devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support
@ 2019-07-31  5:39 Andrew Jeffery
  2019-07-31  5:39 ` [PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding Andrew Jeffery
                   ` (4 more replies)
  0 siblings, 5 replies; 10+ messages in thread
From: Andrew Jeffery @ 2019-07-31  5:39 UTC (permalink / raw)
  To: netdev
  Cc: Andrew Jeffery, davem, robh+dt, mark.rutland, joel, andrew,
	f.fainelli, hkallweit1, devicetree, linux-arm-kernel,
	linux-aspeed, linux-kernel

Hello,

v2 of the ASPEED MDIO series addresses comments from Rob on the devicetree
bindings and Andrew on the driver itself.

v1 of the series can be found here:

http://patchwork.ozlabs.org/cover/1138140/

Please review!

Andrew

Andrew Jeffery (4):
  dt-bindings: net: Add aspeed,ast2600-mdio binding
  net: phy: Add mdio-aspeed
  net: ftgmac100: Add support for DT phy-handle property
  net: ftgmac100: Select ASPEED MDIO driver for the AST2600

 .../bindings/net/aspeed,ast2600-mdio.yaml     |  45 +++++
 drivers/net/ethernet/faraday/Kconfig          |   1 +
 drivers/net/ethernet/faraday/ftgmac100.c      |  37 ++++-
 drivers/net/phy/Kconfig                       |  13 ++
 drivers/net/phy/Makefile                      |   1 +
 drivers/net/phy/mdio-aspeed.c                 | 157 ++++++++++++++++++
 6 files changed, 250 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
 create mode 100644 drivers/net/phy/mdio-aspeed.c

-- 
2.20.1

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding
  2019-07-31  5:39 [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support Andrew Jeffery
@ 2019-07-31  5:39 ` Andrew Jeffery
  2019-07-31 18:00   ` Rob Herring
  2019-07-31  5:39 ` [PATCH net-next v2 2/4] net: phy: Add mdio-aspeed Andrew Jeffery
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 10+ messages in thread
From: Andrew Jeffery @ 2019-07-31  5:39 UTC (permalink / raw)
  To: netdev
  Cc: Andrew Jeffery, davem, robh+dt, mark.rutland, joel, andrew,
	f.fainelli, hkallweit1, devicetree, linux-arm-kernel,
	linux-aspeed, linux-kernel

The AST2600 splits out the MDIO bus controller from the MAC into its own
IP block and rearranges the register layout. Add a new binding to
describe the new hardware.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

---
v2:
* aspeed: Utilise mdio.yaml
* aspeed: Drop status from example
---
 .../bindings/net/aspeed,ast2600-mdio.yaml     | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml

diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
new file mode 100644
index 000000000000..71808e78a495
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/aspeed,ast2600-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 MDIO Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+  The ASPEED AST2600 MDIO controller is the third iteration of ASPEED's MDIO
+  bus register interface, this time also separating out the controller from the
+  MAC.
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    const: aspeed,ast2600-mdio
+  reg:
+    maxItems: 1
+    description: The register range of the MDIO controller instance
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    mdio0: mdio@1e650000 {
+            compatible = "aspeed,ast2600-mdio";
+            reg = <0x1e650000 0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethphy0: ethernet-phy@0 {
+                    compatible = "ethernet-phy-ieee802.3-c22";
+                    reg = <0>;
+            };
+    };
-- 
2.20.1

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH net-next v2 2/4] net: phy: Add mdio-aspeed
  2019-07-31  5:39 [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support Andrew Jeffery
  2019-07-31  5:39 ` [PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding Andrew Jeffery
@ 2019-07-31  5:39 ` Andrew Jeffery
  2019-08-01  3:53   ` Andrew Lunn
  2019-07-31  5:39 ` [PATCH net-next v2 3/4] net: ftgmac100: Add support for DT phy-handle property Andrew Jeffery
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 10+ messages in thread
From: Andrew Jeffery @ 2019-07-31  5:39 UTC (permalink / raw)
  To: netdev
  Cc: Andrew Jeffery, davem, robh+dt, mark.rutland, joel, andrew,
	f.fainelli, hkallweit1, devicetree, linux-arm-kernel,
	linux-aspeed, linux-kernel

