].ofs,
> > +				       si->tch_abs[abs].bofs);
> > +	}
> > +}
> > +
> > +static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
> > +				   struct cyttsp5_touch *tch, int num_cur_tch)
> > +{
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int i, t = 0;
> > +	DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
> > +	u8 *tch_addr;
> > +	int tmp;
> > +
> > +	bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
> > +	memset(tch->abs, 0, sizeof(tch->abs));
> > +
> > +	for (i = 0; i < num_cur_tch; i++) {
> > +		tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
> > +		cyttsp5_get_touch_record(ts, tch, tch_addr);
> > +
> > +		/* Convert MAJOR/MINOR from mm to resolution */
> > +		tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
> > +		tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
> > +		tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
> > +		tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
> > +
> > +		t = tch->abs[CY_TCH_T];
> > +		input_mt_slot(ts->input, t);
> > +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
> > +		__set_bit(t, ids);
> > +
> > +		/* position and pressure fields */
> > +		input_report_abs(ts->input, ABS_MT_POSITION_X,
> > +				 tch->abs[CY_TCH_X]);
> > +		input_report_abs(ts->input, ABS_MT_POSITION_Y,
> > +				 tch->abs[CY_TCH_Y]);
> > +		input_report_abs(ts->input, ABS_MT_PRESSURE,
> > +				 tch->abs[CY_TCH_P]);
> > +
> > +		/* Get the extended touch fields */
> > +		input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
> > +				 tch->abs[CY_TCH_MAJ]);
> > +		input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
> > +				 tch->abs[CY_TCH_MIN]);
> > +	}
> > +
> > +	cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
> > +
> > +	ts->num_prv_rec = num_cur_tch;
> > +}
> > +
> > +/* read xy_data for all current touches */
> > +static int cyttsp5_xy_worker(struct cyttsp5 *ts)
> > +{
> > +	struct device *dev = ts->dev;
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int max_tch = si->sensing_conf_data.max_tch;
> > +	struct cyttsp5_touch tch;
> > +	u8 num_cur_tch;
> > +
> > +	cyttsp5_get_touch_axis(&tch.hdr, si->tch_hdr.size,
> > +			       si->tch_hdr.max,
> > +			       si->xy_mode + 3 + si->tch_hdr.ofs,
> > +			       si->tch_hdr.bofs);
> > +
> > +	num_cur_tch = tch.hdr;
> > +	if (num_cur_tch > max_tch) {
> > +		dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch);
> > +		num_cur_tch = max_tch;
> > +	}
> > +
> > +	if (num_cur_tch == 0 && ts->num_prv_rec == 0)
> > +		return 0;
> > +
> > +	/* extract xy_data for all currently reported touches */
> > +	if (num_cur_tch)
> > +		cyttsp5_get_mt_touches(ts, &tch, num_cur_tch);
> > +	else
> > +		cyttsp5_mt_lift_all(ts);
> > +
> > +	return 0;
> > +}
> > +
> > +static int cyttsp5_mt_attention(struct device *dev)
> > +{
> > +	struct cyttsp5 *ts = dev_get_drvdata(dev);  
> 
> Why don't you pass ts into cyttsp5_mt_attention?

Yep, you are right, I will update it.

> 
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int rc;
> > +
> > +	if (si->xy_mode[2] != HID_TOUCH_REPORT_ID)
> > +		return 0;
> > +
> > +	/* core handles handshake */
> > +	rc = cyttsp5_xy_worker(ts);
> > +	if (rc < 0)
> > +		dev_err(dev, "xy_worker error r=%d\n", rc);
> > +
> > +	return rc;
> > +}
> > +
> > +static int cyttsp5_setup_input_device(struct device *dev)
> > +{
> > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int max_x, max_y, max_p;
> > +	int max_x_tmp, max_y_tmp;
> > +	int rc;
> > +
> > +	__set_bit(EV_ABS, ts->input->evbit);
> > +	__set_bit(EV_REL, ts->input->evbit);
> > +	__set_bit(EV_KEY, ts->input->evbit);
> > +
> > +	max_x_tmp = si->sensing_conf_data.res_x;
> > +	max_y_tmp = si->sensing_conf_data.res_y;
> > +	max_x = max_y_tmp - 1;
> > +	max_y = max_x_tmp - 1;
> > +	max_p = si->sensing_conf_data.max_z;
> > +
> > +	input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);  
> 
> Error handling.

Thanks.

> 
> > +
> > +	__set_bit(ABS_MT_POSITION_X, ts->input->absbit);
> > +	__set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
> > +	__set_bit(ABS_MT_PRESSURE, ts->input->absbit);
> > +
> > +	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
> > +	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
> > +	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
> > +
> > +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
> > +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);  
> 
> You might want to use the standard DT touchscreen properties and
> reporting functions to support axis inversion and swapping of axes.

Hm, I am not sure to see what you are referring to.
Could you explain me what you think of?

> 
> > +
> > +	rc = input_register_device(ts->input);
> > +	if (rc < 0)
> > +		dev_err(dev, "Error, failed register input device r=%d\n", rc);
> > +
> > +	return rc;
> > +}
> > +
> > +#ifdef CONFIG_OF
> > +static int cyttsp5_parse_dt_key_code(struct device *dev)
> > +{
> > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	struct device_node *np;
> > +	int i;
> > +
> > +	np = dev->of_node;
> > +	if (!np)
> > +		return -EINVAL;
> > +
> > +	if (!si->num_btns)
> > +		return 0;
> > +
> > +	/* Initialize the button to RESERVED */
> > +	for (i = 0; i < si->num_btns; i++)
> > +		si->key_code[i] = KEY_RESERVED;
> > +
> > +	return of_property_read_u32_array(np, "linux,keycodes",
> > +				   si->key_code, si->num_btns);
> > +}
> > +#else
> > +static int cyttsp5_parse_dt_key_code(struct device *dev)
> > +{
> > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int i;
> > +
> > +	if (!si->num_btns)
> > +		return 0;
> > +
> > +	/* Initialize the button to RESERVED */
> > +	for (i = 0; i < si->num_btns; i++)
> > +		si->key_code[i] = KEY_RESERVED;
> > +
> > +	return 0;
> > +}
> > +#endif
> > +
> > +static int cyttsp5_btn_attention(struct device *dev)
> > +{
> > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int cur_btn;
> > +	int cur_btn_state;
> > +
> > +	if (si->xy_mode[2] != HID_BTN_REPORT_ID || !si->num_btns)
> > +		return 0;
> > +
> > +	/* extract button press/release touch information */
> > +	for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) {
> > +		/* Get current button state */
> > +		cur_btn_state = (si->xy_data[0] >> (cur_btn * CY_BITS_PER_BTN))
> > +			& CY_NUM_BTN_EVENT_ID;
> > +
> > +		input_report_key(ts->input, si->key_code[cur_btn],
> > +				 cur_btn_state);
> > +		input_sync(ts->input);  
> 
> You do not need to sen sync after each button, send it once after all
> buttons sent.

Oh, yes, I will do that!

> 
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static u16 cyttsp5_compute_crc(u8 *buf, u32 size)
> > +{
> > +	u16 remainder = 0xFFFF;
> > +	u16 xor_mask = 0x0000;
> > +	u32 index;
> > +	u32 byte_value;
> > +	u32 table_index;
> > +	u32 crc_bit_width = sizeof(u16) * 8;
> > +
> > +	/* Divide the message by polynomial, via the table. */
> > +	for (index = 0; index < size; index++) {
> > +		byte_value = buf[index];
> > +		table_index = ((byte_value >> 4) & 0x0F)
> > +			^ (remainder >> (crc_bit_width - 4));
> > +		remainder = crc_itu_t_table[table_index]
> > +			^ (remainder << 4);
> > +		table_index = (byte_value & 0x0F)
> > +			^ (remainder >> (crc_bit_width - 4));
> > +		remainder = crc_itu_t_table[table_index]
> > +			^ (remainder << 4);
> > +	}
> > +
> > +	/* Perform the final remainder CRC. */
> > +	return remainder ^ xor_mask;
> > +}
> > +
> > +static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code)
> > +{
> > +	u16 size, crc;
> > +	u8 status, offset;
> > +	int command_code;
> > +
> > +	size = get_unaligned_le16(&ts->response_buf[0]);
> > +
> > +	if (!size)
> > +		return 0;
> > +
> > +	offset = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET];
> > +
> > +	if (offset == HID_BL_RESPONSE_REPORT_ID) {
> > +		if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) {
> > +			dev_err(ts->dev, "HID output response, wrong SOP\n");
> > +			return -EPROTO;
> > +		}
> > +
> > +		if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) {
> > +			dev_err(ts->dev, "HID output response, wrong EOP\n");
> > +			return -EPROTO;
> > +		}
> > +
> > +		crc = cyttsp5_compute_crc(&ts->response_buf[4], size - 7);
> > +		if (ts->response_buf[size - 3] != LOW_BYTE(crc) ||
> > +		    ts->response_buf[size - 2] != HI_BYTE(crc)) {
> > +			dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n",
> > +				crc);
> > +			return -EPROTO;
> > +		}
> > +
> > +		status = ts->response_buf[5];
> > +		if (status) {
> > +			dev_err(ts->dev, "HID output response, ERROR:%d\n",
> > +				status);
> > +			return -EPROTO;
> > +		}
> > +	}
> > +
> > +	if (offset == HID_APP_RESPONSE_REPORT_ID) {
> > +		command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET]
> > +			& HID_OUTPUT_RESPONSE_CMD_MASK;
> > +		if (command_code != code) {
> > +			dev_err(ts->dev,
> > +				"HID output response, wrong command_code:%X\n",
> > +				command_code);
> > +			return -EPROTO;
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts)
> > +{
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +	int i;
> > +	unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET]
> > +		& HID_SYSINFO_BTN_MASK;
> > +
> > +	si->num_btns = 0;
> > +	for (i = 0; i < HID_SYSINFO_MAX_BTN; i++) {
> > +		if (btns & BIT(i))
> > +			si->num_btns++;
> > +	}  
> 
> 	si->num_btns = hweight8(ts->response_buf[HID_SYSINFO_BTN_OFFSET]);

Great, I will try that!

> 
> > +}
> > +
> > +static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts)
> > +{
> > +	struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data;
> > +	struct cyttsp5_sensing_conf_data_dev *scd_dev =
> > +		(struct cyttsp5_sensing_conf_data_dev *)
> > +		&ts->response_buf[HID_SYSINFO_SENSING_OFFSET];
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +
> > +	cyttsp5_si_get_btn_data(ts);
> > +
> > +	scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle;
> > +	scd->res_x = get_unaligned_le16(&scd_dev->res_x);
> > +	scd->res_y = get_unaligned_le16(&scd_dev->res_y);
> > +	scd->max_z = get_unaligned_le16(&scd_dev->max_z);
> > +	scd->len_x = get_unaligned_le16(&scd_dev->len_x);
> > +	scd->len_y = get_unaligned_le16(&scd_dev->len_y);
> > +
> > +	si->xy_data = devm_kzalloc(ts->dev, scd->max_tch * TOUCH_REPORT_SIZE,
> > +				   GFP_KERNEL);
> > +	if (!si->xy_data)
> > +		return -ENOMEM;
> > +
> > +	si->xy_mode = devm_kzalloc(ts->dev, TOUCH_INPUT_HEADER_SIZE,
> > +				   GFP_KERNEL);
> > +	if (!si->xy_mode)
> > +		return -ENOMEM;  
> 
> Why do we need these 2 allocated separately form the driver data?

xy_mode and particularly xy_data are used to retrieve buttons or touch
data that we received from the input buffer (see move_button_data()
and move_touch_data()). I guess that I can try to remove them, if you
want.

> 
> > +
> > +	return 0;
> > +}
> > +
> > +static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts)
> > +{
> > +	int rc;
> > +	u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE];
> > +
> > +	ts->hid_cmd_state = HID_CMD_BUSY;
> > +
> > +	/* HI bytes of Output register address */
> > +	cmd[0] = LOW_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
> > +	cmd[1] = HI_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
> > +	cmd[2] = HID_APP_OUTPUT_REPORT_ID;
> > +	cmd[3] = 0x0; /* Reserved */
> > +	cmd[4] = HID_OUTPUT_GET_SYSINFO;
> > +
> > +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
> > +			   HID_OUTPUT_GET_SYSINFO_SIZE);
> > +	if (rc) {
> > +		dev_err(ts->dev, "Failed to write command %d", rc);
> > +		goto error;
> > +	}
> > +
> > +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > +				msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT));
> > +	if (!rc) {
> > +		dev_err(ts->dev, "HID output cmd execution timed out\n");
> > +		rc = -ETIME;
> > +		goto error;
> > +	}
> > +
> > +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO);
> > +	if (rc) {
> > +		dev_err(ts->dev, "Validation of the response failed\n");
> > +		goto error;
> > +	}
> > +
> > +	return cyttsp5_get_sysinfo_regs(ts);
> > +
> > +error:
> > +	mutex_lock(&ts->system_lock);
> > +	ts->hid_cmd_state = HID_CMD_DONE;
> > +	mutex_unlock(&ts->system_lock);
> > +	return rc;
> > +}
> > +
> > +static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts)
> > +{
> > +	int rc;
> > +	u8 cmd[HID_OUTPUT_BL_LAUNCH_APP];
> > +	u16 crc;
> > +
> > +	mutex_lock(&ts->system_lock);
> > +	ts->hid_cmd_state = HID_CMD_BUSY;
> > +	mutex_unlock(&ts->system_lock);
> > +
> > +	cmd[0] = LOW_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> > +	cmd[1] = HI_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> > +	cmd[2] = HID_BL_OUTPUT_REPORT_ID;
> > +	cmd[3] = 0x0; /* Reserved */
> > +	cmd[4] = HID_OUTPUT_BL_SOP;
> > +	cmd[5] = HID_OUTPUT_BL_LAUNCH_APP;
> > +	cmd[6] = 0x0; /* Low bytes of data */
> > +	cmd[7] = 0x0; /* Hi bytes of data */
> > +	crc = cyttsp5_compute_crc(&cmd[4], 4);
> > +	cmd[8] = LOW_BYTE(crc);
> > +	cmd[9] = HI_BYTE(crc);
> > +	cmd[10] = HID_OUTPUT_BL_EOP;
> > +
> > +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
> > +			   HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> > +	if (rc) {
> > +		dev_err(ts->dev, "Failed to write command %d", rc);
> > +		goto error;
> > +	}
> > +
> > +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > +				msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT));
> > +	if (!rc) {
> > +		dev_err(ts->dev, "HID output cmd execution timed out\n");
> > +		rc = -ETIME;
> > +		goto error;
> > +	}
> > +
> > +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP);
> > +	if (rc) {
> > +		dev_err(ts->dev, "Validation of the response failed\n");
> > +		goto error;
> > +	}
> > +
> > +	return rc;
> > +
> > +error:
> > +	mutex_lock(&ts->system_lock);
> > +	ts->hid_cmd_state = HID_CMD_DONE;
> > +	mutex_unlock(&ts->system_lock);
> > +
> > +	return rc;
> > +}
> > +
> > +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
> > +				      struct cyttsp5_hid_desc *desc)
> > +{
> > +	struct device *dev = ts->dev;
> > +	__le16 hid_desc_register = HID_DESC_REG;
> > +	int rc;
> > +	u8 cmd[2];
> > +
> > +	/* Read HID descriptor length and version */
> > +	mutex_lock(&ts->system_lock);
> > +	ts->hid_cmd_state = HID_CMD_BUSY;
> > +	mutex_unlock(&ts->system_lock);
> > +
> > +	/* Set HID descriptor register */
> > +	memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
> > +
> > +	rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
> > +	if (rc < 0) {
> > +		dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
> > +		goto error;
> > +	}
> > +
> > +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > +				msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
> > +	if (!rc) {
> > +		dev_err(ts->dev, "HID get descriptor timed out\n");
> > +		rc = -ETIME;
> > +		goto error;
> > +	}
> > +
> > +	memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
> > +
> > +	/* Check HID descriptor length and version */
> > +	if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
> > +	    le16_to_cpu(desc->bcd_version) != HID_VERSION) {
> > +		dev_err(dev, "Unsupported HID version\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	goto exit;
> > +
> > +error:
> > +	mutex_lock(&ts->system_lock);
> > +	ts->hid_cmd_state = HID_CMD_DONE;
> > +	mutex_unlock(&ts->system_lock);
> > +exit:
> > +	return rc;
> > +}
> > +
> > +static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size,
> > +			int offset)
> > +{
> > +	tch_abs->ofs = offset / 8;
> > +	tch_abs->size = report_size / 8;
> > +	if (report_size % 8)
> > +		tch_abs->size += 1;
> > +	tch_abs->min = 0;
> > +	tch_abs->max = 1 << report_size;
> > +	tch_abs->bofs = offset - (tch_abs->ofs << 3);
> > +
> > +	return 0;
> > +}
> > +
> > +static int move_button_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
> > +{
> > +	memcpy(si->xy_mode, ts->input_buf, BTN_INPUT_HEADER_SIZE);
> > +	memcpy(si->xy_data, &ts->input_buf[BTN_INPUT_HEADER_SIZE],
> > +	       BTN_REPORT_SIZE);
> > +
> > +	return 0;
> > +}
> > +
> > +static int move_touch_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
> > +{
> > +	int max_tch = si->sensing_conf_data.max_tch;
> > +	int num_cur_tch;
> > +	int length;
> > +	struct cyttsp5_tch_abs_params *tch = &si->tch_hdr;
> > +
> > +	memcpy(si->xy_mode, ts->input_buf, TOUCH_INPUT_HEADER_SIZE);
> > +
> > +	cyttsp5_get_touch_axis(&num_cur_tch, tch->size,
> > +			       tch->max, si->xy_mode + 3 + tch->ofs, tch->bofs);
> > +	if (unlikely(num_cur_tch > max_tch))
> > +		num_cur_tch = max_tch;
> > +
> > +	length = num_cur_tch * TOUCH_REPORT_SIZE;
> > +
> > +	memcpy(si->xy_data, &ts->input_buf[TOUCH_INPUT_HEADER_SIZE], length);
> > +
> > +	return 0;
> > +}
> > +
> > +static irqreturn_t cyttsp5_handle_irq(int irq, void *handle)
> > +{
> > +	struct cyttsp5 *ts = handle;
> > +	int report_id;
> > +	int size;
> > +	int rc;
> > +
> > +	rc = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT);
> > +	if (rc)
> > +		return IRQ_HANDLED;
> > +
> > +	size = get_unaligned_le16(&ts->input_buf[0]);
> > +
> > +	/* check reset */
> > +	if (size == 0) {
> > +		memcpy(ts->response_buf, ts->input_buf, 2);
> > +
> > +		mutex_lock(&ts->system_lock);
> > +		ts->hid_cmd_state = HID_CMD_DONE;
> > +		mutex_unlock(&ts->system_lock);
> > +		wake_up(&ts->wait_q);  
> 
> I'd use spinlock in wait queue and wake_up_locked() instead of a
> separate mutex.

