From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Lechner Subject: [PATCH v2 0/5] counter: new TI eQEP driver Date: Wed, 7 Aug 2019 14:40:18 -0500 Message-ID: <20190807194023.15318-1-david@lechnology.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-iio@vger.kernel.org, linux-omap@vger.kernel.org Cc: David Lechner , Rob Herring , Mark Rutland , =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren , William Breathitt Gray , Thierry Reding , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org List-Id: devicetree@vger.kernel.org This series adds device tree bindings and a new counter driver for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP). As mentioned in one of the commit messages, to start with, the driver only supports reading the current counter value and setting the min/max values. Other features can be added as the counter subsystem gains support for them. v2 changes: - New patch to move TI PWMSS driver from drivers/pwm/ to drivers/bus/ - Device tree bindings converted to .yaml format - Device tree clock renamed from "fck" to "sysclkout" - Dropped unused index and strobe signals from counter driver - Added synapses and actions to counter driver - Fixed base in of kstrtouint() - Clarifications in commit messages This series has been tested on a BeagleBone Blue with the following script: #!/usr/bin/env python3 from os import path from time import sleep COUNTER_PATH = '/sys/bus/counter/devices' COUNTERS = ['counter0', 'counter1', 'counter2'] COUNT0 = 'count0' COUNT = 'count' FUNCTION = 'function' CEILING = 'ceiling' FLOOR = 'floor' ENABLE = 'enable' cnts = [] for c in COUNTERS: function_path = path.join(COUNTER_PATH, c, COUNT0, FUNCTION) with open(function_path, 'w') as f: f.write('quadrature x4') floor_path = path.join(COUNTER_PATH, c, COUNT0, FLOOR) with open(floor_path, 'w') as f: f.write(str(0)) ceiling_path = path.join(COUNTER_PATH, c, COUNT0, CEILING) with open(ceiling_path, 'w') as f: f.write(str(0xffffffff)) enable_path = path.join(COUNTER_PATH, c, COUNT0, ENABLE) with open(enable_path, 'w') as f: f.write('1') cnt_path = path.join(COUNTER_PATH, c, COUNT0, COUNT) cnts.append(open(cnt_path, 'r')) while True: for c in cnts: c.seek(0) val = int(c.read()) if val >= 0x80000000: val -= 0x100000000 print(val, end=' ') print() sleep(1) David Lechner (5): bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem dt-bindings: counter: new bindings for TI eQEP counter: new TI eQEP driver ARM: dts: am33xx: Add nodes for eQEP ARM: dts: am335x-boneblue: Enable eQEP .../devicetree/bindings/counter/ti-eqep.yaml | 50 ++ MAINTAINERS | 6 + arch/arm/boot/dts/am335x-boneblue.dts | 54 ++ arch/arm/boot/dts/am33xx-l4.dtsi | 27 + drivers/bus/Kconfig | 9 + drivers/bus/Makefile | 1 + drivers/{pwm/pwm-tipwmss.c => bus/ti-pwmss.c} | 0 drivers/counter/Kconfig | 12 + drivers/counter/Makefile | 1 + drivers/counter/ti-eqep.c | 460 ++++++++++++++++++ drivers/pwm/Kconfig | 9 - drivers/pwm/Makefile | 1 - 12 files changed, 620 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/counter/ti-eqep.yaml rename drivers/{pwm/pwm-tipwmss.c => bus/ti-pwmss.c} (100%) create mode 100644 drivers/counter/ti-eqep.c -- 2.17.1