From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP Date: Sat, 27 Jul 2019 20:48:36 +0100 Message-ID: <20190727204836.1514265d@archlinux> References: <20190722154538.5314-1-david@lechnology.com> <20190722154538.5314-2-david@lechnology.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190722154538.5314-2-david@lechnology.com> Sender: linux-kernel-owner@vger.kernel.org To: David Lechner Cc: linux-iio@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring , Mark Rutland , =?UTF-8?B?QmVub8OudA==?= Cousson , Tony Lindgren , William Breathitt Gray , Thierry Reding , linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org List-Id: devicetree@vger.kernel.org On Mon, 22 Jul 2019 10:45:35 -0500 David Lechner wrote: > This documents device tree binding for the Texas Instruments Enhanced > Quadrature Encoder Pulse (eQEP) Module found in various TI SoCs. > > Signed-off-by: David Lechner Up to William given it is a counter binding, (unless Rob overrules) but new bindings are generally preferred as yaml. Content looks fine to me. Thanks, Jonathan > --- > .../devicetree/bindings/counter/ti-eqep.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > create mode 100644 Documentation/devicetree/bindings/counter/ti-eqep.txt > > diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.txt b/Documentation/devicetree/bindings/counter/ti-eqep.txt > new file mode 100644 > index 000000000000..fbcebc2c2cc2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/counter/ti-eqep.txt > @@ -0,0 +1,18 @@ > +Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module > + > +Required properties: > +- compatible: Must be "ti,am3352-eqep". > +- reg: Physical base address and size of the registers map. > +- clocks: Handle to the PWM's functional clock. > +- clock-names: Must be "fck". > +- interrupts: Handle to the eQEP event interrupt > + > +Example: > + > + eqep0: eqep@180 { > + compatible = "ti,am3352-eqep"; > + reg = <0x180 0x80>; > + clocks = <&l4ls_gclk>; > + clock-names = "fck"; > + interrupts = <79>; > + };