Hum, okay, I will try that.

> 
> > +		return IRQ_HANDLED;
> > +	}
> > +
> > +	report_id = ts->input_buf[2];
> > +  
> 
> 	switch(report_id) {
> 	}

Yep, it will be easier to understand.

> 
> > +	if (report_id == HID_TOUCH_REPORT_ID) {
> > +		move_touch_data(ts, &ts->sysinfo);
> > +		cyttsp5_mt_attention(ts->dev);
> > +	} else if (report_id == HID_BTN_REPORT_ID) {
> > +		move_button_data(ts, &ts->sysinfo);
> > +		cyttsp5_btn_attention(ts->dev);
> > +	} else {
> > +		/* It is not an input but a command response */
> > +		memcpy(ts->response_buf, ts->input_buf, size);
> > +
> > +		mutex_lock(&ts->system_lock);
> > +		ts->hid_cmd_state = HID_CMD_DONE;
> > +		mutex_unlock(&ts->system_lock);
> > +		wake_up(&ts->wait_q);
> > +	}
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int cyttsp5_deassert_int(struct cyttsp5 *ts)
> > +{
> > +	u16 size;
> > +	u8 buf[2];
> > +	int rc;
> > +
> > +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, 2);
> > +	if (rc < 0)
> > +		return rc;
> > +
> > +	size = get_unaligned_le16(&buf[0]);
> > +	if (size == 2 || size == 0)
> > +		return 0;
> > +
> > +	return -EINVAL;
> > +}
> > +
> > +static int cyttsp5_fill_all_touch(struct cyttsp5 *ts)
> > +{
> > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > +
> > +	fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16,
> > +		     TOUCH_REPORT_DESC_X);
> > +	fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16,
> > +		     TOUCH_REPORT_DESC_Y);
> > +	fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8,
> > +		     TOUCH_REPORT_DESC_P);
> > +	fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5,
> > +		     TOUCH_REPORT_DESC_CONTACTID);
> > +	fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5,
> > +		     TOUCH_REPORT_DESC_HDR_CONTACTCOUNT);
> > +	fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8,
> > +		     TOUCH_REPORT_DESC_MAJ);
> > +	fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8,
> > +		     TOUCH_REPORT_DESC_MIN);
> > +
> > +	return 0;
> > +}
> > +
> > +static int cyttsp5_startup(struct cyttsp5 *ts)
> > +{
> > +	int rc;
> > +
> > +	rc = cyttsp5_deassert_int(ts);
> > +	if (rc) {
> > +		dev_err(ts->dev, "Error on deassert int r=%d\n", rc);
> > +		return -ENODEV;
> > +	}
> > +
> > +	/*
> > +	 * Launch the application as the device starts in bootloader mode
> > +	 * because of a power-on-reset
> > +	 */
> > +	rc = cyttsp5_hid_output_bl_launch_app(ts);
> > +	if (rc < 0) {
> > +		dev_err(ts->dev, "Error on launch app r=%d\n", rc);
> > +		return rc;
> > +	}
> > +
> > +	rc = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc);
> > +	if (rc < 0) {
> > +		dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", rc);
> > +		return rc;
> > +	}
> > +
> > +	rc = cyttsp5_fill_all_touch(ts);
> > +	if (rc < 0) {
> > +		dev_err(ts->dev, "Error on report descriptor r=%d\n", rc);
> > +		return rc;
> > +	}
> > +
> > +	rc = cyttsp5_hid_output_get_sysinfo(ts);
> > +	if (rc) {
> > +		dev_err(ts->dev, "Error on getting sysinfo r=%d\n", rc);
> > +		return rc;
> > +	}
> > +
> > +	return rc;
> > +}
> > +
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id cyttsp5_of_match[] = {
> > +	{ .compatible = "cypress,cyttsp5", },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(of, cyttsp5_of_match);
> > +#endif
> > +
> > +static const struct i2c_device_id cyttsp5_i2c_id[] = {
> > +	{ CYTTSP5_NAME, 0, },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id);
> > +
> > +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
> > +			 const char *name)
> > +{
> > +	struct cyttsp5 *ts;
> > +	struct cyttsp5_sysinfo *si;
> > +	int rc = 0, i;
> > +
> > +	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> > +	if (!ts)
> > +		return -ENOMEM;
> > +
> > +	/* Initialize device info */
> > +	ts->regmap = regmap;
> > +	ts->dev = dev;
> > +	si = &ts->sysinfo;
> > +	dev_set_drvdata(dev, ts);
> > +
> > +	/* Initialize mutexes and spinlocks */
> > +	mutex_init(&ts->system_lock);
> > +
> > +	/* Initialize wait queue */
> > +	init_waitqueue_head(&ts->wait_q);
> > +
> > +	/* Reset the gpio to be in a reset state */
> > +	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> > +	if (IS_ERR(ts->reset_gpio)) {
> > +		rc = PTR_ERR(ts->reset_gpio);
> > +		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
> > +		return rc;
> > +	}
> > +	gpiod_set_value(ts->reset_gpio, 1);  
> 
> Why not request it as GPIOD_OUT_HIGH if you going to activate it
> immediately? However it sounds as if you have a reset line that is
> active low and you want to driver it low to reset, and then release. In
> this case you need to do
> 
> 	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> 	<delay> - chip usually needs to be some time in reset state
> 	gpiod_set_value(ts->reset_gpio, 0);
> 
> and make sure that correct polarity is specified in device tree.

Okay, I will update it too.

> 
> > +
> > +	/* Need a delay to have device up */
> > +	msleep(20);
> > +
> > +	rc = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq,
> > +				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,  
> 
> Just use IRQF_ONESHOT and make sure DTS specifies interrupt properly.
> BTW,I'd recommend using level, not edge interrupts. It is so easy to
> miss an edge.

Okay, thank you for the advice.

> 
> > +				       name, ts);
> > +	if (rc) {
> > +		dev_err(dev, "unable to request IRQ\n");
> > +		return rc;
> > +	}
> > +
> > +	rc = cyttsp5_startup(ts);
> > +	if (rc) {
> > +		dev_err(ts->dev, "Fail initial startup r=%d\n", rc);
> > +		return rc;
> > +	}
> > +
> > +	rc = cyttsp5_parse_dt_key_code(dev);
> > +	if (rc < 0) {
> > +		dev_err(ts->dev, "Error while parsing dts %d\n", rc);
> > +		return rc;
> > +	}
> > +
> > +	ts->input = devm_input_allocate_device(dev);
> > +	if (!ts->input) {
> > +		dev_err(dev, "Error, failed to allocate input device\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	ts->input->name = "cyttsp5";
> > +	scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
> > +	ts->input->phys = ts->phys;
> > +	ts->input->dev.parent = ts->dev;
> > +	input_set_drvdata(ts->input, ts);
> > +
> > +	touchscreen_parse_properties(ts->input, true, NULL);
> > +
> > +	__set_bit(EV_KEY, ts->input->evbit);
> > +	for (i = 0; i < si->num_btns; i++)
> > +		__set_bit(si->key_code[i], ts->input->keybit);
> > +
> > +	return cyttsp5_setup_input_device(dev);
> > +}
> > +
> > +static int cyttsp5_i2c_probe(struct i2c_client *client,
> > +			     const struct i2c_device_id *id)
> > +{
> > +	struct regmap *regmap;
> > +	static const struct regmap_config config = {
> > +		.reg_bits = 8,
> > +		.val_bits = 8,
> > +	};
> > +
> > +	regmap = devm_regmap_init_i2c(client, &config);
> > +	if (IS_ERR(regmap)) {
> > +		dev_err(&client->dev, "regmap allocation failed: %ld\n",
> > +			PTR_ERR(regmap));
> > +		return PTR_ERR(regmap);
> > +	}
> > +
> > +	return cyttsp5_probe(&client->dev, regmap, client->irq, client->name);
> > +}
> > +
> > +static int cyttsp5_remove(struct device *dev)
> > +{
> > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > +
> > +	input_unregister_device(ts->input);  
> 
> Not needed: you are using managed input device.

You are right, thanks.

> 
> > +
> > +	return 0;
> > +}
> > +
> > +static int cyttsp5_i2c_remove(struct i2c_client *client)
> > +{
> > +	struct device *dev = &client->dev;
> > +
> > +	return cyttsp5_remove(dev);  
> 
> Not needed if you remove cyttsp5_remove().

Sure.

> 
> > +}
> > +
> > +static struct i2c_driver cyttsp5_i2c_driver = {
> > +	.driver = {
> > +		.name = CYTTSP5_NAME,
> > +		.owner = THIS_MODULE,
> > +		.of_match_table = of_match_ptr(cyttsp5_of_match),
> > +	},
> > +	.probe = cyttsp5_i2c_probe,
> > +	.remove = cyttsp5_i2c_remove,
> > +	.id_table = cyttsp5_i2c_id,
> > +};
> > +
> > +module_i2c_driver(cyttsp5_i2c_driver);
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
> > +MODULE_AUTHOR("Mylène Josserand <mylene.josserand@free-electrons.com>");
> > -- 
> > 2.11.0
> >   
> 
> Thanks.
> 

Best regards,

-- 
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
       [not found]         ` <20180123114459.07cc3404-K8i4uRanGBt8XcdJbWeDu7NAH6kLmebB@public.gmane.org>
@ 2018-01-23 10:50           ` landyn.lawrence-jHc5sQ61u836K7/ahGyk6A
  0 siblings, 0 replies; 14+ messages in thread
From: landyn.lawrence-jHc5sQ61u836K7/ahGyk6A @ 2018-01-23 10:50 UTC (permalink / raw)
  To: Mylene Josserand, Dmitry Torokhov
  Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-input-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8

Hey,

thanks for the great work on this one!

