From: Moritz Fischer <mdf@kernel.org>
To: Michal Simek <michal.simek@xilinx.com>
Cc: Moritz Fischer <mdf@kernel.org>,
linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org,
atull@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: fpga: Consolidate bridge properties
Date: Thu, 22 Feb 2018 09:30:08 -0800 [thread overview]
Message-ID: <20180222173008.GA12391@tyrael.ni.corp.natinst.com> (raw)
In-Reply-To: <8751fd85-fc84-f422-94e7-dd5689cb6922@xilinx.com>
[-- Attachment #1: Type: text/plain, Size: 5802 bytes --]
On Thu, Feb 22, 2018 at 08:12:19AM +0100, Michal Simek wrote:
> On 21.2.2018 18:33, Moritz Fischer wrote:
> > Consolidate bridge properties in a single file, instead of duplicating
> > the same optional property over and over again.
> >
> > Signed-off-by: Moritz Fischer <mdf@kernel.org>
> > Cc: Alan Tull <atull@kernel.org>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > ---
> > .../devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt | 5 +----
> > .../devicetree/bindings/fpga/altera-freeze-bridge.txt | 5 +----
> > .../devicetree/bindings/fpga/altera-hps2fpga-bridge.txt | 5 +----
> > Documentation/devicetree/bindings/fpga/fpga-bridge.txt | 15 +++++++++++++++
> > .../devicetree/bindings/fpga/xilinx-pr-decoupler.txt | 8 ++------
> > 5 files changed, 20 insertions(+), 18 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/fpga/fpga-bridge.txt
> >
> > diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> > index 817a8d4bf903..5dd0ff0f7b4e 100644
> > --- a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> > +++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
> > @@ -3,10 +3,7 @@ Altera FPGA To SDRAM Bridge Driver
> > Required properties:
> > - compatible : Should contain "altr,socfpga-fpga2sdram-bridge"
> >
> > -Optional properties:
> > -- bridge-enable : 0 if driver should disable bridge at startup
> > - 1 if driver should enable bridge at startup
> > - Default is to leave bridge in current state.
> > +See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
> >
> > Example:
> > fpga_bridge3: fpga-bridge@ffc25080 {
> > diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> > index f8e288c71b2d..8b26fbcff3c6 100644
> > --- a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> > +++ b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> > @@ -10,10 +10,7 @@ Required properties:
> > - compatible : Should contain "altr,freeze-bridge-controller"
> > - regs : base address and size for freeze bridge module
> >
> > -Optional properties:
> > -- bridge-enable : 0 if driver should disable bridge at startup
> > - 1 if driver should enable bridge at startup
> > - Default is to leave bridge in current state.
> > +See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
> >
> > Example:
> > freeze-controller@100000450 {
> > diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> > index 6406f9337eeb..68cce3945b10 100644
> > --- a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> > +++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
> > @@ -9,10 +9,7 @@ Required properties:
> > - resets : Phandle and reset specifier for this bridge's reset
> > - clocks : Clocks used by this module.
> >
> > -Optional properties:
> > -- bridge-enable : 0 if driver should disable bridge at startup.
> > - 1 if driver should enable bridge at startup.
> > - Default is to leave bridge in its current state.
> > +See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
> >
> > Example:
> > fpga_bridge0: fpga-bridge@ff400000 {
> > diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
> > new file mode 100644
> > index 000000000000..82607b23a287
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
> > @@ -0,0 +1,15 @@
> > +FPGA Bridge Device Tree Binding
> > +
> > +Moritz Fischer 2018 (Consolidated from previous bindings)
>
> nit: I would remove your name and year - it is visible from git log.
Yeah can get rid of that, I copied from fpga-region.txt :)
>
> > +
> > +Optional properties:
> > +- bridge-enable : 0 if driver should disable bridge at startup
> > + 1 if driver should enable bridge at startup
> > + Default is to leave bridge in current state.
> > +
> > +Example:
> > + fpga_bridge3: fpga-bridge@ffc25080 {
> > + compatible = "altr,socfpga-fpga2sdram-bridge";
> > + reg = <0xffc25080 0x4>;
> > + bridge-enable = <0>;
> > + };
> > diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > index 8dcfba926bc7..4284d293fa61 100644
> > --- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > @@ -18,12 +18,8 @@ Required properties:
> > - clocks : input clock to IP
> > - clock-names : should contain "aclk"
> >
> > -Optional properties:
> > -- bridge-enable : 0 if driver should disable bridge at startup
> > - 1 if driver should enable bridge at startup
> > - Default is to leave bridge in current state.
> > -
> > -See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
> > +See Documentation/devicetree/bindings/fpga/fpga-region.txt and
> > +Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
> >
> > Example:
> > fpga-bridge@100000450 {
> >
>
> Acked-by: Michal Simek <michal.simek@xilinx.com>
>
> Thanks,
> Michal
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
- Moritz
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2018-02-22 17:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-21 17:33 [PATCH] dt-bindings: fpga: Consolidate bridge properties Moritz Fischer
2018-02-21 18:47 ` Alan Tull
2018-02-22 7:12 ` Michal Simek
2018-02-22 17:30 ` Moritz Fischer [this message]
2018-03-01 22:41 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180222173008.GA12391@tyrael.ni.corp.natinst.com \
--to=mdf@kernel.org \
--cc=atull@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).