[PATCH 0/3] ARM: dts: imx6ull: fix some incompatibilities between i.MX6UL and i.MX6ULL

[PATCH 0/3] ARM: dts: imx6ull: fix some incompatibilities between i.MX6UL and i.MX6ULL

[Lothar Waßmann]

This patchset addresses some differences between i.MX6UL and i.MX6ULL
which have slipped through the cracks so far.

- UART8 is not on SPBA but on AIPS-3
- i.MX6ULL has an ESAI interface in the address range of the UART8 on i.MX6UL
- i.MX6ULL does not have a CAAM unit nor SIM interfaces

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/3] ARM: dts: imx6ull: fix the i.MX6ULL UART8 configuration

[Lothar Waßmann]

UART8 on i.MX6ULL is not located on the SPBA bus like on i.MX6UL but
on the (otherwise unused) AIPS-3 bus.
Create the appropriate AIPS-3 bus configuration and move the uart8
definition where it belongs.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx6ull.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 0c18291..abc815f 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -41,3 +41,32 @@
 
 #include "imx6ul.dtsi"
 #include "imx6ull-pinfunc.h"
+
+/ {
+	soc {
+		aips-bus@2000000 {
+			spba-bus@2000000 {
+				/delete-node/ serial@2024000;
+			};
+		};
+
+		aips3: aips-bus@2200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			uart8: serial@2288000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_UART8_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
-- 
2.1.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ARM: dts: imx6ull: fix the i.MX6ULL UART8 configuration

[Dong Aisheng]

On Fri, Jan 26, 2018 at 09:23:50AM +0100, Lothar Waßmann wrote:
> UART8 on i.MX6ULL is not located on the SPBA bus like on i.MX6UL but
> on the (otherwise unused) AIPS-3 bus.
> Create the appropriate AIPS-3 bus configuration and move the uart8
> definition where it belongs.
> 
> Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>

Stefan seemed already fixed this.

See:
https://patchwork.kernel.org/patch/10156125/

Regards
Dong Aisheng

> ---
>  arch/arm/boot/dts/imx6ull.dtsi | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index 0c18291..abc815f 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -41,3 +41,32 @@
>  
>  #include "imx6ul.dtsi"
>  #include "imx6ull-pinfunc.h"
> +
> +/ {
> +	soc {
> +		aips-bus@2000000 {
> +			spba-bus@2000000 {
> +				/delete-node/ serial@2024000;
> +			};
> +		};
> +
> +		aips3: aips-bus@2200000 {
> +			compatible = "fsl,aips-bus", "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			reg = <0x02200000 0x100000>;
> +			ranges;
> +
> +			uart8: serial@2288000 {
> +				compatible = "fsl,imx6ul-uart",
> +					     "fsl,imx6q-uart";
> +				reg = <0x02288000 0x4000>;
> +				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clks IMX6UL_CLK_IPG>,
> +					 <&clks IMX6UL_CLK_UART8_SERIAL>;
> +				clock-names = "ipg", "per";
> +				status = "disabled";
> +			};
> +		};
> +	};
> +};
> -- 
> 2.1.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] ARM: dts: imx6ull: add support for the esai interface

[Lothar Waßmann]

The address space taken by the UART8 on the i.MX6UL is used for the
ESAI interface on i.MX6ULL.

Since the ESAI unit on i.MX6ULL has two more bits in the TFCR register
(TFIN, TAENB) it deserves to get its own compatible string, though the
bits are currently not used by the driver.

Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
---
 Documentation/devicetree/bindings/sound/fsl,esai.txt |  4 ++--
 arch/arm/boot/dts/imx6ull.dtsi                       | 17 +++++++++++++++++
 sound/soc/fsl/fsl_esai.c                             |  1 +
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index cacd18b..4103f46 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -7,8 +7,8 @@ other DSPs. It has up to six transmitters and four receivers.
 
 Required properties:
 
-  - compatible		: Compatible list, must contain "fsl,imx35-esai" or
-			  "fsl,vf610-esai"
+  - compatible		: Compatible list, must contain "fsl,imx35-esai",
+			  "fsl,vf610-esai" or "fsl,imx6ull-esai"
 
   - reg			: Offset and length of the register set for the device.
 