Best regards

On 01/23/2018 11:44 AM, Mylene Josserand wrote:
> Hi Dmitry,
> 
> Thank you for the review.
> 
> Le Mon, 22 Jan 2018 20:15:03 -0800,
> Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> a écrit :
> 
>> Hi Mylène,
>>
>> On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
>>> This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
>>> controllers. This driver supports only the I2C bus but it uses regmap
>>> so SPI support could be added later.
>>> The touchscreen can retrieve some defined zone that are handled as
>>> buttons (according to the hardware). That is why it handles
>>> button and multitouch events.
>>>
>>> Reviewed-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
>>> Signed-off-by: Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
>>> ---
>>>   drivers/input/touchscreen/Kconfig   |   16 +
>>>   drivers/input/touchscreen/Makefile  |    1 +
>>>   drivers/input/touchscreen/cyttsp5.c | 1110 +++++++++++++++++++++++++++++++++++
>>>   3 files changed, 1127 insertions(+)
>>>   create mode 100644 drivers/input/touchscreen/cyttsp5.c
>>>
>>> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
>>> index 0cfdb7cb610e..28eea6d5f1bb 100644
>>> --- a/drivers/input/touchscreen/Kconfig
>>> +++ b/drivers/input/touchscreen/Kconfig
>>> @@ -238,6 +238,22 @@ config TOUCHSCREEN_CYTTSP4_SPI
>>>   	  To compile this driver as a module, choose M here: the
>>>   	  module will be called cyttsp4_spi.
>>>   
>>> +config TOUCHSCREEN_CYTTSP5
>>> +	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
>>> +	depends on OF
>>
>> Does it have to be? Please use generic device properties
>> (device_property_* API) and it can be used with ACPI and static board
>> files, of needed.
> 
> Okay, I will try with that.
> 
>>
>>> +	select REGMAP_I2C
>>> +	select CRC_ITU_T
>>> +	help
>>> +	  Driver for Parade TrueTouch Standard Product
>>> +	  Generation 5 touchscreen controllers.
>>> +	  I2C bus interface support only.
>>> +
>>> +	  Say Y here if you have a Cypress Gen5 touchscreen.
>>> +	  If unsure, say N.
>>> +
>>> +	  To compile this driver as a module, choose M here: the
>>> +	  module will be called cyttsp5.
>>> +
>>>   config TOUCHSCREEN_DA9034
>>>   	tristate "Touchscreen support for Dialog Semiconductor DA9034"
>>>   	depends on PMIC_DA903X
>>> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
>>> index d2a2b3b7af27..e7d124901dd9 100644
>>> --- a/drivers/input/touchscreen/Makefile
>>> +++ b/drivers/input/touchscreen/Makefile
>>> @@ -26,6 +26,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
>>>   obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
>>>   obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
>>>   obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
>>> +obj-$(CONFIG_TOUCHSCREEN_CYTTSP5)	+= cyttsp5.o
>>>   obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
>>>   obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
>>>   obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
>>> diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
>>> new file mode 100644
>>> index 000000000000..a41feea2cd5a
>>> --- /dev/null
>>> +++ b/drivers/input/touchscreen/cyttsp5.c
>>> @@ -0,0 +1,1110 @@
>>> +/*
>>> + * Parade TrueTouch(TM) Standard Product V5 Module.
>>> + * For use with Parade touchscreen controllers.
>>> + *
>>> + * Copyright (C) 2015 Parade Technologies
>>> + * Copyright (C) 2012-2015 Cypress Semiconductor
>>> + * Copyright (C) 2017 Free Electrons
>>> + *
>>> + * Author: Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License
>>> + * version 2, and only version 2, as published by the
>>> + * Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + */
>>> +
>>> +#include <asm/unaligned.h>
>>> +#include <linux/crc-itu-t.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/device.h>
>>> +#include <linux/gpio.h>
>>> +#include <linux/input/mt.h>
>>> +#include <linux/input/touchscreen.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/i2c.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/regmap.h>
>>> +
>>> +#define CYTTSP5_NAME				"cyttsp5"
>>> +#define CY_I2C_DATA_SIZE			(2 * 256)
>>> +#define HID_VERSION				0x0100
>>> +#define CY_MAX_INPUT				512
>>> +#define CYTTSP5_PREALLOCATED_CMD_BUFFER	32
>>> +#define CY_BITS_PER_BTN			1
>>> +#define CY_NUM_BTN_EVENT_ID			((1 << CY_BITS_PER_BTN) - 1)
>>> +
>>> +#define MAX_AREA				255
>>> +#define HID_OUTPUT_BL_SOP			0x1
>>> +#define HID_OUTPUT_BL_EOP			0x17
>>> +#define HID_OUTPUT_BL_LAUNCH_APP		0x3B
>>> +#define HID_OUTPUT_BL_LAUNCH_APP_SIZE		11
>>> +#define HID_OUTPUT_GET_SYSINFO			0x2
>>> +#define HID_OUTPUT_GET_SYSINFO_SIZE		5
>>> +
>>> +#define HID_DESC_REG				0x1
>>> +#define HID_INPUT_REG				0x3
>>> +#define HID_OUTPUT_REG				0x4
>>> +
>>> +#define REPORT_ID_TOUCH			0x1
>>> +#define REPORT_ID_BTN				0x3
>>> +#define REPORT_SIZE_5				5
>>> +#define REPORT_SIZE_8				8
>>> +#define REPORT_SIZE_16				16
>>> +
>>> +/* Touch reports offsets */
>>> +/* Header offsets */
>>> +#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT	16
>>> +/* Record offsets */
>>> +#define TOUCH_REPORT_DESC_CONTACTID		8
>>> +#define TOUCH_REPORT_DESC_X			16
>>> +#define TOUCH_REPORT_DESC_Y			32
>>> +#define TOUCH_REPORT_DESC_P			48
>>> +#define TOUCH_REPORT_DESC_MAJ			56
>>> +#define TOUCH_REPORT_DESC_MIN			64
>>> +
>>> +/* HID */
>>> +#define HID_TOUCH_REPORT_ID			0x1
>>> +#define HID_BTN_REPORT_ID			0x3
>>> +#define HID_APP_RESPONSE_REPORT_ID		0x1F
>>> +#define HID_APP_OUTPUT_REPORT_ID		0x2F
>>> +#define HID_BL_RESPONSE_REPORT_ID		0x30
>>> +#define HID_BL_OUTPUT_REPORT_ID		0x40
>>> +
>>> +#define HID_OUTPUT_RESPONSE_REPORT_OFFSET	2
>>> +#define HID_OUTPUT_RESPONSE_CMD_OFFSET		4
>>> +#define HID_OUTPUT_RESPONSE_CMD_MASK		0x7F
>>> +
>>> +#define HID_SYSINFO_SENSING_OFFSET		33
>>> +#define HID_SYSINFO_BTN_OFFSET			48
>>> +#define HID_SYSINFO_BTN_MASK			0xFF
>>> +#define HID_SYSINFO_MAX_BTN			8
>>> +
>>> +/*  Timeout in ms */
>>> +#define CY_HID_OUTPUT_TIMEOUT			200
>>> +#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT	3000
>>> +#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT	4000
>>> +
>>> +/* maximum number of concurrent tracks */
>>> +#define TOUCH_REPORT_SIZE			10
>>> +#define TOUCH_INPUT_HEADER_SIZE		7
>>> +#define BTN_REPORT_SIZE			9
>>> +#define BTN_INPUT_HEADER_SIZE			5
>>> +
>>> +/* All usage pages for Touch Report */
>>> +#define TOUCH_REPORT_USAGE_PG_X		0x00010030
>>> +#define TOUCH_REPORT_USAGE_PG_Y		0x00010031
>>> +#define TOUCH_REPORT_USAGE_PG_P		0x000D0030
>>> +#define TOUCH_REPORT_USAGE_PG_CONTACTID	0x000D0051
>>> +#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT	0x000D0054
>>> +#define TOUCH_REPORT_USAGE_PG_MAJ		0xFF010062
>>> +#define TOUCH_REPORT_USAGE_PG_MIN		0xFF010063
>>> +#define TOUCH_COL_USAGE_PG			0x000D0022
>>> +
>>> +/* helpers */
>>> +#define HI_BYTE(x)				(u8)(((x) >> 8) & 0xFF)
>>> +#define LOW_BYTE(x)				(u8)((x) & 0xFF)
>>> +
>>> +/* System Information interface definitions */
>>> +struct cyttsp5_sensing_conf_data_dev {
>>> +	u8 electrodes_x;
>>> +	u8 electrodes_y;
>>> +	__le16 len_x;
>>> +	__le16 len_y;
>>> +	__le16 res_x;
>>> +	__le16 res_y;
>>> +	__le16 max_z;
>>> +	u8 origin_x;
>>> +	u8 origin_y;
>>> +	u8 btn;
>>> +	u8 scan_mode;
>>> +	u8 max_num_of_tch_per_refresh_cycle;
>>> +} __packed;
>>> +
>>> +struct cyttsp5_sensing_conf_data {
>>> +	u16 res_x;
>>> +	u16 res_y;
>>> +	u16 max_z;
>>> +	u16 len_x;
>>> +	u16 len_y;
>>> +	u8 origin_x;
>>> +	u8 origin_y;
>>> +	u8 max_tch;
>>> +};
>>> +
>>> +enum { HID_CMD_DONE, HID_CMD_BUSY } hid_cmd_state;
>>> +
>>> +enum cyttsp5_tch_abs {	/* for ordering within the extracted touch data array */
>>> +	CY_TCH_X,	/* X */
>>> +	CY_TCH_Y,	/* Y */
>>> +	CY_TCH_P,	/* P (Z) */
>>> +	CY_TCH_T,	/* TOUCH ID */
>>> +	CY_TCH_MAJ,	/* TOUCH_MAJOR */
>>> +	CY_TCH_MIN,	/* TOUCH_MINOR */
>>> +	CY_TCH_NUM_ABS,
>>> +};
>>> +
>>> +struct cyttsp5_tch_abs_params {
>>> +	size_t ofs;	/* abs byte offset */
>>> +	size_t size;	/* size in bits */
>>> +	size_t min;	/* min value */
>>> +	size_t max;	/* max value */
>>> +	size_t bofs;	/* bit offset */
>>> +};
>>> +
>>> +struct cyttsp5_touch {
>>> +	int hdr;
>>> +	int abs[CY_TCH_NUM_ABS];
>>> +};
>>> +
>>> +struct cyttsp5_sysinfo {
>>> +	struct cyttsp5_sensing_conf_data sensing_conf_data;
>>> +	int num_btns;
>>> +	struct cyttsp5_tch_abs_params tch_hdr;
>>> +	struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
>>> +	u32 key_code[HID_SYSINFO_MAX_BTN];
>>> +	u8 *xy_mode;
>>> +	u8 *xy_data;
>>> +};
>>> +
>>> +struct cyttsp5_hid_desc {
>>> +	__le16 hid_desc_len;
>>> +	u8 packet_id;
>>> +	u8 reserved_byte;
>>> +	__le16 bcd_version;
>>> +	__le16 report_desc_len;
>>> +	__le16 report_desc_register;
>>> +	__le16 input_register;
>>> +	__le16 max_input_len;
>>> +	__le16 output_register;
>>> +	__le16 max_output_len;
>>> +	__le16 command_register;
>>> +	__le16 data_register;
>>> +	__le16 vendor_id;
>>> +	__le16 product_id;
>>> +	__le16 version_id;
>>> +	u8 reserved[4];
>>> +} __packed;
>>> +
>>> +struct cyttsp5 {
>>> +	struct device *dev;
>>> +	struct mutex system_lock;
>>> +	wait_queue_head_t wait_q;
>>> +	struct cyttsp5_sysinfo sysinfo;
>>> +	int hid_cmd_state;
>>> +	struct cyttsp5_hid_desc hid_desc;
>>> +	u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER];
>>> +	u8 input_buf[CY_MAX_INPUT];
>>> +	u8 response_buf[CY_MAX_INPUT];
>>> +	struct gpio_desc *reset_gpio;
>>> +	struct input_dev *input;
>>> +	char phys[NAME_MAX];
>>> +	int num_prv_rec;
>>> +	struct regmap *regmap;
>>> +};
>>> +
>>> +/*
>>> + * For what understood in the datasheet, the register does not
>>> + * matter. For consistency, used the Input Register address
>>> + * but it does mean anything to the device. The important data
>>> + * to send is the I2C address
>>> + */
>>> +static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max)
>>> +{
>>> +	int rc;
>>> +	u32 size;
>>> +	u8 temp[2];
>>> +
>>> +	if (!buf)
>>> +		return -EINVAL;
>>
>> Is it really possible? This is not a publicly facing API but private
>> driver data, do you ever happen to call it with NULL?
> 
> hm, I do not think so but I will check that.
> 
>>
>>> +
>>> +	/* Read the frame to retrieve the size */
>>> +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, 2);
>>> +	if (rc < 0)
>>> +		return rc;
>>
>> Can we call this kind of variables "error" pelase?
> 
> Sure.
> 
>>
>>> +
>>> +	size = get_unaligned_le16(temp);
>>> +	if (!size || size == 2)
>>> +		return 0;
>>> +
>>> +	if (size > max)
>>> +		return -EINVAL;
>>> +
>>> +	/* Get the real value */
>>> +	return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size);
>>> +}
>>> +
>>> +static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
>>> +			 size_t size)
>>> +{
>>> +	u8 cmd[size + 1];
>>> +
>>> +	/* High bytes of register address needed as first byte of cmd */
>>> +	cmd[0] = HI_BYTE(reg);
>>> +
>>> +	/* Copy the rest of the data */
>>> +	if (data)
>>> +		memcpy(&cmd[1], data, size);
>>> +
>>> +	/* The hardware wants to receive a frame with the address register
>>
>> The multiline comment block should start with "/*" on a separate line
>> please.
> 
> I will change that.
> 
>>
>>> +	 * contains in the first two bytes. As the regmap_write function
>>> +	 * add the register adresse in the frame, we use the LOW_BYTE as
>>> +	 * first frame byte for the address register and the first
>>> +	 * data byte is the high register + left of the cmd to send
>>> +	 */
>>> +	return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
>>> +}
>>> +
>>> +static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
>>> +			       unsigned long *ids)
>>> +{
>>> +	int t;
>>> +
>>> +	for (t = 0; t < max_slots; t++) {
>>
>> 	for_each_set_bit() {
>> 	}
> 
> I did not know this macro, I will try that.
> 
>>
>>> +		if (test_bit(t, ids))
>>> +			continue;
>>> +		input_mt_slot(input, t);
>>> +		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
>>> +	}
>>> +
>>> +	input_sync(input);
>>> +}
>>> +
>>> +static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
>>> +{
>>> +	int t;
>>> +
>>> +	if (ts->num_prv_rec == 0)
>>> +		return;
>>
>> Do you need this check? The caller checks the same condition.
> 
> True, I will remove it.
> 
>>
>>> +
>>> +	for (t = 0; t < max_slots; t++) {
>>> +		input_mt_slot(ts->input, t);
>>> +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
>>> +	}
>>> +}
>>> +
>>> +static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
>>> +{
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int max = si->tch_abs[CY_TCH_T].max;
>>> +
>>> +	if (ts->num_prv_rec != 0) {
>>> +		cyttsp5_report_slot_liftoff(ts, max);
>>> +		input_sync(ts->input);
>>> +		ts->num_prv_rec = 0;
>>> +	}
>>> +}
>>> +
>>> +static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
>>> +				   int bofs)
>>> +{
>>> +	int nbyte;
>>> +	int next;
>>> +
>>> +	for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
>>> +		*axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
>>> +
>>> +	*axis &= max - 1;
>>> +}
>>> +
>>> +static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
>>> +				     struct cyttsp5_touch *touch, u8 *xy_data)
>>> +{