The AST2600 design separates the MDIO controllers from the MAC, which is
where they were placed in the AST2400 and AST2500. Further, the register
interface is reworked again, so now we have three possible different
interface implementations, however this driver only supports the
interface provided by the AST2600. The AST2400 and AST2500 will continue
to be supported by the MDIO support embedded in the FTGMAC100 driver.

The hardware supports both C22 and C45 mode, but for the moment only C22
support is implemented.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

---
v2:
* Use readl_poll_timeout() instead of open-coded loop
* Error on C45 accesses
---
 drivers/net/phy/Kconfig       |  13 +++
 drivers/net/phy/Makefile      |   1 +
 drivers/net/phy/mdio-aspeed.c | 157 ++++++++++++++++++++++++++++++++++
 3 files changed, 171 insertions(+)
 create mode 100644 drivers/net/phy/mdio-aspeed.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 20f14c5fbb7e..206d8650ee7f 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -21,6 +21,19 @@ config MDIO_BUS
 
 if MDIO_BUS
 
+config MDIO_ASPEED
+	tristate "ASPEED MDIO bus controller"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on OF_MDIO && HAS_IOMEM
+	help
+	  This module provides a driver for the independent MDIO bus
+	  controllers found in the ASPEED AST2600 SoC. This is a driver for the
+	  third revision of the ASPEED MDIO register interface - the first two
+	  revisions are the "old" and "new" interfaces found in the AST2400 and
+	  AST2500, embedded in the MAC. For legacy reasons, FTGMAC100 driver
+	  continues to drive the embedded MDIO controller for the AST2400 and
+	  AST2500 SoCs, so say N if AST2600 support is not required.
+
 config MDIO_BCM_IPROC
 	tristate "Broadcom iProc MDIO bus controller"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 839acb292c38..ba07c27e4208 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -22,6 +22,7 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_led_triggers.o
 obj-$(CONFIG_PHYLINK)		+= phylink.o
 obj-$(CONFIG_PHYLIB)		+= libphy.o
 