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index abc815f..8724fdb2 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -47,6 +47,23 @@
 		aips-bus@2000000 {
 			spba-bus@2000000 {
 				/delete-node/ serial@2024000;
+
+				esai: esai@2024000 {
+					compatible = "fsl,imx6ull-esai", "fsl,imx35-esai";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6ULL_CLK_ESAI_IPG>,
+						 <&clks IMX6ULL_CLK_ESAI_MEM>,
+						 <&clks IMX6ULL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6ULL_CLK_ESAI_IPG>,
+						 <&clks IMX6UL_CLK_SPBA>;
+					clock-names = "core", "mem", "extal",
+						      "fsys", "spba";
+					dmas = <&sdma 0 21 0>,
+					       <&sdma 47 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 			};
 		};
 
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index cef79a1..5b6a53f 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -910,6 +910,7 @@ static int fsl_esai_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id fsl_esai_dt_ids[] = {
+	{ .compatible = "fsl,imx6ull-esai", },
 	{ .compatible = "fsl,imx35-esai", },
 	{ .compatible = "fsl,vf610-esai", },
 	{}
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/3] ARM: dts: imx6ull: add support for the esai interface

[Dong Aisheng]

On Fri, Jan 26, 2018 at 09:23:51AM +0100, Lothar Waßmann wrote:
> The address space taken by the UART8 on the i.MX6UL is used for the
> ESAI interface on i.MX6ULL.
> 
> Since the ESAI unit on i.MX6ULL has two more bits in the TFCR register
> (TFIN, TAENB) it deserves to get its own compatible string, though the
> bits are currently not used by the driver.
> 
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> ---
>  Documentation/devicetree/bindings/sound/fsl,esai.txt |  4 ++--
>  arch/arm/boot/dts/imx6ull.dtsi                       | 17 +++++++++++++++++
>  sound/soc/fsl/fsl_esai.c                             |  1 +

Should them be separate patches?

Otherwise this patch is ok to me.

Acked-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Dong Aisheng

>  3 files changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> index cacd18b..4103f46 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> @@ -7,8 +7,8 @@ other DSPs. It has up to six transmitters and four receivers.
>  
>  Required properties:
>  
> -  - compatible		: Compatible list, must contain "fsl,imx35-esai" or
> -			  "fsl,vf610-esai"
> +  - compatible		: Compatible list, must contain "fsl,imx35-esai",
> +			  "fsl,vf610-esai" or "fsl,imx6ull-esai"
>  
>    - reg			: Offset and length of the register set for the device.
>  
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index abc815f..8724fdb2 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -47,6 +47,23 @@
>  		aips-bus@2000000 {
>  			spba-bus@2000000 {
>  				/delete-node/ serial@2024000;
> +
> +				esai: esai@2024000 {
> +					compatible = "fsl,imx6ull-esai", "fsl,imx35-esai";
> +					reg = <0x02024000 0x4000>;
> +					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> +					clocks = <&clks IMX6ULL_CLK_ESAI_IPG>,
> +						 <&clks IMX6ULL_CLK_ESAI_MEM>,
> +						 <&clks IMX6ULL_CLK_ESAI_EXTAL>,
> +						 <&clks IMX6ULL_CLK_ESAI_IPG>,
> +						 <&clks IMX6UL_CLK_SPBA>;
> +					clock-names = "core", "mem", "extal",
> +						      "fsys", "spba";
> +					dmas = <&sdma 0 21 0>,
> +					       <&sdma 47 21 0>;
> +					dma-names = "rx", "tx";
> +					status = "disabled";
> +				};
>  			};
>  		};
>  
> diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> index cef79a1..5b6a53f 100644
> --- a/sound/soc/fsl/fsl_esai.c
> +++ b/sound/soc/fsl/fsl_esai.c
> @@ -910,6 +910,7 @@ static int fsl_esai_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id fsl_esai_dt_ids[] = {
> +	{ .compatible = "fsl,imx6ull-esai", },
>  	{ .compatible = "fsl,imx35-esai", },
>  	{ .compatible = "fsl,vf610-esai", },
>  	{}
> -- 
> 2.1.4
> 

Re: [PATCH 2/3] ARM: dts: imx6ull: add support for the esai interface

[Rob Herring]

On Fri, Jan 26, 2018 at 09:23:51AM +0100, Lothar Waßmann wrote:
> The address space taken by the UART8 on the i.MX6UL is used for the
> ESAI interface on i.MX6ULL.
> 
> Since the ESAI unit on i.MX6ULL has two more bits in the TFCR register
> (TFIN, TAENB) it deserves to get its own compatible string, though the
> bits are currently not used by the driver.
> 
> Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/sound/fsl,esai.txt |  4 ++--
>  arch/arm/boot/dts/imx6ull.dtsi                       | 17 +++++++++++++++++
>  sound/soc/fsl/fsl_esai.c                             |  1 +
>  3 files changed, 20 insertions(+), 2 deletions(-)

As mentioned, this really should be 3 patches. At least split out the 
dts file.

> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> index cacd18b..4103f46 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> @@ -7,8 +7,8 @@ other DSPs. It has up to six transmitters and four receivers.
>  
>  Required properties:
>  
> -  - compatible		: Compatible list, must contain "fsl,imx35-esai" or
> -			  "fsl,vf610-esai"
> +  - compatible		: Compatible list, must contain "fsl,imx35-esai",
> +			  "fsl,vf610-esai" or "fsl,imx6ull-esai"

Please reformat as on compatible per line.

>  
>    - reg			: Offset and length of the register set for the device.
>  
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index abc815f..8724fdb2 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -47,6 +47,23 @@
>  		aips-bus@2000000 {
>  			spba-bus@2000000 {
>  				/delete-node/ serial@2024000;
> +
> +				esai: esai@2024000 {
> +					compatible = "fsl,imx6ull-esai", "fsl,imx35-esai";
> +					reg = <0x02024000 0x4000>;
> +					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> +					clocks = <&clks IMX6ULL_CLK_ESAI_IPG>,
> +						 <&clks IMX6ULL_CLK_ESAI_MEM>,
> +						 <&clks IMX6ULL_CLK_ESAI_EXTAL>,
> +						 <&clks IMX6ULL_CLK_ESAI_IPG>,
> +						 <&clks IMX6UL_CLK_SPBA>;
> +					clock-names = "core", "mem", "extal",
> +						      "fsys", "spba";
> +					dmas = <&sdma 0 21 0>,
> +					       <&sdma 47 21 0>;
> +					dma-names = "rx", "tx";
> +					status = "disabled";

Don't show status in examples.

> +				};
>  			};
>  		};
>  
> diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> index cef79a1..5b6a53f 100644
> --- a/sound/soc/fsl/fsl_esai.c
> +++ b/sound/soc/fsl/fsl_esai.c
> @@ -910,6 +910,7 @@ static int fsl_esai_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id fsl_esai_dt_ids[] = {
> +	{ .compatible = "fsl,imx6ull-esai", },
>  	{ .compatible = "fsl,imx35-esai", },
>  	{ .compatible = "fsl,vf610-esai", },
>  	{}
> -- 
> 2.1.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/3] ARM: dts: imx6ull: address some more incompatibilites between i.MX6UL and i.MX6ULL

[Lothar Waßmann]

The i.MX6ULL doesn't have the CAAM engine nor any SIM interface.
These are currently not implemented for i.MX6UL but it cannot hurt to
delete the corresponding nodes from the i.MX6ULL DTB anyway.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx6ull.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 8724fdb2..da325cd 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -67,6 +67,12 @@
 			};
 		};
 
+		aips-bus@2100000 {
+			/delete-node/ caam@21400000;
+			/delete-node/ sim@218c0000;
+			/delete-node/ sim@21b40000;
+		};
+
 		aips3: aips-bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
-- 
2.1.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] ARM: dts: imx6ull: address some more incompatibilites between i.MX6UL and i.MX6ULL

[Dong Aisheng]

On Fri, Jan 26, 2018 at 09:23:52AM +0100, Lothar Waßmann wrote:
> The i.MX6ULL doesn't have the CAAM engine nor any SIM interface.
> These are currently not implemented for i.MX6UL but it cannot hurt to
> delete the corresponding nodes from the i.MX6ULL DTB anyway.
> 
> Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>

Acked-by: Dong Aisheng <aisheng.dong-3arQi8VN3Tc@public.gmane.org>

Regards
Dong Aisheng

> ---
>  arch/arm/boot/dts/imx6ull.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index 8724fdb2..da325cd 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -67,6 +67,12 @@
>  			};
>  		};
>  
> +		aips-bus@2100000 {
> +			/delete-node/ caam@21400000;
> +			/delete-node/ sim@218c0000;
> +			/delete-node/ sim@21b40000;
> +		};
> +
>  		aips3: aips-bus@2200000 {
>  			compatible = "fsl,aips-bus", "simple-bus";
>  			#address-cells = <1>;
> -- 
> 2.1.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html