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	enum cyttsp5_tch_abs abs;
>>> +
>>> +	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
>>> +		cyttsp5_get_touch_axis(&touch->abs[abs],
>>> +				       si->tch_abs[abs].size,
>>> +				       si->tch_abs[abs].max,
>>> +				       xy_data + si->tch_abs[abs].ofs,
>>> +				       si->tch_abs[abs].bofs);
>>> +	}
>>> +}
>>> +
>>> +static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
>>> +				   struct cyttsp5_touch *tch, int num_cur_tch)
>>> +{
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int i, t = 0;
>>> +	DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
>>> +	u8 *tch_addr;
>>> +	int tmp;
>>> +
>>> +	bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
>>> +	memset(tch->abs, 0, sizeof(tch->abs));
>>> +
>>> +	for (i = 0; i < num_cur_tch; i++) {
>>> +		tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
>>> +		cyttsp5_get_touch_record(ts, tch, tch_addr);
>>> +
>>> +		/* Convert MAJOR/MINOR from mm to resolution */
>>> +		tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
>>> +		tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
>>> +		tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
>>> +		tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
>>> +
>>> +		t = tch->abs[CY_TCH_T];
>>> +		input_mt_slot(ts->input, t);
>>> +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
>>> +		__set_bit(t, ids);
>>> +
>>> +		/* position and pressure fields */
>>> +		input_report_abs(ts->input, ABS_MT_POSITION_X,
>>> +				 tch->abs[CY_TCH_X]);
>>> +		input_report_abs(ts->input, ABS_MT_POSITION_Y,
>>> +				 tch->abs[CY_TCH_Y]);
>>> +		input_report_abs(ts->input, ABS_MT_PRESSURE,
>>> +				 tch->abs[CY_TCH_P]);
>>> +
>>> +		/* Get the extended touch fields */
>>> +		input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
>>> +				 tch->abs[CY_TCH_MAJ]);
>>> +		input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
>>> +				 tch->abs[CY_TCH_MIN]);
>>> +	}
>>> +
>>> +	cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
>>> +
>>> +	ts->num_prv_rec = num_cur_tch;
>>> +}
>>> +
>>> +/* read xy_data for all current touches */
>>> +static int cyttsp5_xy_worker(struct cyttsp5 *ts)
>>> +{
>>> +	struct device *dev = ts->dev;
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int max_tch = si->sensing_conf_data.max_tch;
>>> +	struct cyttsp5_touch tch;
>>> +	u8 num_cur_tch;
>>> +
>>> +	cyttsp5_get_touch_axis(&tch.hdr, si->tch_hdr.size,
>>> +			       si->tch_hdr.max,
>>> +			       si->xy_mode + 3 + si->tch_hdr.ofs,
>>> +			       si->tch_hdr.bofs);
>>> +
>>> +	num_cur_tch = tch.hdr;
>>> +	if (num_cur_tch > max_tch) {
>>> +		dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch);
>>> +		num_cur_tch = max_tch;
>>> +	}
>>> +
>>> +	if (num_cur_tch == 0 && ts->num_prv_rec == 0)
>>> +		return 0;
>>> +
>>> +	/* extract xy_data for all currently reported touches */
>>> +	if (num_cur_tch)
>>> +		cyttsp5_get_mt_touches(ts, &tch, num_cur_tch);
>>> +	else
>>> +		cyttsp5_mt_lift_all(ts);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int cyttsp5_mt_attention(struct device *dev)
>>> +{
>>> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
>>
>> Why don't you pass ts into cyttsp5_mt_attention?
> 
> Yep, you are right, I will update it.
> 
>>
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int rc;
>>> +
>>> +	if (si->xy_mode[2] != HID_TOUCH_REPORT_ID)
>>> +		return 0;
>>> +
>>> +	/* core handles handshake */
>>> +	rc = cyttsp5_xy_worker(ts);
>>> +	if (rc < 0)
>>> +		dev_err(dev, "xy_worker error r=%d\n", rc);
>>> +
>>> +	return rc;
>>> +}
>>> +
>>> +static int cyttsp5_setup_input_device(struct device *dev)
>>> +{
>>> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int max_x, max_y, max_p;
>>> +	int max_x_tmp, max_y_tmp;
>>> +	int rc;
>>> +
>>> +	__set_bit(EV_ABS, ts->input->evbit);
>>> +	__set_bit(EV_REL, ts->input->evbit);
>>> +	__set_bit(EV_KEY, ts->input->evbit);
>>> +
>>> +	max_x_tmp = si->sensing_conf_data.res_x;
>>> +	max_y_tmp = si->sensing_conf_data.res_y;
>>> +	max_x = max_y_tmp - 1;
>>> +	max_y = max_x_tmp - 1;
>>> +	max_p = si->sensing_conf_data.max_z;
>>> +
>>> +	input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);
>>
>> Error handling.
> 
> Thanks.
> 
>>
>>> +
>>> +	__set_bit(ABS_MT_POSITION_X, ts->input->absbit);
>>> +	__set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
>>> +	__set_bit(ABS_MT_PRESSURE, ts->input->absbit);
>>> +
>>> +	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
>>> +	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
>>> +	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
>>> +
>>> +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
>>> +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);
>>
>> You might want to use the standard DT touchscreen properties and
>> reporting functions to support axis inversion and swapping of axes.
> 
> Hm, I am not sure to see what you are referring to.
> Could you explain me what you think of?
> 
>>
>>> +
>>> +	rc = input_register_device(ts->input);
>>> +	if (rc < 0)
>>> +		dev_err(dev, "Error, failed register input device r=%d\n", rc);
>>> +
>>> +	return rc;
>>> +}
>>> +
>>> +#ifdef CONFIG_OF
>>> +static int cyttsp5_parse_dt_key_code(struct device *dev)
>>> +{
>>> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	struct device_node *np;
>>> +	int i;
>>> +
>>> +	np = dev->of_node;
>>> +	if (!np)
>>> +		return -EINVAL;
>>> +
>>> +	if (!si->num_btns)
>>> +		return 0;
>>> +
>>> +	/* Initialize the button to RESERVED */
>>> +	for (i = 0; i < si->num_btns; i++)
>>> +		si->key_code[i] = KEY_RESERVED;
>>> +
>>> +	return of_property_read_u32_array(np, "linux,keycodes",
>>> +				   si->key_code, si->num_btns);
>>> +}
>>> +#else
>>> +static int cyttsp5_parse_dt_key_code(struct device *dev)
>>> +{
>>> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int i;
>>> +
>>> +	if (!si->num_btns)
>>> +		return 0;
>>> +
>>> +	/* Initialize the button to RESERVED */
>>> +	for (i = 0; i < si->num_btns; i++)
>>> +		si->key_code[i] = KEY_RESERVED;
>>> +
>>> +	return 0;
>>> +}
>>> +#endif
>>> +
>>> +static int cyttsp5_btn_attention(struct device *dev)
>>> +{
>>> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int cur_btn;
>>> +	int cur_btn_state;
>>> +
>>> +	if (si->xy_mode[2] != HID_BTN_REPORT_ID || !si->num_btns)
>>> +		return 0;
>>> +
>>> +	/* extract button press/release touch information */
>>> +	for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) {
>>> +		/* Get current button state */
>>> +		cur_btn_state = (si->xy_data[0] >> (cur_btn * CY_BITS_PER_BTN))
>>> +			& CY_NUM_BTN_EVENT_ID;
>>> +
>>> +		input_report_key(ts->input, si->key_code[cur_btn],
>>> +				 cur_btn_state);
>>> +		input_sync(ts->input);
>>
>> You do not need to sen sync after each button, send it once after all
>> buttons sent.
> 
> Oh, yes, I will do that!
> 
>>
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static u16 cyttsp5_compute_crc(u8 *buf, u32 size)
>>> +{
>>> +	u16 remainder = 0xFFFF;
>>> +	u16 xor_mask = 0x0000;
>>> +	u32 index;
>>> +	u32 byte_value;
>>> +	u32 table_index;
>>> +	u32 crc_bit_width = sizeof(u16) * 8;
>>> +
>>> +	/* Divide the message by polynomial, via the table. */
>>> +	for (index = 0; index < size; index++) {
>>> +		byte_value = buf[index];
>>> +		table_index = ((byte_value >> 4) & 0x0F)
>>> +			^ (remainder >> (crc_bit_width - 4));
>>> +		remainder = crc_itu_t_table[table_index]
>>> +			^ (remainder << 4);
>>> +		table_index = (byte_value & 0x0F)
>>> +			^ (remainder >> (crc_bit_width - 4));
>>> +		remainder = crc_itu_t_table[table_index]
>>> +			^ (remainder << 4);
>>> +	}
>>> +
>>> +	/* Perform the final remainder CRC. */
>>> +	return remainder ^ xor_mask;
>>> +}
>>> +
>>> +static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code)
>>> +{
>>> +	u16 size, crc;
>>> +	u8 status, offset;
>>> +	int command_code;
>>> +
>>> +	size = get_unaligned_le16(&ts->response_buf[0]);
>>> +
>>> +	if (!size)
>>> +		return 0;
>>> +
>>> +	offset = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET];
>>> +
>>> +	if (offset == HID_BL_RESPONSE_REPORT_ID) {
>>> +		if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) {
>>> +			dev_err(ts->dev, "HID output response, wrong SOP\n");
>>> +			return -EPROTO;
>>> +		}
>>> +
>>> +		if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) {
>>> +			dev_err(ts->dev, "HID output response, wrong EOP\n");
>>> +			return -EPROTO;
>>> +		}
>>> +
>>> +		crc = cyttsp5_compute_crc(&ts->response_buf[4], size - 7);
>>> +		if (ts->response_buf[size - 3] != LOW_BYTE(crc) ||
>>> +		    ts->response_buf[size - 2] != HI_BYTE(crc)) {
>>> +			dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n",
>>> +				crc);
>>> +			return -EPROTO;
>>> +		}
>>> +
>>> +		status = ts->response_buf[5];
>>> +		if (status) {
>>> +			dev_err(ts->dev, "HID output response, ERROR:%d\n",
>>> +				status);
>>> +			return -EPROTO;
>>> +		}
>>> +	}
>>> +
>>> +	if (offset == HID_APP_RESPONSE_REPORT_ID) {
>>> +		command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET]
>>> +			& HID_OUTPUT_RESPONSE_CMD_MASK;
>>> +		if (command_code != code) {
>>> +			dev_err(ts->dev,
>>> +				"HID output response, wrong command_code:%X\n",
>>> +				command_code);
>>> +			return -EPROTO;
>>> +		}
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts)
>>> +{
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +	int i;
>>> +	unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET]
>>> +		& HID_SYSINFO_BTN_MASK;
>>> +
>>> +	si->num_btns = 0;
>>> +	for (i = 0; i < HID_SYSINFO_MAX_BTN; i++) {
>>> +		if (btns & BIT(i))
>>> +			si->num_btns++;
>>> +	}
>>
>> 	si->num_btns = hweight8(ts->response_buf[HID_SYSINFO_BTN_OFFSET]);
> 
> Great, I will try that!
> 
>>
>>> +}
>>> +
>>> +static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts)
>>> +{
>>> +	struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data;
>>> +	struct cyttsp5_sensing_conf_data_dev *scd_dev =
>>> +		(struct cyttsp5_sensing_conf_data_dev *)
>>> +		&ts->response_buf[HID_SYSINFO_SENSING_OFFSET];
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +
>>> +	cyttsp5_si_get_btn_data(ts);
>>> +
>>> +	scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle;
>>> +	scd->res_x = get_unaligned_le16(&scd_dev->res_x);
>>> +	scd->res_y = get_unaligned_le16(&scd_dev->res_y);
>>> +	scd->max_z = get_unaligned_le16(&scd_dev->max_z);
>>> +	scd->len_x = get_unaligned_le16(&scd_dev->len_x);
>>> +	scd->len_y = get_unaligned_le16(&scd_dev->len_y);
>>> +
>>> +	si->xy_data = devm_kzalloc(ts->dev, scd->max_tch * TOUCH_REPORT_SIZE,
>>> +				   GFP_KERNEL);
>>> +	if (!si->xy_data)
>>> +		return -ENOMEM;
>>> +
>>> +	si->xy_mode = devm_kzalloc(ts->dev, TOUCH_INPUT_HEADER_SIZE,
>>> +				   GFP_KERNEL);
>>> +	if (!si->xy_mode)
>>> +		return -ENOMEM;
>>
>> Why do we need these 2 allocated separately form the driver data?
> 
> xy_mode and particularly xy_data are used to retrieve buttons or touch
> data that we received from the input buffer (see move_button_data()
> and move_touch_data()). I guess that I can try to remove them, if you
> want.
> 
>>
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts)
>>> +{
>>> +	int rc;
>>> +	u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE];
>>> +
>>> +	ts->hid_cmd_state = HID_CMD_BUSY;
>>> +
>>> +	/* HI bytes of Output register address */
>>> +	cmd[0] = LOW_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
>>> +	cmd[1] = HI_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
>>> +	cmd[2] = HID_APP_OUTPUT_REPORT_ID;
>>> +	cmd[3] = 0x0; /* Reserved */
>>> +	cmd[4] = HID_OUTPUT_GET_SYSINFO;
>>> +
>>> +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
>>> +			   HID_OUTPUT_GET_SYSINFO_SIZE);
>>> +	if (rc) {
>>> +		dev_err(ts->dev, "Failed to write command %d", rc);
>>> +		goto error;
>>> +	}
>>> +
>>> +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
>>> +				msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT));
>>> +	if (!rc) {
>>> +		dev_err(ts->dev, "HID output cmd execution timed out\n");
>>> +		rc = -ETIME;
>>> +		goto error;
>>> +	}
>>> +
>>> +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO);
>>> +	if (rc) {
>>> +		dev_err(ts->dev, "Validation of the response failed\n");
>>> +		goto error;
>>> +	}
>>> +
>>> +	return cyttsp5_get_sysinfo_regs(ts);
>>> +
>>> +error:
>>> +	mutex_lock(&ts->system_lock);
>>> +	ts->hid_cmd_state = HID_CMD_DONE;
>>> +	mutex_unlock(&ts->system_lock);
>>> +	return rc;
>>> +}
>>> +
>>> +static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts)
>>> +{
>>> +	int rc;
>>> +	u8 cmd[HID_OUTPUT_BL_LAUNCH_APP];
>>> +	u16 crc;
>>> +
>>> +	mutex_lock(&ts->system_lock);
>>> +	ts->hid_cmd_state = HID_CMD_BUSY;
>>> +	mutex_unlock(&ts->system_lock);
>>> +
>>> +	cmd[0] = LOW_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
>>> +	cmd[1] = HI_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
>>> +	cmd[2] = HID_BL_OUTPUT_REPORT_ID;
>>> +	cmd[3] = 0x0; /* Reserved */
>>> +	cmd[4] = HID_OUTPUT_BL_SOP;
>>> +	cmd[5] = HID_OUTPUT_BL_LAUNCH_APP;
>>> +	cmd[6] = 0x0; /* Low bytes of data */
>>> +	cmd[7] = 0x0; /* Hi bytes of data */
