From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v10 03/12] dt-binding: gce: add binding for gce client reg property Date: Mon, 22 Jul 2019 16:09:18 -0600 Message-ID: <20190722220918.GA24605@bogus> References: <20190701074842.15401-1-bibby.hsieh@mediatek.com> <20190701074842.15401-4-bibby.hsieh@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190701074842.15401-4-bibby.hsieh@mediatek.com> Sender: linux-kernel-owner@vger.kernel.org To: Bibby Hsieh Cc: Jassi Brar , Matthias Brugger , CK HU , Daniel Kurtz , Sascha Hauer , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com, Sascha Hauer , Philipp Zabel , Nicolas Boichat , YT Shen , Daoyuan Huang , Jiaguang Zhang , Dennis-YC Hsieh , Houlong Wei , ginny.chen@mediatek.com List-Id: devicetree@vger.kernel.org On Mon, Jul 01, 2019 at 03:48:33PM +0800, Bibby Hsieh wrote: > cmdq driver provide a function that get the relationship > of sub system number from device node for client. > add specification for #subsys-cells, mediatek,gce-client-reg. > > Signed-off-by: Bibby Hsieh > --- > .../devicetree/bindings/mailbox/mtk-gce.txt | 18 ++++++++++++++---- > 1 file changed, 14 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > index 1f7f8f2a3f49..d48282d6b02d 100644 > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > @@ -21,12 +21,21 @@ Required properties: > priority: Priority of GCE thread. > atomic_exec: GCE processing continuous packets of commands in atomic > way. > +- #subsys-cells: Should be 3. You don't need this if it is always 3 and/or is always a single phandle. > + <&phandle subsys_number start_offset size> > + phandle: Label name of a gce node. > + subsys_number: specify the sub-system id which is corresponding > + to the register address. > + start_offset: the start offset of register address that GCE can access. > + size: the total size of register address that GCE can access. > > Required properties for a client device: > - mboxes: Client use mailbox to communicate with GCE, it should have this > property and list of phandle, mailbox specifiers. > -- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding > - to the register address. > +Optional properties for a client device: > +- mediatek,gce-client-reg: Specify the sub-system id which is corresponding > + to the register address, it should have this property and list of phandle, > + sub-system specifiers. > > Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h' > or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids. > @@ -40,6 +49,7 @@ Example: > clocks = <&infracfg CLK_INFRA_GCE>; > clock-names = "gce"; > #mbox-cells = <3>; > + #subsys-cells = <3>; > }; > > Example for a client device: > @@ -48,9 +58,9 @@ Example for a client device: > compatible = "mediatek,mt8173-mmsys"; > mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, > <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; > - mediatek,gce-subsys = ; > mutex-event-eof = CMDQ_EVENT_MUTEX1_STREAM_EOF>; > - > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, > + <&gce SUBSYS_1401XXXX 0x2000 0x100>; > ... > }; > -- > 2.18.0 >