From mboxrd@z Thu Jan 1 00:00:00 1970 From: Katsuhiro Suzuki Subject: [RESEND PATCH v2 8/9] arm64: dts: uniphier: add speaker out for UniPhier LD11/LD20 boards Date: Wed, 7 Feb 2018 18:10:48 +0900 Message-ID: <20180207091049.24700-9-suzuki.katsuhiro@socionext.com> References: <20180207091049.24700-1-suzuki.katsuhiro@socionext.com> Return-path: In-Reply-To: <20180207091049.24700-1-suzuki.katsuhiro@socionext.com> Sender: linux-kernel-owner@vger.kernel.org To: Mark Brown , alsa-devel@alsa-project.org, Rob Herring , devicetree@vger.kernel.org, Masahiro Yamada Cc: Masami Hiramatsu , Jassi Brar , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Katsuhiro Suzuki List-Id: devicetree@vger.kernel.org This patch adds codec node for TI TAS571x on UniPhier LD11/20 global boards. And adds settings of AIO for speaker out. Signed-off-by: Katsuhiro Suzuki --- .../boot/dts/socionext/uniphier-ld11-global.dts | 20 ++++++++++++++++++++ .../boot/dts/socionext/uniphier-ld20-global.dts | 20 ++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 4eb8d00a8c02..ca09251a3eab 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "uniphier-ld11.dtsi" +#include "dt-bindings/gpio/uniphier-gpio.h" / { model = "UniPhier LD11 Global Board (REF_LD11_GP)"; @@ -45,6 +46,7 @@ widgets = "Headphone", "Headphone Jack"; dais = <&i2s_port2 + &i2s_port3 &i2s_port4 &spdif_port0>; }; @@ -73,6 +75,20 @@ &i2c0 { status = "okay"; + tas5707a@1d { + compatible = "ti,tas5711"; + reg = <0x1d>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + + port@0 { + tas_speaker: endpoint { + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; + eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; @@ -109,17 +125,21 @@ i2s_port2: port@2 { i2s_line: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_line>; }; }; i2s_port3: port@3 { i2s_hpcmout1: endpoint { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; }; }; i2s_port4: port@4 { i2s_pcmout3: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_hp>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index ebcd65631bca..0728832ce552 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "uniphier-ld20.dtsi" +#include "dt-bindings/gpio/uniphier-gpio.h" / { model = "UniPhier LD20 Global Board (REF_LD20_GP)"; @@ -45,6 +46,7 @@ widgets = "Headphone", "Headphone Jack"; dais = <&i2s_port2 + &i2s_port3 &i2s_port4 &spdif_port0>; }; @@ -72,6 +74,20 @@ &i2c0 { status = "okay"; + + tas5707@1b { + compatible = "ti,tas5711"; + reg = <0x1b>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + + port@0 { + tas_speaker: endpoint { + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; }; &nand { @@ -91,17 +107,21 @@ i2s_port2: port@2 { i2s_line: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_line>; }; }; i2s_port3: port@3 { i2s_hpcmout1: endpoint { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; }; }; i2s_port4: port@4 { i2s_pcmout3: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_hp>; }; }; -- 2.15.0