+obj-$(CONFIG_MDIO_ASPEED)	+= mdio-aspeed.o
 obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
 obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
 obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/drivers/net/phy/mdio-aspeed.c b/drivers/net/phy/mdio-aspeed.c
new file mode 100644
index 000000000000..cad820568f75
--- /dev/null
+++ b/drivers/net/phy/mdio-aspeed.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Copyright (C) 2019 IBM Corp. */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "mdio-aspeed"
+
+#define ASPEED_MDIO_CTRL		0x0
+#define   ASPEED_MDIO_CTRL_FIRE		BIT(31)
+#define   ASPEED_MDIO_CTRL_ST		BIT(28)
+#define     ASPEED_MDIO_CTRL_ST_C45	0
+#define     ASPEED_MDIO_CTRL_ST_C22	1
+#define   ASPEED_MDIO_CTRL_OP		GENMASK(27, 26)
+#define     MDIO_C22_OP_WRITE		0b01
+#define     MDIO_C22_OP_READ		0b10
+#define   ASPEED_MDIO_CTRL_PHYAD	GENMASK(25, 21)
+#define   ASPEED_MDIO_CTRL_REGAD	GENMASK(20, 16)
+#define   ASPEED_MDIO_CTRL_MIIWDATA	GENMASK(15, 0)
+
+#define ASPEED_MDIO_DATA		0x4
+#define   ASPEED_MDIO_DATA_MDC_THRES	GENMASK(31, 24)
+#define   ASPEED_MDIO_DATA_MDIO_EDGE	BIT(23)
+#define   ASPEED_MDIO_DATA_MDIO_LATCH	GENMASK(22, 20)
+#define   ASPEED_MDIO_DATA_IDLE		BIT(16)
+#define   ASPEED_MDIO_DATA_MIIRDATA	GENMASK(15, 0)
+
+#define ASPEED_MDIO_INTERVAL_US		100
+#define ASPEED_MDIO_TIMEOUT_US		(ASPEED_MDIO_INTERVAL_US * 10)
+
+struct aspeed_mdio {
+	void __iomem *base;
+};
+
+static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+	struct aspeed_mdio *ctx = bus->priv;
+	u32 ctrl;
+	u32 data;
+	int rc;
+
+	dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d\n", __func__, addr,
+		regnum);
+
+	/* Just clause 22 for the moment */
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	ctrl = ASPEED_MDIO_CTRL_FIRE
+		| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum);
+
+	iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
+
+	rc = readl_poll_timeout(ctx->base + ASPEED_MDIO_DATA, data,
+				data & ASPEED_MDIO_DATA_IDLE,
+				ASPEED_MDIO_INTERVAL_US,
+				ASPEED_MDIO_TIMEOUT_US);
+	if (rc < 0)
+		return rc;
+
+	return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data);
+}
+
+static int aspeed_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
+{
+	struct aspeed_mdio *ctx = bus->priv;
+	u32 ctrl;
+
+	dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d, val: 0x%x\n",
+		__func__, addr, regnum, val);
+
+	/* Just clause 22 for the moment */
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	ctrl = ASPEED_MDIO_CTRL_FIRE
+		| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val);
+
+	iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
+
+	return readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl,
+				  !(ctrl & ASPEED_MDIO_CTRL_FIRE),
+				  ASPEED_MDIO_INTERVAL_US,
+				  ASPEED_MDIO_TIMEOUT_US);
+}
+
+static int aspeed_mdio_probe(struct platform_device *pdev)
+{
+	struct aspeed_mdio *ctx;
+	struct mii_bus *bus;
+	int rc;
+
+	bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*ctx));
+	if (!bus)
+		return -ENOMEM;
+
+	ctx = bus->priv;
+	ctx->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ctx->base))
+		return PTR_ERR(ctx->base);
+
+	bus->name = DRV_NAME;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
+	bus->parent = &pdev->dev;
+	bus->read = aspeed_mdio_read;
+	bus->write = aspeed_mdio_write;
+
+	rc = of_mdiobus_register(bus, pdev->dev.of_node);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+		return rc;
+	}
+
+	platform_set_drvdata(pdev, bus);
+
+	return 0;
+}
+
+static int aspeed_mdio_remove(struct platform_device *pdev)
+{
+	mdiobus_unregister(platform_get_drvdata(pdev));
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_mdio_of_match[] = {
+	{ .compatible = "aspeed,ast2600-mdio", },
+	{ },
+};
+
+static struct platform_driver aspeed_mdio_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = aspeed_mdio_of_match,
+	},
+	.probe = aspeed_mdio_probe,
+	.remove = aspeed_mdio_remove,
+};
+
+module_platform_driver(aspeed_mdio_driver);
+
+MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
+MODULE_LICENSE("GPL");
-- 
2.20.1

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH net-next v2 3/4] net: ftgmac100: Add support for DT phy-handle property
  2019-07-31  5:39 [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support Andrew Jeffery
  2019-07-31  5:39 ` [PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding Andrew Jeffery
  2019-07-31  5:39 ` [PATCH net-next v2 2/4] net: phy: Add mdio-aspeed Andrew Jeffery
@ 2019-07-31  5:39 ` Andrew Jeffery
  2019-08-01  3:55   ` Andrew Lunn
  2019-07-31  5:39 ` [PATCH net-next v2 4/4] net: ftgmac100: Select ASPEED MDIO driver for the AST2600 Andrew Jeffery
  2019-08-03  0:33 ` [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support David Miller
  4 siblings, 1 reply; 10+ messages in thread
From: Andrew Jeffery @ 2019-07-31  5:39 UTC (permalink / raw)
  To: netdev
  Cc: Andrew Jeffery, davem, robh+dt, mark.rutland, joel, andrew,
	f.fainelli, hkallweit1, devicetree, linux-arm-kernel,
	linux-aspeed, linux-kernel

phy-handle is necessary for the AST2600 which separates the MDIO
controllers from the MAC.

