On Wed, Apr 18, 2018 at 09:05:19AM -0500, Kyle Evans wrote: > On Tue, Jan 9, 2018 at 7:34 AM, Maxime Ripard > wrote: > > On Mon, Jan 08, 2018 at 09:30:57AM -0600, Kyle Evans wrote: > >> On Thu, Jan 4, 2018 at 8:01 AM, Maxime Ripard > >> wrote: > >> > On Fri, Dec 22, 2017 at 06:11:52PM +0800, Chen-Yu Tsai wrote: > >> >> On Fri, Dec 22, 2017 at 6:07 PM, Emmanuel Vadot wrote: > >> >> > On Fri, 22 Dec 2017 09:35:08 +0100 > >> >> > Maxime Ripard wrote: > >> >> > > >> >> >> On Thu, Dec 21, 2017 at 07:09:03PM +0100, Emmanuel Vadot wrote: > >> >> >> > > >> >> >> > Hi Maxime, > >> >> >> > > >> >> >> > On Thu, 21 Dec 2017 16:26:30 +0100 > >> >> >> > Maxime Ripard wrote: > >> >> >> > > >> >> >> > > Hi, > >> >> >> > > > >> >> >> > > On Thu, Dec 21, 2017 at 09:19:24AM -0600, Kyle Evans wrote: > >> >> >> > > > On Thu, Dec 21, 2017 at 8:55 AM, Maxime Ripard > >> >> >> > > > wrote: > >> >> >> > > > > Hi Kyle, > >> >> >> > > > > > >> >> >> > > > > On Tue, Dec 19, 2017 at 03:05:23PM -0600, kevans91-OYTqUY/oFF8@public.gmane.org wrote: > >> >> >> > > > >> Allwinner a83t has a 1 KB sid block with efuse for security rootkey and > >> >> >> > > > >> thermal calibration data, add node to describe it. > >> >> >> > > > >> > >> >> >> > > > >> a83t-sid is not currently supported by nvmem/sunxi-sid, but it is > >> >> >> > > > >> supported in an external driver for FreeBSD. > >> >> >> > > > >> > >> >> >> > > > >> Signed-off-by: Kyle Evans > >> >> >> > > > > > >> >> >> > > > > The patch looks fine in itself, but we've had a number of issues with > >> >> >> > > > > the register layout (and access patterns) in the past, so I'd rather > >> >> >> > > > > have something that works in Linux too if possible. > >> >> >> > > > > >> >> >> > > > I have a patch that I think should make it work fine on Linux [1], but > >> >> >> > > > I'm afraid I have little to no capability to test it myself and so I > >> >> >> > > > did not add it as well. > >> >> >> > > > > >> >> >> > > > I do know that the rootkey is offset 0x200 into the given space [2], > >> >> >> > > > as is the case with the H3, and that the readout quirk is not needed. > >> >> >> > > > I wasn't 100% sure that the a83t has 2Kbit worth of efuse space as the > >> >> >> > > > H3, but I do know that thermal data can be found at 0x34 and 0x38 in > >> >> >> > > > this space. > >> >> >> > > > >> >> >> > > Then maybe we should leave it aside until someone takes some time on > >> >> >> > > the A83t. > >> >> >> > > >> >> >> > Take some time on the Linux driver and do not apply this patch for > >> >> >> > now you mean ? > >> >> >> > >> >> >> Yep. > >> >> >> > >> >> >> Maxime > >> >> > > >> >> > Since linux doesn't have the compatible in it's driver what would > >> >> > be the harm to add the node in the DTS ? If a quirks is needed because > >> >> > some region is weird this would go in the driver right ? I don't see a > >> >> > technical problem for adding this node right now. > >> >> > If Kyle confirm the lenght of the region and that no quirk is needed > >> >> > will it be enough ? > >> >> > >> >> I guess I wasn't very clear. I'm OK with the patch going in. The device > >> >> node currently says nothing about how much efuse space there is. The > >> >> memory region covers that and the control section, and the size matches > >> >> what the memory map says. > >> >> > >> >> The size and offset of the efuse space would be dealt with in the driver. > >> > > >> > Let's merge it then. > >> > > >> > Acked-by: Maxime Ripard > >> > >> What does the timeline for these things normally look like? I'm new to > >> these parts. =) > > > > We're one week away from the merge window, so it's a bit late for it > > to be merged in 4.16, but it'll be in 4.17. > It's been two months and this still hasn't quite landed in > sunxi/for-next. =( May I ask the status on this? It seems to have fallen through the cracks, sorry :/ Can you resend it based on 4.17? Thanks! Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com