From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support Date: Sun, 28 Jan 2018 09:06:30 +0000 Message-ID: <20180128090630.35064e5c@archlinux> References: <20180126151941.12183-1-embed3d@gmail.com> <20180126151941.12183-9-embed3d@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180126151941.12183-9-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Philipp Rossak Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, knaack.h-Mmb7MZpHnFY@public.gmane.org, lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org, pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org, davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org, hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org, mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, rask-SivP7zSAdNDZaaYASwVUlg@public.gmane.org, clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, sean-hENCXIMQXOg@public.gmane.org, krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, icenowy-h8G6r0blFSE@public.gmane.org, edu.molinas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, singhalsimran0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, 26 Jan 2018 16:19:33 +0100 Philipp Rossak wrote: > This patch rewors the driver to support interrupts for the thermal part > of the sensor. > > This is only available for the newer sensor (currently H3 and A83T). > The interrupt will be trigerd on data available and triggers the update > for the thermal sensors. All newer sensors have different amount of > sensors and different interrupts for each device the reset of the > interrupts need to be done different > > For the newer sensors is the autosuspend disabled. > > Signed-off-by: Philipp Rossak Really minor point inline, otherwise this looks fine to me. Acked-by: Jonathan Cameron > --- > drivers/iio/adc/sun4i-gpadc-iio.c | 68 +++++++++++++++++++++++++++++++++++---- > include/linux/mfd/sun4i-gpadc.h | 33 +++++++++++++++++++ > 2 files changed, 95 insertions(+), 6 deletions(-) > > diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c > index 7b12666cdd9e..77e07f042730 100644 > --- a/drivers/iio/adc/sun4i-gpadc-iio.c > +++ b/drivers/iio/adc/sun4i-gpadc-iio.c > @@ -78,11 +78,14 @@ struct gpadc_data { > u32 ctrl2_map; > u32 sensor_en_map; > u32 filter_map; > + u32 irq_clear_map; > + u32 irq_control_map; > bool has_bus_clk; > bool has_bus_rst; > bool has_mod_clk; > int sensor_count; > bool supports_nvmem; > + bool support_irq; > }; > > static const struct gpadc_data sun4i_gpadc_data = { > @@ -97,6 +100,7 @@ static const struct gpadc_data sun4i_gpadc_data = { > .sample_end = sun4i_gpadc_sample_end, > .sensor_count = 1, > .supports_nvmem = false, > + .support_irq = false, > }; > > static const struct gpadc_data sun5i_gpadc_data = { > @@ -111,6 +115,7 @@ static const struct gpadc_data sun5i_gpadc_data = { > .sample_end = sun4i_gpadc_sample_end, > .sensor_count = 1, > .supports_nvmem = false, > + .support_irq = false, > }; > > static const struct gpadc_data sun6i_gpadc_data = { > @@ -125,6 +130,7 @@ static const struct gpadc_data sun6i_gpadc_data = { > .sample_end = sun4i_gpadc_sample_end, > .sensor_count = 1, > .supports_nvmem = false, > + .support_irq = false, > }; > > static const struct gpadc_data sun8i_a33_gpadc_data = { > @@ -136,6 +142,7 @@ static const struct gpadc_data sun8i_a33_gpadc_data = { > .sample_end = sun4i_gpadc_sample_end, > .sensor_count = 1, > .supports_nvmem = false, > + .support_irq = false, > }; > > struct sun4i_gpadc_iio { > @@ -339,6 +346,11 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val, > return 0; > } > > + if (info->data->support_irq) { > + regmap_read(info->regmap, info->data->temp_data[sensor], val); > + return 0; > + } > + > return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq); > } > > @@ -436,6 +448,17 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id) > return IRQ_HANDLED; > } > > +static irqreturn_t sunxi_irq_thread(int irq, void *data) > +{ > + struct sun4i_gpadc_iio *info = data; > + > + regmap_write(info->regmap, SUNXI_THS_STAT, info->data->irq_clear_map); > + > + thermal_zone_device_update(info->tzd, THERMAL_EVENT_TEMP_SAMPLE); > + > + return IRQ_HANDLED; > +} > + > static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info) > { > /* Disable the ADC on IP */ > @@ -448,6 +471,8 @@ static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info) > > static int sunxi_ths_sample_end(struct sun4i_gpadc_iio *info) > { > + /* Disable ths interrupt*/ Space before */ > + regmap_write(info->regmap, SUNXI_THS_INTC, 0x0); > /* Disable temperature sensor */ > regmap_write(info->regmap, SUNXI_THS_CTRL2, 