From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dong Aisheng Subject: Re: [PATCH v2 3/4] clk: imx: add SCCG PLL type Date: Wed, 28 Feb 2018 20:03:29 +0800 Message-ID: <20180228120329.GB17222@b29396-OptiPlex-7040> References: <20180201175412.9480-1-l.stach@pengutronix.de> <20180201175412.9480-3-l.stach@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20180201175412.9480-3-l.stach@pengutronix.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Lucas Stach Cc: "A . s . Dong" , devicetree@vger.kernel.org, Michael Turquette , Stephen Boyd , patchwork-lst@pengutronix.de, Rob Herring , linux-imx@nxp.com, kernel@pengutronix.de, Fabio Estevam , Shawn Guo , linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Thu, Feb 01, 2018 at 06:54:11PM +0100, Lucas Stach wrote: > The SCCG is a new PLL type introduced on i.MX8. Add support for this. > The driver currently misses the PLL lock check, as the preliminary > documentation mentions lock configurations, but is quiet about where > to find the actual lock status signal. > Why? Can't use PLL_LOCK bit? BTW, i think the comments should mention that it breaks down the SSCG PLL into two PLLS part with a few extra dividers. The easiest way for user may compose them into one. But as this PLL indeed is much complicated, i'm ok to divide them tempoparily at this stage. > Signed-off-by: Lucas Stach > --- > drivers/clk/imx/Makefile | 3 +- > drivers/clk/imx/clk-sccg-pll.c | 235 +++++++++++++++++++++++++++++++++++++++++ > drivers/clk/imx/clk.h | 9 ++ > 3 files changed, 246 insertions(+), 1 deletion(-) > create mode 100644 drivers/clk/imx/clk-sccg-pll.c > > diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile > index 9892ae63539c..bfcbd5272d12 100644 > --- a/drivers/clk/imx/Makefile > +++ b/drivers/clk/imx/Makefile > @@ -12,7 +12,8 @@ obj-y += \ > clk-pllv1.o \ > clk-pllv2.o \ > clk-pllv3.o \ > - clk-pfd.o > + clk-pfd.o \ > + clk-sccg-pll.o > > obj-$(CONFIG_SOC_IMX1) += clk-imx1.o > obj-$(CONFIG_SOC_IMX21) += clk-imx21.o > diff --git a/drivers/clk/imx/clk-sccg-pll.c b/drivers/clk/imx/clk-sccg-pll.c > new file mode 100644 > index 000000000000..3a79f952564b > --- /dev/null > +++ b/drivers/clk/imx/clk-sccg-pll.c > @@ -0,0 +1,235 @@ > +/* > + * Copyright 2017 NXP. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include > +#include > +#include > +#include > + > +#include "clk.h" > + > +/* PLL CFGs */ > +#define PLL_CFG0 0x0 > +#define PLL_CFG1 0x4 > +#define PLL_CFG2 0x8 > + > +#define PLL_DIVF1_SHIFT 13 > +#define PLL_DIVF2_SHIFT 7 > +#define PLL_DIVF_MASK 0x3f > + > +#define PLL_DIVR1_SHIFT 25 > +#define PLL_DIVR2_SHIFT 19 > +#define PLL_DIVR1_MASK 0x3 > +#define PLL_DIVR2_MASK 0x3f > +#define PLL_REF_SHIFT 0 > +#define PLL_REF_MASK 0x3 > + > +#define PLL_LOCK 31 > +#define PLL_PD 7 > + > +#define OSC_25M 25000000 > +#define OSC_27M 27000000 > + > +struct clk_sccg_pll { > + struct clk_hw hw; > + void __iomem *base; > +}; > + > +#define to_clk_sccg_pll(_hw) container_of(_hw, struct clk_sccg_pll, hw) > + > +static int clk_pll1_is_prepared(struct clk_hw *hw) > +{ > + struct clk_sccg_pll *pll = to_clk_sccg_pll(hw); > + u32 val; > + > + val = readl_relaxed(pll->base + PLL_CFG0); > + return (val & (1 << PLL_PD)) ? 0 : 1; BM_PLL_PD BIT(7) > +} > + > +static unsigned long clk_pll1_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct clk_sccg_pll *pll = to_clk_sccg_pll(hw); > + u32 val, divf; > + > + val = readl_relaxed(pll->base + PLL_CFG2); > + divf = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK; > + > + return parent_rate * 2 * (divf + 1); > +} > + > +static long clk_pll1_round_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long *prate) > +{ > + unsigned long parent_rate = *prate; > + u32 div; > + > + div = rate / (parent_rate * 2); > + > + return parent_rate * div * 2; > +} > + > +static int clk_pll1_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct clk_sccg_pll *pll = to_clk_sccg_pll(hw); > + u32 val; > + u32 divf; > + > + divf = rate / (parent_rate * 2); > + > + val = readl_relaxed(pll->base + PLL_CFG2); > + val &= ~(PLL_DIVF_MASK << PLL_DIVF1_SHIFT); > + val |= (divf - 1) << PLL_DIVF1_SHIFT; > + writel_relaxed(val, pll->base + PLL_CFG2); > + > + /* FIXME: PLL lock check */ > + > + return 0; > +} > + > +static int clk_pll1_prepare(struct clk_hw *hw) > +{ > + struct clk_sccg_pll *pll = to_clk_sccg_pll(hw); > + u32 val; > + > + val = readl_relaxed(pll->base); > + val &= ~(1 << PLL_PD); > + writel_relaxed(val, pll->base); > + > + /* FIXME: PLL lock check */ > + > + return 0; > +} > + > +static void clk_pll1_unprepare(struct clk_hw *hw) > +{ > + struct clk_sccg_pll *pll = to_clk_sccg_pll(hw); > + u32 val; > + > + val = readl_relaxed(pll->base); > + val |= (1 << PLL_PD); > + writel_relaxed(val, pll->base); > +} > + > +static unsigned long clk_pll2_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct clk_sccg_pll *pll = to_clk_sccg_pll(hw); > + u32 val, ref, divr1, divf1, divr2, divf2; > + u64 temp64; > + > + val = readl_relaxed(pll->base + PLL_CFG0); > + switch ((val >> PLL_REF_SHIFT) & PLL_REF_MASK) { > + case 0: > + ref = OSC_25M; > + break; > + case 1: > + ref = OSC_27M; > + break; > + default: > + ref = OSC_25M; > + break; > + } > + > + val = readl_relaxed(pll->base + PLL_CFG2); > + divr1 = (val >> PLL_DIVR1_SHIFT) & PLL_DIVR1_MASK; > + divr2 = (val >> PLL_DIVR2_SHIFT) & PLL_DIVR2_MASK; > + divf1 = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK; > + divf2 = (val >> PLL_DIVF2_SHIFT) & PLL_DIVF_MASK; > + > + temp64 = ref * 2; > + temp64 *= (divf1 + 1) * (divf2 + 1); > + > + do_div(temp64, (divr1 + 1) * (divr2 + 1)); > + Here it looks strange to me. We break down the SSCG PLL into two parts. But here we manually calculate the PLL rate from HW register value instead of referring to the parent_rate. Seems like a layer violation. Any strong reason to do this? > + return (unsigned long)temp64; > +} > + > +static long clk_pll2_round_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long *prate) > +{ > + u32 div; > + unsigned long parent_rate = *prate; > + > + div = rate / (parent_rate); > + > + return parent_rate * div; > +} > + > +static int clk_pll2_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + u32 val; > + u32 divf; > + struct clk_sccg_pll *pll = to_clk_sccg_pll(hw); > + > + divf = rate / (parent_rate); > + > + val = readl_relaxed(pll->base + PLL_CFG2); > + val &= ~(PLL_DIVF_MASK << PLL_DIVF2_SHIFT); > + val |= (divf - 1) << PLL_DIVF2_SHIFT; > + writel_relaxed(val, pll->base + PLL_CFG2); I wonder pretending the PLL2 as a simple divider (only mult divf2) may break the fractional divider capability. Probably we shouldn't create another divider behind pll2. e.g. sys1_pll2_div > + > + /* FIXME: PLL lock check */ > + check PLL_LOCK here > + return 0; > +} > + > +static const struct clk_ops clk_sccg_pll1_ops = { > + .is_prepared = clk_pll1_is_prepared, Should this belong to pll2? > + .recalc_rate = clk_pll1_recalc_rate, > + .round_rate = clk_pll1_round_rate, > + .set_rate = clk_pll1_set_rate, > +}; > + > +static const struct clk_ops clk_sccg_pll2_ops = { > + .prepare = clk_pll1_prepare, > + .unprepare = clk_pll1_unprepare, > + .recalc_rate = clk_pll2_recalc_rate, > + .round_rate = clk_pll2_round_rate, > + .set_rate = clk_pll2_set_rate, > +}; > + > +struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name, > + void __iomem *base, enum imx_sccg_pll_type pll_type) > +{ > + struct clk_sccg_pll *pll; > + struct clk *clk; > + struct clk_init_data init; > + > + pll = kzalloc(sizeof(*pll), GFP_KERNEL); > + if (!pll) > + return ERR_PTR(-ENOMEM); > + > + pll->base = base; > + init.name = name; > + switch (pll_type) { > + case SCCG_PLL1: > + init.ops = &clk_sccg_pll1_ops; > + break; > + case SCCG_PLL2: > + init.ops = &clk_sccg_pll2_ops; > + break; No default? > + } > + > + init.flags = 0; Should't assign CLK_SET_RATE_PARENT? > + init.parent_names = &parent_name; > + init.num_parents = 1; > + > + pll->hw.init = &init; > + > + clk = clk_register(NULL, &pll->hw); > + if (IS_ERR(clk)) > + kfree(pll); > + > + return clk; > +} > diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h > index 287610902ea8..809509758e24 100644 > --- a/drivers/clk/imx/clk.h > +++ b/drivers/clk/imx/clk.h > @@ -21,6 +21,11 @@ enum imx_pllv1_type { > IMX_PLLV1_IMX35, > }; > > +enum imx_sccg_pll_type { > + SCCG_PLL1, > + SCCG_PLL2, > +}; > + > struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name, > const char *parent, void __iomem *base); > > @@ -30,6 +35,10 @@ struct clk *imx_clk_pllv2(const char *name, const char *parent, > struct clk *imx_clk_frac_pll(const char *name, const char *parent_name, > void __iomem *base); > > +struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name, > + void __iomem *base, > + enum imx_sccg_pll_type pll_type); > + > enum imx_pllv3_type { > IMX_PLLV3_GENERIC, > IMX_PLLV3_SYS, Last, overally, i did not see the configuration of SSE bit as it changes the formula. SSE=0: PLLOUT = REF/DIVR1 * 2 * DIVF1/DIVR2 * DIVF2/DIVQ SSE=1: PLLOUT = REF/DIVR1 * 8 * DIVF1/DIVR2 * DIVF2/DIVQ Are we replying on the default register value? Regards Dong Aisheng > -- > 2.15.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-clk" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html