From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH 1/2] slimbus: ngd: dt-bindings: Add slim ngd dt bindings Date: Wed, 23 May 2018 11:40:23 -0500 Message-ID: <20180523164023.GA24671@rob-hp-laptop> References: <20180516165118.16551-1-srinivas.kandagatla@linaro.org> <20180516165118.16551-2-srinivas.kandagatla@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20180516165118.16551-2-srinivas.kandagatla@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Srinivas Kandagatla Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, girishm@quicinc.com, gregkh@linuxfoundation.org, broonie@kernel.org, linux-kernel@vger.kernel.org, bgoswami@codeaurora.org, kramasub@codeaurora.org, linux-arm-msm@vger.kernel.org, sdharia@quicinc.com List-Id: devicetree@vger.kernel.org On Wed, May 16, 2018 at 05:51:17PM +0100, Srinivas Kandagatla wrote: > This patch adds bindings for Qualcomm SLIMBus NGD controller found in > all new SoCs starting from B family. > SLIMBus NGD controller is a light-weight driver responsible for > communicating with SLIMBus slaves directly over the bus using messaging > interface and communicating with master component residing on ADSP for > bandwidth and data-channel management > > Signed-off-by: Srinivas Kandagatla > --- > .../bindings/slimbus/slim-ngd-qcom-ctrl.txt | 70 ++++++++++++++++++++++ > 1 file changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt > > diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt > new file mode 100644 > index 000000000000..c948fb098819 > --- /dev/null > +++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt > @@ -0,0 +1,70 @@ > +Qualcomm SLIMBus Non Generic Device (NGD) Controller binding > + > +SLIMBus NGD controller is a light-weight driver responsible for communicating > +with SLIMBus slaves directly over the bus using messaging interface and > +communicating with master component residing on ADSP for bandwidth and > +data-channel management > + > +Please refer to slimbus/bus.txt for details of the common SLIMBus bindings. > + > +- compatible: > + Usage: required > + Value type: > + Definition: must be "qcom,slim-ngd" SoC specific compatible needed. > + > +- reg: > + Usage: required > + Value type: > + Definition: must specify the base address and size of the controller > + register blocks. blocks? Is there more than one? If so, how many? > + > +- reg-names: > + Usage: required > + Value type: > + Definition: must be "ctrl" reg-names is pointless when there is only 1. > + > +- qcom,ngd-id > + Usage: required > + Value type: > + Definition: ngd instance id in the controller Why do you need this? > +- dmas > + Usage: required > + Value type: > + Definition: List of rx and tx dma channels > + > +- dma-names > + Usage: required > + Value type: > + Definition: must be "rx" and "tx". > + > +- interrupts: > + Usage: required > + Value type: > + Definition: must list controller IRQ. > + > +#address-cells > + Usage: required > + Refer to slimbus/bus.txt for details of the common SLIMBus bindings. > + > +#size-cells > + Usage: required > + Refer to slimbus/bus.txt for details of the common SLIMBus bindings. > + > += EXAMPLE > + > +slim@91c0000 { > + compatible = "qcom,slim-ngd"; > + reg = <0x91c0000 0x2C000>; > + reg-names = "ctrl"; > + interrupts = <0 163 0>; > + qcom,ngd-id = <1>; > + dmas = <&slimbam 3>, <&slimbam 4>; > + dma-names = "rx", "tx"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + codec@1 { > + compatible = "slim217,1a0"; > + reg = <1 0>; > + }; > +}; > -- > 2.16.2 >