On Tue, Feb 06, 2018 at 09:16:47PM +0800, Icenowy Zheng wrote: > Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form > factor and GPIO holes similar to Raspberry Pi Zero. > > It features: > - Allwinner H2+ SoC > - Single-chip (16-bit) 512MiB DDR3 DRAM > - Ampak AP6212 Wi-Fi/Bluetooth module > - MicroSD slot > - Two MicroUSB Type-B ports (one can only be used to power the board and > the other features OTG functionality) > - Two keys, a reset and a GPIO-connected key. > - HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+. > - CSI connector to connect the camera sensor provided by Sinovoip. > > Signed-off-by: Icenowy Zheng > --- > Changes in v4: > - Use SPDX license identifier. > > Changes in v3: > - Add comments about Vbus problem in &usbphy node. > > Changes in v2: > - Use high active SD card detect on the production batch. > > arch/arm/boot/dts/Makefile | 1 + > .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 126 +++++++++++++++++++++ > 2 files changed, 127 insertions(+) > create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index ade7a38543dc..d5a17e6e8b0f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -974,6 +974,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ > sun8i-a83t-cubietruck-plus.dtb \ > sun8i-a83t-tbs-a711.dtb \ > sun8i-h2-plus-orangepi-r1.dtb \ > + sun8i-h2-plus-bananapi-m2-zero.dtb \ > sun8i-h2-plus-orangepi-zero.dtb \ > sun8i-h3-bananapi-m2-plus.dtb \ > sun8i-h3-beelink-x2.dtb \ > diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > new file mode 100644 > index 000000000000..e2ee65a5bf92 > --- /dev/null > +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > @@ -0,0 +1,126 @@ > +/* > + * Copyright (C) 2017 Icenowy Zheng > + * > + * Based on sun8i-h3-bananapi-m2-plus.dts, which is: > + * Copyright (C) 2016 Chen-Yu Tsai > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) Sorry to be a bit picky about this, but this should be your very first line, see arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts for example. Thanks! Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com