>>> +	crc = cyttsp5_compute_crc(&cmd[4], 4);
>>> +	cmd[8] = LOW_BYTE(crc);
>>> +	cmd[9] = HI_BYTE(crc);
>>> +	cmd[10] = HID_OUTPUT_BL_EOP;
>>> +
>>> +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
>>> +			   HID_OUTPUT_BL_LAUNCH_APP_SIZE);
>>> +	if (rc) {
>>> +		dev_err(ts->dev, "Failed to write command %d", rc);
>>> +		goto error;
>>> +	}
>>> +
>>> +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
>>> +				msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT));
>>> +	if (!rc) {
>>> +		dev_err(ts->dev, "HID output cmd execution timed out\n");
>>> +		rc = -ETIME;
>>> +		goto error;
>>> +	}
>>> +
>>> +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP);
>>> +	if (rc) {
>>> +		dev_err(ts->dev, "Validation of the response failed\n");
>>> +		goto error;
>>> +	}
>>> +
>>> +	return rc;
>>> +
>>> +error:
>>> +	mutex_lock(&ts->system_lock);
>>> +	ts->hid_cmd_state = HID_CMD_DONE;
>>> +	mutex_unlock(&ts->system_lock);
>>> +
>>> +	return rc;
>>> +}
>>> +
>>> +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
>>> +				      struct cyttsp5_hid_desc *desc)
>>> +{
>>> +	struct device *dev = ts->dev;
>>> +	__le16 hid_desc_register = HID_DESC_REG;
>>> +	int rc;
>>> +	u8 cmd[2];
>>> +
>>> +	/* Read HID descriptor length and version */
>>> +	mutex_lock(&ts->system_lock);
>>> +	ts->hid_cmd_state = HID_CMD_BUSY;
>>> +	mutex_unlock(&ts->system_lock);
>>> +
>>> +	/* Set HID descriptor register */
>>> +	memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
>>> +
>>> +	rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
>>> +	if (rc < 0) {
>>> +		dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
>>> +		goto error;
>>> +	}
>>> +
>>> +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
>>> +				msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
>>> +	if (!rc) {
>>> +		dev_err(ts->dev, "HID get descriptor timed out\n");
>>> +		rc = -ETIME;
>>> +		goto error;
>>> +	}
>>> +
>>> +	memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
>>> +
>>> +	/* Check HID descriptor length and version */
>>> +	if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
>>> +	    le16_to_cpu(desc->bcd_version) != HID_VERSION) {
>>> +		dev_err(dev, "Unsupported HID version\n");
>>> +		return -ENODEV;
>>> +	}
>>> +
>>> +	goto exit;
>>> +
>>> +error:
>>> +	mutex_lock(&ts->system_lock);
>>> +	ts->hid_cmd_state = HID_CMD_DONE;
>>> +	mutex_unlock(&ts->system_lock);
>>> +exit:
>>> +	return rc;
>>> +}
>>> +
>>> +static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size,
>>> +			int offset)
>>> +{
>>> +	tch_abs->ofs = offset / 8;
>>> +	tch_abs->size = report_size / 8;
>>> +	if (report_size % 8)
>>> +		tch_abs->size += 1;
>>> +	tch_abs->min = 0;
>>> +	tch_abs->max = 1 << report_size;
>>> +	tch_abs->bofs = offset - (tch_abs->ofs << 3);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int move_button_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
>>> +{
>>> +	memcpy(si->xy_mode, ts->input_buf, BTN_INPUT_HEADER_SIZE);
>>> +	memcpy(si->xy_data, &ts->input_buf[BTN_INPUT_HEADER_SIZE],
>>> +	       BTN_REPORT_SIZE);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int move_touch_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
>>> +{
>>> +	int max_tch = si->sensing_conf_data.max_tch;
>>> +	int num_cur_tch;
>>> +	int length;
>>> +	struct cyttsp5_tch_abs_params *tch = &si->tch_hdr;
>>> +
>>> +	memcpy(si->xy_mode, ts->input_buf, TOUCH_INPUT_HEADER_SIZE);
>>> +
>>> +	cyttsp5_get_touch_axis(&num_cur_tch, tch->size,
>>> +			       tch->max, si->xy_mode + 3 + tch->ofs, tch->bofs);
>>> +	if (unlikely(num_cur_tch > max_tch))
>>> +		num_cur_tch = max_tch;
>>> +
>>> +	length = num_cur_tch * TOUCH_REPORT_SIZE;
>>> +
>>> +	memcpy(si->xy_data, &ts->input_buf[TOUCH_INPUT_HEADER_SIZE], length);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static irqreturn_t cyttsp5_handle_irq(int irq, void *handle)
>>> +{
>>> +	struct cyttsp5 *ts = handle;
>>> +	int report_id;
>>> +	int size;
>>> +	int rc;
>>> +
>>> +	rc = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT);
>>> +	if (rc)
>>> +		return IRQ_HANDLED;
>>> +
>>> +	size = get_unaligned_le16(&ts->input_buf[0]);
>>> +
>>> +	/* check reset */
>>> +	if (size == 0) {
>>> +		memcpy(ts->response_buf, ts->input_buf, 2);
>>> +
>>> +		mutex_lock(&ts->system_lock);
>>> +		ts->hid_cmd_state = HID_CMD_DONE;
>>> +		mutex_unlock(&ts->system_lock);
>>> +		wake_up(&ts->wait_q);
>>
>> I'd use spinlock in wait queue and wake_up_locked() instead of a
>> separate mutex.
> 
> Hum, okay, I will try that.
> 
>>
>>> +		return IRQ_HANDLED;
>>> +	}
>>> +
>>> +	report_id = ts->input_buf[2];
>>> +
>>
>> 	switch(report_id) {
>> 	}
> 
> Yep, it will be easier to understand.
> 
>>
>>> +	if (report_id == HID_TOUCH_REPORT_ID) {
>>> +		move_touch_data(ts, &ts->sysinfo);
>>> +		cyttsp5_mt_attention(ts->dev);
>>> +	} else if (report_id == HID_BTN_REPORT_ID) {
>>> +		move_button_data(ts, &ts->sysinfo);
>>> +		cyttsp5_btn_attention(ts->dev);
>>> +	} else {
>>> +		/* It is not an input but a command response */
>>> +		memcpy(ts->response_buf, ts->input_buf, size);
>>> +
>>> +		mutex_lock(&ts->system_lock);
>>> +		ts->hid_cmd_state = HID_CMD_DONE;
>>> +		mutex_unlock(&ts->system_lock);
>>> +		wake_up(&ts->wait_q);
>>> +	}
>>> +
>>> +	return IRQ_HANDLED;
>>> +}
>>> +
>>> +static int cyttsp5_deassert_int(struct cyttsp5 *ts)
>>> +{
>>> +	u16 size;
>>> +	u8 buf[2];
>>> +	int rc;
>>> +
>>> +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, 2);
>>> +	if (rc < 0)
>>> +		return rc;
>>> +
>>> +	size = get_unaligned_le16(&buf[0]);
>>> +	if (size == 2 || size == 0)
>>> +		return 0;
>>> +
>>> +	return -EINVAL;
>>> +}
>>> +
>>> +static int cyttsp5_fill_all_touch(struct cyttsp5 *ts)
>>> +{
>>> +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
>>> +
>>> +	fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16,
>>> +		     TOUCH_REPORT_DESC_X);
>>> +	fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16,
>>> +		     TOUCH_REPORT_DESC_Y);
>>> +	fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8,
>>> +		     TOUCH_REPORT_DESC_P);
>>> +	fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5,
>>> +		     TOUCH_REPORT_DESC_CONTACTID);
>>> +	fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5,
>>> +		     TOUCH_REPORT_DESC_HDR_CONTACTCOUNT);
>>> +	fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8,
>>> +		     TOUCH_REPORT_DESC_MAJ);
>>> +	fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8,
>>> +		     TOUCH_REPORT_DESC_MIN);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int cyttsp5_startup(struct cyttsp5 *ts)
>>> +{
>>> +	int rc;
>>> +
>>> +	rc = cyttsp5_deassert_int(ts);
>>> +	if (rc) {
>>> +		dev_err(ts->dev, "Error on deassert int r=%d\n", rc);
>>> +		return -ENODEV;
>>> +	}
>>> +
>>> +	/*
>>> +	 * Launch the application as the device starts in bootloader mode
>>> +	 * because of a power-on-reset
>>> +	 */
>>> +	rc = cyttsp5_hid_output_bl_launch_app(ts);
>>> +	if (rc < 0) {
>>> +		dev_err(ts->dev, "Error on launch app r=%d\n", rc);
>>> +		return rc;
>>> +	}
>>> +
>>> +	rc = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc);
>>> +	if (rc < 0) {
>>> +		dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", rc);
>>> +		return rc;
>>> +	}
>>> +
>>> +	rc = cyttsp5_fill_all_touch(ts);
>>> +	if (rc < 0) {
>>> +		dev_err(ts->dev, "Error on report descriptor r=%d\n", rc);
>>> +		return rc;
>>> +	}
>>> +
>>> +	rc = cyttsp5_hid_output_get_sysinfo(ts);
>>> +	if (rc) {
>>> +		dev_err(ts->dev, "Error on getting sysinfo r=%d\n", rc);
>>> +		return rc;
>>> +	}
>>> +
>>> +	return rc;
>>> +}
>>> +
>>> +#ifdef CONFIG_OF
>>> +static const struct of_device_id cyttsp5_of_match[] = {
>>> +	{ .compatible = "cypress,cyttsp5", },
>>> +	{ }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, cyttsp5_of_match);
>>> +#endif
>>> +
>>> +static const struct i2c_device_id cyttsp5_i2c_id[] = {
>>> +	{ CYTTSP5_NAME, 0, },
>>> +	{ }
>>> +};
>>> +MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id);
>>> +
>>> +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
>>> +			 const char *name)
>>> +{
>>> +	struct cyttsp5 *ts;
>>> +	struct cyttsp5_sysinfo *si;
>>> +	int rc = 0, i;
>>> +
>>> +	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
>>> +	if (!ts)
>>> +		return -ENOMEM;
>>> +
>>> +	/* Initialize device info */
>>> +	ts->regmap = regmap;
>>> +	ts->dev = dev;
>>> +	si = &ts->sysinfo;
>>> +	dev_set_drvdata(dev, ts);
>>> +
>>> +	/* Initialize mutexes and spinlocks */
>>> +	mutex_init(&ts->system_lock);
>>> +
>>> +	/* Initialize wait queue */
>>> +	init_waitqueue_head(&ts->wait_q);
>>> +
>>> +	/* Reset the gpio to be in a reset state */
>>> +	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
>>> +	if (IS_ERR(ts->reset_gpio)) {
>>> +		rc = PTR_ERR(ts->reset_gpio);
>>> +		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
>>> +		return rc;
>>> +	}
>>> +	gpiod_set_value(ts->reset_gpio, 1);
>>
>> Why not request it as GPIOD_OUT_HIGH if you going to activate it
>> immediately? However it sounds as if you have a reset line that is
>> active low and you want to driver it low to reset, and then release. In
>> this case you need to do
>>
>> 	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
>> 	<delay> - chip usually needs to be some time in reset state
>> 	gpiod_set_value(ts->reset_gpio, 0);
>>
>> and make sure that correct polarity is specified in device tree.
> 
> Okay, I will update it too.
> 
>>
>>> +
>>> +	/* Need a delay to have device up */
>>> +	msleep(20);
>>> +
>>> +	rc = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq,
>>> +				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>>
>> Just use IRQF_ONESHOT and make sure DTS specifies interrupt properly.
>> BTW,I'd recommend using level, not edge interrupts. It is so easy to
>> miss an edge.
> 
> Okay, thank you for the advice.
> 
>>
>>> +				       name, ts);
>>> +	if (rc) {
>>> +		dev_err(dev, "unable to request IRQ\n");
>>> +		return rc;
>>> +	}
>>> +
>>> +	rc = cyttsp5_startup(ts);
>>> +	if (rc) {
>>> +		dev_err(ts->dev, "Fail initial startup r=%d\n", rc);
>>> +		return rc;
>>> +	}
>>> +
>>> +	rc = cyttsp5_parse_dt_key_code(dev);
>>> +	if (rc < 0) {
>>> +		dev_err(ts->dev, "Error while parsing dts %d\n", rc);
>>> +		return rc;
>>> +	}
>>> +
>>> +	ts->input = devm_input_allocate_device(dev);
>>> +	if (!ts->input) {
>>> +		dev_err(dev, "Error, failed to allocate input device\n");
>>> +		return -ENODEV;
>>> +	}
>>> +
>>> +	ts->input->name = "cyttsp5";
>>> +	scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
>>> +	ts->input->phys = ts->phys;
>>> +	ts->input->dev.parent = ts->dev;
>>> +	input_set_drvdata(ts->input, ts);
>>> +
>>> +	touchscreen_parse_properties(ts->input, true, NULL);
>>> +
>>> +	__set_bit(EV_KEY, ts->input->evbit);
>>> +	for (i = 0; i < si->num_btns; i++)
>>> +		__set_bit(si->key_code[i], ts->input->keybit);
>>> +
>>> +	return cyttsp5_setup_input_device(dev);
>>> +}
>>> +
>>> +static int cyttsp5_i2c_probe(struct i2c_client *client,
>>> +			     const struct i2c_device_id *id)
>>> +{
>>> +	struct regmap *regmap;
>>> +	static const struct regmap_config config = {
>>> +		.reg_bits = 8,
>>> +		.val_bits = 8,
>>> +	};
>>> +
>>> +	regmap = devm_regmap_init_i2c(client, &config);
>>> +	if (IS_ERR(regmap)) {
>>> +		dev_err(&client->dev, "regmap allocation failed: %ld\n",
>>> +			PTR_ERR(regmap));
>>> +		return PTR_ERR(regmap);
>>> +	}
>>> +
>>> +	return cyttsp5_probe(&client->dev, regmap, client->irq, client->name);
>>> +}
>>> +
>>> +static int cyttsp5_remove(struct device *dev)
>>> +{
>>> +	struct cyttsp5 *ts = dev_get_drvdata(dev);
>>> +
>>> +	input_unregister_device(ts->input);
>>
>> Not needed: you are using managed input device.
> 
> You are right, thanks.
> 
>>
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int cyttsp5_i2c_remove(struct i2c_client *client)
>>> +{
>>> +	struct device *dev = &client->dev;
>>> +
>>> +	return cyttsp5_remove(dev);
>>
>> Not needed if you remove cyttsp5_remove().
> 
> Sure.
> 
>>
>>> +}
>>> +
>>> +static struct i2c_driver cyttsp5_i2c_driver = {
>>> +	.driver = {
>>> +		.name = CYTTSP5_NAME,
>>> +		.owner = THIS_MODULE,
>>> +		.of_match_table = of_match_ptr(cyttsp5_of_match),
>>> +	},
>>> +	.probe = cyttsp5_i2c_probe,
>>> +	.remove = cyttsp5_i2c_remove,
>>> +	.id_table = cyttsp5_i2c_id,
>>> +};
>>> +
>>> +module_i2c_driver(cyttsp5_i2c_driver);
>>> +
>>> +MODULE_LICENSE("GPL");
>>> +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
>>> +MODULE_AUTHOR("Mylène Josserand <mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>");
>>> -- 
>>> 2.11.0
>>>    
>>
>> Thanks.
>>
> 
> Best regards,
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen
  2018-01-23 10:44       ` Mylene Josserand
       [not found]         ` <20180123114459.07cc3404-K8i4uRanGBt8XcdJbWeDu7NAH6kLmebB@public.gmane.org>
@ 2018-01-23 17:30         ` Dmitry Torokhov
  1 sibling, 0 replies; 14+ messages in thread
From: Dmitry Torokhov @ 2018-01-23 17:30 UTC (permalink / raw)
  To: Mylene Josserand
  Cc: robh+dt, mark.rutland, linux-kernel, linux-input, devicetree,
	thomas.petazzoni, maxime.ripard