I've tried to minimise the intrusion of supporting the AST2600 to the
FTGMAC100 by leaving in place the existing MDIO support for the embedded
MDIO interface. The AST2400 and AST2500 continue to be supported this
way, as it avoids breaking/reworking existing devicetrees.

The AST2600 support by contrast requires the presence of the phy-handle
property in the MAC devicetree node to specify the appropriate PHY to
associate with the MAC. In the event that someone wants to specify the
MDIO bus topology under the MAC node on an AST2400 or AST2500, the
current auto-probe approach is done conditional on the absence of an
"mdio" child node of the MAC.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 37 +++++++++++++++++++++---
 1 file changed, 33 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 030fed65393e..563384b788ab 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/of.h>
+#include <linux/of_mdio.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
@@ -1619,8 +1620,13 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
 	if (!priv->mii_bus)
 		return -EIO;
 
-	if (priv->is_aspeed) {
-		/* This driver supports the old MDIO interface */
+	if (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
+	    of_device_is_compatible(np, "aspeed,ast2500-mac")) {
+		/* The AST2600 has a separate MDIO controller */
+
+		/* For the AST2400 and AST2500 this driver only supports the
+		 * old MDIO interface
+		 */
 		reg = ioread32(priv->base + FTGMAC100_OFFSET_REVR);
 		reg &= ~FTGMAC100_REVR_NEW_MDIO_INTERFACE;
 		iowrite32(reg, priv->base + FTGMAC100_OFFSET_REVR);
@@ -1797,7 +1803,8 @@ static int ftgmac100_probe(struct platform_device *pdev)
 
 	np = pdev->dev.of_node;
 	if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
-		   of_device_is_compatible(np, "aspeed,ast2500-mac"))) {
+		   of_device_is_compatible(np, "aspeed,ast2500-mac") ||
+		   of_device_is_compatible(np, "aspeed,ast2600-mac"))) {
 		priv->rxdes0_edorr_mask = BIT(30);
 		priv->txdes0_edotr_mask = BIT(30);
 		priv->is_aspeed = true;
@@ -1817,7 +1824,29 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		priv->ndev = ncsi_register_dev(netdev, ftgmac100_ncsi_handler);
 		if (!priv->ndev)
 			goto err_ncsi_dev;
-	} else {
+	} else if (np && of_get_property(np, "phy-handle", NULL)) {
+		struct phy_device *phy;
+
+		phy = of_phy_get_and_connect(priv->netdev, np,
+					     &ftgmac100_adjust_link);
+		if (!phy) {
+			dev_err(&pdev->dev, "Failed to connect to phy\n");
+			goto err_setup_mdio;
+		}
+
+		/* Indicate that we support PAUSE frames (see comment in
+		 * Documentation/networking/phy.txt)
+		 */
+		phy_support_asym_pause(phy);
+
+		/* Display what we found */
+		phy_attached_info(phy);
+	} else if (np && !of_get_child_by_name(np, "mdio")) {
+		/* Support legacy ASPEED devicetree descriptions that decribe a
+		 * MAC with an embedded MDIO controller but have no "mdio"
+		 * child node. Automatically scan the MDIO bus for available
+		 * PHYs.
+		 */
 		priv->use_ncsi = false;
 		err = ftgmac100_setup_mdio(netdev);
 		if (err)
-- 
2.20.1

