From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Thu, 1 Mar 2018 09:09:11 -0600 From: Bjorn Helgaas Subject: Re: [PATCH v2 2/2] PCI: histb: add an optional regulator for PCIe port power control Message-ID: <20180301150910.GB13722@bhelgaas-glaptop.roam.corp.google.com> References: <1516722337-1533-1-git-send-email-shawn.guo@linaro.org> <1516722337-1533-3-git-send-email-shawn.guo@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1516722337-1533-3-git-send-email-shawn.guo@linaro.org> To: Shawn Guo Cc: Bjorn Helgaas , Rob Herring , Fabio Estevam , Jianguo Sun , linux-pci@vger.kernel.org, devicetree@vger.kernel.org, project-aspen-dev@linaro.org List-ID: On Tue, Jan 23, 2018 at 11:45:37PM +0800, Shawn Guo wrote: > The power supply to PCIe port are often controlled by GPIO on some board > designs. Let's add an optional regulator which can be backed by GPIO to > control the power. > > Signed-off-by: Shawn Guo > --- > .../bindings/pci/hisilicon-histb-pcie.txt | 1 + > drivers/pci/dwc/pcie-histb.c | 21 +++++++++++++++++++++ > 2 files changed, 22 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt > index c84bc027930b..f995664e6d7f 100644 > --- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt > @@ -34,6 +34,7 @@ Required properties > > Optional properties: > - reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. > +- vpcie-supply: Should specify the regulator in charge of PCIe port power. s/Should specify the/The/ > - phys: List of phandle and phy mode specifier, should be 0. > - phy-names: Must be "phy". > > diff --git a/drivers/pci/dwc/pcie-histb.c b/drivers/pci/dwc/pcie-histb.c > index 6395394be5b4..8eb3028432b3 100644 > --- a/drivers/pci/dwc/pcie-histb.c > +++ b/drivers/pci/dwc/pcie-histb.c > @@ -64,6 +64,7 @@ struct histb_pcie { > struct reset_control *bus_reset; > void __iomem *ctrl; > int reset_gpio; > + struct regulator *vpcie; > }; > > static u32 histb_pcie_readl(struct histb_pcie *histb_pcie, u32 reg) > @@ -230,6 +231,9 @@ static void histb_pcie_host_disable(struct histb_pcie *hipcie) > > if (gpio_is_valid(hipcie->reset_gpio)) > gpio_set_value_cansleep(hipcie->reset_gpio, 0); > + > + if (hipcie->vpcie) > + regulator_disable(hipcie->vpcie); > } > > static int histb_pcie_host_enable(struct pcie_port *pp) > @@ -240,6 +244,14 @@ static int histb_pcie_host_enable(struct pcie_port *pp) > int ret; > > /* power on PCIe device if have */ > + if (hipcie->vpcie) { > + ret = regulator_enable(hipcie->vpcie); > + if (ret) { > + dev_err(dev, "failed to enable regulator: %d\n", ret); > + return ret; > + } > + } > + > if (gpio_is_valid(hipcie->reset_gpio)) > gpio_set_value_cansleep(hipcie->reset_gpio, 1); > > @@ -285,6 +297,8 @@ static int histb_pcie_host_enable(struct pcie_port *pp) > err_sys_clk: > clk_disable_unprepare(hipcie->bus_clk); > err_bus_clk: > + if (hipcie->vpcie) > + regulator_disable(hipcie->vpcie); > > return ret; > } > @@ -334,6 +348,13 @@ static int histb_pcie_probe(struct platform_device *pdev) > return PTR_ERR(pci->dbi_base); > } > > + hipcie->vpcie = devm_regulator_get_optional(dev, "vpcie"); > + if (IS_ERR(hipcie->vpcie)) { > + if (PTR_ERR(hipcie->vpcie) == -EPROBE_DEFER) > + return -EPROBE_DEFER; > + hipcie->vpcie = NULL; > + } > + > hipcie->reset_gpio = of_get_named_gpio_flags(np, > "reset-gpios", 0, &of_flags); > if (of_flags & OF_GPIO_ACTIVE_LOW) > -- > 1.9.1 >