0x0); > > @@ -509,9 +534,15 @@ static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info) > regmap_write(info->regmap, SUNXI_THS_CTRL2, > info->data->ctrl2_map); > > + regmap_write(info->regmap, SUNXI_THS_STAT, > + info->data->irq_clear_map); > + > regmap_write(info->regmap, SUNXI_THS_FILTER, > info->data->filter_map); > > + regmap_write(info->regmap, SUNXI_THS_INTC, > + info->data->irq_control_map); > + > regmap_read(info->regmap, SUNXI_THS_CTRL2, &value); > > regmap_write(info->regmap, SUNXI_THS_CTRL2, > @@ -625,12 +656,29 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev, > struct nvmem_cell *cell; > ssize_t cell_size; > u64 *cell_data; > + int irq; > > info->data = of_device_get_match_data(&pdev->dev); > if (!info->data) > return -ENODEV; > > - info->no_irq = true; > + if (info->data->support_irq) { > + /* only the new versions of ths support right now irqs */ > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) { > + dev_err(&pdev->dev, "failed to get IRQ: %d\n", irq); > + return irq; > + } > + > + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, > + sunxi_irq_thread, IRQF_ONESHOT, > + dev_name(&pdev->dev), info); > + if (ret) > + return ret; > + > + } else > + info->no_irq = true; > + > indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels); > indio_dev->channels = sun8i_a33_gpadc_channels; > > @@ -840,11 +888,13 @@ static int sun4i_gpadc_probe(struct platform_device *pdev) > if (ret) > return ret; > > - pm_runtime_set_autosuspend_delay(&pdev->dev, > - SUN4I_GPADC_AUTOSUSPEND_DELAY); > - pm_runtime_use_autosuspend(&pdev->dev); > - pm_runtime_set_suspended(&pdev->dev); > - pm_runtime_enable(&pdev->dev); > + if (!info->data->support_irq) { > + pm_runtime_set_autosuspend_delay(&pdev->dev, > + SUN4I_GPADC_AUTOSUSPEND_DELAY); > + pm_runtime_use_autosuspend(&pdev->dev); > + pm_runtime_set_suspended(&pdev->dev); > + pm_runtime_enable(&pdev->dev); > + } > > if (IS_ENABLED(CONFIG_THERMAL_OF)) { > for (i = 0; i < info->data->sensor_count; i++) { > @@ -865,6 +915,9 @@ static int sun4i_gpadc_probe(struct platform_device *pdev) > } > } > > + if (info->data->support_irq) > + info->data->sample_start(info); > + > ret = devm_iio_device_register(&pdev->dev, indio_dev); > if (ret < 0) { > dev_err(&pdev->dev, "could not register the device\n"); > @@ -894,6 +947,9 @@ static int sun4i_gpadc_remove(struct platform_device *pdev) > if (!IS_ENABLED(CONFIG_THERMAL_OF)) > return 0; > > + if (info->data->support_irq) > + info->data->sample_end(info); > + > thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd); > > if (!info->no_irq) > diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h > index c251002431bd..ab34a96a7ff3 100644 > --- a/include/linux/mfd/sun4i-gpadc.h > +++ b/include/linux/mfd/sun4i-gpadc.h > @@ -89,6 +89,8 @@ > /* SUNXI_THS COMMON REGISTERS + DEFINES */ > #define SUNXI_THS_CTRL0 0x00 > #define SUNXI_THS_CTRL2 0x40 > +#define SUNXI_THS_INTC 0x44 > +#define SUNXI_THS_STAT 0x48 > #define SUNXI_THS_FILTER 0x70 > #define SUNXI_THS_CDATA_0_1 0x74 > #define SUNXI_THS_CDATA_2_3 0x78 > @@ -107,6 +109,37 @@ > #define SUNXI_THS_TEMP_SENSE_EN2 BIT(2) > #define SUNXI_THS_TEMP_SENSE_EN3 BIT(3) > > +#define SUNXI_THS_TEMP_PERIOD(x) (GENMASK(31, 12) & ((x) << 12)) > + > +#define SUNXI_THS_INTS_ALARM_OFF_2 BIT(14) > +#define SUNXI_THS_INTS_ALARM_OFF_1 BIT(13) > +#define SUNXI_THS_INTS_ALARM_OFF_0 BIT(12) > +#define SUNXI_THS_INTS_TDATA_IRQ_3 BIT(11) > +#define SUNXI_THS_INTS_TDATA_IRQ_2 BIT(10) > +#define SUNXI_THS_INTS_TDATA_IRQ_1 BIT(9) > +#define SUNXI_THS_INTS_TDATA_IRQ_0 BIT(8) > +#define SUNXI_THS_INTS_SHUT_INT_3 BIT(7) > +#define SUNXI_THS_INTS_SHUT_INT_2 BIT(6) > +#define SUNXI_THS_INTS_SHUT_INT_1 BIT(5) > +#define SUNXI_THS_INTS_SHUT_INT_0 BIT(4) > +#define SUNXI_THS_INTS_ALARM_INT_3 BIT(3) > +#define SUNXI_THS_INTS_ALARM_INT_2 BIT(2) > +#define SUNXI_THS_INTS_ALARM_INT_1 BIT(1) > +#define SUNXI_THS_INTS_ALARM_INT_0 BIT(0) > + > +#define SUNXI_THS_INTC_TDATA_IRQ_EN3 BIT(11) > +#define SUNXI_THS_INTC_TDATA_IRQ_EN2 BIT(10) > +#define SUNXI_THS_INTC_TDATA_IRQ_EN1 BIT(9) > +#define SUNXI_THS_INTC_TDATA_IRQ_EN0 BIT(8) > +#define SUNXI_THS_INTC_SHUT_INT_EN3 BIT(7) > +#define SUNXI_THS_INTC_SHUT_INT_EN2 BIT(6) > +#define SUNXI_THS_INTC_SHUT_INT_EN1 BIT(5) > +#define SUNXI_THS_INTC_SHUT_INT_EN0 BIT(4) > +#define SUNXI_THS_INTC_ALARM_INT_EN3 BIT(3) > +#define SUNXI_THS_INTC_ALARM_INT_EN2 BIT(2) > +#define SUNXI_THS_INTC_ALARM_INT_EN1 BIT(1) > +#define SUNXI_THS_INTC_ALARM_INT_EN0 BIT(0) > + > #define MAX_SENSOR_COUNT 4 > > struct sun4i_gpadc_dev { -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html