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH net-next v2 4/4] net: ftgmac100: Select ASPEED MDIO driver for the AST2600
  2019-07-31  5:39 [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support Andrew Jeffery
                   ` (2 preceding siblings ...)
  2019-07-31  5:39 ` [PATCH net-next v2 3/4] net: ftgmac100: Add support for DT phy-handle property Andrew Jeffery
@ 2019-07-31  5:39 ` Andrew Jeffery
  2019-08-01  3:56   ` Andrew Lunn
  2019-08-03  0:33 ` [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support David Miller
  4 siblings, 1 reply; 10+ messages in thread
From: Andrew Jeffery @ 2019-07-31  5:39 UTC (permalink / raw)
  To: netdev
  Cc: Andrew Jeffery, davem, robh+dt, mark.rutland, joel, andrew,
	f.fainelli, hkallweit1, devicetree, linux-arm-kernel,
	linux-aspeed, linux-kernel

Ensures we can talk to a PHY via MDIO on the AST2600, as the MDIO
controller is now separate from the MAC.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/net/ethernet/faraday/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index a9b105803fb7..73e4f2648e49 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -32,6 +32,7 @@ config FTGMAC100
 	depends on ARM || NDS32 || COMPILE_TEST
 	depends on !64BIT || BROKEN
 	select PHYLIB
+	select MDIO_ASPEED if MACH_ASPEED_G6
 	---help---
 	  This driver supports the FTGMAC100 Gigabit Ethernet controller
 	  from Faraday. It is used on Faraday A369, Andes AG102 and some
-- 
2.20.1

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding
  2019-07-31  5:39 ` [PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding Andrew Jeffery
@ 2019-07-31 18:00   ` Rob Herring
  0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2019-07-31 18:00 UTC (permalink / raw)
  To: Andrew Jeffery
  Cc: netdev, David Miller, Mark Rutland, Joel Stanley, Andrew Lunn,
	Florian Fainelli, Heiner Kallweit, devicetree,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	linux-aspeed, linux-kernel

On Tue, Jul 30, 2019 at 11:39 PM Andrew Jeffery <andrew@aj.id.au> wrote:
>
> The AST2600 splits out the MDIO bus controller from the MAC into its own
> IP block and rearranges the register layout. Add a new binding to
> describe the new hardware.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
>
> ---
> v2:
> * aspeed: Utilise mdio.yaml
> * aspeed: Drop status from example
> ---
>  .../bindings/net/aspeed,ast2600-mdio.yaml     | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH net-next v2 2/4] net: phy: Add mdio-aspeed
  2019-07-31  5:39 ` [PATCH net-next v2 2/4] net: phy: Add mdio-aspeed Andrew Jeffery
@ 2019-08-01  3:53   ` Andrew Lunn
  0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2019-08-01  3:53 UTC (permalink / raw)
  To: Andrew Jeffery
  Cc: netdev, davem, robh+dt, mark.rutland, joel, f.fainelli,
	hkallweit1, devicetree, linux-arm-kernel, linux-aspeed,
	linux-kernel

On Wed, Jul 31, 2019 at 03:09:57PM +0930, Andrew Jeffery wrote:
> The AST2600 design separates the MDIO controllers from the MAC, which is
> where they were placed in the AST2400 and AST2500. Further, the register
> interface is reworked again, so now we have three possible different
> interface implementations, however this driver only supports the
> interface provided by the AST2600. The AST2400 and AST2500 will continue
> to be supported by the MDIO support embedded in the FTGMAC100 driver.
> 
> The hardware supports both C22 and C45 mode, but for the moment only C22
> support is implemented.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH net-next v2 3/4] net: ftgmac100: Add support for DT phy-handle property
  2019-07-31  5:39 ` [PATCH net-next v2 3/4] net: ftgmac100: Add support for DT phy-handle property Andrew Jeffery
@ 2019-08-01  3:55   ` Andrew Lunn
  0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2019-08-01  3:55 UTC (permalink / raw)
  To: Andrew Jeffery
  Cc: netdev, davem, robh+dt, mark.rutland, joel, f.fainelli,
	hkallweit1, devicetree, linux-arm-kernel, linux-aspeed,
	linux-kernel

