From: Philippe Schenker <dev@pschenker.ch>
To: marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
stefan@agner.ch, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Stefan Agner <stefan.agner@toradex.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org,
Philippe Schenker <philippe.schenker@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/22] ARM: dts: imx7-colibri: add GPIO wakeup key
Date: Tue, 30 Jul 2019 16:46:33 +0200 [thread overview]
Message-ID: <20190730144649.19022-7-dev@pschenker.ch> (raw)
In-Reply-To: <20190730144649.19022-1-dev@pschenker.ch>
From: Stefan Agner <stefan.agner@toradex.com>
Add wakeup GPIO key which is able to wake the system from sleep
modes (e.g. Suspend-to-Memory).
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 7 ++++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 3f2746169181..d4dbc4fc1adf 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -52,6 +52,20 @@
clock-frequency = <16000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ power {
+ label = "Wake-Up";
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
panel: panel {
compatible = "edt,et057090dhu";
backlight = <&bl>;
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 2480623c92ff..16d1a1ed1aff 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -741,12 +741,17 @@
pinctrl_gpio_lpsr: gpio1-grp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59
MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59
MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59
>;
};
+ pinctrl_gpiokeys: gpiokeysgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19
+ >;
+ };
+
pinctrl_i2c1: i2c1-grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f
--
2.22.0
next prev parent reply other threads:[~2019-07-30 14:46 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-30 14:46 [PATCH 00/22] This patchset holds some common changes that were never upstreamed Philippe Schenker
2019-07-30 14:46 ` [PATCH 01/22] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-07-30 14:46 ` [PATCH 02/22] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-07-30 14:46 ` [PATCH 03/22] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-07-30 14:46 ` [PATCH 04/22] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-07-30 14:46 ` [PATCH 05/22] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker [this message]
2019-07-30 14:46 ` [PATCH 07/22] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-07-30 14:46 ` [PATCH 08/22] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-07-30 14:46 ` [PATCH 09/22] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-07-30 14:46 ` [PATCH 10/22] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-07-30 14:46 ` [PATCH 11/22] ARM: dts: imx6: Add sleep state to can interfaces Philippe Schenker
2019-07-31 7:14 ` Michal Vokáč
2019-07-31 11:13 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-07-30 20:46 ` Fabio Estevam
2019-07-31 6:43 ` Philippe Schenker
2019-07-31 6:54 ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 13/22] ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-07-31 7:09 ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 14/22] ARM: dts: apalis-imx6: Add some example I2C devices Philippe Schenker
2019-07-30 20:53 ` Fabio Estevam
2019-07-31 11:36 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 15/22] ARM: dts: apalis-imx6: Add some optional " Philippe Schenker
2019-07-30 20:43 ` Fabio Estevam
2019-07-31 11:37 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 16/22] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-07-30 14:46 ` [PATCH 17/22] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-07-30 14:46 ` [PATCH 18/22] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-07-30 14:46 ` [PATCH 19/22] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-07-30 14:46 ` [PATCH 20/22] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-07-30 14:46 ` [PATCH 21/22] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-07-30 14:46 ` [PATCH 22/22] ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board Philippe Schenker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190730144649.19022-7-dev@pschenker.ch \
--to=dev@pschenker.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan.agner@toradex.com \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).