On Tue, Jan 23, 2018 at 11:44:59AM +0100, Mylene Josserand wrote:
> Hi Dmitry,
> 
> Thank you for the review.
> 
> Le Mon, 22 Jan 2018 20:15:03 -0800,
> Dmitry Torokhov <dmitry.torokhov@gmail.com> a écrit :
> 
> > Hi Mylène,
> > 
> > On Fri, Dec 01, 2017 at 04:39:56PM +0100, Mylène Josserand wrote:
> > > This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
> > > controllers. This driver supports only the I2C bus but it uses regmap
> > > so SPI support could be added later.
> > > The touchscreen can retrieve some defined zone that are handled as
> > > buttons (according to the hardware). That is why it handles
> > > button and multitouch events.
> > > 
> > > Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> > > ---
> > >  drivers/input/touchscreen/Kconfig   |   16 +
> > >  drivers/input/touchscreen/Makefile  |    1 +
> > >  drivers/input/touchscreen/cyttsp5.c | 1110 +++++++++++++++++++++++++++++++++++
> > >  3 files changed, 1127 insertions(+)
> > >  create mode 100644 drivers/input/touchscreen/cyttsp5.c
> > > 
> > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> > > index 0cfdb7cb610e..28eea6d5f1bb 100644
> > > --- a/drivers/input/touchscreen/Kconfig
> > > +++ b/drivers/input/touchscreen/Kconfig
> > > @@ -238,6 +238,22 @@ config TOUCHSCREEN_CYTTSP4_SPI
> > >  	  To compile this driver as a module, choose M here: the
> > >  	  module will be called cyttsp4_spi.
> > >  
> > > +config TOUCHSCREEN_CYTTSP5
> > > +	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
> > > +	depends on OF  
> > 
> > Does it have to be? Please use generic device properties
> > (device_property_* API) and it can be used with ACPI and static board
> > files, of needed.
> 
> Okay, I will try with that.
> 
> > 
> > > +	select REGMAP_I2C
> > > +	select CRC_ITU_T
> > > +	help
> > > +	  Driver for Parade TrueTouch Standard Product
> > > +	  Generation 5 touchscreen controllers.
> > > +	  I2C bus interface support only.
> > > +
> > > +	  Say Y here if you have a Cypress Gen5 touchscreen.
> > > +	  If unsure, say N.
> > > +
> > > +	  To compile this driver as a module, choose M here: the
> > > +	  module will be called cyttsp5.
> > > +
> > >  config TOUCHSCREEN_DA9034
> > >  	tristate "Touchscreen support for Dialog Semiconductor DA9034"
> > >  	depends on PMIC_DA903X
> > > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> > > index d2a2b3b7af27..e7d124901dd9 100644
> > > --- a/drivers/input/touchscreen/Makefile
> > > +++ b/drivers/input/touchscreen/Makefile
> > > @@ -26,6 +26,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
> > >  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
> > >  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
> > >  obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
> > > +obj-$(CONFIG_TOUCHSCREEN_CYTTSP5)	+= cyttsp5.o
> > >  obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
> > >  obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
> > >  obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
> > > diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
> > > new file mode 100644
> > > index 000000000000..a41feea2cd5a
> > > --- /dev/null
> > > +++ b/drivers/input/touchscreen/cyttsp5.c
> > > @@ -0,0 +1,1110 @@
> > > +/*
> > > + * Parade TrueTouch(TM) Standard Product V5 Module.
> > > + * For use with Parade touchscreen controllers.
> > > + *
> > > + * Copyright (C) 2015 Parade Technologies
> > > + * Copyright (C) 2012-2015 Cypress Semiconductor
> > > + * Copyright (C) 2017 Free Electrons
> > > + *
> > > + * Author: Mylène Josserand <mylene.josserand@free-electrons.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License
> > > + * version 2, and only version 2, as published by the
> > > + * Free Software Foundation.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + */
> > > +
> > > +#include <asm/unaligned.h>
> > > +#include <linux/crc-itu-t.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/device.h>
> > > +#include <linux/gpio.h>
> > > +#include <linux/input/mt.h>
> > > +#include <linux/input/touchscreen.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/i2c.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#define CYTTSP5_NAME				"cyttsp5"
> > > +#define CY_I2C_DATA_SIZE			(2 * 256)
> > > +#define HID_VERSION				0x0100
> > > +#define CY_MAX_INPUT				512
> > > +#define CYTTSP5_PREALLOCATED_CMD_BUFFER	32
> > > +#define CY_BITS_PER_BTN			1
> > > +#define CY_NUM_BTN_EVENT_ID			((1 << CY_BITS_PER_BTN) - 1)
> > > +
> > > +#define MAX_AREA				255
> > > +#define HID_OUTPUT_BL_SOP			0x1
> > > +#define HID_OUTPUT_BL_EOP			0x17
> > > +#define HID_OUTPUT_BL_LAUNCH_APP		0x3B
> > > +#define HID_OUTPUT_BL_LAUNCH_APP_SIZE		11
> > > +#define HID_OUTPUT_GET_SYSINFO			0x2
> > > +#define HID_OUTPUT_GET_SYSINFO_SIZE		5
> > > +
> > > +#define HID_DESC_REG				0x1
> > > +#define HID_INPUT_REG				0x3
> > > +#define HID_OUTPUT_REG				0x4
> > > +
> > > +#define REPORT_ID_TOUCH			0x1
> > > +#define REPORT_ID_BTN				0x3
> > > +#define REPORT_SIZE_5				5
> > > +#define REPORT_SIZE_8				8
> > > +#define REPORT_SIZE_16				16
> > > +
> > > +/* Touch reports offsets */
> > > +/* Header offsets */
> > > +#define TOUCH_REPORT_DESC_HDR_CONTACTCOUNT	16
> > > +/* Record offsets */
> > > +#define TOUCH_REPORT_DESC_CONTACTID		8
> > > +#define TOUCH_REPORT_DESC_X			16
> > > +#define TOUCH_REPORT_DESC_Y			32
> > > +#define TOUCH_REPORT_DESC_P			48
> > > +#define TOUCH_REPORT_DESC_MAJ			56
> > > +#define TOUCH_REPORT_DESC_MIN			64
> > > +
> > > +/* HID */
> > > +#define HID_TOUCH_REPORT_ID			0x1
> > > +#define HID_BTN_REPORT_ID			0x3
> > > +#define HID_APP_RESPONSE_REPORT_ID		0x1F
> > > +#define HID_APP_OUTPUT_REPORT_ID		0x2F
> > > +#define HID_BL_RESPONSE_REPORT_ID		0x30
> > > +#define HID_BL_OUTPUT_REPORT_ID		0x40
> > > +
> > > +#define HID_OUTPUT_RESPONSE_REPORT_OFFSET	2
> > > +#define HID_OUTPUT_RESPONSE_CMD_OFFSET		4
> > > +#define HID_OUTPUT_RESPONSE_CMD_MASK		0x7F
> > > +
> > > +#define HID_SYSINFO_SENSING_OFFSET		33
> > > +#define HID_SYSINFO_BTN_OFFSET			48
> > > +#define HID_SYSINFO_BTN_MASK			0xFF
> > > +#define HID_SYSINFO_MAX_BTN			8
> > > +
> > > +/*  Timeout in ms */
> > > +#define CY_HID_OUTPUT_TIMEOUT			200
> > > +#define CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT	3000
> > > +#define CY_HID_GET_HID_DESCRIPTOR_TIMEOUT	4000
> > > +
> > > +/* maximum number of concurrent tracks */
> > > +#define TOUCH_REPORT_SIZE			10
> > > +#define TOUCH_INPUT_HEADER_SIZE		7
> > > +#define BTN_REPORT_SIZE			9
> > > +#define BTN_INPUT_HEADER_SIZE			5
> > > +
> > > +/* All usage pages for Touch Report */
> > > +#define TOUCH_REPORT_USAGE_PG_X		0x00010030
> > > +#define TOUCH_REPORT_USAGE_PG_Y		0x00010031
> > > +#define TOUCH_REPORT_USAGE_PG_P		0x000D0030
> > > +#define TOUCH_REPORT_USAGE_PG_CONTACTID	0x000D0051
> > > +#define TOUCH_REPORT_USAGE_PG_CONTACTCOUNT	0x000D0054
> > > +#define TOUCH_REPORT_USAGE_PG_MAJ		0xFF010062
> > > +#define TOUCH_REPORT_USAGE_PG_MIN		0xFF010063
> > > +#define TOUCH_COL_USAGE_PG			0x000D0022
> > > +
> > > +/* helpers */
> > > +#define HI_BYTE(x)				(u8)(((x) >> 8) & 0xFF)
> > > +#define LOW_BYTE(x)				(u8)((x) & 0xFF)
> > > +
> > > +/* System Information interface definitions */
> > > +struct cyttsp5_sensing_conf_data_dev {
> > > +	u8 electrodes_x;
> > > +	u8 electrodes_y;
> > > +	__le16 len_x;
> > > +	__le16 len_y;
> > > +	__le16 res_x;
> > > +	__le16 res_y;
> > > +	__le16 max_z;
> > > +	u8 origin_x;
> > > +	u8 origin_y;
> > > +	u8 btn;
> > > +	u8 scan_mode;
> > > +	u8 max_num_of_tch_per_refresh_cycle;
> > > +} __packed;
> > > +
> > > +struct cyttsp5_sensing_conf_data {
> > > +	u16 res_x;
> > > +	u16 res_y;
> > > +	u16 max_z;
> > > +	u16 len_x;
> > > +	u16 len_y;
> > > +	u8 origin_x;
> > > +	u8 origin_y;
> > > +	u8 max_tch;
> > > +};
> > > +
> > > +enum { HID_CMD_DONE, HID_CMD_BUSY } hid_cmd_state;
> > > +
> > > +enum cyttsp5_tch_abs {	/* for ordering within the extracted touch data array */
> > > +	CY_TCH_X,	/* X */
> > > +	CY_TCH_Y,	/* Y */
> > > +	CY_TCH_P,	/* P (Z) */
> > > +	CY_TCH_T,	/* TOUCH ID */
> > > +	CY_TCH_MAJ,	/* TOUCH_MAJOR */
> > > +	CY_TCH_MIN,	/* TOUCH_MINOR */
> > > +	CY_TCH_NUM_ABS,
> > > +};
> > > +
> > > +struct cyttsp5_tch_abs_params {
> > > +	size_t ofs;	/* abs byte offset */
> > > +	size_t size;	/* size in bits */
> > > +	size_t min;	/* min value */
> > > +	size_t max;	/* max value */
> > > +	size_t bofs;	/* bit offset */
> > > +};
> > > +
> > > +struct cyttsp5_touch {
> > > +	int hdr;
> > > +	int abs[CY_TCH_NUM_ABS];
> > > +};
> > > +
> > > +struct cyttsp5_sysinfo {
> > > +	struct cyttsp5_sensing_conf_data sensing_conf_data;
> > > +	int num_btns;
> > > +	struct cyttsp5_tch_abs_params tch_hdr;
> > > +	struct cyttsp5_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
> > > +	u32 key_code[HID_SYSINFO_MAX_BTN];
> > > +	u8 *xy_mode;
> > > +	u8 *xy_data;
> > > +};
> > > +
> > > +struct cyttsp5_hid_desc {
> > > +	__le16 hid_desc_len;
> > > +	u8 packet_id;
> > > +	u8 reserved_byte;
> > > +	__le16 bcd_version;
> > > +	__le16 report_desc_len;
> > > +	__le16 report_desc_register;
> > > +	__le16 input_register;
> > > +	__le16 max_input_len;
> > > +	__le16 output_register;
> > > +	__le16 max_output_len;
> > > +	__le16 command_register;
> > > +	__le16 data_register;
> > > +	__le16 vendor_id;
> > > +	__le16 product_id;
> > > +	__le16 version_id;
> > > +	u8 reserved[4];
> > > +} __packed;
> > > +
> > > +struct cyttsp5 {
> > > +	struct device *dev;
> > > +	struct mutex system_lock;
> > > +	wait_queue_head_t wait_q;
> > > +	struct cyttsp5_sysinfo sysinfo;
> > > +	int hid_cmd_state;
> > > +	struct cyttsp5_hid_desc hid_desc;
> > > +	u8 cmd_buf[CYTTSP5_PREALLOCATED_CMD_BUFFER];
> > > +	u8 input_buf[CY_MAX_INPUT];
> > > +	u8 response_buf[CY_MAX_INPUT];
> > > +	struct gpio_desc *reset_gpio;
> > > +	struct input_dev *input;
> > > +	char phys[NAME_MAX];
> > > +	int num_prv_rec;
> > > +	struct regmap *regmap;
> > > +};
> > > +
> > > +/*
> > > + * For what understood in the datasheet, the register does not
> > > + * matter. For consistency, used the Input Register address
> > > + * but it does mean anything to the device. The important data
> > > + * to send is the I2C address
> > > + */
> > > +static int cyttsp5_read(struct cyttsp5 *ts, u8 *buf, u32 max)
> > > +{
> > > +	int rc;
> > > +	u32 size;
> > > +	u8 temp[2];
> > > +
> > > +	if (!buf)
> > > +		return -EINVAL;  
> > 
> > Is it really possible? This is not a publicly facing API but private
> > driver data, do you ever happen to call it with NULL?
> 
> hm, I do not think so but I will check that.
> 
> > 
> > > +
> > > +	/* Read the frame to retrieve the size */
> > > +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, temp, 2);
> > > +	if (rc < 0)
> > > +		return rc;  
> > 
> > Can we call this kind of variables "error" pelase?
> 
> Sure.
> 
> > 
> > > +
> > > +	size = get_unaligned_le16(temp);
> > > +	if (!size || size == 2)
> > > +		return 0;
> > > +
> > > +	if (size > max)
> > > +		return -EINVAL;
> > > +
> > > +	/* Get the real value */
> > > +	return regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, size);
> > > +}
> > > +
> > > +static int cyttsp5_write(struct cyttsp5 *ts, unsigned int reg, u8 *data,
> > > +			 size_t size)
> > > +{
> > > +	u8 cmd[size + 1];
> > > +
> > > +	/* High bytes of register address needed as first byte of cmd */
> > > +	cmd[0] = HI_BYTE(reg);
> > > +
> > > +	/* Copy the rest of the data */
> > > +	if (data)
> > > +		memcpy(&cmd[1], data, size);
> > > +
> > > +	/* The hardware wants to receive a frame with the address register  
> > 
> > The multiline comment block should start with "/*" on a separate line
> > please.
> 
> I will change that.
> 
> > 
> > > +	 * contains in the first two bytes. As the regmap_write function
> > > +	 * add the register adresse in the frame, we use the LOW_BYTE as
> > > +	 * first frame byte for the address register and the first
> > > +	 * data byte is the high register + left of the cmd to send
> > > +	 */
> > > +	return regmap_bulk_write(ts->regmap, LOW_BYTE(reg), cmd, size + 1);
> > > +}
> > > +
> > > +static void cyttsp5_final_sync(struct input_dev *input, int max_slots,
> > > +			       unsigned long *ids)
> > > +{
> > > +	int t;
> > > +
> > > +	for (t = 0; t < max_slots; t++) {  
> > 
> > 	for_each_set_bit() {
> > 	}
> 
> I did not know this macro, I will try that.
> 
> > 
> > > +		if (test_bit(t, ids))
> > > +			continue;
> > > +		input_mt_slot(input, t);
> > > +		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
> > > +	}
> > > +
> > > +	input_sync(input);
> > > +}
> > > +
> > > +static void cyttsp5_report_slot_liftoff(struct cyttsp5 *ts, int max_slots)
> > > +{
> > > +	int t;
> > > +
> > > +	if (ts->num_prv_rec == 0)
> > > +		return;  
> > 
> > Do you need this check? The caller checks the same condition.
> 
> True, I will remove it.
> 
> > 
> > > +
> > > +	for (t = 0; t < max_slots; t++) {
> > > +		input_mt_slot(ts->input, t);
> > > +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
> > > +	}
> > > +}
> > > +
> > > +static void cyttsp5_mt_lift_all(struct cyttsp5 *ts)
> > > +{
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int max = si->tch_abs[CY_TCH_T].max;
> > > +
> > > +	if (ts->num_prv_rec != 0) {
> > > +		cyttsp5_report_slot_liftoff(ts, max);
> > > +		input_sync(ts->input);
> > > +		ts->num_prv_rec = 0;
> > > +	}
> > > +}
> > > +
> > > +static void cyttsp5_get_touch_axis(int *axis, int size, int max, u8 *xy_data,
> > > +				   int bofs)
> > > +{
> > > +	int nbyte;
> > > +	int next;
> > > +
> > > +	for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++)
> > > +		*axis = *axis + ((xy_data[nbyte] >> bofs) << (nbyte * 8));
> > > +
> > > +	*axis &= max - 1;
> > > +}
> > > +
> > > +static void cyttsp5_get_touch_record(struct cyttsp5 *ts,
> > > +				     struct cyttsp5_touch *touch, u8 *xy_data)
> > > +{
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	enum cyttsp5_tch_abs abs;
> > > +
> > > +	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
> > > +		cyttsp5_get_touch_axis(&touch->abs[abs],
> > > +				       si->tch_abs[abs].size,
> > > +				       si->tch_abs[abs].max,
> > > +				       xy_data + si->tch_abs[abs].ofs,
> > > +				       si->tch_abs[abs].bofs);
> > > +	}
> > > +}
> > > +
> > > +static void cyttsp5_get_mt_touches(struct cyttsp5 *ts,
> > > +				   struct cyttsp5_touch *tch, int num_cur_tch)
> > > +{
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int i, t = 0;
> > > +	DECLARE_BITMAP(ids, si->tch_abs[CY_TCH_T].max);
> > > +	u8 *tch_addr;
> > > +	int tmp;
> > > +
> > > +	bitmap_zero(ids, si->tch_abs[CY_TCH_T].max);
> > > +	memset(tch->abs, 0, sizeof(tch->abs));
> > > +
> > > +	for (i = 0; i < num_cur_tch; i++) {
> > > +		tch_addr = si->xy_data + (i * TOUCH_REPORT_SIZE);
> > > +		cyttsp5_get_touch_record(ts, tch, tch_addr);
> > > +
> > > +		/* Convert MAJOR/MINOR from mm to resolution */
> > > +		tmp = tch->abs[CY_TCH_MAJ] * 100 * si->sensing_conf_data.res_x;
> > > +		tch->abs[CY_TCH_MAJ] = tmp / si->sensing_conf_data.len_x;
> > > +		tmp = tch->abs[CY_TCH_MIN] * 100 * si->sensing_conf_data.res_x;
> > > +		tch->abs[CY_TCH_MIN] = tmp / si->sensing_conf_data.len_x;
> > > +
> > > +		t = tch->abs[CY_TCH_T];
> > > +		input_mt_slot(ts->input, t);
> > > +		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
> > > +		__set_bit(t, ids);
> > > +
> > > +		/* position and pressure fields */
> > > +		input_report_abs(ts->input, ABS_MT_POSITION_X,
> > > +				 tch->abs[CY_TCH_X]);
> > > +		input_report_abs(ts->input, ABS_MT_POSITION_Y,
> > > +				 tch->abs[CY_TCH_Y]);
> > > +		input_report_abs(ts->input, ABS_MT_PRESSURE,
> > > +				 tch->abs[CY_TCH_P]);
> > > +
> > > +		/* Get the extended touch fields */
> > > +		input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
> > > +				 tch->abs[CY_TCH_MAJ]);
> > > +		input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
> > > +				 tch->abs[CY_TCH_MIN]);
> > > +	}
> > > +
> > > +	cyttsp5_final_sync(ts->input, si->tch_abs[CY_TCH_T].max, ids);
> > > +
> > > +	ts->num_prv_rec = num_cur_tch;
> > > +}
> > > +
> > > +/* read xy_data for all current touches */
> > > +static int cyttsp5_xy_worker(struct cyttsp5 *ts)
> > > +{
> > > +	struct device *dev = ts->dev;
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int max_tch = si->sensing_conf_data.max_tch;
> > > +	struct cyttsp5_touch tch;
> > > +	u8 num_cur_tch;
> > > +
> > > +	cyttsp5_get_touch_axis(&tch.hdr, si->tch_hdr.size,
> > > +			       si->tch_hdr.max,
> > > +			       si->xy_mode + 3 + si->tch_hdr.ofs,
> > > +			       si->tch_hdr.bofs);
> > > +
> > > +	num_cur_tch = tch.hdr;
> > > +	if (num_cur_tch > max_tch) {
> > > +		dev_err(dev, "Num touch err detected (n=%d)\n", num_cur_tch);
> > > +		num_cur_tch = max_tch;
> > > +	}
> > > +
> > > +	if (num_cur_tch == 0 && ts->num_prv_rec == 0)
> > > +		return 0;
> > > +
> > > +	/* extract xy_data for all currently reported touches */
> > > +	if (num_cur_tch)
> > > +		cyttsp5_get_mt_touches(ts, &tch, num_cur_tch);
> > > +	else
> > > +		cyttsp5_mt_lift_all(ts);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int cyttsp5_mt_attention(struct device *dev)
> > > +{
> > > +	struct cyttsp5 *ts = dev_get_drvdata(dev);  
> > 
> > Why don't you pass ts into cyttsp5_mt_attention?
> 
> Yep, you are right, I will update it.
> 
> > 
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int rc;
> > > +
> > > +	if (si->xy_mode[2] != HID_TOUCH_REPORT_ID)
> > > +		return 0;
> > > +
> > > +	/* core handles handshake */
> > > +	rc = cyttsp5_xy_worker(ts);
> > > +	if (rc < 0)
> > > +		dev_err(dev, "xy_worker error r=%d\n", rc);
> > > +
> > > +	return rc;
> > > +}
> > > +
> > > +static int cyttsp5_setup_input_device(struct device *dev)
> > > +{
> > > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int max_x, max_y, max_p;
> > > +	int max_x_tmp, max_y_tmp;
> > > +	int rc;
> > > +
> > > +	__set_bit(EV_ABS, ts->input->evbit);
> > > +	__set_bit(EV_REL, ts->input->evbit);
> > > +	__set_bit(EV_KEY, ts->input->evbit);
> > > +
> > > +	max_x_tmp = si->sensing_conf_data.res_x;
> > > +	max_y_tmp = si->sensing_conf_data.res_y;
> > > +	max_x = max_y_tmp - 1;
> > > +	max_y = max_x_tmp - 1;
> > > +	max_p = si->sensing_conf_data.max_z;
> > > +
> > > +	input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max, 0);  
> > 
> > Error handling.
> 
> Thanks.
> 
> > 
> > > +
> > > +	__set_bit(ABS_MT_POSITION_X, ts->input->absbit);
> > > +	__set_bit(ABS_MT_POSITION_Y, ts->input->absbit);
> > > +	__set_bit(ABS_MT_PRESSURE, ts->input->absbit);
> > > +
> > > +	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
> > > +	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
> > > +	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
> > > +
> > > +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
> > > +	input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);  
> > 
> > You might want to use the standard DT touchscreen properties and
> > reporting functions to support axis inversion and swapping of axes.
> 
> Hm, I am not sure to see what you are referring to.
> Could you explain me what you think of?