On Wed, Jul 31, 2019 at 03:09:58PM +0930, Andrew Jeffery wrote:
> phy-handle is necessary for the AST2600 which separates the MDIO
> controllers from the MAC.
> 
> I've tried to minimise the intrusion of supporting the AST2600 to the
> FTGMAC100 by leaving in place the existing MDIO support for the embedded
> MDIO interface. The AST2400 and AST2500 continue to be supported this
> way, as it avoids breaking/reworking existing devicetrees.
> 
> The AST2600 support by contrast requires the presence of the phy-handle
> property in the MAC devicetree node to specify the appropriate PHY to
> associate with the MAC. In the event that someone wants to specify the
> MDIO bus topology under the MAC node on an AST2400 or AST2500, the
> current auto-probe approach is done conditional on the absence of an
> "mdio" child node of the MAC.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH net-next v2 4/4] net: ftgmac100: Select ASPEED MDIO driver for the AST2600
  2019-07-31  5:39 ` [PATCH net-next v2 4/4] net: ftgmac100: Select ASPEED MDIO driver for the AST2600 Andrew Jeffery
@ 2019-08-01  3:56   ` Andrew Lunn
  0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2019-08-01  3:56 UTC (permalink / raw)
  To: Andrew Jeffery
  Cc: netdev, davem, robh+dt, mark.rutland, joel, f.fainelli,
	hkallweit1, devicetree, linux-arm-kernel, linux-aspeed,
	linux-kernel

On Wed, Jul 31, 2019 at 03:09:59PM +0930, Andrew Jeffery wrote:
> Ensures we can talk to a PHY via MDIO on the AST2600, as the MDIO
> controller is now separate from the MAC.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support
  2019-07-31  5:39 [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support Andrew Jeffery
                   ` (3 preceding siblings ...)
  2019-07-31  5:39 ` [PATCH net-next v2 4/4] net: ftgmac100: Select ASPEED MDIO driver for the AST2600 Andrew Jeffery
@ 2019-08-03  0:33 ` David Miller
  4 siblings, 0 replies; 10+ messages in thread
From: David Miller @ 2019-08-03  0:33 UTC (permalink / raw)
  To: andrew
  Cc: netdev, robh+dt, mark.rutland, joel, andrew, f.fainelli,
	hkallweit1, devicetree, linux-arm-kernel, linux-aspeed,
	linux-kernel

From: Andrew Jeffery <andrew@aj.id.au>
Date: Wed, 31 Jul 2019 15:09:55 +0930

> v2 of the ASPEED MDIO series addresses comments from Rob on the devicetree
> bindings and Andrew on the driver itself.
> 
> v1 of the series can be found here:
> 
> http://patchwork.ozlabs.org/cover/1138140/
> 
> Please review!

Series applied, thank you.

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2019-08-03  0:33 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-31  5:39 [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support Andrew Jeffery
2019-07-31  5:39 ` [PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding Andrew Jeffery
2019-07-31 18:00   ` Rob Herring
2019-07-31  5:39 ` [PATCH net-next v2 2/4] net: phy: Add mdio-aspeed Andrew Jeffery
2019-08-01  3:53   ` Andrew Lunn
2019-07-31  5:39 ` [PATCH net-next v2 3/4] net: ftgmac100: Add support for DT phy-handle property Andrew Jeffery
2019-08-01  3:55   ` Andrew Lunn
2019-07-31  5:39 ` [PATCH net-next v2 4/4] net: ftgmac100: Select ASPEED MDIO driver for the AST2600 Andrew Jeffery
2019-08-01  3:56   ` Andrew Lunn
2019-08-03  0:33 ` [PATCH net-next v2 0/4] net: phy: Add AST2600 MDIO support David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).