From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: [RFC PATCH 13/40] dt-bindings: PCI: keystone: Add "reg-names" binding information Date: Fri, 21 Sep 2018 15:51:28 +0530 Message-ID: <20180921102155.22839-14-kishon@ti.com> References: <20180921102155.22839-1-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20180921102155.22839-1-kishon@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Jingoo Han , Joao Pinto , Bjorn Helgaas , Rob Herring , Lorenzo Pieralisi , Murali Karicheri , Kishon Vijay Abraham I , Gustavo.Pimentel@synopsys.com Cc: Mark Rutland , Santosh Shilimkar , Tero Kristo , Nishanth Menon , linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Add "reg-names" binding information in order for device tree node to be populated with the correct register strings. Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/pci/pci-keystone.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 2030ee0dc4f9..3a551687cfa2 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -12,8 +12,10 @@ described here as well as properties that are not applicable. Required Properties:- compatibility: "ti,keystone-pcie" -reg: index 1 is the base address and length of DW application registers. - index 2 is the base address and length of PCI device ID register. +reg: Three register ranges as listed in the reg-names property +reg-names: "dbics" for the DesignWare PCIe registers, "app" for the + TI specific application registers, "config" for the + configuration space address pcie_msi_intc : Interrupt controller device node for MSI IRQ chip interrupt-cells: should be set to 1 -- 2.17.1