Please take a look at include/linux/input/touchscreen.h and in the other
driver you are hacking on there is example of how to use this API.

Basically you need to call touchscreen_parse_properties() somewhere in
probe path, and then use touchscreen_report_pos() to report contact
coordinates within given slot.

> 
> > 
> > > +
> > > +	rc = input_register_device(ts->input);
> > > +	if (rc < 0)
> > > +		dev_err(dev, "Error, failed register input device r=%d\n", rc);
> > > +
> > > +	return rc;
> > > +}
> > > +
> > > +#ifdef CONFIG_OF
> > > +static int cyttsp5_parse_dt_key_code(struct device *dev)
> > > +{
> > > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	struct device_node *np;
> > > +	int i;
> > > +
> > > +	np = dev->of_node;
> > > +	if (!np)
> > > +		return -EINVAL;
> > > +
> > > +	if (!si->num_btns)
> > > +		return 0;
> > > +
> > > +	/* Initialize the button to RESERVED */
> > > +	for (i = 0; i < si->num_btns; i++)
> > > +		si->key_code[i] = KEY_RESERVED;
> > > +
> > > +	return of_property_read_u32_array(np, "linux,keycodes",
> > > +				   si->key_code, si->num_btns);
> > > +}
> > > +#else
> > > +static int cyttsp5_parse_dt_key_code(struct device *dev)
> > > +{
> > > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int i;
> > > +
> > > +	if (!si->num_btns)
> > > +		return 0;
> > > +
> > > +	/* Initialize the button to RESERVED */
> > > +	for (i = 0; i < si->num_btns; i++)
> > > +		si->key_code[i] = KEY_RESERVED;
> > > +
> > > +	return 0;
> > > +}
> > > +#endif
> > > +
> > > +static int cyttsp5_btn_attention(struct device *dev)
> > > +{
> > > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int cur_btn;
> > > +	int cur_btn_state;
> > > +
> > > +	if (si->xy_mode[2] != HID_BTN_REPORT_ID || !si->num_btns)
> > > +		return 0;
> > > +
> > > +	/* extract button press/release touch information */
> > > +	for (cur_btn = 0; cur_btn < si->num_btns; cur_btn++) {
> > > +		/* Get current button state */
> > > +		cur_btn_state = (si->xy_data[0] >> (cur_btn * CY_BITS_PER_BTN))
> > > +			& CY_NUM_BTN_EVENT_ID;
> > > +
> > > +		input_report_key(ts->input, si->key_code[cur_btn],
> > > +				 cur_btn_state);
> > > +		input_sync(ts->input);  
> > 
> > You do not need to sen sync after each button, send it once after all
> > buttons sent.
> 
> Oh, yes, I will do that!
> 
> > 
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static u16 cyttsp5_compute_crc(u8 *buf, u32 size)
> > > +{
> > > +	u16 remainder = 0xFFFF;
> > > +	u16 xor_mask = 0x0000;
> > > +	u32 index;
> > > +	u32 byte_value;
> > > +	u32 table_index;
> > > +	u32 crc_bit_width = sizeof(u16) * 8;
> > > +
> > > +	/* Divide the message by polynomial, via the table. */
> > > +	for (index = 0; index < size; index++) {
> > > +		byte_value = buf[index];
> > > +		table_index = ((byte_value >> 4) & 0x0F)
> > > +			^ (remainder >> (crc_bit_width - 4));
> > > +		remainder = crc_itu_t_table[table_index]
> > > +			^ (remainder << 4);
> > > +		table_index = (byte_value & 0x0F)
> > > +			^ (remainder >> (crc_bit_width - 4));
> > > +		remainder = crc_itu_t_table[table_index]
> > > +			^ (remainder << 4);
> > > +	}
> > > +
> > > +	/* Perform the final remainder CRC. */
> > > +	return remainder ^ xor_mask;
> > > +}
> > > +
> > > +static int cyttsp5_validate_cmd_response(struct cyttsp5 *ts, u8 code)
> > > +{
> > > +	u16 size, crc;
> > > +	u8 status, offset;
> > > +	int command_code;
> > > +
> > > +	size = get_unaligned_le16(&ts->response_buf[0]);
> > > +
> > > +	if (!size)
> > > +		return 0;
> > > +
> > > +	offset = ts->response_buf[HID_OUTPUT_RESPONSE_REPORT_OFFSET];
> > > +
> > > +	if (offset == HID_BL_RESPONSE_REPORT_ID) {
> > > +		if (ts->response_buf[4] != HID_OUTPUT_BL_SOP) {
> > > +			dev_err(ts->dev, "HID output response, wrong SOP\n");
> > > +			return -EPROTO;
> > > +		}
> > > +
> > > +		if (ts->response_buf[size - 1] != HID_OUTPUT_BL_EOP) {
> > > +			dev_err(ts->dev, "HID output response, wrong EOP\n");
> > > +			return -EPROTO;
> > > +		}
> > > +
> > > +		crc = cyttsp5_compute_crc(&ts->response_buf[4], size - 7);
> > > +		if (ts->response_buf[size - 3] != LOW_BYTE(crc) ||
> > > +		    ts->response_buf[size - 2] != HI_BYTE(crc)) {
> > > +			dev_err(ts->dev, "HID output response, wrong CRC 0x%X\n",
> > > +				crc);
> > > +			return -EPROTO;
> > > +		}
> > > +
> > > +		status = ts->response_buf[5];
> > > +		if (status) {
> > > +			dev_err(ts->dev, "HID output response, ERROR:%d\n",
> > > +				status);
> > > +			return -EPROTO;
> > > +		}
> > > +	}
> > > +
> > > +	if (offset == HID_APP_RESPONSE_REPORT_ID) {
> > > +		command_code = ts->response_buf[HID_OUTPUT_RESPONSE_CMD_OFFSET]
> > > +			& HID_OUTPUT_RESPONSE_CMD_MASK;
> > > +		if (command_code != code) {
> > > +			dev_err(ts->dev,
> > > +				"HID output response, wrong command_code:%X\n",
> > > +				command_code);
> > > +			return -EPROTO;
> > > +		}
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static void cyttsp5_si_get_btn_data(struct cyttsp5 *ts)
> > > +{
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +	int i;
> > > +	unsigned int btns = ts->response_buf[HID_SYSINFO_BTN_OFFSET]
> > > +		& HID_SYSINFO_BTN_MASK;
> > > +
> > > +	si->num_btns = 0;
> > > +	for (i = 0; i < HID_SYSINFO_MAX_BTN; i++) {
> > > +		if (btns & BIT(i))
> > > +			si->num_btns++;
> > > +	}  
> > 
> > 	si->num_btns = hweight8(ts->response_buf[HID_SYSINFO_BTN_OFFSET]);
> 
> Great, I will try that!
> 
> > 
> > > +}
> > > +
> > > +static int cyttsp5_get_sysinfo_regs(struct cyttsp5 *ts)
> > > +{
> > > +	struct cyttsp5_sensing_conf_data *scd = &ts->sysinfo.sensing_conf_data;
> > > +	struct cyttsp5_sensing_conf_data_dev *scd_dev =
> > > +		(struct cyttsp5_sensing_conf_data_dev *)
> > > +		&ts->response_buf[HID_SYSINFO_SENSING_OFFSET];
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +
> > > +	cyttsp5_si_get_btn_data(ts);
> > > +
> > > +	scd->max_tch = scd_dev->max_num_of_tch_per_refresh_cycle;
> > > +	scd->res_x = get_unaligned_le16(&scd_dev->res_x);
> > > +	scd->res_y = get_unaligned_le16(&scd_dev->res_y);
> > > +	scd->max_z = get_unaligned_le16(&scd_dev->max_z);
> > > +	scd->len_x = get_unaligned_le16(&scd_dev->len_x);
> > > +	scd->len_y = get_unaligned_le16(&scd_dev->len_y);
> > > +
> > > +	si->xy_data = devm_kzalloc(ts->dev, scd->max_tch * TOUCH_REPORT_SIZE,
> > > +				   GFP_KERNEL);
> > > +	if (!si->xy_data)
> > > +		return -ENOMEM;
> > > +
> > > +	si->xy_mode = devm_kzalloc(ts->dev, TOUCH_INPUT_HEADER_SIZE,
> > > +				   GFP_KERNEL);
> > > +	if (!si->xy_mode)
> > > +		return -ENOMEM;  
> > 
> > Why do we need these 2 allocated separately form the driver data?
> 
> xy_mode and particularly xy_data are used to retrieve buttons or touch
> data that we received from the input buffer (see gggggggggggggggg()
> and move_touch_data()). I guess that I can try to remove them, if you
> want.

You probably do not need them, you already have all data in input_buf,
just the right offset to cyttsp5_btn_attention() , like

		...
		cyttsp5_btn_attention(ts, ts->input_buf + BTN_INPUT_HEADER_SIZE);
		...

> 
> > 
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int cyttsp5_hid_output_get_sysinfo(struct cyttsp5 *ts)
> > > +{
> > > +	int rc;
> > > +	u8 cmd[HID_OUTPUT_GET_SYSINFO_SIZE];
> > > +
> > > +	ts->hid_cmd_state = HID_CMD_BUSY;
> > > +
> > > +	/* HI bytes of Output register address */
> > > +	cmd[0] = LOW_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
> > > +	cmd[1] = HI_BYTE(HID_OUTPUT_GET_SYSINFO_SIZE);
> > > +	cmd[2] = HID_APP_OUTPUT_REPORT_ID;
> > > +	cmd[3] = 0x0; /* Reserved */
> > > +	cmd[4] = HID_OUTPUT_GET_SYSINFO;
> > > +
> > > +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
> > > +			   HID_OUTPUT_GET_SYSINFO_SIZE);
> > > +	if (rc) {
> > > +		dev_err(ts->dev, "Failed to write command %d", rc);
> > > +		goto error;
> > > +	}
> > > +
> > > +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > > +				msecs_to_jiffies(CY_HID_OUTPUT_GET_SYSINFO_TIMEOUT));
> > > +	if (!rc) {
> > > +		dev_err(ts->dev, "HID output cmd execution timed out\n");
> > > +		rc = -ETIME;
> > > +		goto error;
> > > +	}
> > > +
> > > +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_GET_SYSINFO);
> > > +	if (rc) {
> > > +		dev_err(ts->dev, "Validation of the response failed\n");
> > > +		goto error;
> > > +	}
> > > +
> > > +	return cyttsp5_get_sysinfo_regs(ts);
> > > +
> > > +error:
> > > +	mutex_lock(&ts->system_lock);
> > > +	ts->hid_cmd_state = HID_CMD_DONE;
> > > +	mutex_unlock(&ts->system_lock);
> > > +	return rc;
> > > +}
> > > +
> > > +static int cyttsp5_hid_output_bl_launch_app(struct cyttsp5 *ts)
> > > +{
> > > +	int rc;
> > > +	u8 cmd[HID_OUTPUT_BL_LAUNCH_APP];
> > > +	u16 crc;
> > > +
> > > +	mutex_lock(&ts->system_lock);
> > > +	ts->hid_cmd_state = HID_CMD_BUSY;
> > > +	mutex_unlock(&ts->system_lock);
> > > +
> > > +	cmd[0] = LOW_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> > > +	cmd[1] = HI_BYTE(HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> > > +	cmd[2] = HID_BL_OUTPUT_REPORT_ID;
> > > +	cmd[3] = 0x0; /* Reserved */
> > > +	cmd[4] = HID_OUTPUT_BL_SOP;
> > > +	cmd[5] = HID_OUTPUT_BL_LAUNCH_APP;
> > > +	cmd[6] = 0x0; /* Low bytes of data */
> > > +	cmd[7] = 0x0; /* Hi bytes of data */
> > > +	crc = cyttsp5_compute_crc(&cmd[4], 4);
> > > +	cmd[8] = LOW_BYTE(crc);
> > > +	cmd[9] = HI_BYTE(crc);
> > > +	cmd[10] = HID_OUTPUT_BL_EOP;
> > > +
> > > +	rc = cyttsp5_write(ts, HID_OUTPUT_REG, cmd,
> > > +			   HID_OUTPUT_BL_LAUNCH_APP_SIZE);
> > > +	if (rc) {
> > > +		dev_err(ts->dev, "Failed to write command %d", rc);
> > > +		goto error;
> > > +	}
> > > +
> > > +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > > +				msecs_to_jiffies(CY_HID_OUTPUT_TIMEOUT));
> > > +	if (!rc) {
> > > +		dev_err(ts->dev, "HID output cmd execution timed out\n");
> > > +		rc = -ETIME;
> > > +		goto error;
> > > +	}
> > > +
> > > +	rc = cyttsp5_validate_cmd_response(ts, HID_OUTPUT_BL_LAUNCH_APP);
> > > +	if (rc) {
> > > +		dev_err(ts->dev, "Validation of the response failed\n");
> > > +		goto error;
> > > +	}
> > > +
> > > +	return rc;
> > > +
> > > +error:
> > > +	mutex_lock(&ts->system_lock);
> > > +	ts->hid_cmd_state = HID_CMD_DONE;
> > > +	mutex_unlock(&ts->system_lock);
> > > +
> > > +	return rc;
> > > +}
> > > +
> > > +static int cyttsp5_get_hid_descriptor(struct cyttsp5 *ts,
> > > +				      struct cyttsp5_hid_desc *desc)
> > > +{
> > > +	struct device *dev = ts->dev;
> > > +	__le16 hid_desc_register = HID_DESC_REG;
> > > +	int rc;
> > > +	u8 cmd[2];
> > > +
> > > +	/* Read HID descriptor length and version */
> > > +	mutex_lock(&ts->system_lock);
> > > +	ts->hid_cmd_state = HID_CMD_BUSY;
> > > +	mutex_unlock(&ts->system_lock);
> > > +
> > > +	/* Set HID descriptor register */
> > > +	memcpy(cmd, &hid_desc_register, sizeof(hid_desc_register));
> > > +
> > > +	rc = cyttsp5_write(ts, HID_DESC_REG, NULL, 0);
> > > +	if (rc < 0) {
> > > +		dev_err(dev, "Failed to get HID descriptor, rc=%d\n", rc);
> > > +		goto error;
> > > +	}
> > > +
> > > +	rc = wait_event_timeout(ts->wait_q, (ts->hid_cmd_state == HID_CMD_DONE),
> > > +				msecs_to_jiffies(CY_HID_GET_HID_DESCRIPTOR_TIMEOUT));
> > > +	if (!rc) {
> > > +		dev_err(ts->dev, "HID get descriptor timed out\n");
> > > +		rc = -ETIME;
> > > +		goto error;
> > > +	}
> > > +
> > > +	memcpy(desc, ts->response_buf, sizeof(struct cyttsp5_hid_desc));
> > > +
> > > +	/* Check HID descriptor length and version */
> > > +	if (le16_to_cpu(desc->hid_desc_len) != sizeof(*desc) ||
> > > +	    le16_to_cpu(desc->bcd_version) != HID_VERSION) {
> > > +		dev_err(dev, "Unsupported HID version\n");
> > > +		return -ENODEV;
> > > +	}
> > > +
> > > +	goto exit;
> > > +
> > > +error:
> > > +	mutex_lock(&ts->system_lock);
> > > +	ts->hid_cmd_state = HID_CMD_DONE;
> > > +	mutex_unlock(&ts->system_lock);
> > > +exit:
> > > +	return rc;
> > > +}
> > > +
> > > +static int fill_tch_abs(struct cyttsp5_tch_abs_params *tch_abs, int report_size,
> > > +			int offset)
> > > +{
> > > +	tch_abs->ofs = offset / 8;
> > > +	tch_abs->size = report_size / 8;
> > > +	if (report_size % 8)
> > > +		tch_abs->size += 1;
> > > +	tch_abs->min = 0;
> > > +	tch_abs->max = 1 << report_size;
> > > +	tch_abs->bofs = offset - (tch_abs->ofs << 3);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int move_button_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
> > > +{
> > > +	memcpy(si->xy_mode, ts->input_buf, BTN_INPUT_HEADER_SIZE);
> > > +	memcpy(si->xy_data, &ts->input_buf[BTN_INPUT_HEADER_SIZE],
> > > +	       BTN_REPORT_SIZE);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int move_touch_data(struct cyttsp5 *ts, struct cyttsp5_sysinfo *si)
> > > +{
> > > +	int max_tch = si->sensing_conf_data.max_tch;
> > > +	int num_cur_tch;
> > > +	int length;
> > > +	struct cyttsp5_tch_abs_params *tch = &si->tch_hdr;
> > > +
> > > +	memcpy(si->xy_mode, ts->input_buf, TOUCH_INPUT_HEADER_SIZE);
> > > +
> > > +	cyttsp5_get_touch_axis(&num_cur_tch, tch->size,
> > > +			       tch->max, si->xy_mode + 3 + tch->ofs, tch->bofs);
> > > +	if (unlikely(num_cur_tch > max_tch))
> > > +		num_cur_tch = max_tch;
> > > +
> > > +	length = num_cur_tch * TOUCH_REPORT_SIZE;
> > > +
> > > +	memcpy(si->xy_data, &ts->input_buf[TOUCH_INPUT_HEADER_SIZE], length);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static irqreturn_t cyttsp5_handle_irq(int irq, void *handle)
> > > +{
> > > +	struct cyttsp5 *ts = handle;
> > > +	int report_id;
> > > +	int size;
> > > +	int rc;
> > > +
> > > +	rc = cyttsp5_read(ts, ts->input_buf, CY_MAX_INPUT);
> > > +	if (rc)
> > > +		return IRQ_HANDLED;
> > > +
> > > +	size = get_unaligned_le16(&ts->input_buf[0]);
> > > +
> > > +	/* check reset */
> > > +	if (size == 0) {
> > > +		memcpy(ts->response_buf, ts->input_buf, 2);
> > > +
> > > +		mutex_lock(&ts->system_lock);
> > > +		ts->hid_cmd_state = HID_CMD_DONE;
> > > +		mutex_unlock(&ts->system_lock);
> > > +		wake_up(&ts->wait_q);  
> > 
> > I'd use spinlock in wait queue and wake_up_locked() instead of a
> > separate mutex.
> 
> Hum, okay, I will try that.
> 
> > 
> > > +		return IRQ_HANDLED;
> > > +	}
> > > +
> > > +	report_id = ts->input_buf[2];
> > > +  
> > 
> > 	switch(report_id) {
> > 	}
> 
> Yep, it will be easier to understand.
> 
> > 
> > > +	if (report_id == HID_TOUCH_REPORT_ID) {
> > > +		move_touch_data(ts, &ts->sysinfo);
> > > +		cyttsp5_mt_attention(ts->dev);
> > > +	} else if (report_id == HID_BTN_REPORT_ID) {
> > > +		move_button_data(ts, &ts->sysinfo);
> > > +		cyttsp5_btn_attention(ts->dev);
> > > +	} else {
> > > +		/* It is not an input but a command response */
> > > +		memcpy(ts->response_buf, ts->input_buf, size);
> > > +
> > > +		mutex_lock(&ts->system_lock);
> > > +		ts->hid_cmd_state = HID_CMD_DONE;
> > > +		mutex_unlock(&ts->system_lock);
> > > +		wake_up(&ts->wait_q);
> > > +	}
> > > +
> > > +	return IRQ_HANDLED;
> > > +}
> > > +
> > > +static int cyttsp5_deassert_int(struct cyttsp5 *ts)
> > > +{
> > > +	u16 size;
> > > +	u8 buf[2];
> > > +	int rc;
> > > +
> > > +	rc = regmap_bulk_read(ts->regmap, HID_INPUT_REG, buf, 2);
> > > +	if (rc < 0)
> > > +		return rc;
> > > +
> > > +	size = get_unaligned_le16(&buf[0]);
> > > +	if (size == 2 || size == 0)
> > > +		return 0;
> > > +
> > > +	return -EINVAL;
> > > +}
> > > +
> > > +static int cyttsp5_fill_all_touch(struct cyttsp5 *ts)
> > > +{
> > > +	struct cyttsp5_sysinfo *si = &ts->sysinfo;
> > > +
> > > +	fill_tch_abs(&si->tch_abs[CY_TCH_X], REPORT_SIZE_16,
> > > +		     TOUCH_REPORT_DESC_X);
> > > +	fill_tch_abs(&si->tch_abs[CY_TCH_Y], REPORT_SIZE_16,
> > > +		     TOUCH_REPORT_DESC_Y);
> > > +	fill_tch_abs(&si->tch_abs[CY_TCH_P], REPORT_SIZE_8,
> > > +		     TOUCH_REPORT_DESC_P);
> > > +	fill_tch_abs(&si->tch_abs[CY_TCH_T], REPORT_SIZE_5,
> > > +		     TOUCH_REPORT_DESC_CONTACTID);
> > > +	fill_tch_abs(&si->tch_hdr, REPORT_SIZE_5,
> > > +		     TOUCH_REPORT_DESC_HDR_CONTACTCOUNT);
> > > +	fill_tch_abs(&si->tch_abs[CY_TCH_MAJ], REPORT_SIZE_8,
> > > +		     TOUCH_REPORT_DESC_MAJ);
> > > +	fill_tch_abs(&si->tch_abs[CY_TCH_MIN], REPORT_SIZE_8,
> > > +		     TOUCH_REPORT_DESC_MIN);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int cyttsp5_startup(struct cyttsp5 *ts)
> > > +{
> > > +	int rc;
> > > +
> > > +	rc = cyttsp5_deassert_int(ts);
> > > +	if (rc) {
> > > +		dev_err(ts->dev, "Error on deassert int r=%d\n", rc);
> > > +		return -ENODEV;
> > > +	}
> > > +
> > > +	/*
> > > +	 * Launch the application as the device starts in bootloader mode
> > > +	 * because of a power-on-reset
> > > +	 */
> > > +	rc = cyttsp5_hid_output_bl_launch_app(ts);
> > > +	if (rc < 0) {
> > > +		dev_err(ts->dev, "Error on launch app r=%d\n", rc);
> > > +		return rc;
> > > +	}
> > > +
> > > +	rc = cyttsp5_get_hid_descriptor(ts, &ts->hid_desc);
> > > +	if (rc < 0) {
> > > +		dev_err(ts->dev, "Error on getting HID descriptor r=%d\n", rc);
> > > +		return rc;
> > > +	}
> > > +
> > > +	rc = cyttsp5_fill_all_touch(ts);
> > > +	if (rc < 0) {
> > > +		dev_err(ts->dev, "Error on report descriptor r=%d\n", rc);
> > > +		return rc;
> > > +	}
> > > +
> > > +	rc = cyttsp5_hid_output_get_sysinfo(ts);
> > > +	if (rc) {
> > > +		dev_err(ts->dev, "Error on getting sysinfo r=%d\n", rc);
> > > +		return rc;
> > > +	}
> > > +
> > > +	return rc;
> > > +}
> > > +
> > > +#ifdef CONFIG_OF
> > > +static const struct of_device_id cyttsp5_of_match[] = {
> > > +	{ .compatible = "cypress,cyttsp5", },
> > > +	{ }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, cyttsp5_of_match);
> > > +#endif
> > > +
> > > +static const struct i2c_device_id cyttsp5_i2c_id[] = {
> > > +	{ CYTTSP5_NAME, 0, },
> > > +	{ }
> > > +};
> > > +MODULE_DEVICE_TABLE(i2c, cyttsp5_i2c_id);
> > > +
> > > +static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
> > > +			 const char *name)
> > > +{
> > > +	struct cyttsp5 *ts;
> > > +	struct cyttsp5_sysinfo *si;
> > > +	int rc = 0, i;
> > > +
> > > +	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> > > +	if (!ts)
> > > +		return -ENOMEM;
> > > +
> > > +	/* Initialize device info */
> > > +	ts->regmap = regmap;
> > > +	ts->dev = dev;
> > > +	si = &ts->sysinfo;
> > > +	dev_set_drvdata(dev, ts);
> > > +
> > > +	/* Initialize mutexes and spinlocks */
> > > +	mutex_init(&ts->system_lock);
> > > +
> > > +	/* Initialize wait queue */
> > > +	init_waitqueue_head(&ts->wait_q);
> > > +
> > > +	/* Reset the gpio to be in a reset state */
> > > +	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> > > +	if (IS_ERR(ts->reset_gpio)) {
> > > +		rc = PTR_ERR(ts->reset_gpio);
> > > +		dev_err(dev, "Failed to request reset gpio, error %d\n", rc);
> > > +		return rc;
> > > +	}
> > > +	gpiod_set_value(ts->reset_gpio, 1);  
> > 
> > Why not request it as GPIOD_OUT_HIGH if you going to activate it
> > immediately? However it sounds as if you have a reset line that is
> > active low and you want to driver it low to reset, and then release. In
> > this case you need to do
> > 
> > 	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> > 	<delay> - chip usually needs to be some time in reset state
> > 	gpiod_set_value(ts->reset_gpio, 0);
> > 
> > and make sure that correct polarity is specified in device tree.
> 
> Okay, I will update it too.
> 
> > 
> > > +
> > > +	/* Need a delay to have device up */
> > > +	msleep(20);
> > > +
> > > +	rc = devm_request_threaded_irq(dev, irq, NULL, cyttsp5_handle_irq,
> > > +				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,  
> > 
> > Just use IRQF_ONESHOT and make sure DTS specifies interrupt properly.
> > BTW,I'd recommend using level, not edge interrupts. It is so easy to
> > miss an edge.
> 
> Okay, thank you for the advice.
> 
> > 
> > > +				       name, ts);
> > > +	if (rc) {
> > > +		dev_err(dev, "unable to request IRQ\n");
> > > +		return rc;
> > > +	}
> > > +
> > > +	rc = cyttsp5_startup(ts);
> > > +	if (rc) {
> > > +		dev_err(ts->dev, "Fail initial startup r=%d\n", rc);
> > > +		return rc;
> > > +	}
> > > +
> > > +	rc = cyttsp5_parse_dt_key_code(dev);
> > > +	if (rc < 0) {
> > > +		dev_err(ts->dev, "Error while parsing dts %d\n", rc);
> > > +		return rc;
> > > +	}
> > > +
> > > +	ts->input = devm_input_allocate_device(dev);
> > > +	if (!ts->input) {
> > > +		dev_err(dev, "Error, failed to allocate input device\n");
> > > +		return -ENODEV;
> > > +	}
> > > +
> > > +	ts->input->name = "cyttsp5";
> > > +	scnprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
> > > +	ts->input->phys = ts->phys;
> > > +	ts->input->dev.parent = ts->dev;
> > > +	input_set_drvdata(ts->input, ts);
> > > +
> > > +	touchscreen_parse_properties(ts->input, true, NULL);
> > > +
> > > +	__set_bit(EV_KEY, ts->input->evbit);
> > > +	for (i = 0; i < si->num_btns; i++)
> > > +		__set_bit(si->key_code[i], ts->input->keybit);
> > > +
> > > +	return cyttsp5_setup_input_device(dev);
> > > +}
> > > +
> > > +static int cyttsp5_i2c_probe(struct i2c_client *client,
> > > +			     const struct i2c_device_id *id)
> > > +{
> > > +	struct regmap *regmap;
> > > +	static const struct regmap_config config = {
> > > +		.reg_bits = 8,
> > > +		.val_bits = 8,
> > > +	};
> > > +
> > > +	regmap = devm_regmap_init_i2c(client, &config);
> > > +	if (IS_ERR(regmap)) {
> > > +		dev_err(&client->dev, "regmap allocation failed: %ld\n",
> > > +			PTR_ERR(regmap));
> > > +		return PTR_ERR(regmap);
> > > +	}
> > > +
> > > +	return cyttsp5_probe(&client->dev, regmap, client->irq, client->name);
> > > +}
> > > +
> > > +static int cyttsp5_remove(struct device *dev)
> > > +{
> > > +	struct cyttsp5 *ts = dev_get_drvdata(dev);
> > > +
> > > +	input_unregister_device(ts->input);  
> > 
> > Not needed: you are using managed input device.
> 
> You are right, thanks.
> 
> > 
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int cyttsp5_i2c_remove(struct i2c_client *client)
> > > +{
> > > +	struct device *dev = &client->dev;
> > > +
> > > +	return cyttsp5_remove(dev);  
> > 
> > Not needed if you remove cyttsp5_remove().
> 
> Sure.
> 
> > 
> > > +}
> > > +
> > > +static struct i2c_driver cyttsp5_i2c_driver = {
> > > +	.driver = {
> > > +		.name = CYTTSP5_NAME,
> > > +		.owner = THIS_MODULE,
> > > +		.of_match_table = of_match_ptr(cyttsp5_of_match),
> > > +	},
> > > +	.probe = cyttsp5_i2c_probe,
> > > +	.remove = cyttsp5_i2c_remove,
> > > +	.id_table = cyttsp5_i2c_id,
> > > +};
> > > +
> > > +module_i2c_driver(cyttsp5_i2c_driver);
> > > +
> > > +MODULE_LICENSE("GPL");
> > > +MODULE_DESCRIPTION("Touchscreen driver for Cypress TrueTouch Gen 5 Product");
> > > +MODULE_AUTHOR("Mylène Josserand <mylene.josserand@free-electrons.com>");
> > > -- 
> > > 2.11.0
> > >   
> > 
> > Thanks.
> > 
> 
> Best regards,
> 
> -- 
> Mylène Josserand, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
> 

-- 
Dmitry

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2018-01-23 17:30 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-01 15:39 [PATCH v4 0/2] Input: Add Cypress Gen5 Touchscreen driver Mylène Josserand
2017-12-01 15:39 ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Mylène Josserand
2017-12-03 14:29   ` [PATCH] Input: fix platform_no_drv_owner.cocci warnings kbuild test robot
2017-12-03 14:29   ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen kbuild test robot
2017-12-13 11:37   ` kbuild test robot
2017-12-13 11:37   ` [RFC PATCH] Input: hid_cmd_state can be static kbuild test robot
2018-01-22 12:50   ` [PATCH v4 1/2] Input: Add driver for Cypress Generation 5 touchscreen Maxime Ripard
     [not found]   ` <20171201153957.13053-2-mylene.josserand-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2018-01-22 20:11     ` Marcus Folkesson
2018-01-23  9:33       ` Mylene Josserand
2018-01-23  4:15     ` Dmitry Torokhov
2018-01-23 10:44       ` Mylene Josserand
     [not found]         ` <20180123114459.07cc3404-K8i4uRanGBt8XcdJbWeDu7NAH6kLmebB@public.gmane.org>
2018-01-23 10:50           ` landyn.lawrence-jHc5sQ61u836K7/ahGyk6A
2018-01-23 17:30         ` Dmitry Torokhov
2017-12-01 15:39 ` [PATCH v4 2/2] dt-bindings: input: Add documentation for cyttsp5 Mylène Josserand

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).